ABSTRACT
Tyrosinase-mediated protein conjugation has recently drawn attention as a site-specific protein modification tool under mild conditions. However, the tyrosinases reported to date act only on extremely exposed tyrosine residues, which limits where the target tyrosine can be located. Herein, we report a tyrosinase from Streptomyces avermitilis (SaTYR), that exhibits a much higher activity against tyrosine residues on the protein surface than other tyrosinases. We determined the crystal structure of SaTYR and revealed that the enzyme has a relatively flat and shallow substrate-binding pocket to accommodate a protein substrate. We demonstrated SaTYR-mediated fluorescence dye tagging and PEGylation of a surface tyrosine residue that was unreacted by other tyrosinases with an approximately 95.2 % conjugation yield in 1 h. We also present a structural rationale that considers the steric hindrance from adjacent residues and surrounding structures along with the extent of solvent exposure of residues, as necessary when determining the optimal positions for introducing target tyrosine residues in SaTYR-mediated protein modification. The study demonstrated that the novel tyrosinase, SaTYR, extends the scope of tyrosinase-mediated protein modification, and we propose that site-specific tyrosine conjugation using SaTYR is a promising strategy for protein bioconjugation in various applications.
Subject(s)
Monophenol Monooxygenase , Streptomyces , Monophenol Monooxygenase/metabolism , Proteins/metabolism , Tyrosine/chemistryABSTRACT
The mesophilic PETase from Ideonella sakaiensis (IsPETase) has been shown to exhibit high PET hydrolysis activity, but its low stability limits its industrial applications. Here, we developed a variant, Z1-PETase, with enhanced soluble protein yield and durability while maintaining or improving activity at lower temperatures. The selected Z1-PETase not only exhibited a 20-fold improvement in soluble protein yield compared to the previously engineered IsPETaseS121E/D186H/S242T/N246D (4p) variant, but also demonstrated a 30% increase in low-temperature activity at 40 °C, along with an 11 °C increase in its TmD value. The PET depolymerization test across a temperature range low to high (30-70 °C) confirmed that Z1-PETase exhibits high accessibility of mesophilic PET hydrolase and rapid depolymerizing rate at higher temperature in accordance with the thermal behaviors of polymer and enzyme. Additionally, structural interpretation indicated that the stabilization of specific active site loops in Z1-PETase contributes to enhanced thermostability without adversely impacting enzymatic activity. In a pH-stat bioreactor, Z1-PETase depolymerized > 90% of both transparent and colored post-consumer PET powders within 24 and 8 h at 40 °C and 55 °C, respectively, demonstrating that the utility of this IsPETase variant in the bio-recycling of PET.
Subject(s)
Bioreactors , Hydrolases , Hydrolysis , Polymers , PowdersABSTRACT
Ideonella sakaiensis is the bacterium that can survive by degrading polyethylene terephthalate (PET) plastic, and terephthalic acid (TPA) binding protein (IsTBP) is an essential periplasmic protein for uptake of TPA into the cytosol for complete degradation of PET. Here, we demonstrated that IsTBP has remarkably high specificity for TPA among 33 monophenolic compounds and two 1,6-dicarboxylic acids tested. Structural comparisons with 6-carboxylic acid binding protein (RpAdpC) and TBP from Comamonas sp. E6 (CsTphC) revealed the key structural features that contribute to high TPA specificity and affinity of IsTBP. We also elucidated the molecular mechanism underlying the conformational change upon TPA binding. In addition, we developed the IsTBP variant with enhanced TPA sensitivity, which can be expanded for the use of TBP as a biosensor for PET degradation.
Subject(s)
Burkholderiales , Comamonas , Phthalic Acids , Phthalic Acids/chemistry , Hydrolases/chemistryABSTRACT
Bioconversion of the C1 compounds into value-added products is one of the CO2-reducing strategies. In particular, because CO2 can be easily converted into formate, the efficient and direct bioconversion of CO2 through formate assimilation is attracting attention. The tetrahydrofolate (THF) cycle is the highly efficient reconstructed formate assimilation pathway, and 5,10-methenyltetrahydrofolate cyclohydrolase (FchA) is an essential enzyme involved in the THF cycle. In this study, a kinetic analysis of FchA from Methylobacterium extorquens AM1 (MeFchA) was performed and revealed that the enzyme has much higher cyclization than hydrolyzation activity, making it an optimal enzyme for formate assimilation. The crystal structure of MeFchA in the apo- and the THF-complexed forms was also determined, revealing that the substrate-binding site of the enzyme has three differently charged regions to stabilize the three differently charged moieties of the formyl-THF substrate. The residues involved in the substrate binding were also verified through site-directed mutagenesis. This study provides a biochemical and structural basis for the molecular mechanism underlying formate assimilation.
