ABSTRACT
STUDY DESIGN: Retrospective Database Study. OBJECTIVE: Investigate utilization of bone morphogenetic protein (BMP-2) between 2004 and 2014. SUMMARY OF BACKGROUND DATA: The utilization, particularly off-label utilization, of BMP-2 has been controversial and debated in the literature. Given the concerns regarding cancer and potential complications, the risk benefit profile of BMP must be weighed with each surgical case. The debate regarding the costs and potential side effects of BMP-2 compared with autologous iliac crest bone harvest has continued. METHODS: The National Inpatient Sample (NIS) database was queried for the use of BMP-2 (ICD-9-CM 84.52) between 2004 and 2014 across 44 states. The NIS database represents a 20% sample of discharges, weighted to provide national estimates. BMP-2 utilization rates in spine surgery fusion procedures were calculated as a fraction of the total number of thoracic, lumbar, and sacral spinal fusion surgeries performed each year. RESULTS: Between 2004 and 2014, BMP-2 was utilized in 927,275 spinal fusion surgeries. In 2004, BMP-2 was utilized in 28.3% of all cases (N=48,613). The relative use of BMP-2 in spine fusion surgeries peaked in 2008 at 47.0% (N=112,180). Since then, it has continued to steadily decline with an endpoint of 23.6% of cases in 2014 (N=60,863). CONCLUSIONS: Throughout the United States, the utilization of BMP-2 in thoracolumbar fusion surgeries increased from 28.3% to 47.0% between 2004 and 2008. However, from 2008 to 2014, the utilization of BMP-2 in thoracolumbar spine fusion surgeries decreased significantly from 47.0% to 23.4%. While this study provides information on the utilization of BMP-2 for the entire United States over an 11-year period, further research is needed to the determine the factors affecting these trends.
Subject(s)
Bone Morphogenetic Protein 2 , Spinal Fusion , Bone Morphogenetic Protein 2/therapeutic use , Humans , Lumbosacral Region , Retrospective Studies , Spinal Fusion/methods , United StatesABSTRACT
BACKGROUND CONTEXT: Modernization of 3D printing has allowed for the production of porous titanium interbody cages (3D-pTi) which purportedly optimize implant characteristics and increase osseointegration; however, this remains largely unstudied in vivo. PURPOSE: To compare osseointegration of three-dimensional (3D) titanium cages without bone graft and Polyether-ether-ketone (PEEK) interbody cages with autologous iliac crest bone graft (AICBG). STUDY DESIGN: Animal study utilizing an ovine in vivo model of lumbar fusion. METHODS: Interbody cages of PEEK or 3D-pTi supplied by Spineart SA (Geneva, Switzerland) were implanted in seven living sheep at L2-L3 and L4-L5, leaving the intervening disc space untreated. Both implant materials were used in each sheep and randomized to the aforementioned disc spaces. Computed tomography (CT) was obtained at 4 weeks and 8 weeks. MicroCT and histological sections were obtained to evaluate osseointegration. RESULTS: MicroCT demonstrated osseous in-growth of native cancellous bone in the trabecular architecture of the 3D-pTi interbody cages and no interaction between the PEEK cages with the surrounding native bone. Qualitative histology revealed robust osseointegration in 3D-pTi implants and negligible osseointegration with localized fibrosis in PEEK implants. Evidence of intramembranous and endochondral ossification was apparent with the 3D-pTi cages. Quantitative histometric bone implant contact demonstrated significantly more contact in the 3D-pTi implants versus PEEK (p<.001); region of interest calculations also demonstrated significantly greater osseous and cartilaginous interdigitation at the implant-native bone interface with the 3D-pTi cages (p=.008 and p=.015, respectively). CONCLUSIONS: 3D-pTi interbody cages without bone graft outperform PEEK interbody cages with AICBG in terms of osseointegration at 4 and 8 weeks postoperatively in an ovine lumbar fusion model. CLINICAL SIGNIFICANCE: 3D-pTi interbody cages demonstrated early and robust osseointegration without any bone graft or additive osteoinductive agents. This may yield early stability in anterior lumbar arthrodesis and potentially bolster the rate of successful fusion. This could be of particular advantage in patients with spinal neoplasms needing post-ablative arthrodesis, where local autograft use would be ill advised.
