Accuracy comparison of scan segmental sequential ranges with two intraoral scanners for maxilla and mandible.

Background/purpose: The accuracy of a full-arch scan by using an intraoral scanner should be validated under clinical conditions. This study aimed to compare the accuracy of full-arch digital impressions in the maxilla and mandible using two intra oral scanners with three different scan segmental sequential ranges. Materials and methods: A dental model with 28 teeth in their normal positions served as the reference. Sixty full-arch scans were performed using Trios 3 and Trios 4, employing scanning strategy O (manufacturer's original method), OH (segmental sequential ranges one half), and TQ (segmental sequential ranges third quarter). Trueness was evaluated by comparing digital impressions with a reference dataset using specialized software. One-way ANOVA and Tukey tests assessed differences between the groups. Results: For Trios 3 on the maxilla, no significant difference was found among the groups of trueness; in the mandible, strategy O exhibited a significant difference (P = 0.008) with the highest deviation. For Trios 4 on the maxilla, strategy TQ demonstrated the lowest deviation with a significant difference (P = 0.006); in the mandible, no significant difference was found among the groups of trueness. Conclusion: Strategy TQ exhibited the best trueness for Trios 3 and Trios 4, suggesting it may be preferred for higher accuracy. Clinicians should consider these findings when selecting scanning strategies and intraoral scanners for specific cases.

Trueness of intraoral scanning for different tooth-size arch-length deficiencies.

Background/purpose: As science and technology continue to advance, the utilization of intraoral scanners (IOSs) has become increasingly popular in the orthodontic workflow. The aim of this study was to discuss whether the degree of crowded arches affects scan accuracy. Materials and methods: Three different crowding levels of dental models (model MI: mild, model MO: moderate, and model SE: severe) were scanned using both an IOS and desktop scanner. Stereolithographic files were obtained and superimposed via CAD software to calculate differences between each measuring point of a model and the farthest corresponding point. The deviations from three models were compared with statistical analysis. Results: The trueness of different crowding arches showed that the deviation value of model SE was the maximum, followed by model MI, and model MO in the maxillary arch. In the mandibular arch, the order of the deviation from greatest to least was firstly model SE, then model MO, and model MI. Significant differences were observed among the maxillary models (P < 0.001), but there was no significant difference between models in the mandible (P = 0.669). Conclusion: The trueness of the three crowded arches is in the clinically acceptable range. The degree of crowding increases, the trueness of scanning at each position decreases. In the maxillary arch, more severe crowding corresponds to higher deviations. In the mandible, the degree of crowding is not explicitly related to the maximum deviation; therefore, the clinician should notice the deviation when using IOSs for crowding cases.

Convolutional-neural-network-based radiographs evaluation assisting in early diagnosis of the periodontal bone loss via periapical radiograph.

Background/Purpose: The preciseness of detecting periodontal bone loss is examiners dependent, and this leads to low reliability. The need for automated assistance systems on dental radiographic images has been increased. To the best of our knowledge, no studies have quantitatively and automatically staged periodontitis using dental periapical radiographs. The purpose of this study was to evaluate periodontal bone loss and periodontitis stage on dental periapical radiographs using deep convolutional neural networks (CNNs). Materials and methods: 336 periapical radiographic images (teeth: 390) between January 2017 and December 2019 were collected and de-identified. All periapical radiographic image datasets were divided into training dataset (n = 82, teeth: 123) and test dataset (n = 336, teeth: 390). For creating an optimal deep CNN algorithm model, the training datasets were directly used for the segmentation and individual tooth detection. To evaluate the diagnostic power, we calculated the degree of alveolar bone loss deviation between our proposed method and ground truth, the Pearson correlation coefficients (PCC), and the diagnostic accuracy of the proposed method in the test datasets. Results: The periodontal bone loss degree deviation between our proposed method and the ground truth drawn by the three periodontists was 6.5 %. In addition, the overall PCC value of our proposed system and the periodontists' diagnoses was 0.828 (P < 0.01). The total diagnostic accuracy of our proposed method was 72.8 %. The diagnostic accuracy was highest for stage III (97.0 %). Conclusion: This tool helps with diagnosis and prevents omission, and this may be especially helpful for inexperienced younger doctors and doctors in underdeveloped countries. It could also dramatically reduce the workload of clinicians and timely access to periodontist care for people requiring advanced periodontal treatment.

