Effect of low fluency dentin conditioning on tensile bond strength of composite bonded to Er:YAG laser-prepared dentin: a preliminary study.

Several studies in the literature have previously shown that the bond strength of a composite bonded to dentin is almost equivalent as when dentin is prepared by either bur or Er:YAG laser. The aim of this preliminary study is to assess the hypothesis that dentin conditioning at low fluency by means of Er:YAG laser can improve the value of adhesion of composites resin to dentin. Sixty surfaces of caries-free human third molars extracted for orthodontic purposes were randomly divided into five groups of 12 teeth. The bur group was the control, prepared using bur, group L was prepared using Er:YAG 200 mJ, SSP (50 µs), 20 Hz, 15 seconds of sweeping, for groups L80, L100, L120, they were prepared first, with the same parameters of the group L 200, and then they received a conditioning, which is, respectively, 15 s of irradiations at: 80 mJ (SSP, 10 Hz), 100 mJ (SSP, 10 Hz), and 120 mJ (SSP, 10 Hz). All samples were restored in a single-component adhesive system: Xenon (DENTSPLY), and ceramX (DENTSPLY) as the resin composite. The specimens were submitted to tensile bond strength test using a universal testing machine. Data were submitted to statistical analysis using ANOVA coupled to a Tukey-Kramer test at the 95% level. The mean values in MPa were 33.3 for group B, 36.73 for group L 200, 41.7 for group L80, 37.9 for group L100, and 39.1 for group L120. Our results showed that dentin conditioning at a low fluency of 12.58 J/cm(2) per pulse, with 80 mJ output energy and 50-µs pulse duration can significantly improve tensile bond strength of a composite bonded to Er:YAG laser-prepared dentine.

Effect of acid etching duration on tensile bond strength of composite resin bonded to erbium:yttrium-aluminium-garnet laser-prepared dentine. Preliminary study.

The purpose of this study was to compare the tensile bond strength of composite resin bonded to erbium:yttrium-aluminium-garnet (Er:YAG) laser-prepared dentine after different durations of acid etching. The occlusal third of 68 human third molars was removed in order to expose the dentine surface. The teeth were randomly divided into five groups: group B (control group), prepared with bur and total etch system with 15 s acid etching [37% orthophosphoric acid (H(3)PO(4))]; group L15, laser photo-ablated dentine (200 mJ) (laser irradiation conditions: pulse duration 100 micros, air-water spray, fluence 31.45 J/ cm(2), 10 Hz, non-contact hand pieces, beam spot size 0.9 mm, irradiation speed 3 mm/s, and total irradiation time 2 x 40 s); group L30, laser prepared, laser conditioned and 30 s acid etching; group L60, laser prepared, laser conditioned and 60 s acid etching; group L90, laser prepared, laser conditioned and 90 s acid etching. A plot of composite resin was bonded onto each exposed dentine and then tested for tensile bond strength. The values obtained were statistically analysed by analysis of variance (ANOVA) coupled with the Tukey-Kramer test at the 95% level. A 90 s acid etching before bonding showed the best bonding value (P < 0.05) when compared with all the other groups including the control group. There is no significance difference between other groups, nor within each group and the control group. There was a significant increase in tensile bond strength of the samples acid etched for 90 s.

Evaluation of dental pulp temperature rise during photo-activated decontamination (PAD) of caries: an in vitro study.

Photo-activated decontamination (PAD) has been reported in caries treatment as an aid in dentine decontamination. The aim of this study is to verify the harmlessness for pulp vitality of photo-activated decontamination (PAD) in caries treatment. Twenty freshly extracted single-rooted teeth were used. Deep class I cavities with a

Pulp temperature increase during photo-activated disinfection (PAD) of periodontal pockets: an in vitro study.

The capacity of photo-sensitizers, used in combination with laser light to kill micro-organisms has been demonstrated in different studies. Photo-activated disinfection (PAD) has been introduced in periodontology as an aid for disinfection of periodontal pockets. The aim of this study is to verify the harm for dental vitality of the use of PAD in periodontal pockets. Root canals of 24 freshly extracted human teeth where prepared using profiles up to a size of ISO #50 and filled with thermo-conductor paste. A silicon-based false gum was made in which a periodontal pocket was created and filled with photo-sensitizer phenothiazine chloride (phenothiazine-5-ium, 3.7-bis (dimethylamino)-, chloride). The external root surface was irradiated during 60 s with a 660-nm diode laser (output power: 20 mW; power density: 0.090 W/cm(2); Energy density: 5.46 J/cm(2)) using a periodontal tip with a diameter of 1 mm and a length of 7 mm. Temperatures were recorded inside the root canal using a thermocouple. Measurements were recorded every second, starting at 10 s before lasering, during the irradiation and were continued for 150 s after the end of irradiation, and six measurements were done per tooth. An average temperature increase of 0.48 +/- 0.11 degrees C was recorded. Our results demonstrated that pulp temperature increase was lower than 3 degrees C, which is considered to be harmless for pulp injury. Regarding pulp temperature increase, the use of PAD for disinfection of periodontal pockets can be considered as a safe procedure for dental vitality.

Temperature rise during photo-activated disinfection of root canals.

The aim of this study was to determine whether it is safe to use photo-activated disinfection (PAD) during root canal treatment without heating the periodontal tissues. Root canals of 30 freshly extracted single-rooted teeth were prepared using ProFiles up to size ISO 40 and then filled with photo-sensitiser: tolonium blue (1.2 mg/l). The 635 nm diode laser was used with the manufacturer's endo-tip. Samples were irradiated for 150 s (output power 100 mW, approximate energy density 106.16 J/cm(2)). Temperatures were recorded at working length on the external root surface. After 150 s of PAD irradiation, the average temperature rise was 0.16 +/- 0.08 degrees C. All values were lower than the 7 degrees C safety level for periodontal injury. It was concluded that, regarding the temperature increase, the use of PAD in root canals could be considered harmless for periodontal tissues.

[Cytochrome p450 IID6, its role in psychopharmacology]. / Le cytochrome P450 IID6, son rôle en psychopharmacologie.

Cytochrome P450 IID6 has got typical features (genetical polymorphism, competitive inhibition, saturability) which can be at the origin of pharmacokinetic modifications of molecules using it for their metabolism. In the field of pharmacology, many molecules are substrates or inhibitors of this cytochrome. They are presented. The results of a study of the dextromethorphan variation test performed before and after 28 days of clomipramine therapy with depressed patients are explained. They show a significant decreasing of the cytochrome P450 IID6 oxidation capacities between both of these times. A patient has passed from the phenotype "effective metabolizer" to the one of "poor metabolizer" with clomipramine.