Instantaneous Thermal Energy for Swift Synthesis of Single-Atom Catalysts for Unparalleled Performance in Metal-Air Batteries and Fuel Cells.

Based on experimental and computational evidence, phthalocyanine (Pc) compounds in the form of quaternary bound metal-nitrogen (N) atoms are the most effective catalysts for oxygen reduction reaction (ORR). However, the heat treatment process used in their synthesis may compromise the ideal structure, causing the agglomeration of transition metals. To overcome this issue, we developed a novel method for synthesizing iron (Fe) single-atom catalysts with ideal structures supported by thermally exfoliated graphene oxide (GO). This was achieved through a short heat-treatment of only 2.5 min involving FePc and N,N-dimethylformamide in the presence of GO. According to the synthesis mechanism revealed by this study, carbon monoxide acts as a strong linker between the single Fe atoms and graphene. It facilitates the formation of a structure containing oxygen species between FeN4 and graphene, which provides high activity and stability for the ORR. These catalysts possess an enormous number of active sites and exhibit enhanced activity towards the alkaline ORR. They have demonstrated excellent performance when applied to real electrochemical devices, such as zinc-air batteries and anion exchange membrane fuel cells. We expect that the instantaneous heat treatment method developed in our study will aid in the development of high-performing single-atom catalysts. This article is protected by copyright. All rights reserved.

A Multimodal Evaluation of Podcast Learning, Retention, and Electroencephalographically Measured Attention in Medical Trainees.

INTRODUCTION: Podcasts have become popular among medical trainees. However, it is unclear how well learners retain information from podcasts compared to traditional educational modalities, and whether multitasking affects the learner's ability to pay attention and learn. This study attempted to examine the effectiveness of podcast learning by using electroencephalography (EEG) to measure learner attention, in addition to test performance, task load, and preferences. METHODS: The study used a repeated measures design with three conditions: podcast listening on a treadmill, podcast listening seated, and textbook reading seated. Participants were anesthesiology residents and medical students at a large United States academic medical center. Three topics were chosen: allergic response, liver physiology, and statistics. Each participant studied all three topics that were randomly assigned to one of three learning conditions - in random order. Participants completed a knowledge test at baseline, after each condition, and at four-week follow-up, and reported preferred learning modality and task load under each modality. Activation levels in alerting, orienting, and executive attentional networks were examined using EEG.  Results: Sixty-one participants (11 anesthesiology residents and 50 medical students) were included in the study. Of the 61, six were excluded from the EEG analyses due to corrupted recordings. EEG results showed that mean attention network activation scores did not differ between the study conditions. Trainees preferred podcast learning over reading for all three topics. When compared to textbook reading, podcast learning (seated or on a treadmill) produced significantly better learning gain, and equivalent retention for two of the three topics. CONCLUSIONS: Our study is the first to use neurocognitive data, self-reported satisfaction, and knowledge test performance to demonstrate that podcasts are at least equivalent to textbooks for maintaining attention, immediate learning, and retention - even while exercising.

Metastable hexagonal close-packed palladium hydride in liquid cell TEM.

Metastable phases-kinetically favoured structures-are ubiquitous in nature1,2. Rather than forming thermodynamically stable ground-state structures, crystals grown from high-energy precursors often initially adopt metastable structures depending on the initial conditions, such as temperature, pressure or crystal size1,3,4. As the crystals grow further, they typically undergo a series of transformations from metastable phases to lower-energy and ultimately energetically stable phases1,3,4. Metastable phases sometimes exhibit superior physicochemical properties and, hence, the discovery and synthesis of new metastable phases are promising avenues for innovations in materials science1,5. However, the search for metastable materials has mainly been heuristic, performed on the basis of experiences, intuition or even speculative predictions, namely 'rules of thumb'. This limitation necessitates the advent of a new paradigm to discover new metastable phases based on rational design. Such a design rule is embodied in the discovery of a metastable hexagonal close-packed (hcp) palladium hydride (PdHx) synthesized in a liquid cell transmission electron microscope. The metastable hcp structure is stabilized through a unique interplay between the precursor concentrations in the solution: a sufficient supply of hydrogen (H) favours the hcp structure on the subnanometre scale, and an insufficient supply of Pd inhibits further growth and subsequent transition towards the thermodynamically stable face-centred cubic structure. These findings provide thermodynamic insights into metastability engineering strategies that can be deployed to discover new metastable phases.

Molecular Crosstalk Between Circadian Rhythmicity and the Development of Neurodegenerative Disorders.