Immediate implant placement with and without provisionalization: A comparison of a one-year longitudinal study.

Background/purpose: Immediate implant placement (IIP) with and without immediate provisionalization (Ipro) may yield satisfactory results in appropriate indications and treatment, especially in the esthetic zone. The aim of this study was to compare implant stability, marginal bone loss (MBL), survival rates, and patient satisfaction between IIP with Ipro and IIP without Ipro. Materials and methods: Seventy patients, each with a failed maxillary anterior tooth, were randomly assigned to IIP with Ipro (Group A: n = 35) or IIP without Ipro (Group B: n = 35). Implant stability quotient (ISQ) and standardized periapical radiographs were performed at surgery and at 3, 6, 9, and 12 months postoperatively to investigate implant stability and MBL, respectively. Survival was assessed 1 year after surgery. Patient satisfaction was evaluated with a visual analogue scale (VAS). Results: Primary ISQ and MBL were not significantly different between groups A and B immediately after surgery (P ＞ 0.05). Implant survival was 100% in both groups, and only one mechanical complication was observed. Patient satisfaction was good at definitive crown delivery and postoperatively 1-year in both groups. However, the immediate postoperative VAS score in Group A was significantly higher than that in Group B (P < 0.05). Conclusion: Group A revealed significantly higher secondary ISQ than Group B at postoperatively 3, 6, 9, and 12 months. There were no significant differences between groups A and B in terms of MBL and survival. Notably, patient satisfaction in Group A was significantly higher than in Group B immediately after surgery.

Implant stability and marginal bone level changes: A 2-year prospective pilot study.

Background/purpose: Implant stability is crucial for successful osseointegration. Marginal bone level is considered an important indicator of long-term implant success and stability. The purposes of this study were to investigate 1) the effect of age, gender, bone density, implant length, and implant diameter on insertion torque (IT), primary implant stability quotient (ISQ), and secondary ISQ, 2) the impact of age, gender, bone density, implant length, implant diameter, IT, and ISQ on marginal bone loss (MBL). Materials and methods: Ninety patients who needed implant therapy were enrolled and overall 156 implants were installed to support single crowns. IT and ISQ were recorded for all implants during surgery and ISQ measurements were performed at follow-up visits. Age, gender, bone density, implant length and diameter were also registered. Radiographic evaluation of MBL was performed postoperative immediate (baseline), 3, 6, 9, 12, 18, and 24 months using digital periapical radiographs. Results: Age had little effect on IT and primary ISQ (P > 0.05). Generally, males had higher IT and primary ISQ, but no significant differences between genders were detected. Bone density showed significant effects on IT and primary ISQ. Correlation analysis revealed high positive correlations between IT/bone density and primary ISQ/implant diameter. Significant impacts of bone density and IT on MBL were found. Conclusion: Implant diameter had a more profound impact than length on IT/primary ISQ. Bone density played a considerable role in IT/primary ISQ determination. Bone density and IT had more impacts than primary ISQ on MBL.

Total solution of a smart shade matching.

Background/purpose: The simulated color of restorations plays an important role in improving patient satisfaction. The aim of this study was to test a new intelligent colorimetric solution using the Advanced Reflectionless Technology (ART) monitor and compare them using commercially available shade systems. Materials and methods: Six participants' right maxillary central incisors were tested with three devices, including the AUO Display Plus (Group A), a Canon single-lens reflex camera with eLAB's polar eyes filter (Group E), and the VITA Easyshade V (Group V). Each porcelain tooth was divided into three areas, and was assigned a CIELAB L∗a∗b∗ value by using the VITA Easyshade V. The original data were compared with the CIELAB L∗a∗b∗ obtained using the VITA Easyshade V. A prosthodontist compared the color of the porcelain veneers by eyes and gave the scores from 1 to 3. Results: For the ΔE, the three areas of Group A had the smallest differences between the color of the fabricated teeth and that of the original teeth. Colorimetric analysis indicated that Groups A and V did not differ much in the color of the three areas of the tooth. Groups E and A exhibited significant differences between the cervical third and middle third of the tooth, and Groups E and V exhibited significant differences between the middle third and incisal third of the tooth. Conclusion: Compared with traditional monitors, ART is closer to real images in terms of color, contrast, and detail grayscale. Technicians are able to produce realistic and pleasing colors.

