Understanding the Role of the Otolaryngology Hospitalist: Tracheostomies and Tracheostomy Care.

INTRODUCTION: The concept of a hospitalist has been well established. This model has been associated with reduced length of stay contributing to reduction in healthcare costs. Minimal literature is available assessing the effects of an otolaryngology (ENT) hospitalist at a tertiary medical center. The aim of this study is to assess the role of an ENT hospitalist on (1) performing tracheostomies and (2) providing care as part of the tracheostomy care team (TCT). METHODS: Retrospective chart review of all tracheostomies performed by the ENT service over 2 years (July 2015-June 2017), and prospective data collection of all tracheostomy care consults over 1 year (July 2016-June 2017). In year 1 (from July 2015 to June 2016), no ENT hospitalist was employed, and in year 2 (from July 2016 to June 2017), an ENT hospitalist was employed. RESULTS: Compared to other Ear, Nose, and Throat (ENT) surgeons, the ENT hospitalist performed tracheostomies with shorter patient wait times, and performed a greater proportion of percutaneous tracheostomies at the bedside versus open tracheostomies in the operating room. The tracheostomy care team (TCT) received 91 consults over the course of 1 year with an average of 1.1 billable procedures generated per consult. CONCLUSION: In this study, an ENT hospitalist was decreased patient wait time to tracheostomy and increased bedside percutaneous tracheostomies, which has positive implications for resource utilization and healthcare cost. The average wait time to receive a tracheostomy was reduced when calculated across the entire department due to the availability of the ENT hospitalist to see and perform tracheostomies. The TCT generated many billable bedside procedures in addition to encouraged decannulation of patients. This study highlights the fact that the ENT hospitalist contributes to providing expedient tracheostomies and provides valuable consulting services as part of a TCT at a high-volume tertiary care facility.

The Utility of the Subalar Graft in Nostril Symmetry in Rhinoplasty.

BACKGROUND: A deviated nose can be attributable to multiple anatomical factors, including asymmetric maxilla. A subalar graft helps to correct maxillary hypoplasia and may be a useful tool for correcting a deviated nose. The authors' objective is to show the effects of the subalar graft in improving nostril symmetry and to propose an algorithm for using this graft in open and endonasal rhinoplasty. METHODS: A retrospective case series was performed on patients who had undergone rhinoplasty performed by the senior author (R.W.) from September of 2008 to July of 2015. Patients with at least 3 months of follow-up and adequate photographs were included. The mean follow-up period was 11.0 months (range, 3 to 72 months). A total of 68 patients were included. Preoperative and postoperative photographs were analyzed to measure changes in nasal axis deviation, alar facial angle on base view, alar facial angle on frontal view, and nostril show bilaterally. RESULTS: Of the 68 patients, statistically significant improvement of nasal axis deviation of 4.32 degrees toward the midline was observed. Alar facial angle on base view was improved 1.01 degrees toward the horizontal. Nostril symmetry also improved based on the ratio between the shorter side and the longer side. The mean change in nostril show ratio was 0.19 toward a 1:1 ratio. CONCLUSIONS: Previous studies have shown that the subalar grafting technique is an important adjunctive technique in rhinoplasty for patients with midfacial asymmetries. This case series demonstrates that this technique can provide sustained results in the correction of the nasal foundation. CLINICAL QUESTION/LEVEL OF EVIDENCE: Therapeutic, IV.

Low-Cost, Three-Dimensionally-Printed, Anatomical Models for Optimization of Orbital Wall Reconstruction.

BACKGROUND: Orbital blowout fracture reconstruction often requires an implant, which must be shaped at the time of surgical intervention. This process is time-consuming and requires multiple placement trials, possibly risking complications. Three-dimensional printing technology has enabled health care facilities to generate custom anatomical models to which implants can be molded to precisely match orbital anatomy. The authors present their early experience with these models and their use in optimizing orbital fracture fixation. METHODS: Maxillofacial computed tomographic scans from patients with orbital floor or wall fractures were prospectively obtained and digitally reconstructed. Both injured-side and mirrored unaffected-side models were produced in-house by stereolithography printing technique. Models were used as templates for molding titanium reconstruction plates, and plates were implanted to reconstruct the patients' orbital walls. RESULTS: Nine patients (mean age, 15.5 years) were included. Enophthalmos was present in seven patients preoperatively and resolved in six patients with surgery. All patients had excellent conformation of the implant to the fracture site on postoperative computed tomographic scan. Postoperative fracture-side orbital volumes were significantly less than preoperative, and not significantly different from unfractured-side orbital volumes. Total model preparation time was approximately 10 hours. Materials cost was at most $21. Plate bending time was approximately 60 seconds. CONCLUSIONS: Patient-specific orbital models can speed the shaping of orbital reconstruction implants and potentially improve surgical correction of orbital fractures. Production of these models with consumer-grade technology confers the same advantages as commercial production at a fraction of the cost and time. CLINICAL QUESTION/LEVEL OF EVIDENCE: Therapeutic, IV.

