The Silent Sway of Splicing by Synonymous Substitutions.

Alternative splicing diversifies mRNA transcripts in human cells. This sequence-driven process can be influenced greatly by mutations, even those that do not change the protein coding potential of the transcript. Synonymous mutations have been shown to alter gene expression through modulation of splicing, mRNA stability, and translation. Using a synonymous position mutation library in SMN1 exon 7, we show that 23% of synonymous mutations across the exon decrease exon inclusion, suggesting that nucleotide identity across the entire exon has been evolutionarily optimized to support a particular exon inclusion level. Although phylogenetic conservation scores are insufficient to identify synonymous positions important for exon inclusion, an alignment of organisms filtered based on similar exon/intron architecture is highly successful. Although many of the splicing neutral mutations are observed to occur, none of the exon inclusion reducing mutants was found in the filtered alignment. Using the modified phylogenetic comparison as an approach to evaluate the impact on pre-mRNA splicing suggests that up to 45% of synonymous SNPs are likely to alter pre-mRNA splicing. These results demonstrate that coding and pre-mRNA splicing pressures co-evolve and that a modified phylogenetic comparison based on the exon/intron architecture is a useful tool in identifying splice altering SNPs.

Sequence requirements for localization and packaging of Ty3 retroelement RNA.

Retroviruses and retrotransposons package genomic RNA into virus-like particles (VLPs) in a poorly understood process. Expression of the budding yeast retrotransposon Ty3 results in the formation of cytoplasmic Ty3 VLP assembly foci comprised of Ty3 RNA and proteins, and cellular factors associated with RNA processing body (PB) components, which modulate translation and effect nonsense-mediated decay (NMD). A series of Ty3 RNA variants were tested to understand the effects of read-through translation via programmed frameshifting on RNA localization and packaging into VLPs, and to identify the roles of coding and non-coding sequences in those processes. These experiments showed that a low level of read-through translation of the downstream open reading frame (as opposed to no translation or translation without frameshifting) is important for localization of full-length Ty3 RNA to foci. Ty3 RNA variants associated with PB components via independent determinants in the native Ty3 untranslated regions (UTRs) and in GAG3-POL3 sequences flanked by UTRs adapted from non-Ty3 transcripts. However, despite localization, RNAs containing GAG3-POL3 but lacking Ty3 UTRs were not packaged efficiently. Surprisingly, sequences within Ty3 UTRs, which bind the initiator tRNA(Met) proposed to provide the dimerization interface, were not required for packaging of full-length Ty3 RNA into VLPs. In summary, our results demonstrate that Gag3 is sufficient and required for localization and packaging of RNAs containing Ty3 UTRs and support a role for POL3 sequences, translation of which is attenuated by programmed frameshifting, in both localization and packaging of the Ty3 full-length gRNA.

Computationally Optimised DNA Assembly of synthetic genes.

Gene synthesis is hampered by two obstacles: improper assembly of oligonucleotides; oligonucleotide defects incurred during chemical synthesis. To overcome the first problem, we describe the employment of a Computationally Optimised DNA Assembly (CODA) algorithm that uses the degeneracy of the genetic code to design overlapping oligonucleotides with thermodynamic properties for self-assembly into a single, linear, DNA product. To address the second problem, we describe a hierarchical assembly strategy that reduces the incorporation of defective oligonucleotides into full-length gene constructs. The CODA algorithm and these biological methods enable fast, simple and reliable assemblies of sequence-correct full-length genes.

Ty3 nucleocapsid controls localization of particle assembly.

Expression of the budding yeast retrotransposon Ty3 results in production of viruslike particles (VLPs) and retrotransposition. The Ty3 major structural protein, Gag3, similar to retrovirus Gag, is processed into capsid, spacer, and nucleocapsid (NC) during VLP maturation. The 57-amino-acid Ty3 NC protein has 17 basic amino acids and contains one copy of the CX(2)CX(4)HX(4)C zinc-binding motif found in retrovirus NC proteins. Ty3 RNA, protein, and VLPs accumulate in clusters associated with RNA processing bodies (P bodies). This study investigated the role of the NC domain in Ty3-P body clustering and VLP assembly. Fifteen Ty3 NC Ala substitution and deletion mutants were examined using transposition, immunoblot, RNA protection, cDNA synthesis, and multimerization assays. Localization of Ty3 proteins and VLPs was characterized microscopically. Substitutions of each of the conserved residues of the zinc-binding motif resulted in the loss of Ty3 RNA packaging. Substitution of the first two of four conserved residues in this motif caused the loss of Ty3 RNA and protein clustering with P bodies and disrupted particle formation. NC was shown to be a mediator of formation of Ty3 RNA foci and association of Ty3 RNA and protein with P bodies. Mutations that disrupted these NC functions resulted in various degrees of Gag3 nuclear localization and a spectrum of different particle states. Our findings are consistent with the model that Ty3 assembly is associated with P-body components. We hypothesize that the NC domain acts as a molecular switch to control Gag3 conformational states that affect both assembly and localization.