Subject(s)
Spinal Fusion , Titanium , Animals , Autografts , Benzophenones , Ketones , Lumbar Vertebrae/diagnostic imaging , Lumbar Vertebrae/surgery , Models, Animal , Polyethylene Glycols/pharmacology , Polymers , Printing, Three-Dimensional , Sheep , Spinal Fusion/methodsABSTRACT
STUDY DESIGN: In vitro analysis. OBJECTIVE: The aim of this study was to assess the effect of three-dimensional (3D) printing of porous titanium on human mesenchymal stem cell (hMSC) adhesion, proliferation, and osteogenic differentiation. SUMMARY OF BACKGROUND DATA: A proprietary implant using three-dimensional porous titanium (3D-pTi) that mimics trabecu-lar bone structure, roughness, porosity, and modulus of elasticity was created (Ti-LIFE technology™, Spineart SA Switzerland). Such implants may possess osteoinductive properties augmenting fusion in addition to their structural advantages. However, the ability of 3D-pTi to affect in vitro cellular proliferation and osteogenic differentiation remains undefined. METHODS: Disks of 3D-pTi with a porosity of 70% to 75% and pore size of 0.9 mm were produced using additive manufacturing technology. 2D Ti6Al4V (2D-Ti) and 2D polyetheretherketone (2D-PEEK) disks were prepared using standard manufacturing process. Tissue culture plastic (TCP) served as the control surface. All discs were characterized using 2D-micros-copy, scanning electron microscopy (SEM), and x-ray micro-computed tomography. Forty thousand hMSCs were seeded on the disks and TCP and cultured for 42 days. hMSC morphology was assessed using environmental SEM and confocal imaging following phalloidin staining. hMSC proliferation was evaluated using DNA fluorescent assay. hMSC differentiation was assessed using RT-qPCR for genes involved in hMSC osteogenic differentiation and biochemical assays were performed for alkaline phosphatase activity (ALP) and calcium content. RESULTS: 3D-pTi lead to a higher cell number as compared to 2D-Ti and 2D-PEEK at D21, D28 and D42. ALP activity of hMSCs seeded into 3D-pTi scaffolds was as high as or higher than that of hMSCs seeded onto TCP controls over all time points and consistently higher than that of hMSCs seeded onto 2D-Ti scaffolds. However, when ALP activity was normalized to protein content, no statistical differences were found between all scaffolds tested and TCP controls. CONCLUSION: 3D-pTi provides a scaffold for bone formation that structurally mimics cancellous bone and improves hMSC adhesion and proliferation compared to 2D-Ti and PEEK.
Subject(s)
Mesenchymal Stem Cells , Osteogenesis , Biomimetics , Cancellous Bone , Cell Differentiation , Cell Proliferation , Humans , Ketones/chemistry , Polyethylene Glycols/chemistry , Printing, Three-Dimensional , Tissue Scaffolds/chemistry , Titanium/pharmacology , X-Ray MicrotomographyABSTRACT
BACKGROUND CONTEXT: There are situations that require the replacement of pedicle screws. They are often exchanged when loose or broken or to accommodate a different sized rod or pedicle screw system. Traditionally, pedicle screws are replaced by up-sizing the core diameter until an interference fit is obtained. However, this method carries a risk of pedicle screw breach. PURPOSE: To determine if dual pitch screws, with cancellous pitch in the vertebral body and cortical pitch throughout the pedicle, allows for in-line screw revision without upsizing screw diameter. STUDY DESIGN: Cadaveric biomechanical Study PATIENT SAMPLE: Not applicable OUTCOME MEASURES: Not applicable METHODS: Pedicle screws were tested in the lumbar vertebrae from eleven cadavers. Standard pitch 5.5 mm screws were inserted and loaded using a "break-in" protocol. Screws were removed and replaced with one of four screw types: 5.5 mm Standard Pitch, 5.5 mm Dual Pitch, 6.0 mm Standard Pitch, or 6.0 mm Dual Pitch. Failure testing was done using a stepwise increasing cyclic loading protocol for 100 cycles at each increasing load level. The loading consisted of a combined axial and bending load simulating the load seen by the most inferior screw. RESULTS: Failure was consistent, with the tip of the screw displacing inferiorly into the vertebral body while simultaneously pulling out. Failure strength was lowest in the 5.5mm Standard (135.8±29.4N) followed by 6.0mm Standard (141.8±38.6N), 5.5mm Dual (158.1±53.8N), and 6.0mm Dual (173.6±52.1N, p=.023). There was no difference in the failure strength between the 5.5mm Dual and 6.0mm Standard. Lumbar level (p=.701) and donor spine (p=.062) were not associated with failure strength. CONCLUSIONS: After pedicle screw removal, screws with a larger core diameter or with a dual pitch have similar failure strengths. Dual pitch screws may allow for in-line revision of screws without upsizing screw diameter, minimizing the risk of pedicle breach or fracture. CLINICAL SIGNIFICANCE: Dual pitch screws, with cancellous pitch in the vertebral body and cortical pitch through the pedicle, allows for in-line revision of pedicle screws without upsizing screw diameter; reducing the risk of pedicle breach or fracture when exchanging screws.