Indications and Outcomes of the Osteoplastic Flap Procedure With or Without Obliteration.

OBJECTIVE: To describe the osteoplastic approach and to perform a systematic review of the indications and outcomes of the osteoplastic flap procedure for frontal sinus surgeries with or without obliteration. DATA SOURCES: PubMed, Medline, Google Scholar, and Cochrane databases. REVIEW METHODS: All published studies in the English language on the osteoplastic flap with or without obliteration were identified from 1905 to 2018. All studies with <20 patients were excluded. The number of patients, technique, indications, follow-up period, symptom relief, revision rates, and complications were recorded and analyzed. RESULTS: A systematic review yielded 25 series containing 1374 patients for analysis. Indications for surgery included chronic frontal sinusitis, mucoceles, fractures or traumas, osteomas, neoplasms, and cerebrospinal fluid leak. The mean follow-up period ranged from 12.8 to 144 months. The percentage of patients needing revisions for frontal sinus disease was 6.2%. There was a high rate of symptomatic improvement (85.0%) and a low rate of major complications (0.7%). However, minor complications occurred in 19.4% of patients. CONCLUSION: The osteoplastic flap with or without obliteration has many indications. In an era where endoscopic technique provides excellent access to the frontal sinuses, external approaches remain a useful adjunct, and/or salvage technique. In experienced hands, the osteoplastic flap can yield excellent long-term clinical results, with low rates of complications. Regardless of the surgical approach, long-term follow-up is necessary due to the recurrent nature of frontal sinus disease.

Silicon carbide zipper photonic crystal optomechanical cavities.

We demonstrate a silicon carbide (SiC) zipper photonic crystal optomechanical cavity. The device is on a 3C-SiC-on-silicon platform and has a compact footprint of ∼30 × 1 µm. The device shows an optical quality of 2800 at telecom and a mechanical quality of 9700 at 12 MHz with an effective mass of ∼3.76 pg. The optical mode and mechanical mode exhibit strong nonlinear interaction, namely, the quadratic spring effect, with a nonlinear spring constant of 3.3 × 104 MHz2/nm. The SiC zipper cavity is potentially useful in sensing and metrology in harsh environments.

An Epidemiological Analysis and Comparison of Single Site and Multiple Site Fracture Repair: An NSQIP Analysis.

We aimed to utilize the 2010 to 2017 National Surgical Quality Improvement Program to evaluate the epidemiology and efficacy of facial fracture repairs, specifically comparing multiple fracture site repairs (MFR) compared to single fracture site repairs (SFR). Of 4739 patients, 718 (15.2%) were found to have undergone MFR. A total of 577 (80.4%) of the MFRs involved the midface only. A total of 2114 (52.6%) of the SFRs were mid-face fractures, while 1825 (45.4%) involved the lower-face and only 82 (2.0%) involved the upper-face. The most frequent MFR was combined orbital and malar/zygoma repair (230 cases [32.0%]). When comparing MFR and SFR of the mid-face, MFR patients were more commonly male, White, operated on by plastic surgeons, presented with contaminated wounds, and active smokers. While MFRs were associated with a longer operative time (P < 0.001) and a longer postoperative hospital stay (P < 0.001), there were no differences in reoperation or readmission. Overall, complication rates were low, but slightly higher in the mid-face MFR group (1.4% in mid-face SFR and 3.0% in mid-face MFR; P = 0.019). Sub-analysis of mid-face only MFRs and middle-lower-face MFRs revealed no difference in postoperative complication rates (3.0% and 7.0%, respectively; P = 0.071). The data presented suggests that MFR are a relatively common occurrence. Although plastic surgeons perform MFRs more frequently, it is currently unclear whether the underlying reason is a product of differences in training, coding patterns, or referral patterns. Though MFRs require more hospital resources, complications rates are low. This will help manage patient expectations and guide patient counseling before surgery, as well as help to plan postoperative care.

