Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 6 de 6
Filter
Add more filters










Database
Language
Publication year range
1.
Glob Chang Biol ; 20(1): 61-75, 2014 Jan.
Article in English | MEDLINE | ID: mdl-23966281

ABSTRACT

Migrations between different habitats are key events in the lives of many organisms. Such movements involve annually recurring travel over long distances usually triggered by seasonal changes in the environment. Often, the migration is associated with travel to or from reproduction areas to regions of growth. Young anadromous Atlantic salmon (Salmo salar) emigrate from freshwater nursery areas during spring and early summer to feed and grow in the North Atlantic Ocean. The transition from the freshwater ('parr') stage to the migratory stage where they descend streams and enter salt water ('smolt') is characterized by morphological, physiological and behavioural changes where the timing of this parr-smolt transition is cued by photoperiod and water temperature. Environmental conditions in the freshwater habitat control the downstream migration and contribute to within- and among-river variation in migratory timing. Moreover, the timing of the freshwater emigration has likely evolved to meet environmental conditions in the ocean as these affect growth and survival of the post-smolts. Using generalized additive mixed-effects modelling, we analysed spatio-temporal variations in the dates of downstream smolt migration in 67 rivers throughout the North Atlantic during the last five decades and found that migrations were earlier in populations in the east than the west. After accounting for this spatial effect, the initiation of the downstream migration among rivers was positively associated with freshwater temperatures, up to about 10 °C and levelling off at higher values, and with sea-surface temperatures. Earlier migration occurred when river discharge levels were low but increasing. On average, the initiation of the smolt seaward migration has occurred 2.5 days earlier per decade throughout the basin of the North Atlantic. This shift in phenology matches changes in air, river, and ocean temperatures, suggesting that Atlantic salmon emigration is responding to the current global climate changes.


Subject(s)
Animal Migration , Climate Change , Salmo salar/physiology , Animals , Chlorophyll/analysis , Chlorophyll A , Oceans and Seas , Rivers , Temperature , Time Factors
2.
Acta Orthop ; 83(4): 411-9, 2012 Aug.
Article in English | MEDLINE | ID: mdl-22880714

ABSTRACT

BACKGROUND AND PURPOSE: Intermittent administration of parathyroid hormone (PTH) has an anabolic effect on bone, as confirmed in human osteoporosis studies, distraction osteogenesis, and fracture healing. PTH in rat models leads to improved fixation of implants in low-density bone or screw insertion transcortically. MATERIAL AND METHODS: We examined the effect of human PTH (1-34) on the cancellous osseointegration of unloaded implants inserted press-fit in intact bone of higher animal species. 20 dogs were randomized to treatment with human PTH (1-34), 5 µg/kg/day subcutaneously, or placebo for 4 weeks starting on the day after insertion of a cylindrical porous coated plasma-sprayed titanium alloy implant in the proximal metaphyseal cancellous bone of tibia. Osseointegration was evaluated by histomorphometry and fixation by push-out test to failure. RESULTS: Surface fraction of woven bone at the implant interface was statistically significantly higher in the PTH group by 1.4 fold with (median (interquartile range) 15% (13-18)) in the PTH group and 11% (7-13) in control. The fraction of lamellar bone was unaltered. No significant difference in bone or fibrous tissue was observed in the circumferential regions of 0-500, 500-1,000, and 1,000-2,000 µm around the implant. Mechanically, the implants treated with PTH showed no significant differences in total energy absorption, maximum shear stiffness, or maximum shear strength. INTERPRETATION: Intermittent treatment with PTH (1-34) improved histological osseointegration of a prosthesis inserted press-fit at surgery in cancellous bone, with no additional improvement of the initial mechanical fixation at this time point.