Subject(s)
Pedicle Screws , Biomechanical Phenomena , Cadaver , Equipment Failure , Humans , Lumbar Vertebrae/surgery , Lumbosacral RegionABSTRACT
BACKGROUND: With the current opioid crisis, as many as 38% of patients are still on opioids one year after elective spine surgery. Identifying drivers of in-hospital opioid consumption may decrease subsequent opioid dependence. We aimed to identify the drivers of in-hospital opioid consumption in patients undergoing 1-2-level instrumented lumbar fusions. METHODS: This is a retrospective cohort study. Electronic medical record analysts identified consecutive patients undergoing 1-2 level instrumented lumbar fusions for degenerative lumbar conditions from 2016 to 2018 from a single-center hospital administrative database. Oral, intravenous, and transdermal opioid dose administrations were converted to morphine milligram equivalents (MME). Linear regression analysis was used to determine associations between postoperative day (POD) 4 cumulative in-hospital MMEs and the patients' baseline characteristics including body mass index (BMI), race, American Society of Anesthesiologists (ASA) grade, smoking status, marital status, insurance type, zip code, number of fused levels, approach and preoperative opioid use. RESULTS: A total of 1,502 patients were included. The mean cumulative MMEs at POD 4 was 251.5. Linear regression analysis yielded four drivers including younger age, preoperative opioid use, current smokers and more levels fused. There were no associations with surgical approach, zip code, ASA grade, marital status, BMI, race or insurance type. CONCLUSIONS: Use of preoperative opioids and smoking are modifiable risk factors for higher in-hospital opioid consumption and can be targets for intervention prior to surgery in order to decrease in-hospital opioid use.
ABSTRACT
BACKGROUND: Recent work has shed light on the potential benefits of cannabinoids for multimodal pain control following orthopedic procedures. The objective of this review was to summarize the available evidence of analgesic and opioid-sparing effects cannabinoids have in orthopedic surgery and identify adverse events associated with their use. METHODS: A systematic review of the literature using Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines including PubMed, EMBASE, MEDLINE, PsycINFO, and Google Scholar was performed to include all primary, therapeutic studies published on the use of cannabis, and cannabis-derived products in orthopedic surgery. RESULTS: The literature review returned 4292 citations. Thirteen publications were found to meet inclusion criteria. Four randomized controlled trials were evaluated while the remaining studies were of quasi-experimental design. CONCLUSION: Research on cannabinoids in orthopedic surgery is mostly of a quasi-experimental nature and is mainly derived from studies where orthopedics was not the primary focus. The overall results demonstrate potential usefulness of cannabinoids as adjunctive analgesics and in mitigating opioid use. However, the current evidence is far from convincing. There is a need to produce rigorous evidence with well-designed randomized controlled trials specific to orthopedic surgery to further establish these effects.
Subject(s)
Cannabinoids/therapeutic use , Orthopedic Procedures , Pain Management/methods , Pain, Postoperative/drug therapy , Analgesics , Analgesics, Opioid , Cannabinoids/adverse effects , Combined Modality Therapy , Female , Humans , Male , Randomized Controlled Trials as TopicABSTRACT
STUDY DESIGN: Multicenter retrospective study. OBJECTIVE: Flexion-extension radiographs are frequently used to assess motion in patients with degenerative spondylolisthesis. However, they expose patients to additional radiation and increase cost. The aim of this study is to determine if flexion-extension radiographs provide additional information not seen on upright neutral radiographs and supine magnetic resonance imaging (MRI) that may guide surgical decision making. SUMMARY OF BACKGROUND DATA: Supine MRI and upright neutral radiographs are routinely performed in patients with degenerative spondylolisthesis. It is unclear whether additional flexion-extension views play a significant role in surgical planning for this patient population. METHODS: From the Quality Outcomes Database, patients who had surgery for grade 1 degenerative spondylolisthesis were identified. Magnitude of slip on pre-op supine MRI, upright neutral, flexion, and extension radiographs were measured. Additional motion was defined as 3âmm or more slip difference between radiographs. For the purpose of this analysis, patients with a slip of 7âmm or more on upright neutral radiographs were assumed to require a fusion. RESULTS: A total of 191 patients were identified. Mean age was 61.6 years (114 females, 60%). Only 31 patients (16%) had additional motion on flexion-extension views not seen on upright neutral x-rays versus supine MRI. Of these 31 patients, 19 had slips less than 7âmm on upright x-ray, generating equipoise for fusion. CONCLUSION: Flexion-extension radiographs may play a limited role in management of degenerative spondylolisthesis. The subset of patients for which flexion-extension views were most likely to provide value were patients with smaller slips (<7âmm) with no evidence of motion on standing radiographs versus MRI. In 90% of spondylolisthesis cases, information used for surgical planning may be ascertained by comparing motion between supine MRI and upright lateral radiographs.Level of Evidence: 3.