TY3 GAG3 protein forms ordered particles in Escherichia coli.

The yeast retrovirus-like element Ty3 GAG3 gene encodes a Gag3 polyprotein analogous to retroviral Gag. Gag3 lacks matrix, but contains capsid, spacer, and nucleocapsid domains. Expression of a Ty3 Gag3 or capsid domain optimized for expression in Escherichia coli was sufficient for Ty3 particle assembly. Virus-like ordered particles assembled from Gag3 were similar in size to immature particles from yeast and contained nucleic acid. However, particles assembled from the CA domain were variable in size and displayed much less organization than native particles. These results indicate that assembly can be driven through interactions among capsid subunits in the particle, but that the nucleocapsid domain, likely in association with RNA, confers order upon this process.

Ty3 capsid mutations reveal early and late functions of the amino-terminal domain.

The Ty3 retrotransposon assembles into 50-nm virus-like particles that occur in large intracellular clusters in the case of wild-type (wt) Ty3. Within these particles, maturation of the Gag3 and Gag3-Pol3 polyproteins by Ty3 protease produces the structural proteins capsid (CA), spacer, and nucleocapsid. Secondary and tertiary structure predictions showed that, like retroviral CA, Ty3 CA contains a large amount of helical structure arranged in amino-terminal and carboxyl-terminal bundles. Twenty-six mutants in which alanines were substituted for native residues were used to study CA subdomain functions. Transposition was measured, and particle morphogenesis and localization were characterized by analysis of protein processing, cDNA production, genomic RNA protection, and sedimentation and by fluorescence and electron microscopy. These measures defined five groups of mutants. Proteins from each group could be sedimented in a large complex. Mutations in the amino-terminal domain reduced the formation of fluorescent Ty3 protein foci. In at least one major homology region mutant, Ty3 protein concentrated in foci but no wt clusters of particles were observed. One mutation in the carboxyl-terminal domain shifted assembly from spherical particles to long filaments. Two mutants formed foci separate from P bodies, the proposed sites of assembly, and formed defective particles. P-body association was therefore found to be not necessary for assembly but correlated with the production of functional particles. One mutation in the amino terminus blocked transposition after cDNA synthesis. Our data suggest that Ty3 proteins are concentrated first, assembly associated with P bodies occurs, and particle morphogenesis concludes with a post-reverse transcription, CA-dependent step. Particle formation was generally resistant to localized substitutions, possibly indicating that multiple domains are involved.

GRA1 protein vaccine confers better immune response compared to codon-optimized GRA1 DNA vaccine.

The present study evaluates immunogenicity and protection potency of a codon-optimized GRA1 DNA vaccine, wild type GRA1 DNA vaccine and an adjuvanted recombinant GRA1 protein vaccine candidate in BALB/c mice against lethal toxoplasmosis. Of the three GRA1 vaccines tested, the recombinant GRA1 protein vaccine results reveal significant increase in immune response and prolonged survival against acute toxoplasmosis compared to DNA vaccinations. Immune response and protection conferred by codon-optimized GRA1 DNA vaccine was slightly better than wild type GRA1 DNA vaccine.

HB tag modules for PCR-based gene tagging and tandem affinity purification in Saccharomyces cerevisiae.

We have recently developed the HB tag as a useful tool for tandem-affinity purification under native as well as fully denaturing conditions. The HB tag and its derivatives consist of a hexahistidine tag and a bacterially-derived in vivo biotinylation signal peptide, which support sequential purification by Ni2+ -chelate chromatography and binding to immobilized streptavidin. To facilitate tagging of budding yeast proteins with HB tags, we have created a series of plasmids with various selectable markers. These plasmids allow single-step PCR-based tagging and expression under control of the endogenous promoters or the inducible GAL1 promoter. HB tagging of several budding yeast ORFs demonstrated efficient biotinylation of the HB tag in vivo by endogenous yeast biotin ligases. No adverse effects of the HB tag on protein function were observed. The HB tagging plasmids presented here are related to previously reported epitope-tagging plasmids, allowing PCR-based tagging with the same locus-specific primer sets that are used for other widely used epitope-tagging strategies. The Sequences for the described plasmids were submitted to GenBank under Accession Numbers DQ407918-pFA6a-HBH-kanMX6 DQ407927-pFA6a-RGS18H-kanMX6 DQ407919-pFA6a-HBH-hphMX4 DQ407928-pFA6a-RGS18H-hphMX4 DQ407920-pFA6a-HBH-TRP1 DQ407929-pFA6a-RGS18H-TRP1 DQ407921-pFA6a-HTB-kanMX6 DQ407930-pFA6a-kanMX6-PGAL1-HBH DQ407922-pFA6a-HTB-hphMX4 DQ407931-pFA6a-TRP1-PGAL1-HBH DQ407923-pFA6a-HTB-TRP1 DQ407924-pFA6a-BIO-kanMX6 DQ407925-pFA6a-BIO-hphMX4 DQ407926-pFA6a-BIO-TRP1.