Poly-ϵ-caprolactone scaffold as staple-line reinforcement of rectal anastomosis: an experimental piglet study.

PURPOSE: Rectal anastomoses have a persisting high incidence of anastomotic leakage. This study aimed to assess whether the use of a poly-ϵ-caprolactone (PCL) scaffold as reinforcement of a circular stapled rectal anastomosis could increase tensile strength and improve healing compared to a control in a piglet model. METHOD: Twenty weaned female piglets received a stapled rectal anastomosis and were randomised to either reinforcement with PCL scaffold (intervention) or no reinforcement (control). On postoperative day five the anastomosis was subjected to a tensile strength test followed by a histological examination to evaluate the wound healing according to the Verhofstad scoring. RESULTS: The tensile strength test showed no significant difference between the two groups, but histological evaluation revealed significant impaired wound healing in the intervention group. CONCLUSION: The incorporation of a PCL scaffold into a circular stapled rectal anastomosis did not increase anastomotic tensile strength in piglets and indicated an impaired histologically assessed wound healing.

Comparison of the effect of argon, hydrogen, and nitrogen gases on the reduced graphene oxide-hydroxyapatite nanocomposites characteristics.

In this study, the effect of the argon, nitrogen, and hydrogen gases on the final properties of the reduced graphene oxide- hydroxyapatite nanocomposites synthesized by gas injected hydrothermal method was investigated. Four samples were synthesized, which in the first sample the pressure was controlled by volume change at a constant concentration. In subsequent samples, the pressure inside the autoclave was adjusted by the injecting gases. The initial pressure of the injected gases was 10 bar and the final pressure considered was 25 bar. The synthesized powders were consolidated at 950 °C and 2 MPa by spark plasma sintering method. The final samples were subjected to Vickers indentation analysis. The findings of this study indicate that the injection of argon, hydrogen, and nitrogen gases improved the mechanical properties of the nanocomposites. Injection of gases increased the crystallinity and particle size of hydroxyapatite, and this increase was greater for nitrogen gas than for others. Injection of these gases increased the rate of graphene oxide reduction and in this case the effect of nitrogen gas was greater than the others.

Improving the mechanical behavior of reduced graphene oxide/hydroxyapatite nanocomposites using gas injection into powders synthesis autoclave.

In this study, we show the synthesis of reduced graphene oxide/hydroxyapatite (rGO/HA) composites using a hydrothermal autoclave with argon-15% hydrogen gas injection. This both increases the hydrothermal pressure and uses hydrogen as a reductive agent in the process. The synthesized powders were then consolidated with spark plasma sintering method. The analysis of the consolidated samples included Vickers Indentation technique and cell viability. The results showed that injected gases in the autoclave produced powders with a higher crystallinity compared to synthesis without the gases. Also, hydrogen gas led to increased reduction of GO. The microscopic analysis confirmed existing graphene sheets with folding and wrinkling in the powders and indicated that various preferential directions played a role in the growth of hydroxyapatite crystals. The results showed that in general, graphene sheets increased the mechanical properties of HA. In the samples synthesized with injected gases, this increase was more significant. Interface analysis results indicate that reduced graphene oxide (rGO)/HA interface is likely coherent. These nanocomposites were biocompatible and showed some hydrophobicity compared to pure HA.

Biomechanical evaluation of annulus fibrosus repair with scaffold and soft anchors in an ex vivo porcine model.