Subject(s)
Lumbar Vertebrae/diagnostic imaging , Magnetic Resonance Imaging/methods , Range of Motion, Articular/physiology , Spondylolisthesis/diagnostic imaging , Adult , Aged , Female , Humans , Lumbar Vertebrae/surgery , Male , Middle Aged , Radiography/methods , Retrospective Studies , Spondylolisthesis/surgeryABSTRACT
OBJECTIVE: Unexpected nonhome discharge causes additional costs in the current reimbursement models, especially to the payor. Nonhome discharge is also related to longer length of hospital stay and therefore higher healthcare costs to society. With increasing demand for spine surgery, it is important to minimize costs by streamlining discharges and reducing length of hospital stay. Identifying factors associated with nonhome discharge can be useful for early intervention for discharge planning. The authors aimed to identify the drivers of nonhome discharge in patients undergoing 1- or 2-level instrumented lumbar fusion. METHODS: The electronic medical records from a single-center hospital administrative database were analyzed for consecutive patients who underwent 1- to 2-level instrumented lumbar fusion for degenerative lumbar conditions during the period from 2016 to 2018. Discharge disposition was determined as home or nonhome. A logistic regression analysis was used to determine associations between nonhome discharge and age, sex, body mass index (BMI), race, American Society of Anesthesiologists grade, smoking status, marital status, insurance type, residence in an underserved zip code, and operative factors. RESULTS: A total of 1502 patients were included. The majority (81%) were discharged home. Factors associated with a nonhome discharge were older age, higher BMI, living in an underserved zip code, not being married, being on government insurance, and having more levels fused. Patients discharged to a nonhome facility had longer lengths of hospital stay (5.6 vs 3.0 days, p < 0.001) and significantly increased hospital costs ($21,204 vs $17,518, p < 0.001). CONCLUSIONS: Increased age, greater BMI, residence in an underserved zip code, not being married, and government insurance are drivers for discharge to a nonhome facility after a 1- to 2-level instrumented lumbar fusion. Early identification and intervention for these patients, even before admission, may decrease the length of hospital stay and medical costs.
ABSTRACT
OBJECTIVE: Medical comorbidities, particularly preoperatively diagnosed anxiety, depression, and obesity, may influence how patients perceive and measure clinical benefit after a surgical intervention. The current study was performed to define and compare the minimum clinically important difference (MCID) thresholds in patients with and without preoperative diagnoses of anxiety or depression and obesity who underwent spinal fusion for grade 1 degenerative spondylolisthesis. METHODS: The Quality Outcomes Database (QOD) was queried for patients who underwent lumbar fusion for grade 1 degenerative spondylolisthesis during the period from January 2014 to August 2017. Collected patient-reported outcomes (PROs) included the Oswestry Disability Index (ODI), health status (EQ-5D), and numeric rating scale (NRS) scores for back pain (NRS-BP) and leg pain (NRS-LP). Both anchor-based and distribution-based methods for MCID calculation were employed. RESULTS: Of 462 patients included in the prospective registry who underwent a decompression and fusion procedure, 356 patients (77.1%) had complete baseline and 12-month PRO data and were included in the study. The MCID values for ODI scores did not significantly differ in patients with and those without a preoperative diagnosis of obesity (20.58 and 20.69, respectively). In addition, the MCID values for ODI scores did not differ in patients with and without a preoperative diagnosis of anxiety or depression (24.72 and 22.56, respectively). Similarly, the threshold MCID values for NRS-BP, NRS-LP, and EQ-5D scores were not statistically different between all groups. Based on both anchor-based and distribution-based methods for determination of MCID thresholds, there were no statistically significant differences between all cohorts. CONCLUSIONS: MCID thresholds were similar for ODI, EQ-5D, NRS-BP, and NRS-LP in patients with and without preoperative diagnoses of anxiety or depression and obesity undergoing spinal fusion for grade 1 degenerative spondylolisthesis. Preoperative clinical and shared decision-making may be improved by understanding that preoperative medical comorbidities may not affect the way patients experience and assess important clinical changes postoperatively.