Neurodegenerative disorders have been shown to exhibit substantial interconnectedness with circadian rhythmicity. Alzheimer's patients exhibit high degradation of the suprachiasmatic nucleus (SCN), the central endogenous circadian timekeeper, and Parkinson's patients have highly disrupted peripheral clock gene expression. Disrupted sleep patterns are highly evident in patients with neurodegenerative diseases; fragmented sleep has been shown to affect tau-protein accumulation in Alzheimer's patients, and rapid eye movement (REM) behavioral disorder is observed in a significant amount of Parkinson's patients. Although numerous studies exist analyzing the mechanisms of neurodegeneration and circadian rhythm function independently, molecular mechanisms establishing specific links between the two must be explored further. Thus, in this review, we explore the possible intersecting molecular mechanisms between circadian rhythm and neurodegeneration, with a particular focus on Parkinson's disease. We provide evidence for potential influences of E3 ligase and poly adenosine diphosphate (ADP-ribose) polymerase 1 (PARP1) activity on neurodegenerative pathology. The cellular stress and subsequent DNA damage signaling imposed by hyperactivity of these multiple molecular systems in addition to aberrant circadian rhythmicity lead to extensive protein aggregation such as α-synuclein pre-formed fibrils (α-Syn PFFs), suggesting a specific molecular pathway linking circadian rhythmicity, PARP1/E3 ligase activity, and Parkinson's disease.

Systematic Study on the Morphological Development of Blade-Coated Conjugated Polymer Thin Films via In Situ Measurements.

The morphology of conjugated polymer thin films, determined by the kinetics of film drying, is closely correlated with their electrical properties. Herein, we focused on dramatic changes in the thin-film morphology of blade-coated poly{[N,N'-bis(2-octyldodecyl)-naphthalene-1,4,5,8-bis(dicarboximide)-2,6-diyl]-alt-5,5'-(2,2'-bithiophene)} caused by the effect of solvent and coating temperature. Through in situ measurements, the evolution of polymer aggregates and crystallites, which plays a decisive role in the formation of the charge-transport pathway, was observed in real time. By combining in situ ultraviolet-visible spectroscopy and in situ grazing-incidence wide-angle X-ray scattering analysis, we could identify five distinct stages during the blade-coating process; these stages were observed irrespective of the solvent and coating temperature used. The five stages are described in detail with a proposed model of film formation. This insight is an important step in understanding the relationship between the morphology of thin polymer films and their charge-transport properties as well as in optimizing the structural evolution of thin films.

Tripodal RNA with 3' Overhangs Prevents RIG-I-Mediated Innate Immune Response.

RNA interference (RNAi) offers great promise in life science research and therapeutic development, as it easily achieves a potent target gene knockdown with high specificity. Since the conventional small interfering RNA (siRNA) structure, known as 19 bp double-stranded RNA (dsRNA) with 2-nucleotide (nt) 3' overhang, has been introduced to successfully elicit the RNAi in mammalian cells, a variety of structural variants of RNAi trigger have been developed. Our group previously reported branched, tripodal interfering RNA (tiRNA) structures as a multigene targeting RNA structure inducing RNAi. However, the immune stimulatory effect of branched tiRNA structure has not been thoroughly evaluated. In this study, we show that tiRNA with blunt ends triggers innate immune response in T98G cell and mouse macrophage cells, which is dependent upon the retinoic acid-inducible gene I (RIG-I), a well-known cytoplasmic dsRNA sensor. Interestingly, immune response triggered by tiRNA can be suppressed by the introduction of 2-nt 3' overhang structure. Our finding expands the structural diversity of RIG-I ligands and provides a guide to develop a safe multitargeting RNA structure for therapeutic application.

Slot-Die Coated Perovskite Films Using Mixed Lead Precursors for Highly Reproducible and Large-Area Solar Cells.

Recently, many kinds of printing processes have been studied to fabricate perovskite solar cells (PeSCs) for mass production. Among them, slot-die coating is a promising candidate for roll-to-roll processing because of high-throughput, easy module patterning, and a premetered coating system. In this work, we employed mixed lead precursors consisting of PbAc2 and PbCl2 to fabricate PeSCs via slot-die coating. We observed that slot-die-coated perovskite films based on the mixed lead precursors exhibited well-grown and uniform morphology, which was hard to achieve by using only a single lead source. Consequently, PeSCs made with this precursor system showed improved device performance and reproducibility over single PbAc2. Lastly, a large-area module with an active area of 10 cm2 was fabricated with a power conversion efficiency of 8.3%.

Small-Molecule Organic Photovoltaic Modules Fabricated via Halogen-Free Solvent System with Roll-to-Roll Compatible Scalable Printing Method.

For the first time, the photovoltaic modules composed of small molecule were successfully fabricated by using roll-to-roll compatible printing techniques. In this study, blend films of small molecules, BTR and PC71BM were slot-die coated using a halogen-free solvent system. As a result, high efficiencies of 7.46% and 6.56% were achieved from time-consuming solvent vapor annealing (SVA) treatment and roll-to-roll compatible solvent additive approaches, respectively. After successful verification of our roll-to-roll compatible method on small-area devices, we further fabricated large-area photovoltaic modules with a total active area of 10 cm2, achieving a power conversion efficiency (PCE) of 4.83%. This demonstration of large-area photovoltaic modules through roll-to-roll compatible printing methods, even based on a halogen-free solvent, suggests the great potential for the industrial-scale production of organic solar cells (OSCs).