INTRODUCTION: Altered biomechanical properties, due to intervertebral disc (IVD) degeneration and missing nucleus fibrosus, could be thought as one of the reasons for the back pain many herniation patients experience after surgery. It has been suggested to repair annulus fibrosus (AF) to restore stability and allow nucleus pulposus (NP) replacement and furthermore prevent reherniation. The aim of this study was to evaluate a new method for closing a defect in AF for use in herniation surgery. METHODS: Our repair method combines a polycaprolactone (PCL) scaffold plugging herniation and soft anchors to secure the plug. Ex vivo biomechanical testing was carried out in nine porcine lumbar motion segments. Flexion-extension, lateral bending and rotation were repeated three times: first in healthy specimens, second with a full thickness circular defect applied, and third time with the specimens repaired. Finally push out tests were performed to check whether the plug would remain in. RESULTS: Tests showed that applying a defect to the AF increases the range of motion (ROM), neutral zone (NZ) and neutral zone stiffness (NZS). In flexion/extension it was found significant for ROM, NZ, and NZS. For lateral bending and rotation a significant increase in ROM occurred. After AF repair ROM, NZ and NZS were normalized. All plugs remained in the AF during push out test up until 4000 N, but NP was squeezed out through the pores of the scaffold. DISCUSSION: A defect in the AF changes the biomechanical properties in the motion segment, changes that point to instability. Repairing the defect with a PCL plug and soft anchors brought the biomechanical behavior back to native state. This concept is promising and might be a viable way to repair the IVD after surgery.

Dental pulp-derived stromal cells exhibit a higher osteogenic potency than bone marrow-derived stromal cells in vitro and in a porcine critical-size bone defect model.

INTRODUCTION: The osteogenic differentiation of bone marrow-derived mesenchymal stromal cells (BMSCs) was compared with that of dental pulp-derived stromal cells (DPSCs) in vitro and in a pig calvaria critical-size bone defect model. METHODS: BMSCs and DPSCs were extracted from the tibia bone marrow and the molar teeth of each pig, respectively. BMSCs and DPSCs were cultured in monolayer and on a three-dimensional (3D) polycaprolactone (PCL) - hyaluronic acid - tricalcium phosphate (HT-PCL) scaffold. Population doubling (PD), alkaline phosphatase (ALP) activity, and calcium deposition were measured in monolayer. In the 3D culture ALP activity, DNA content, and calcium deposition were evaluated. Six non-penetrating critical-size defects were made in each calvarium of 14 pigs. Three paired sub-studies were conducted: (1) empty defects vs. HT-PCL scaffolds; (2) PCL scaffolds vs. HT-PCL scaffolds; and (3) autologous BMSCs on HT-PCL scaffolds vs. autologous DPSCs on HT-PCL scaffolds. The observation time was five weeks. Bone volume fractions (BV/TV) were assessed with micro-computed tomography (µCT) and histomorphometry. RESULTS AND DISCUSSION: The results from the in vitro study revealed a higher ALP activity and calcium deposition of the DPSC cultures compared with BMSC cultures. Significantly more bone was present in the HT-PCL group than in both the pure PCL scaffold group and the empty defect group in vivo. DPSCs generated more bone than BMSCs when seeded on HT-PCL. In conclusion, DPSCs exhibited a higher osteogenic potential compared with BMSCs both in vitro and in vivo, making it a potential cell source for future bone tissue engineering.

Topography-Guided Proliferation: Distinct Surface Microtopography Increases Proliferation of Chondrocytes In Vitro.

Chondrocyte-based cartilage repair techniques require control of articular chondrocyte expansion ex vivo. Articular chondrocytes have limited availability, and prolonged culturing to obtain a cell number sufficient for clinical use often results in phenotypic alterations and increased costs. In this study, we applied a screening library consisting of micrometer-sized topographical features, termed biosurface structure array (BSSA), to identify specific topographical microstructures affecting the proliferation of human chondrocytes in passage 1 (P1) or 2 (P2). The BSSA library comprised 10 patterns and 16 combinations of pillar size (X) and interpillar gap size (Y). Specific microstructures significantly increased the chondrocytes' proliferative responsiveness in term of patterns, X and Y for P2 compared with P1. The P1 and P2 chondrocytes responded independently to similar patterns after 4 days of culturing, whereas only chondrocytes at P2 responded to specific microstructures with Y = 1 µm and X = 2, 4 µm by a 2.3- and 4.4-fold increased proliferation, respectively. In conclusion, these findings indicate that specific surface topographies promote chondrocyte proliferation and may, indeed, be a tool to control the behavior of chondrocytes in vitro.

Enhanced efficacy of chemotherapy for breast cancer stem cells by simultaneous suppression of multidrug resistance and antiapoptotic cellular defense.