ABSTRACT
Although primary tumors of the spine and neural elements are rare, metastatic disease to the spine is quite common. Traditionally, surgical treatment for spinal tumor patients involves open decompression with or without stabilization. The single-position minimally invasive (MIS) lateral approach, which has been recently described over the recent decade, allows simultaneous access to the anterior and posterior columns with the patient positioned in the lateral decubitus position. Herein, we review the application of single-position MIS lateral surgery for the treatment of spinal neoplasm. The aim was to review the evolution, operative technique, outcomes, and complications associated with MIS lateral approaches for spinal tumors. The history of spinal tumor diagnosis and management are reviewed and discussed as well as the author's experience and literature regarding spinal tumor treatment outcome and surgical complications, with particular attention to single-position, MIS lateral approaches. In addition, the author's surgical technique is outlined in detail for thoracic, thoracolumbar and lumbar tumors. Furthermore, there are specific indications and complications associated with the surgical treatment of spinal tumors, and the MIS, single-position lateral approach, when applied appropriately, allows for concurrent access to the anterior and posterior column while mitigating the complications associated with traditional, open posterior-based approaches. In the treatment of spinal neoplasms, the goals of surgery are dictated by a number of tumor-specific and patient-specific factors. Therefore, operative treatment of tumors in the future may be a consolidation of historical surgical techniques and MIS, single-position lateral approaches. Regardless, multidisciplinary management is imperative for the individualized treatment of the patient and optimization of outcome.
ABSTRACT
STUDY DESIGN: Literature review. OBJECTIVES: Posterior cervical interfacet cages are an alternative to lateral mass fixation in patients undergoing cervical spine surgery. Recently, a percutaneous, tissue-sparing system for interfacet cage placement has been developed, however, there is limited clinical evidence supporting its widespread use. The aim was to review studies published on this system for patient reported outcomes, radiographic outcomes, intraoperative outcomes, and complications. METHODS: Four electronic databases (PubMed, EMBASE, Scopus, and MEDLINE) were queried for original published studies that evaluated the percutaneous, tissue-sparing technique for posterior cervical fusion with interfacet cage placement. All studies reporting on open techniques and purely biomechanical studies were excluded. RESULTS: The extensive literature search returned 7852 studies. After systematic review, a total of 7 studies met inclusion criteria. Studies were independently classified as retrospective or prospective cohort studies and each assessed by the GRADE criteria. Patient reported outcomes, radiographic outcomes, intraoperative outcomes, and complications were extracted from each study and presented. CONCLUSIONS: Tissue-sparing, posterior cervical fusion with interfacet cages may be considered a safe and effective surgical intervention in patients failing conservative management for cervical spondylotic disease. However, the quality of evidence in the literature is lacking, and controlled, comparative studies are needed for definitive assessment.
ABSTRACT
BACKGROUND: The utilization of the S2 Alar-Iliac (S2AI) screw provides an optimal method of spinopelvic fixation. The free-hand placement of these screws obviates the use of intra-operative fluoroscopy and relies heavily on sacropelvic anatomy; variations of this anatomy could alter the ideal screw trajectory. The S2AI corridor is near several neurovascular structures, thus an accurate trajectory is critical. The reported angles of trajectory vary within the literature and a paucity of data exists on how patient morphometry influences ideal screw trajectory. We sought to examine the relationship between ideal screw trajectory and pelvic parameters. METHODS: The records of 99 consecutive patients with degenerative thoracolumbar pathology were reviewed and pelvic parameters including sacral slope, pelvic tilt, and pelvic incidence were measured with preoperative standing radiographs. Using 3-dimensional computed tomography (CT) reconstructions, an ideal S2AI trajectory was defined and anteroposterior (horizontal) and cephalocaudal (sagittal) angles were recorded. RESULTS: Pelvic tilt was found to have a moderate inverse correlation with cephalocaudal screw trajectory (r=-0.467, p-value=0.006). Pelvic incidence and sacral slope had weaker correlations with cephalocaudal screw angle. In subgroup analysis, patients with high pelvic tilt (>20°) had a significantly lower cephalocaudal screw trajectory (24.9 ± 3.7° versus 29.8 ± 2.8°, p-value=<0.001) compared to those with a normal pelvic tilt (≤20°). CONCLUSIONS: This study found an inverse relationship between pelvic tilt and cephalocaudal S2AI screw trajectory. Therefore, the sagittal angle of insertion becomes increasingly more perpendicular to the floor (less caudally orientated) as pelvic tilt increases in reference to a patient positioned prone on an operating table parallel to the floor. This may bolster safety and efficacy when utilizing the free-hand technique for placement of the S2AI screw as it allows the surgeon to plan a more ideal trajectory by accounting for pelvic parameters.