Subject(s)
Osseointegration/drug effects , Parathyroid Hormone/administration & dosage , Prostheses and Implants , Prosthesis Design , Tibia/surgery , Alloys/therapeutic use , Animals , Biomechanical Phenomena , Coated Materials, Biocompatible , Disease Models, Animal , Dogs , Drug Administration Schedule , Humans , Injections, Subcutaneous , Male , Osseointegration/physiology , Photomicrography , Prosthesis Implantation/methods , Random Allocation , Reference Values , Shear Strength , Tibia/pathology , Titanium/therapeutic use , Treatment Outcome
3.
Calcif Tissue Int ; 88(4): 294-303, 2011 Apr.
Article in English | MEDLINE | ID: mdl-21253714

ABSTRACT

Parathyroid hormone (PTH) administered intermittently is a bone-building peptide. In joint replacements, implants are unavoidably surrounded by gaps despite meticulous surgical technique and osseointegration is challenging. We examined the effect of human PTH(1-34) on implant fixation in an experimental gap model. We inserted cylindrical (10 × 6 mm) porous coated titanium alloy implants in a concentric 1-mm gap in normal cancellous bone of proximal tibia in 20 canines. Animals were randomized to treatment with PTH(1-34) 5 µg/kg daily. After 4 weeks, fixation was evaluated by histomorphometry and push-out test. Bone volume was increased significantly in the gap. In the outer gap (500 µm), the bone volume fraction median (interquartile range) was 27% (20-37%) for PTH and 10% (6-14%) for control. In the inner gap, the bone volume fraction was 33% (26-36%) for PTH and 13% (11-18%) for control. At the implant interface, the bone fraction improved with 16% (11-20%) for PTH and 10% (7-12%) (P = 0.07) for control. Mechanical implant fixation was improved for implants exposed to PTH. For PTH, median (interquartile range) shear stiffness was significantly higher (PTH 17.4 [12.7-39.7] MPa/mm and control 8.8 [3.3-12.4] MPa/mm) (P < 0.05). Energy absorption was significantly enhanced for PTH (PTH 781 [595-1,198.5] J/m(2) and control 470 [189-596] J/m(2)). Increased shear strength was observed but was not significant (PTH 3.0 [2.6-4.9] and control 2.0 [0.9-3.0] MPa) (P = 0.08). Results show that PTH has a positive effect on implant fixation in regions where gaps exist in the surrounding bone. With further studies, PTH may potentially be used clinically to enhance tissue integration in these challenging environments.


Subject(s)
Parathyroid Hormone/therapeutic use , Porosity , Alloys , Animals , Biomechanical Phenomena , Bone and Bones/pathology , Coated Materials, Biocompatible/pharmacology , Dogs , Hormones/metabolism , Male , Materials Testing , Orthopedics/methods , Prostheses and Implants , Stress, Mechanical , Tibia/pathology
4.
Acta Orthop ; 80(4): 499-504, 2009 Aug.
Article in English | MEDLINE | ID: mdl-19634022

ABSTRACT

BACKGROUND AND PURPOSE: Hydroxyapatite (HA) coating stimulates the osseointegration of cementless orthopedic implants. Recently, locally released osteogenic growth factors have also been shown experimentally to stimulate osseointegration so that bone fills gaps around orthopedic implants. Here, we have compared the effect of local release of TGF-beta1 and IGF-1 with that of hydroxyapatite coating on implant fixation. METHOD: Weight-bearing implants with a 0.75-mm surrounding gap were inserted bilaterally in the knees of 10 dogs. Growth factors were incorporated in a biodegradable poly(D,L-lactide) coating on porous coated titanium implants. Plasma-sprayed HA implants served as controls. The dogs were killed at 4 weeks and the implants were evaluated by mechanical push-out test and by histomorphometry. RESULTS: There was no difference in any of the mechanical parameters. Bone ongrowth was 3-fold higher for HA-coated implants (p < 0.001). For growth factor-coated implants, bone volume was 26% higher in the inner half of the gap and 28% higher in the outer half compared to HA (p < 0.03). INTERPRETATION: The mechanical fixation of porous-coated titanium implants with local growth factor release is comparable to that of HA coating. While HA mainly stimulated bone ongrowth, local release of TGF-beta1 and IGF-1 stimulated gap healing.