While chemotherapy is universally recognized as a frontline treatment strategy for breast cancer, it is not always successful; among the leading causes of treatment failure is existing and/or acquired multidrug resistance. Cancer stem cells (CSCs), which constitute a minority of the cells of a tumor, are acknowledged to be responsible for increased resistance to chemo-drugs through a combination of increased expression of ATP-binding cassette transporters (ABC transporters), an increased anti-apoptotic defense, and/or the ability for extensive DNA repair like normal stem cells. Consequently, more effective therapy, especially targeted to CSCs, is urgently required. We studied the characteristics of 231-CSCs (CD44+/CD24-) sorted from human MDA-MB-231 breast cancer cells and demonstrated that 231-CSCs exhibited enhanced capacities for proliferation, migration, tumorigenesis and chemotherapy resistance. To address these multifunctional facets of CSCs, we devised a non-ionic surfactant-based vesicle (niosome) co-delivery system to simultaneously deliver siRNAs, targeted to both the ABC transporter (ABCG2) and the anti-apoptosis defense gene (BCL2), and doxorubicin (DOX) to CSCs. The rationale is to sensitize CSCs to DOX by down regulating the drug-resistance gene ABCG2 and simultaneously induce apoptosis by lowering BCL2 expression. The co-delivery system (CDS) successfully delivered siRNAs and DOX to the cytoplasm and nuclei, respectively, and resulted in a down-regulation of ABCG2- and BCL2 mRNAs in CSCs by 60% and 65%, respectively, compared to the control. A corresponding decrease in protein expression was observed using Western blotting. The IC50 of DOX in CSCs concurrently decreased significantly. Our result established CDS as a promising multi-drug delivery platform for cancer treatment. STATEMENT OF SIGNIFICANCE: Cancer stem cells (CSCs) are acknowledged to be responsible for increased resistance to chemo-drugs through a combination of increased expression of ABC transporters, an increased anti-apoptotic defense, and/or the ability for extensive DNA repair like normal stem cells. Consequently, effective therapy, especially to CSCs, is urgently required. In current study, we studied the characteristics of 231-CSCs sorted from human MDA-MB-231 breast cancer cells and found that 231-CSCs possessed enhanced proliferation, migration, tumorigenesis, and DOX resistance. We employed a non-ionic surfactant-based vesicle (niosome) delivery system to simultaneously deliver siRNAs targeted to multi-drug resistance genes, and DOX to kill 231-CSCs. The CDS showed an enhanced therapeutic effect by resensitizing 231-CSCs to DOX and may constitute a promising candidate for cancer chemotherapy.

A tissue-engineered therapeutic device inhibits tumor growth in vitro and in vivo.

Bone metastasis is one of the leading causes of death in breast cancer patients. The current treatment is performed as a palliative therapy and the adverse side effects can compromise the patients' quality of life. In order to both effectively treat bone metastasis and avoid the limitation of current strategies, we have invented a drug eluting scaffold with clay matrix release doxorubicin (DESCLAYMR_DOX) to mechanically support the structure after resecting the metastatic tissue while also releasing the anticancer drug doxorubicin which supplements growth inhibition and elimination of the remaining tumor cells. We have previously demonstrated that this device has the capacity to regenerate the bone and provide sustained release of the anticancer drug in vitro. In this study, we focus on the ability of the device to inhibit cancer cell growth in vitro as well as in vivo. Drug-release kinetics was investigated and the cell viability test showed that the tumor inhibitory effect is sustained for up to 4weeks in vitro. Subcutaneous implantation of DESCLAYMR_DOX in athymic mice resulted in significant growth inhibition of human tumor xenografts of breast origin and decelerated multi-organ metastasis formation. Fluorescence images, visualizing doxorubicin, showed a sustained drug release from the DESCLAYMR device in vivo. Furthermore, local use of DESCLAYMR_DOX implantation reduced the incidence of doxorubicin's cardio-toxicity. These results suggest that DESCLAYMR_DOX can be used in reconstructive surgery to support the structure after bone tumor resection and facilitate a sustained release of anticancer drugs in order to prevent tumor recurrence.