ABSTRACT
BACKGROUND: The opioid epidemic is at epic proportions currently in the United States. Exposure to opioids for surgery and subsequent postoperative pain management is a known risk factor for opioid dependence. In addition, opioids can have a negative impact on multiple aspects including clinical outcomes, length of hospital stay, and overall cost of care. Thus, the greatest effort to reduce perioperative opioid use is necessary and a multimodal pain control (MMPC) has been gaining popularity. However, its efficacy in spine surgery is not well known. We aimed to evaluate the efficacy of a MMPC protocol in patients undergoing lumbar single-level anterior lumbar interbody fusion (ALIF). METHODS: This is a retrospective comparative study. From a prospective, single-surgeon, surgical database, consecutive patients undergoing single-level ALIF with or without subsequent posterior fusion for degenerative lumbar conditions were identified before and after initiation of the MMPC protocol. The MMPC protocol consisted of a preoperative oral regimen of cyclobenzaprine (10 mg), gabapentin (600 mg), acetaminophen (1 g), and methadone (10 mg). Postoperatively they received a bilateral transverse abdominis plane block with 0.5% Ropivacaine prior to extubation. We compared in-hospital opioid consumption between the MMPC and non-MMPC cohorts as well as baseline demographic, the length of hospital stay, cost, and rate of postoperative ileus. Opioid consumption was calculated and normalized to the morphine milligram equivalents (MMEs). RESULTS: In total, 68 patients in the MMPC cohort and 39 in the non-MMPC cohort were identified. There was no difference in baseline demographics including sex, body mass index, smoking status, or preoperative opioid use between the two groups. Although there was no difference in the MMEs on the day of surgery (58.5 vs. 66.9, P=0.387), cumulative MMEs each day after surgery was significantly lower in the MMPC cohort, with final cumulative MMEs being reduced by 62% (120.2 vs. 314.8, P<0.001). There was no difference in postoperative ileus, length of stay, and hospital costs. CONCLUSIONS: The use of a MMPC protocol in patients undergoing single-level ALIF for degenerative conditions reduced opioid consumption starting on the first day after surgery, resulting in a cumulative reduction of 62%.
ABSTRACT
A survey was administered to a random sampling of the American Academy of Orthopaedic Surgeons (AAOS) members to determine the rate at which recently trained orthopedic surgeons switch their first job and to identify factors affecting the job selection process. There were 351 (21%) respondents. Respondents considered practice location (41%), practice type (28%), and family proximity (23%) as most important while research opportunity (54%) and signing bonus (33%) were considered least important in their first job. Half of the respondents (51%) left their first job before the completion of their fifth year; most left for financial reasons (34%) or because the practice was not as advertised (31%). Many (53%) stated they had minimal training in selecting their first job and most (88%) felt inadequately prepared for the business side of orthopedics. Further studies are needed to evaluate the high rate of initial post-training job attrition to decrease the personal and societal costs of this phenomenon.
ABSTRACT
STUDY DESIGN: Retrospective database study. OBJECTIVE: To analyze the economic and age data concerning primary and revision posterolateral fusion (PLF) and posterior/transforaminal lumbar interbody fusion (PLIF/TLIF) throughout the United States to improve value-based care and health care utilization. METHODS: The National Inpatient Sample (NIS) database was queried by the International Classification of Diseases, Ninth Revision, Clinical Modification codes for patients who underwent primary or revision PLF and PLIF/TLIF between 2011 and 2014. Age and economic data included number of procedures, costs, and revision burden. The National Inpatient Sample database represents a 20% sample of discharges from US hospitals weighted to provide national estimates. RESULTS: From 2011 to 2014, the annual number of PLF and PLIF/TLIF procedures decreased 18% and increased 23%, respectively, in the Unites States. During the same period, the number of revision PLF decreased 19%, while revision PLIF/TLIF remained relatively unchanged. The average cost of PLF was lower than the average cost of PLIF/TLIF. The aggregate national cost for PLF was more than $3 billion, while PLIF/TLIF totaled less than $2 billion. Revision burden (ratio of revision surgeries to the sum of both revision and primary surgeries) remained constant at 8.0% for PLF while it declined from 3.2% to 2.9% for PLIF/TLIF. CONCLUSION: This study demonstrated a steady increase in PLIF/TLIF, while PLF alone decreased. The increasing number of PLIF/TLIF procedures may account for the apparent decline of PLF procedures. There was a higher average cost for PLIF/TLIF as compared with PLF. Revision burden remained unchanged for PLF but declined for PLIF/TLIF, implying a decreased need for revision procedures following the initial PLIF/TLIF surgery.