Stress analysis and risk of failure during clenching in ceramic assembly models: 3-dimensional finite element analysis.

Background/purpose: Clenching is a dental parafunctional disorder that jeopardizes the life of teeth and/or dental prostheses. Computer-aided design and computer-aided manufacturing (CAD/CAM)-fabricated or 3-dimensional-printed dental prostheses are aesthetic, strong, and of good quality, but noticeable damage can still be observed after clenching. Stress analysis of synthetic ceramic assemblies with various parameters was conducted to provide data that may be used to improve the fabrication of CAD/CAM-fabricated dental prostheses. Materials and methods: Abaqus software was used to run the simulations. A total of 96 axisymmetric finite element ceramic assembly models were simulated under 800 N vertical loading and different contact radii (0.25, 0.5, 0.75, 1.0 mm), materials (IPS e.max CAD and Vita Enamic), layer thicknesses and combinations. Results: Four-layered ceramic assembly models produced promising results with the following parameters: contact radius of at least 0.5 mm, total thickness of at least 0.5 mm, and use of IPS e.max CAD as the first layer and Vita Enamic as the second layer without cement. Conclusion: The ideal four-layered assembly model design uses 0.25-mm-thick IPS e.max CAD as its outer layer to simulate enamel binding and 0.25-mm-thick Vita Enamic as its inner layer to imitate the natural tooth. This design may be used as reference for prosthodontic treatment.

Investigation on the effect of recasting palladium-silver alloy by argon arc vacuum pressure casting process.

Background/purpose: Palladium-silver (Pd-Ag) alloys are important as an alternative to gold-based alloys. The purpose of this study was to investigate the effect of an argon-arc vacuum pressure casting process on the recasting of the Pd-Ag alloy. Materials and methods: The recasting Pd-Ag alloys were compared with conventional horizontal centrifugal (HC) casting to an argon (Ar)-arc vacuum pressure (Ar-arc/VP) casting. The first-generation castings were made from a Pd-Ag alloy purchased from a supplier. Next-generation castings were made from 50 wt% Pd-Ag alloy before casting and 50 wt% from previous castings. This sequence was repeated over three generations to form the 2nd, 3rd and 4th recasting ingots. The ingots were then measured for marginal accuracy, interfacial oxidation, hardness and phase identification. Results: The recasting success rate of recastibility reached 100%. Compared with the HC group, the Ar-arc/VP group had better edge precision, smaller oxide layer thickness and lower hardness. The comparison of X-ray diffraction intensity showed that the relative intensities of Pd and Ag in the first, second and third generations recasting of the Ar-arc/VP group were significantly higher than those of the HC group. Phase analysis showed that the trace elements of indium and tin contents in the Pd-Ag recasting ingots of the Ar-arc/VP group were higher than those of the HC group. Conclusion: The results showed that the casting process used for recasting affected the quality of the Pd-Ag alloy. Therefore, Ar-arc/VP casting process could improve the effect of Pd-Ag recasting and maintain the alloy properties in comparison with HC casting.

Accuracy of intraoral scanning methods for maxillary Kennedy class I arch.

Background/purpose: The optimal strategy for scanning removable partial dentures remains unknown. This study investigated scanning strategies for patients with a maxillary Kennedy Class I arch as well as the measurement deviations of three scanning strategies. Materials and methods: A standard maxilla model was positioned with a holder in a dental chair to simulate a natural patient position and posture. Standard Tessellation Language files for reference models were formatted with a desktop scanner, and model operation files were obtained with a TRIOS 3 Pod intraoral scanner and superimposed using Exocad computer-aided design software. The three scanning strategies evaluated in this study (Strategy M, T-R, and R-T) were used for nine scans each, and the resulting data were recorded. The deviation of the three strategies was statistically analyzed through one-way ANOVA and Tukey post hoc testing. Results: The trueness of Strategy M, T-R, and R-T was 52.6 ± 31.0, 54.9 ± 27.6, and 50.1 ± 22.3 µm, respectively. No statistically significant differences in trueness were detected among the three groups (P > 0.05). However, Strategy T-R had the evenest distribution of all measuring points. The deviations of the measurements obtained by three scanning strategies were mostly between 30 and 70 µm. The precision of the three strategies was similar as well. Conclusion: Trueness did not differ significantly among the three strategies. However, Strategy T-R is recommended for use with a TRIOS 3 Pod scanner because of its reduction of the seesaw effect and high stabilization of the RPD framework.