Selective Morphology Control of Bulk Heterojunction in Polymer Solar Cells Using Binary Processing Additives.

We report the effect of binary additives on the fabrication of polymer solar cells (PSCs) based on a bulk heterojunction (BHJ) system. The combination of 1,8-diiodooctane (DIO), a high-boiling and selective solvent, for fullerene derivatives and poly(dimethylsiloxane) (PDMS) precursor, a nonvolatile insulating additive, affords complementary functions on the effective modulation of BHJ morphology. It was found that DIO and PDMS precursor each play different roles in the control of BHJ morphology, and thus, the power conversion efficiency (PCE) can be further enhanced to 7.6% by improving the fill factor (FF) from 6.8% compared to that achieved using a conventional device employing only a DIO additive. In the BHJ of the active layer, DIO suppressed the large phase separation of PBDTTT-CF and PC71BM while allowing the formation of continuous polymer networks in the donor polymer through phase separation of the PDMS precursor and BHJ components. The appropriate amount of PDMS precursor does not disturb charge transport in the BHJ despite having insulating properties. In addition, the dependence of photovoltaic parameters on different light intensities reveals that the charge recombination in the device with DIO and PDMS precursor decreases compared to that achieved using the device with only DIO.

Planar heterojunction perovskite solar cells with superior reproducibility.

Perovskite solar cells (PeSCs) have been considered one of the competitive next generation power sources. To date, light-to-electric conversion efficiencies have rapidly increased to over 10%, and further improvements are expected. However, the poor device reproducibility of PeSCs ascribed to their inhomogeneously covered film morphology has hindered their practical application. Here, we demonstrate high-performance PeSCs with superior reproducibility by introducing small amounts of N-cyclohexyl-2-pyrrolidone (CHP) as a morphology controller into N,N-dimethylformamide (DMF). As a result, highly homogeneous film morphology, similar to that achieved by vacuum-deposition methods, as well as a high PCE of 10% and an extremely small performance deviation within 0.14% were achieved. This study represents a method for realizing efficient and reproducible planar heterojunction (PHJ) PeSCs through morphology control, taking a major step forward in the low-cost and rapid production of PeSCs by solving one of the biggest problems of PHJ perovskite photovoltaic technology through a facile method.

Rapid detection of Mycobacterium tuberculosis using a novel ultrafast chip-type real-time polymerase chain reaction system.

BACKGROUND: NBS LabChip G2-3 is a novel, ultrafast, chip-type portable real-time polymerase chain reaction (PCR) system. We evaluated the clinical usefulness of this system in detecting pulmonary TB and assessed its diagnostic performance compared with a conventional tube-type PCR system. METHODS: A total of 247 sputum samples were collected from patients suspected of having pulmonary TB. After the decontamination process, these samples were examined by fluorescence staining for acid-fast bacilli, cultures with both solid and liquid media, and real-time PCR with the NBS LabChip and a conventional tube-type system. The diagnostic accuracy of the NBS LabChip system and the agreement between the two assays were evaluated. RESULTS: Considering mycobacterial culture results as a gold standard, the overall sensitivity and specificity of the NBS LabChip was 83.8% (95% CI, 73.8%-91.1%) and 94.0% (95% CI, 89.3%-97.1%), respectively. For the detection of TB from the smear-positive samples, the sensitivity and specificity of the NBS LabChip was 96.0% (95% CI, 86.3%-99.5%) and 83.3% (95% CI, 72.3%-95.7%), respectively. For the smear-negative samples, the sensitivity and specificity of the NBS LabChip was 63.3% (95% CI, 43.9%-80.1%) and 95.0% (95% CI, 90.4%-97.8%), respectively. There were no significant differences in the sensitivity and specificity between the NBS LabChip and a conventional tube-type system, although the NBS LabChip shortened the PCR time (27 min for 45 cycles). CONCLUSIONS: The NBS LabChip G2-3 system has potential as an ultrafast, cost-effective diagnostic tool for pulmonary TB with high sensitivity and specificity.

Effects of air transportation cause physiological and biochemical changes indicative of stress leading to regulation of chaperone expression levels and corticosterone concentration.

Laboratory animals generally experience numerous unfamiliar environmental and psychological influences such as noises, temperatures, handling, shaking, and smells during the process of air transportation. To investigate whether stress induced by air transportation affects stress-related factors in animals, the levels of hormone and chaperone protein were measured in several tissues of F344 rats transported for 13 h and not transported. Herein, we conclude that the levels of corticosterone, HSP70, and GRP78 were significantly increased in the transported group compare to not transported group, but they were rapidly restored to the not transported group level after a recovery period of one week. However, the magnitude of induction and restoration levels of these factors varied depending on the tissue type. Thus, these results suggest that air transportation should be considered for the improvement of laboratory animal health and to reduce the incidence of laboratory animal stress.