ABSTRACT
Inhalation of aerosols generated by electronic cigarettes leads to deposition of multiple chemical compounds in the human airways. In this work, an experimental method to determine regional deposition of multicomponent aerosols in an in vitro segmented, realistic human lung geometry was developed and applied to two aerosols, i.e. a monodisperse glycerol aerosol and a multicomponent aerosol. The method comprised the following steps: (1) lung cast model preparation, (2) aerosol generation and exposure, (3) extraction of deposited mass, (4) chemical quantification and (5) data processing. The method showed good agreement with literature data for the deposition efficiency when using a monodisperse glycerol aerosol, with a mass median aerodynamic diameter (MMAD) of 2.3 µm and a constant flow rate of 15 L/min. The highest deposition surface density rate was observed in the bifurcation segments, indicating inertial impaction deposition. The experimental method was also applied to the deposition of a nebulized multicomponent aerosol with a MMAD of 0.50 µm and a constant flow rate of 15 L/min. The deposited amounts of glycerol, propylene glycol and nicotine were quantified. The three analyzed compounds showed similar deposition patterns and fractions as for the monodisperse glycerol aerosol, indicating that the compounds most likely deposited as parts of the same droplets. The developed method can be used to determine regional deposition for multicomponent aerosols, provided that the compounds are of low volatility. The generated data can be used to validate aerosol deposition simulations and to gain insight in deposition of electronic cigarette aerosols in human airways.
Subject(s)
Aerosols/pharmacokinetics , Models, Anatomic , Respiratory System/metabolism , Administration, Inhalation , Glycerol/pharmacokinetics , Humans , Particle SizeABSTRACT
The chemical composition, in vitro genotoxicity, and cytotoxicity of the mainstream aerosol from the Tobacco Heating System 2.2 (THS2.2) were compared with those of the mainstream smoke from the 3R4F reference cigarette. In contrast to the 3R4F, the tobacco plug in the THS2.2 is not burnt. The low operating temperature of THS2.2 caused distinct shifts in the aerosol composition compared with 3R4F. This resulted in a reduction of more than 90% for the majority of the analyzed harmful and potentially harmful constituents (HPHCs), while the mass median aerodynamic diameter of the aerosol remained similar. A reduction of about 90% was also observed when comparing the cytotoxicity determined by the neutral red uptake assay and the mutagenic potency in the mouse lymphoma assay. The THS2.2 aerosol was not mutagenic in the Ames assay. The chemical composition of the THS2.2 aerosol was also evaluated under extreme climatic and puffing conditions. When generating the THS2.2 aerosol under "desert" or "tropical" conditions, the generation of HPHCs was not significantly modified. When using puffing regimens that were more intense than the standard Health Canada Intense (HCI) machine-smoking conditions, the HPHC yields remained lower than when smoking the 3R4F reference cigarette with the HCI regimen.
Subject(s)
Electronic Nicotine Delivery Systems/adverse effects , Harm Reduction , Hot Temperature , Mutagenesis , Mutagenicity Tests/methods , Smoke/adverse effects , Smoking/adverse effects , Tobacco Industry , Tobacco Products/toxicity , Aerosols , Animals , BALB 3T3 Cells , Cell Survival/drug effects , Computational Biology , Consumer Product Safety , Equipment Design , Genomics , Humans , Inhalation Exposure/adverse effects , Mice , Particle Size , Risk Assessment , Smoke/analysis , Smoking/genetics , Tobacco Products/analysisABSTRACT
A LC-MS-MS method capable of the quantitative determination of a range of pesticide residues present in crude extracts from a variety of fruit and vegetables has been developed. Isocratic LC conditions have been used in conjunction with electrospray ionisation tandem mass spectrometry to detect and identify up to 38 pesticides presented as various mixtures in different matrices. The utility of the method is demonstrated by the analysis of crude extracts, with no sample clean up, from grape, kiwi fruit, strawberry, spinach, lemon, peach and nectarine. Mean recoveries ranging from 63 to 96% with relative standard deviations < 20% were obtained for 30 of the 38 pesticides following analysis of organic produce fortified at concentrations between 0.01 and 0.8 mg/kg. Detected residues were quantified from interpolation against calibration data generated using matrix-matched standards that covered analyte concentration ranges between 0.005 and 0.8 microg/ml. Conditions suitable for the qualitative and quantitative confirmation of residues detected in samples are specified.