Questionnaire survey on the satisfaction of SimEx dental education system.

Background/purpose: The SimEx is dental training system that applies new technology in a computerized dental simulator. The purpose of this study was to understand the usability satisfaction of the SimEx dental education and evaluation system by dental students and dentists at Tohoku University. Materials and methods: In this study, the Tohoku University IRB execution number was 2020-3-33. The number of subjects accepted was 59 at Tohoku University and divided into 4 groups based on years of clinical experience (Group A: 0 years; Group B: 1-2 years; Group C: 2-5 years; Group D: at least 5 years), and a total of 58 usability questionnaires were collected. Subjects completed the SimEx Usability Satisfaction Questionnaire after operating the SimEx (EPED Inc., Kaohsiung, Taiwan) course, which contained 16 questions. Results: Among the 58 questionnaires collected by Tohoku University, there were 19 undergraduate students (4th∼6th grade), 12 post-graduate students, 14 residents, and 13 dentists. Significant differences between Group A and Group B, and between Group A and Group D were found (P < 0.05). The same results were obtained for the "experience satisfaction index". In the items where significant differences were found, longer clinical experience tended to result in lower scores. Conclusion: From these results, we can conclude that the SimEx education and evaluation system facilitates students' self-learning, and this system is very useful for continued study and clinical skill training for dentists, especially for students and junior dentists with high usability satisfaction.

Oxidative-Stress-Mediated ER Stress Is Involved in Regulating Manoalide-Induced Antiproliferation in Oral Cancer Cells.

Manoalide provides preferential antiproliferation of oral cancer but is non-cytotoxic to normal cells by modulating reactive oxygen species (ROS) and apoptosis. Although ROS interplays with endoplasmic reticulum (ER) stress and apoptosis, the influence of ER stress on manoalide-triggered apoptosis has not been reported. The role of ER stress in manoalide-induced preferential antiproliferation and apoptosis was assessed in this study. Manoalide induces a higher ER expansion and aggresome accumulation of oral cancer than normal cells. Generally, manoalide differentially influences higher mRNA and protein expressions of ER-stress-associated genes (PERK, IRE1α, ATF6, and BIP) in oral cancer cells than in normal cells. Subsequently, the contribution of ER stress on manoalide-treated oral cancer cells was further examined. ER stress inducer, thapsigargin, enhances the manoalide-induced antiproliferation, caspase 3/7 activation, and autophagy of oral cancer cells rather than normal cells. Moreover, N-acetylcysteine, an ROS inhibitor, reverses the responses of ER stress, aggresome formation, and the antiproliferation of oral cancer cells. Consequently, the preferential ER stress of manoalide-treated oral cancer cells is crucial for its antiproliferative effect.

Combined Treatment (Ultraviolet-C/Physapruin A) Enhances Antiproliferation and Oxidative-Stress-Associated Mechanism in Oral Cancer Cells.

Physapruin A (PHA), a Physalis peruviana-derived withanolide, exhibits antiproliferation activity against oral and breast cancer cells. However, its potential antitumor effects in combined treatments remain unclear. This investigation focused on evaluating the impact of the combined treatment of ultraviolet-C with PHA (UVC/PHA) on the proliferation of oral cancer cells. The UVC-caused antiproliferation was enhanced by combination with PHA in oral cancer (Ca9-22 and CAL 27) but not normal cells (SG), as evidenced by ATP detection, compared with UVC or PHA alone. UVC/PHA showed a greater extent of subG1 increase, G2/M arrest, annexin-V-assessed apoptosis, caspase 3/7 activation, and reactive oxygen species (ROS) in the UVC or PHA treatment of oral cancer compared to normal cells. Moreover, the mitochondrial functions, such as mitochondrial superoxide bursts and mitochondrial membrane potential destruction, of oral cancer cells were also enhanced by UVC/PHA compared to UVC or PHA alone. These oxidative stresses triggered γH2AX and 8-hydroxyl-2'-deoxyguanosine-assessed DNA damage to a greater extent under UVC/PHA treatment than under UVC or PHA treatment alone. The ROS inhibitor N-acetylcysteine reversed all these UVC/PHA-promoted changes. In conclusion, UVC/PHA is a promising strategy for decreasing the proliferation of oral cancer cells but shows no inhibitory effect on normal cells.