ABSTRACT
Objective To define the critical elements of common procedures in arthroscopic surgery. Methods A survey was administered to surgeons associated with the American Orthopaedic Society for Sports Medicine (AOSSM) to determine the critical elements for four common arthroscopic procedures: anterior cruciate ligament (ACL) reconstruction, knee arthroscopy with meniscal debridement or repair, rotator cuff repair (RCR), and capsulorrhaphy for anterior glenohumeral instability (Bankart repair). Respondents were asked which steps necessitated their direct supervision. The level of experience and practice demographics were also recorded. Results For all applicable procedures, patient positioning and closure were not considered critical steps. Establishing arthroscopic portals was critical for all procedures, except knee arthroscopy. Diagnostic arthroscopy was only critical in ACL reconstruction. Private practice surgeons considered every step of these common procedures to be critical elements. Less experienced surgeons were more likely to regard certain aspects of a procedure critical. Surgeons with >15 years of experience considered diagnostic arthroscopy critical to all procedures, whereas those with <15 years of experience did not. Unlike surgeons with a resident as first assist, surgeons with a physician assistant (PA) or nurse practitioner (NP) found every step of each procedure to be critical except closure and positioning. Conclusion Across all procedures, only patient positioning and closure were consistently regarded as non-critical elements. There were significant differences in responses according to experience and practice setting. Future research is necessary to determine the implications of these findings and guide the definition of the "critical portions" of surgery.
ABSTRACT
BACKGROUND: Objective of this study is to evaluate demographics, risk factors, and incidence of instrumentation related complications (IRC) in spinal surgeries from 2009-2012. The Scoliosis Research Society (SRS) morbidity and mortality (M&M) database has tremendous value in orthopaedic surgery. SRS gathers surgeon-reported complications, including instrumentation failure, visual complications, neurological deficits, infections, and death. Limited literature exists on the incidence of perioperative instrumentation complications in deformity surgery. We utilized the SRS database to evaluate demographics, risk factors, and incidence of IRC in spinal surgeries from 2009-2012. METHODS: The SRS M&M database was queried for IRC in patients undergoing surgery for scoliosis, spondylolisthesis, and kyphosis from 2009-2012. Demographics, comorbidities, diagnoses, curve magnitude, and intraoperative characteristics were analyzed. Intraoperative characteristics included surgical approach, performance of fusion or osteotomy, operative times, blood loss, instrumentation used, and documented instrumentation complication. RESULTS: A total of 167,972 patients were identified, including 311 IRC. The overall IRC rate was 0.19% (18.5 per 10,000 patients), which decreased significantly from 2009-2012 (0.37% vs. 0.19%, P<0.001). The mean age of patients with IRC was 38.5±25.5 years. Most common comorbidities included hypertension (23.5%), pulmonary disease (13.5%), diabetes (10.6%), smoking (8.7%), and vascular disease (7.1%). IRC occurred in 206 (66.2%) patients with scoliosis, 58 (18.6%) with spondylolisthesis, and 45 (14.5%) with kyphosis. Compared to patients with spondylolisthesis, patients with kyphosis (0.27% vs. 0.11%, P<0.001) and scoliosis (0.21% vs. 0.11%, P<0.001), experienced significantly more IRC. IRC included implant failure (23.3%), migration (28.3%), and malpositioned implants (48.6%). New perioperative neurologic deficits were reported in 146 (46.9%) patients, and 84 (27%) of these implants were removed. CONCLUSIONS: IRC occur in approximately 18.5 per 10,000 deformity patients, with a rate significantly higher in patients with kyphosis. The potentially avoidable occurrence of implant malpositioning represents nearly 50% of these complications. Closer attention to posterior bony anatomy, improved intraoperative imaging with utilization of navigation or robotic guidance may decrease these complications.
ABSTRACT
Image guidance (IG) and robotics systems are becoming more widespread in their utilization and can be invaluable intraoperative adjuncts during spine surgery. Both are highly reliant upon stereotaxy and either pre- or intraoperative radiographic imaging. While user-operated IG systems have been commercially available longer and subsequently are more widely utilized across centers, robotics systems provide unique theoretical advantages over freehand and IG techniques for placing instrumentation within the spine. While there is a growing plethora of data showing that IG and robotic systems decrease the incidence of malpositioned screws, less is known about their impact on clinical outcomes. Both robotics and IG may be of particular value in cases of substantial deformity or complex anatomy. Indications for the use of these systems continue to expand with an increasing body of literature justifying their use in not only guiding thoracolumbar pedicle screw placement, but also in cases of cervical and pelvic instrumentation as well as spinal tumor resection. Both techniques also offer the potential benefit of reducing occupational exposures to ionizing radiation for the operating room staff, the surgeon, and the patient. As the use of IG and robotics in spine surgery continues to expand, these systems' value in improving surgical accuracy and clinical outcomes must be weighed against concerns over cost and workflow. As newer systems incorporating both real-time IG and robotics become more utilized, further research is necessary to better elucidate situations where these systems may be particularly beneficial in spine surgery.
