ABSTRACT
We show that in spatially resolved reflectance anisotropy (RA) spectrometers, off-axis optical rays introduce a spurious signal component that cannot be addressed by optical alignment. Such a component is associated with the difference between the reflectivities s and p of the sample and depends, in a complex manner, on the incidence position of the incident light on the surface of the sample. We report a data-reduction procedure to easily identify and remove spurious RA signals associated with the off-axis optical rays, based on the singular value decomposition analysis of spatially resolved RA spectra. We validated this approach by developing a spatially resolved RA spectrometer based on an 8 × 8 multi-anode photomultiplier (PMT). The PMT allowed the use of phase-sensitive detection techniques to enhance the signal-to-noise ratio, which is essential for the evaluation of the proposed data reduction procedure.
ABSTRACT
This corrects the article DOI: 10.1038/srep42429.
ABSTRACT
Silicon (Si) based complementary metal-oxide semiconductor (CMOS) technology has been the driving force of the information-technology revolution. However, scaling of CMOS technology as per Moore's law has reached a serious bottleneck. Among the emerging technologies memristive devices can be promising for both memory as well as computing applications. Hybrid CMOS/memristor circuits with CMOL (CMOS + "Molecular") architecture have been proposed to combine the extremely high density of the memristive devices with the robustness of CMOS technology, leading to terabit-scale memory and extremely efficient computing paradigm. In this work, we demonstrate a hybrid 3D CMOL circuit with 2 layers of memristive crossbars monolithically integrated on a pre-fabricated CMOS substrate. The integrated crossbars can be fully operated through the underlying CMOS circuitry. The memristive devices in both layers exhibit analog switching behavior with controlled tunability and stable multi-level operation. We perform dot-product operations with the 2D and 3D memristive crossbars to demonstrate the applicability of such 3D CMOL hybrid circuits as a multiply-add engine. To the best of our knowledge this is the first demonstration of a functional 3D CMOL hybrid circuit.
ABSTRACT
We report on a rapid, 32-channel reflectance-difference (RD) spectrometer with sub-second spectra acquisition times and ΔR/R sensitivity in the upper 10(-4) range. The spectrometer is based on a 50 kHz photo-elastic modulator for light polarization modulation and on a lock-in amplifier for signal harmonic analysis. Multichannel operation is allowed by multiplexing the 32 outputs of the spectrometer into the input of the lock-in amplifier. The spectrometer spans a wavelength range of 230 nm that can be tuned to cover E(1) and E(1) + Δ(1) transitions for a number of III-V semiconductors at epitaxial growth temperatures, including GaAs, InAs, AlAs, and their alloys. We present two examples of real-time measurements to demonstrate the performance of the RD spectrometer, namely, the evolution of the RD spectrum of GaAs (001) annealed at 500 °C and the time-dependent RD spectrum during the first stages of the epitaxial growth of In(0.3)Ga(0.7)As on GaAs (001) substrates.