The influence of cone beam computed tomography on IRIS-100 implant navigation system.

Background/purpose: Cone beam computed tomography (CBCT) is frequently used in dental diagnosis and treatment. Comparative studies of the effects of CBCT on implant navigation, however, are still limited. The objective of this study was to evaluate whether the computed tomography images of the four commercial brands will affect the accuracy of the new version of IRIS implant navigation system. Materials and methods: In the first part, the accuracy of the IRIS implant navigation system was evaluated by a precision confirmation jig whose position is confirmed. In the second part, the IRIS implant navigation system was used in conjunction with 4 brands of CBCT scans analyzed by its effect on accuracy. Results: The results showed that the mean deviation of the new version of IRIS-100 system accuracy was less than 1 mm. Among the four groups, the overall average deviation caused by CBCT images showed that the 3D eXam group had the smallest error of approximately 0.94 ± 0.12 mm and the AZ 3000 CT group had the largest error of approximately 1.34 ± 0.10 mm. Conclusion: Based on the study, the accuracy of the IRIS implant navigation system will vary with the CBCT image resolution and the status of the CBCT machine.

CD44 Mediates Oral Squamous Cell Carcinoma-Promoting Activity of MRE11 via AKT Signaling.

Oral cancer is one of the highest-incidence malignancies worldwide, with the occurrence of oral squamous cell carcinoma (OSCC) being the most frequently diagnosed form. A barrier for oral cancer management may arise from tumor cells that possess properties of cancer stemness, which has been recognized as a crucial factor in tumor recurrence and metastasis. As such, understanding the molecular mechanisms underlying these tumor cells may provide insights for improving cancer treatment. MRE11 is the core protein of the RAD50/MRE11/NBS1 complex with a primary role in DNA damage repair, and it has been diversely associated with tumor development including OSCC. In this study, we aimed to investigate the engagement of CD44, a cancer stemness marker functioning in the control of cell growth and motility, in OSCC malignancy under the influence of MRE11. We found that overexpression of MRE11 enhanced CD44 expression and tumorsphere formation in OSCC cells, whereas knockdown of MRE11 reduced these phenomena. In addition, the MRE11-promoted tumorsphere formation or cell migration ability was compromised in OSCC cells carrying siRNA that targets CD44, as was the MRE11-promoted AKT phosphorylation. These were further supported by analyzing clinical samples, where higher CD44 expression was associated with lymph node metastasis. Additionally, a positive correlation between the expression of MRE11 and CD44, or that of CD44 and phosphorylated AKT, was observed in OSCC tumor tissues. Finally, the expression of CD44 was found to be higher in the metastatic lung nodules from mice receiving tail vein-injection with MRE11-overexpressing OSCC cells compared with control mice, and a positive correlation between CD44 and phosphorylated AKT was also observed in these metastatic lung nodules. Altogether, our current study revealed a previously unidentified mechanism linking CD44 and AKT in MRE11-promoted OSCC malignancy, which may shed light to the development of novel therapeutic strategies in consideration of this new pathway in OSCC.

Contact fracture test of monolithic hybrid ceramics on different substrates for bruxism.