Subject(s)
Bone Substitutes/pharmacology , Coated Materials, Biocompatible/pharmacology , Implants, Experimental , Insulin-Like Growth Factor I/pharmacology , Osseointegration/drug effects , Transforming Growth Factor beta1/pharmacology , Animals , Dogs , Durapatite , Stress, Mechanical , Titanium
5.
Acta Orthop ; 77(5): 791-8, 2006 Oct.
Article in English | MEDLINE | ID: mdl-17068713

ABSTRACT

BACKGROUND: Impacted morselized bone allograft is a well-established way of giving joint arthroplasties additional support in situations where there is insufficient bone stock. For long-term survival of the implant, early implant fixation is important. We hypothesized that Col-loss, a bone protein lyophilisate, might improve early implant fixation of allografted implants. METHOD: We inserted 4 porous-coated Ti implants in the distal femurs of 16 dogs. All implants were surrounded by a 2.5-mm gap, which was impacted with morselized allograft with or without Colloss. In each dog, the implants were treated with no Collos or low-, middle- or high-dose (0, 10, 20 and 40 mg) Colloss per cm3 allograft. The observation time was 4 weeks. RESULTS: Mechanical implant fixation was improved for all 3 groups with Colloss-treated implants (p < 0.05). The best anchorage was seen in the middle-dose group, where fixation was improved by 100%. We saw a dramatic reduction in fibrous tissue on the surface of the Colloss-treated implants (p < 0.001). The Colloss groups showed increased ongrowth of new bone (p < 0.01) and accelerated gap remodeling (p < 0.05). INTERPRETATION: Colloss can improve early osseointegration and fixation of allografted implants.


Subject(s)
Arthroplasty, Replacement/methods , Bone Substitutes/administration & dosage , Coated Materials, Biocompatible/administration & dosage , Osseointegration/physiology , Animals , Biomechanical Phenomena , Cattle , Dogs , Femur/physiology , Implants, Experimental , Transplantation, Homologous
6.
Acta Orthop ; 77(5): 799-805, 2006 Oct.
Article in English | MEDLINE | ID: mdl-17068714

ABSTRACT

BACKGROUND: Osteogenic growth factors have been suggested to enhance the fixation of implants used in joint replacement. We examined the effect of locally delivered transforming growth factor-beta1 and insulin-like growth factor-1 in a biodegradable poly (D, L-lactide) coating. MATERIAL AND METHODS: In a paired study using 9 dogs, unloaded titanium implants surrounded by a 1-mm gap were inserted into the proximal humerus. The growth factors were incorporated in a poly (D, L-lactide) coating at a 1% (w/w) ratio of TGF-beta1 and a 5% (w/w) ratio of IGF-1. Control implants were uncoated. After 4 weeks, the implants were evaluated by mechanical push-out test and by histomorphometry. RESULTS: A twofold increase was seen in mechanical fixation (strength, stiffness, energy absorption) for the growth factor-treated implants (p = 0.04). Similar results were seen in histomorphometry, as bone ongrowth was 2.5 times higher (p = 0.02), and gap healing was 30-110% higher (p = 0.04) for the growth factor-treated implants than for the control implants. Ongrowth of fibrous tissue was eliminated by the treatment. INTERPRETATION: TGF-beta-1 and IGF-1, locally delivered in a biodegradable poly(D,L-lactide) coating, enhance the mechanical fixation and osseointegration of titanium implants in cancellous bone, and no fibrous tissue is produced in the growth factor treated implants.


Subject(s)
Arthroplasty, Replacement/methods , Coated Materials, Biocompatible/administration & dosage , Implants, Experimental , Insulin-Like Growth Factor I/administration & dosage , Titanium , Transforming Growth Factor beta/administration & dosage , Animals , Biomechanical Phenomena , Dogs , Humerus/physiology , Materials Testing , Osseointegration/physiology
SELECTION OF CITATIONS
SEARCH DETAIL
...