Subject(s)
Methenyltetrahydrofolate Cyclohydrolase , Methylobacterium extorquens , Binding Sites , Kinetics , Methenyltetrahydrofolate Cyclohydrolase/metabolism , Methylobacterium extorquens/genetics , Methylobacterium extorquens/metabolism , Mutagenesis, Site-DirectedABSTRACT
Biodegradation of polyethylene terephthalate (PET) is one of fundamental ways to solve plastic pollution. As various microbial hydrolases have an extra domain unlike PETase from Ideonella sakaiensis (IsPETase), research on the role of these extra domain in PET hydrolysis is crucial for the identification and selection of a novel PET hydrolase. Here, we report that a PET hydrolase from Burkholderiales bacterium RIFCSPLOWO2_02_FULL_57_36 (BbPETase) with an additional N-terminal domain (BbPETaseAND) shows a similar hydrolysis activity toward microcrystalline PET and a higher thermal stability than IsPETase. Based on detailed structural comparisons between BbPETase and IsPETase, we generated the BbPETaseS335N/T338I/M363I/N365G variant with an enhanced PET-degrading activity and thermal stability. We further revealed that BbPETaseAND contributes to the thermal stability of the enzyme through close contact with the core domain, but the domain might hinder the adhesion of enzyme to PET substrate. We suggest that BbPETase is an enzyme in the evolution of efficient PET degradation and molecular insight into a novel PET hydrolase provides a novel strategy for the development of biodegradation of PET.
Subject(s)
Burkholderiales , Hydrolases , Burkholderiales/metabolism , Hydrolases/metabolism , Hydrolysis , Polyethylene Terephthalates/chemistry , Polyethylene Terephthalates/metabolismABSTRACT
Catechol O-methyltransferase (COMT) is an enzyme that transfers a methyl group to the catechol-derivative substrates using S-adenosyl-l-methionine (SAM) and Mg2+. We report the biochemical and structural analysis of COMT from Niastella koreensis (NkCOMT). NkCOMT showed the highest activity with Mg2+, although the enzyme also showed a significant level of activity with Cu2+ and Zn2+. NkCOMT structures complexed with SAH and Mg2+ elucidated how the enzyme stabilized the cosubstrate and the metal ion and revealed that the region near the SAM binding site undergoes conformational changes upon the binding of the cosubstrate and the metal ion. We also identified the catechol binding pocket of the enzyme and explained a broad substrate specificity of the bacterial enzyme and its ability to accommodate the catechol derivatives. In addition, we developed the NkCOMTE211R and NkCOMTE211K variants that showed both enhanced activities and regiospecificity for the production of the para-forms. Our study provides a structural basis for regiospecificity of NkCOMT, which is related with the conformational change upon binding of SAM and Mg2+.
Subject(s)
Catechol O-Methyltransferase , S-Adenosylmethionine , Bacteroidetes , Catechol O-Methyltransferase/genetics , Catechol O-Methyltransferase/metabolism , Substrate SpecificityABSTRACT
The glyoxylate cycle is an important anabolic pathway and acts under a C2 compound (such as acetic acid) rich condition in bacteria. The isocitrate lyase (ICL) enzyme catalyzes the first step in the glyoxylate cycle, which is the cleavage of isocitrate to glyoxylate and succinate. This enzyme is a metalo-enzyme that contains an Mg2+ or a Mn2+ion at the active site for enzyme catalysis. We expressed and purified ICL from Bacillus cereus (BcICL) and investigated its biochemical properties and metal usage through its enzyme activity and stability with various divalent metal ion. Based on the results, BcICL mainly utilized the Mg2+ ion for enzyme catalysis as well as the Mn2+, Ni2+ and Co2+ ions. To elucidate its molecular mechanisms, we determined the crystal structure of BcICL at 1.79 Å. Through this structure, we analyzed a tetrameric interaction of the protein. We also determined the BcICL structure in complex with both the metal and its products, glyoxylate and succinate at 2.50 Å resolution and revealed each ligand binding modes.
Subject(s)
Bacillus cereus/enzymology , Isocitrate Lyase/chemistry , Catalytic Domain , Crystallography, X-Ray , Glyoxylates/chemistry , Isocitrate Lyase/metabolism , Magnesium/chemistry , Metals/chemistry , Models, Molecular , Protein Multimerization , Sequence Alignment , Sequence Analysis, Protein , Succinic Acid/chemistryABSTRACT
Poly(ethylene terephthalate) (PET), a widely used plastic around the world, causes various environmental and health problems. Several groups have been extensively conducting research to solve these problems through enzymatic degradation of PET at high temperatures around 70⯰C. Recently, Ideonella sakaiensis, a bacterium that degrades PET at mild temperatures, has been newly identified, and further protein engineering studies on the PET degrading enzyme from the organism (IsPETase) have also been conducted to overcome the low thermal stability of the enzyme. In this study, we performed structural bioinformatics-based protein engineering of IsPETase to optimize the substrate binding site of the enzyme and developed two variants, IsPETaseS242T and IsPETaseN246D, with higher enzymatic activity at both 25 and 37⯰C compared with IsPETaseWT. We also developed the IsPETaseS121E/D186H/S242T/N246D variant by integrating the S242â¯T and N246D mutations into the previously reported IsPETaseS121E/D186H/R208A variant. At the 37⯰C incubation, the quadruple variant maintained the PET degradation activity for 20 days, unlike IsPETaseWT that lost its activity within a day. Consequently, this study exhibited 58-fold increase in the activity compared with IsPETaseWT.