OBJECTIVES: To determine the minimum thickness required for a monolithic hybrid ceramic crown on different substrates (soft vs stiff) used in posterior dentition for bruxism. METHODS: 80 polymer-infiltrated ceramic networks Vita Enamic (PICN VE) disc specimens with four different occlusal thicknesses (0.8, 1.2, 1.6 and 2.0 mm), were produced using a computer-aided design/manufacturing system, and cemented on a stiff (zirconia) or soft (polyamide) substrate of 4-mm thickness. The ten specimens, in soft or stiff groups, were subjected to compressive loading by a MTS machine until fracture or maximum load (4500 N) was reached. The unbroken specimens were examined using optical coherence tomography. Eight axisymmetric finite element models and eight 3D models comprising the four different occlusal thicknesses and two substrates under different vertical loads and sliding movements were constructed. The maximum principal stress was selected to evaluate the stress distribution in this study. RESULTS: The fracture resistance of the specimens was significantly different between the two substrates (P < 0.001). Fracture resistance was positively associated with specimen thickness (r = 0.597 and 0.896 for the soft and stiff substrate respectively). Specimens on the soft substrate had lower fracture loads, whilst cone cracks were observed in unbroken samples on different soft/stiff substrate prior to final fracture. The finite element analysis confirmed that samples on the stiff substrate had lower maximum principal stress values than those on the soft substrate. For the maximum principal stress not to exceed the flexural strength of PICN VE, a stiff substrate and minimum thickness of 2.0 mm are required for the prostheses. SIGNIFICANCE: A minimum 2.0 mm thick, stiff substrate was needed for bruxism as shown by the effect of high/large chewing force on the posterior dentition of monolithic PICN VE crowns.

Comparison of optical and crystal properties of three translucent yttria-stabilized tetragonal zirconia polycrystals with those of lithium disilicate glass-ceramic material.

BACKGROUND/PURPOSE: Among the ceramic materials used for all-ceramic crowns, zirconia has high biocompatibility and favorable mechanical properties, but its main drawbacks include low translucency and stress-induced phase transformation. To stabilize high-strength tetragonal zirconia polycrystal (TZP), 3-5 mol% yttria is usually added to prepare yttria-stabilized TZP (Y-TZP). In this study, the optical properties of three commercial Y-TZP ceramics were compared with those of the clinically available glass-ceramic material of lithium disilicate, and the relationship between translucency and crystal properties was analyzed in vitro. MATERIALS AND METHODS: Twelve 5-mm-thick standardized disks were prepared from three Y-TZP ceramics and one lithium disilicate block. Absolute translucency was measured using a spectrophotometer with an integrating sphere. X-ray diffraction was used to quantify the main structural parameters (i.e., preferred plane, quantitative phase, and grain size) of Y-TZP crystals. RESULTS: The product-dominated phase of Y-TZP exhibited a tetragonal lattice pattern, and the preferred planes had minor variations. The diffraction patterns of the three Y-TZP ceramics demonstrated minor effects on translucency, without significant differences (p > 0.05). The grain size of 54-70 nm was negatively related to translucency in Y-TZP. Lithium disilicate specimens had significantly higher translucency than the three Y-TZP specimens (p < 0.001). CONCLUSION: Grain size reduction played an essential role in developing highly translucent Y-TZP ceramics. The three Y-TZP ceramics were essentially opaque but exhibited poorer translucency than lithium disilicate in terms of esthetics.

Genetic and Proteinic Linkage of MAO and COMT with Oral Potentially Malignant Disorders and Cancers of the Oral Cavity and Pharynx.

Betel quid (BQ), a group I human carcinogen, strongly contributes to an increased risk of oral potentially malignant disorders (OPMD) and cancers of the oral cavity and pharynx. This study was conducted to discover whether monoamine oxidase (MAO) and catechol-O-methyltransferase (COMT) variants play a potential role in the risk assessment of oral cavity and pharynx cancers and OPMD, particularly among BQ users. We applied a case-control study to confirm the polymorphism of MAO and COMT using single-nucleotide polymorphisms. We used qRT-PCR, Western blotting, and immunohistochemistry (IHC) to determine MAO and COMT expression. Carriers of the MAOA rs6323 G-allele, MAOB rs6324 G-allele, and COMT rs4633 C/C-genotype had a prominently increased risk of oral cavity and pharynx cancers (AOR = 56.99; p < 0.001). Compared to adjacent noncancerous tissues, a significant downregulation of MAO and COMT expression was exhibited in cancerous tissues (p < 0.01). Furthermore, in different cell models, MAO and COMT expression was significantly downregulated with an increased dose of arecoline (p < 0.01). In personalized preventive medicine for oral and pharyngeal cancers, our findings are the first to demonstrate the potential role of lower MAO and COMT expression levels, with the risk polymorphisms utilized as clinical biomarkers.

Evaluation of the Feasibility of NaCaPO4-Blended Zirconia as a New CAD/CAM Material for Dental Restoration.