An Intraoperative Salvage After Transection of the Greater Palatine Artery During Cleft Palate Repair: A Case for Buccal Fat and Buccal Myomucosal Flaps.

Recently, several adjunctive procedures have gained traction to aid cleft surgeons in repairing especially challenging palatal clefts. Buccal fat flaps and buccal myomucosal flaps have demonstrated particular utility in reinforcing thin palatal flaps or tissue deficits. Although their use has not been widely accepted, they may be particularly helpful in the setting of significant scarring or vascular compromise. Here the authors describe the case of an intraoperative salvage using bilateral buccal fat flaps and a right buccal myomucosal flap after transection of the right Greater Palatine artery (GPA) during palatoplasty on a 14-month old female with Pierre Robin Sequence and a wide Veau II cleft palate. For this operative salvage, bilateral buccal fat flaps were used to reinforce the hard-soft palate junction and a 4 cm × 2 cm flap of the right-sided buccal mucosa and buccinator muscle was inset along the majority of the right-sided soft and posterior hard palate. At 2 years follow-up, the patient had no significant complications and was doing well with healthy-appearing palatal tissue and age-appropriate speech.

Airway Obstruction Risk in Unique Infant Cleft Phenotype: PSIO Protocol Modification Recommendations.

Patients presenting with a unique unilateral cleft phenotype may be at risk of nasal airway obstruction which can be exacerbated by presurgical infant orthopedic (PSIO) appliance therapy and lip taping. Four patients presented to the UPMC Children's Hospital of Pittsburgh Cleft-Craniofacial Center with a cleft phenotype characterized by: An anteriorly projected greater alveolar segment and medial collapse of the lesser segment posteriorly, leading to cleft alar base displacement posteromedial to the anteriorly projected greater segment. Resultant bilateral nasal airway obstruction: cleft ala drape over the leading edge of the greater segment's alveolus (cleft side obstruction) and caudal septum displacement secondary to attachments to the orbicularis oris from the noncleft side (noncleft side obstruction). The patient described presented at 3 months old from an outside institution, where PSIO therapy was undertaken. A second opinion was sought due to concern of significant difficulty in breathing and feeding with the PSIO oral plate. Lip-nose adhesion (LNA) was elected and airway obstruction was immediately relieved after this intervention. Lip-nose adhesion releases the tethered cleft side alar base from the pyriform rim of the posteromedially collapsed lesser segment and unites the superior lip and nostril sill-relieving the cleft side nostril obstruction. During the LNA, the caudal septum is surgically released from the anterior nasal spine and is uprighted, relieving the obstructed noncleft nostril. In this cleft anatomy, the treatment alternatives of modification to the PSIO appliance or LNA should be carefully considered in consultation with the surgeon, PSIO provider, and the infant's caretakers.

Demineralized Bone Matrix and Resorbable Mesh Bilaminate Cranioplasty Is Ineffective for Secondary Reconstruction of Large Pediatric Cranial Defects.

Replacement of the autologous bone flap after decompressive craniectomy can be complicated by significant osteolysis or infection with large defects over scarred dura. Demineralized bone matrix is an alternative to autologous reconstruction, effective when reconstructing large defects using a resorbable mesh bilaminate technique in primary cranioplasty, but this technique has not been studied for revision cranioplasty and the setting of scarred dura. Retrospective review was performed of patients receiving demineralized bone matrix and resorbable mesh bilaminate cranioplasty for postdecompressive craniectomy defects. Seven patients (mean age, 4.2 years) were identified with a mean follow-up of 4.0 years. Computed tomography before the demineralized bone matrix and resorbable mesh bilaminate cranioplasty and at least 1 year postoperatively were compared. Defects were characterized and need for revision was assessed. All patients had craniectomy with associated hemidural scarring. Five patients had autologous bone flap cranioplasty associated with nearly total osteolysis, and two patients had deferral of bone flap before demineralized bone matrix and resorbable mesh bilaminate cranioplasty. Demineralized bone matrix and resorbable mesh bilaminate cranioplasty demonstrated unpredictable and poor ossification, with bony coverage unchanged at postoperative follow-up. All patients required major revision cranioplasty at a mean time of 2.5 years. Porous polyethylene was successfully used in six of the revisions, whereas exchange cranioplasty was used in the remaining patient, with a mean follow-up of 1.4 years. Although demineralized bone matrix and resorbable mesh bilaminate is appropriate for primary cranioplasty, it should be avoided in the setting of scarred or infected dura in favor of synthetic materials or exchange cranioplasty. CLINICAL QUESTION/LEVEL OF EVIDENCE:: Therapeutic, IV.