Subject(s)
Bacterial Proteins/metabolism , Burkholderiales/enzymology , Polyethylene Terephthalates/metabolism , Bacterial Proteins/chemistry , Bacterial Proteins/genetics , Binding Sites , Biodegradation, Environmental , Burkholderiales/genetics , Computational Biology , Enzyme Stability , Mutation , Polyethylene Terephthalates/chemistry , Protein Engineering , TemperatureABSTRACT
Methylobacterium extorquens is a methylotroph model organism that has the ability to assimilate formate using the tetrahydrofolate (THF) pathway. The formate-tetrahydrofolate ligase from M. extorquens (MeFtfL) is an enzyme involved in the THF pathway that catalyzes the conversion of formate, THF, and ATP into formyltetrahydrofolate and ADP. To investigate the biochemical properties of MeFtfL, we evaluated the metal usage and enzyme kinetics of the enzyme. MeFtfL uses the Mg ion for catalytic activity, but also has activity for Mn and Ca ions. The enzyme kinetics analysis revealed that Km value of farmate was much higher than THF and ATP, which shows that the ligation activity of MeFtfL is highly dependent on formation concentration. We also determined the crystal structure of MeFtfL at 2.8 Å resolution. MeFtfL functions as a tetramer, and each monomer consists of three domains. The structural superposition of MeFtfL with FtfL from Moorella thermoacetica allowed us to predict the substrate binding site of the enzyme.
Subject(s)
Bacterial Proteins/chemistry , Bacterial Proteins/metabolism , Formate-Tetrahydrofolate Ligase/chemistry , Formate-Tetrahydrofolate Ligase/metabolism , Methylobacterium extorquens/enzymology , Bacterial Proteins/genetics , Catalytic Domain , Crystallography, X-Ray , Formate-Tetrahydrofolate Ligase/genetics , Formates/metabolism , Kinetics , Metabolic Networks and Pathways , Methylobacterium extorquens/genetics , Models, Molecular , Protein Interaction Domains and Motifs , Protein Structure, Quaternary , Recombinant Proteins/chemistry , Recombinant Proteins/genetics , Recombinant Proteins/metabolismABSTRACT
Metallosphaera sedula is a thermoacidophilic archaeon and has an incomplete TCA/glyoxylate cycle that is used for production of biosynthetic precursors of essential metabolites. Citrate synthase from M. sedula (MsCS) is an enzyme involved in the first step of the incomplete TCA/glyoxylate cycle by converting oxaloacetate and acetyl-CoA into citrate and coenzyme A. To elucidate the inhibition properties of MsCS, we determined its crystal structure at 1.7 Å resolution. Like other Type-I CS, MsCS functions as a dimer and each monomer consists of two distinct domains, a large domain and a small domain. The oxaloacetate binding site locates at the cleft between the two domains, and the active site was more closed upon binding of the oxaloacetate substrate than binding of the citrate product. Interestingly, the inhibition kinetic analysis showed that, unlike other Type-I CSs, MsCS is non-competitively inhibited by NADH. Finally, amino acids and structural comparison of MsCS with other Type-II CSs, which were reported to be non-competitively inhibited by NADH, revealed that MsCS has quite unique NADH binding mode for non-competitive inhibition.
Subject(s)
Archaeal Proteins , Citrate (si)-Synthase , Enzyme Inhibitors/chemistry , Protein Multimerization , Sulfolobaceae/enzymology , Archaeal Proteins/antagonists & inhibitors , Archaeal Proteins/chemistry , Binding Sites , Citrate (si)-Synthase/antagonists & inhibitors , Citrate (si)-Synthase/chemistry , Crystallography, X-Ray , Protein Structure, Quaternary , Substrate SpecificityABSTRACT
Metallosphaera sedula is a thermoacidophilic archaeon that has carbon fixation ability using the 3-hydroxypropionate/4-hydroxybutyrate(3-HP/4-HB) cycle, and has an incomplete TCA cycle to produce necessary biosynthetic precursors. The citrate synthase from M. sedula (MsCS) is an enzyme involved in the first step of the incomplete TCA cycle, catalyzing the conversion of oxaloacetate and acetyl-CoA into citrate and coenzyme A. To investigate the molecular mechanism of MsCS, we determined its crystal structure at 1.8â¯Å resolution. As other known CSs, MsCS functions as a dimer, and each monomer consists of two domains, a large domain and a small domain. We also determined the structure of the complex with acetyl-CoA and revealed the acetyl-CoA binding mode of MsCS. Structural comparison of MsCS with another CS in complex with oxaloacetate enabled us to predict the oxaloacetate binding site. Moreover, we performed inhibitory kinetic analyses of MsCS, and showed that the protein is inhibited by citrate and ATP by competitive and non-competitive inhibition modes, respectively, but not by NADH. Based on these results, we suggest that MsCS belongs to the type-I CS with structural and biochemical properties similar to those of CSs involved in the conventional TCA cycle.