The computer-aided design/computer-aided manufacturing (CAD/CAM) fabrication technique has become one of the hottest topics in the dental field. This technology can be applied to fixed partial dentures, removable dentures, and implant prostheses. This study aimed to evaluate the feasibility of NaCaPO4-blended zirconia as a new CAD/CAM material. Eleven different proportional samples of zirconia and NaCaPO4 (xZyN) were prepared and characterized by X-ray diffractometry (XRD) and Vickers microhardness, and the milling property of these new samples was tested via a digital optical microscope. After calcination at 950 °C for 4 h, XRD results showed that the intensity of tetragonal ZrO2 gradually decreased with an increase in the content of NaCaPO4. Furthermore, with the increase in NaCaPO4 content, the sintering became more obvious, which improved the densification of the sintered body and reduced its porosity. Specimens went through milling by a computer numerical control (CNC) machine, and the marginal integrity revealed that being sintered at 1350 °C was better than being sintered at 950 °C. Moreover, 7Z3N showed better marginal fit than that of 6Z4N among thirty-six samples when sintered at 1350 °C (p < 0.05). The milling test results revealed that 7Z3N could be a new CAD/CAM material for dental restoration use in the future.

Low Dose Combined Treatment with Ultraviolet-C and Withaferin a Enhances Selective Killing of Oral Cancer Cells.

Withaferin A (WFA), a Withania somnifera-derived triterpenoid, is an anticancer natural product. The anticancer effect of nonionizing radiation such as ultraviolet-C (UVC) as well as the combined treatment of UVC and WFA is rarely investigated. Low dose UVC and/or WFA treatments (12 J/m2 and/or 1 µM) were chosen to evaluate antioral cancer cell line effects by examining cytotoxicity, cell cycle disruption, apoptosis induction, and DNA damage. For two cancer cell lines (Ca9-22 and HSC-3), single treatment (UVC or WFA) showed about 80% viability, while a combined treatment of UVC/WFA showed about 40% viability. In contrast, there was noncytotoxicity to normal oral cell lines (HGF-1). Compared to single treatment and control, low dose UVC/WFA shows high inductions of apoptosis in terms of flow cytometric detections for subG1, annexin V, pancaspase changes as well as Western blotting for detecting cleaved poly (ADP-ribose) polymerase (c-PARP) and caspase 3 (c-Cas 3) and luciferase assay for detecting Cas 3/7 activity. Low dose UVC/WFA also showed high inductions of oxidative stress and DNA damage in terms of flow cytometric detections of reactive oxygen species (ROS), mitochondrial superoxide (MitoSOX) generation, and membrane potential (MitoMP) destruction, γH2AX and 8-oxo-2'deoxyguanosine (8-oxodG) types of DNA damages. For comparison, low dose UVC/WFA show rare inductions of annexin V, Cas 3/7 activity, ROS, MitoSOX, and MitoMP changes to normal oral HGF-1 cells. Therefore, low dose UVC/WFA provides a novel selectively killing mechanism to oral cancer cells, suggesting that WFA is a UVC sensitizer to inhibit the proliferation of oral cancer cells.

Comparing Accuracy of Implant Installation with a Navigation System (NS), a Laboratory Guide (LG), NS with LG, and Freehand Drilling.

The aim of this study was to compare the accuracy of implant placement by using the conventional freehand method, the surgical guide alone, the dental navigation system alone, and the dental navigation system with a surgical guide. The participants were aged 20 years or older and were requiring dental implant surgery according to an assessment made by a dentist between July 2014 and December 2017. A total of 128 dental implants were inserted, 32 dental implants in each group, and participants with similar or identical age (i.e., 20-50 years or 50 years or above) and missing tooth locations were paired for comparison. Accuracy was measured by overlaying the real position in the postoperative Cone Beam Computerized Tomography (CBCT) on the virtual presurgical placement of the implant in a CBCT image. Using the dental navigation system with a surgical guide could help dentists to position implants more accurately. Total, longitudinal, and angular error deviation were significantly different (p < 0.0001). The same level of accuracy could be obtained for the different jaws and tooth positions. The one-way analysis of variance (ANOVA) showed that the total, longitudinal, and angular errors differed significantly (p < 0.0001). A comparison of the four dental implant surgical methods indicated that the combination of a dental implant navigation system and a surgical guide kit achieved the highest accuracy in terms of the different tooth positions and jaws.