Surface-modified functionalized polycaprolactone scaffolds for bone repair: in vitro and in vivo experiments.

A porcine calvaria defect study was carried out to investigate the bone repair potential of three-dimensional (3D)-printed poly-ε-caprolactone (PCL) scaffolds embedded with nanoporous PCL. A microscopic grid network was created by rapid prototyping making a 3D-fused deposition model (FDM-PCL). Afterward, the FDM-PCL scaffolds were infused with a mixture of PCL, water, and 1,4-dioxane and underwent a thermal-induced phase separation (TIPS) followed by lyophilization. The TIPS process lead to a nanoporous structure shielded by the printed microstructure (NSP-PCL). Sixteen Landrace pigs were divided into two groups with 8 and 12 weeks follow-up, respectively. A total of six nonpenetrating holes were drilled in the calvaria of each animal. The size of the cylindrical defects was h 10 mm and Ø 10 mm. The defects were distributed randomly using following groups: (a) NSP-PCL scaffold, (b) FDM-PCL scaffold, (c) autograft, (d) empty defect, (a1) NSP-PCL scaffold + autologous mononuclear cells, and (a2) NSP-PCL scaffold + bone morphogenetic protein 2. Bone volume to total volume was analyzed using microcomputed tomography (µCT) and histomorphometry. The µCT and histological data showed significantly less bone formation in the NSP-PCL scaffolds in all three variations after both 8 and 12 weeks compared to all other groups. The positive autograft control had significantly higher new bone formation compared to all other groups except the FDM-PCL when analyzed using histomorphometry. The NSP-PCL scaffolds were heavily infiltrated with foreign body giant cells suggesting an inflammatory response and perhaps active resorption of the scaffold material. The unmodified FDM-PCL scaffold showed good osteoconductivity and osseointegration after both 8 and 12 weeks.

A novel nano-structured porous polycaprolactone scaffold improves hyaline cartilage repair in a rabbit model compared to a collagen type I/III scaffold: in vitro and in vivo studies.

PURPOSE: To develop a nano-structured porous polycaprolactone (NSP-PCL) scaffold and compare the articular cartilage repair potential with that of a commercially available collagen type I/III (Chondro-Gide) scaffold. METHODS: By combining rapid prototyping and thermally induced phase separation, the NSP-PCL scaffold was produced for matrix-assisted autologous chondrocyte implantation. Lyophilizing a water-dioxane-PCL solution created micro and nano-pores. In vitro: The scaffolds were seeded with rabbit chondrocytes and cultured in hypoxia for 6 days. qRT-PCR was performed using primers for sox9, aggrecan, collagen type 1 and 2. In vivo: 15 New Zealand White Rabbits received bilateral osteochondral defects in the femoral intercondylar grooves. Autologous chondrocytes were harvested 4 weeks prior to surgery. There were 3 treatment groups: (1) NSP-PCL scaffold without cells. (2) The Chondro-Gide scaffold with autologous chondrocytes and (3) NSP-PCL scaffold with autologous chondrocytes. Observation period was 13 weeks. Histological evaluation was made using the O'Driscoll score. RESULTS: In vitro: The expressions of sox9 and aggrecan were higher in the NSP-PCL scaffold, while expression of collagen 1 was lower compared to the Chondro-Gide scaffold. In vivo: Both NSP-PCL scaffolds with and without cells scored significantly higher than the Chondro-Gide scaffold when looking at the structural integrity and the surface regularity of the repair tissue. No differences were found between the NSP-PCL scaffold with and without cells. CONCLUSION: The NSP-PCL scaffold demonstrated higher in vitro expression of chondrogenic markers and had higher in vivo histological scores compared to the Chondro-Gide scaffold. The improved chondrocytic differentiation can potentially produce more hyaline cartilage during clinical cartilage repair. It appears to be a suitable cell-free implant for hyaline cartilage repair and could provide a less costly and more effective treatment option than the Chondro-Gide scaffold with cells.