Silicon carbide double-microdisk resonator.

We demonstrate the first silicon carbide (SiC) double-microdisk resonator (DMR). The device has a compact footprint with a radius of 24 µm and operates in the ITU high frequency range (3-30 MHz). We develop a multi-layer nanofabrication recipe that yields high optical quality (Q∼105) for the SiC DMR. Because of its strong optomechanical interaction, we observe the thermal-Brownian motions of mechanical modes in a SiC DMR directly at room temperature for the first time, to the best of our knowledge. The observed mechanical modes include fundamental/second-order common modes and fundamental differential (D1) modes. The D1 modes have high mechanical qualities >3800 at around 18.4 MHz tested in vacuum. We further show that optomechanical interactions, including linear and nonlinear optomechanical spring effects, can be observed in a SiC DMR at sub-milliwatt optical power. The SiC DMR has great potential for low-power optomechanical sensing applications in harsh environments.

Bloch mode selection in silicon photonic crystal microring resonators.

A novel method of selecting a subset of Bloch modes in silicon-based photonic crystal microring resonators (PhCR)s is demonstrated. Bloch modes in the PhCR are calculated, and their intensity beating patterns are analyzed. Based on the different spatial intensity distribution for each resonance, a subset of resonances is out-coupled using an output coupler waveguide (CWG) which is positioned at an angle θ=90° with respect to the input CWG. As shown in theory and experiment, resonances with an even mode number are selected, while resonances with an odd mode number are rejected. The highest contrast between mode selection and mode rejection is ∼9 dB in the experiments. This approach opens another design freedom for ring resonator-based devices and could potentially reduce the footprint of microring resonator-based multiplexers and add-drop filters.

Cervical Spine Injury From Unrecognized Craniocervical Instability in Severe Pierre Robin Sequence Associated With Skeletal Dysplasia.

Pierre Robin Sequence (PRS) can be associated with skeletal dysplasias, presenting with craniocervical instability and devastating spinal injury if unrecognized. The authors present the case of an infant with PRS and a type II collagenopathy who underwent multiple airway-securing procedures requiring spinal manipulation before craniocervical instability was identified. This resulted in severe cervical cord compression due to odontoid fracture and occipitoatlantoaxial instability. This case highlights the importance of early cervical spine imaging and cautious manipulation in infants with PRS and suspected skeletal dysplasia.

Regenerative Endodontic Procedures among Endodontists: A Web-based Survey.

INTRODUCTION: The protocols that endodontists implement for regenerative endodontic procedures (REPs) are unknown. The aim of this study was to examine current REP protocols among practicing endodontists in the United States. METHODS: A Web-based survey was sent to 4060 active members of the American Association of Endodontists (AAE). A total of 850 participants completed the survey, representing a 20.9% response rate. RESULTS: Responses indicated 60% reported having performed REPs; most performed 1 to 3 per year. The most commonly selected source (60.8%) for the clinical protocol was the "AAE Clinical Considerations for a Regenerative Procedure." Time constraints were the most common reason why 92.4% of respondents did not report their REP cases to the AAE.org database; additionally, 15.5% were unaware of it. Almost half (49.8%) of the participants reported they would attempt an REP on a patient of any age. The most commonly used irrigants were >3% sodium hypochlorite at the first appointment and EDTA at the scaffold formation appointment. As the intracanal medicament, 52.2% used calcium hydroxide, whereas 23.5% used triple antibiotic paste. At the scaffold formation appointment, 77.1% used a local anesthetic without a vasoconstrictor, and 94.3% used a blood clot as the scaffold. Mineral trioxide aggregate was the coronal barrier most often selected. Considering factors most likely to encourage the use of REPs in the future, 79.8% reported the availability of good candidates followed by 40.1% who desired better evidence. CONCLUSIONS: Based on the results of this survey, REP protocols appear to be heterogeneous and do not strictly conform to the "AAE Clinical Considerations for a Regenerative Procedure."