Subject(s)
Neurosurgical Procedures , Robotic Surgical Procedures , Spine/surgery , Surgery, Computer-Assisted , Humans , Imaging, Three-Dimensional , Pedicle ScrewsABSTRACT
BACKGROUND: Tethered drains are a complication of drain usage and may result in unintentional retained broken drains, as well as anxiety and uncertainty for the surgeon and the patient. To date, no study has examined the optimal approach for management and removal of tethered drains. METHODS: The study design sought to identify suture size, mechanism of drain fixation (through versus around), points of constriction (one versus multiple) and the efficacy of weighted traction as potential sources of tethered drains by means of four study arms. (1) Arm one compared drains sutured through the tubing versus a tight closure of the surrounding fascia, which were then subjected to weighted suspension. (2) Arm two compared drains sutured into the fascia using eight each of 4-0, 2-0 and 0 vicryl and then subject to manual traction. (3) Arm three compared drains sutured to the fascia through the tubing versus local tissue incarceration followed by manual traction. (4) Lastly, group four examined drains tethered at two distinct points after which they were subject to manual traction. RESULTS: Our results showed a 25% drain retention rate when manual traction was applied to 0 vicryl and 2-0 vicryl suture. In contrast, there were no instances of drain retention when suture was closed with 4-0 vicryl. When evaluating for multiple points of fixation, drains tethered in two locations were retained in 87.5% of trials versus drains with a single tether point (25%) representing a statistical significance (P = 0.041). There was no difference in rates of drain retention when pierced through the tubing versus incarcerated in local fascia. Only one of the 16 drains was successfully removed by weighted suspension (8.3%). Attempts at manual traction following weighted suspension resulted in a 50% drain retention rate which was higher than the rates of immediate manual traction (18.8%). CONCLUSION: Our results found that manual traction is a reasonable first line approach to address drains tethered by all methods and suture sizes. The use of weighted traction for the management of tethered drains is less effective than manual traction and may result in more retained drain fragments. LEVEL OF EVIDENCE: Level IV.
Subject(s)
Cadaver , Device Removal , Drainage/adverse effects , Drainage/methods , Suture Techniques , Sutures , Aged , Anxiety , Drainage/instrumentation , Drainage/psychology , Humans , Male , Patients/psychology , Surgeons/psychology , Treatment FailureABSTRACT
BACKGROUND: Cortical bone trajectory (CBT) screws have been recently described as a method of lumbosacral fixation. These screws are typically inserted under fluoroscopic guidance with a medial-to-lateral trajectory in the axial plane and a caudal-to-cephalad trajectory in the sagittal plane. In an effort to reduce surgeon radiation exposure and improve accuracy, CBT screws may be inserted under navigation with intraoperative cone beam computed tomography (CT). However, the accuracy of CBT screw placement under intraoperative navigation has yet to be assessed in the literature. The purpose of the study was to evaluate the accuracy of CBT screw placement using intraoperative cone beam CT navigation. METHODS: One hundred and thirty-four consecutive patients who underwent CBT fixation with 618 screws under intraoperative navigation were analyzed from May 2016 through May 2018. Screws were placed by one of three senior spine surgeons using the Medtronic O-Arm Stealth Navigation. Screw position and accuracy were assessed on intraoperative and postoperative CT scans using 2D and 3D reconstructions with VitreaCore software. RESULTS: The majority of surgeries were primary cases (73.1%). The mean age at the time of surgery was 61.5±10.0 years and the majority of patients were female (61.2%). Most patients underwent surgery for a diagnosis of degenerative spondylolisthesis (47.8%) followed by mechanical collapse with foraminal stenosis (22.4%). Ten violations of the vertebral cortex were noted with an average breach distance of 1.0±0.7 mm. Three breaches were lateral (0.5%) and seven were medial (1.1%). The overall navigated screw accuracy rate was 98.3%. The accuracy to within 1 mm of error was 99.2%. There were no intra-operative neurologic, vascular, or visceral complications related to the placement of the CBT screws. CONCLUSIONS: CBT screw fixation under an intraoperative cone beam CT navigated insertion technique is safe and reliable. Despite five breaches greater than 1mm, there were no complications related to the placement of the CBT screws in this series.