Icosahedral supracrystal assembly from polymer-grafted nanoparticles via interplay of interfacial energy and confinement effect.

Self-assembly of nanoparticles (NPs) in drying emulsion droplets paves the way for intricate three-dimensional (3D) superstructures, given the myriad of control parameters for fine-tuning assembly conditions. With their substantial energetic dynamics that are acutely responsive to emulsion confinements, polymeric ligands incorporated into a system can enrich its structural diversity. Here, we demonstrate the assembly of soft polymer-grafted NPs into Mackay icosahedrons beyond spherical body-centered cubic (BCC) packing structures commonly observed for these soft spheres. This behavior is governed by the free energy minimization within emulsions through the interplay of the oil-water interfacial energy and confinement effect as demonstrated by the experimental observations of structural transitions between icosahedrons and BCC crystals and by corresponding free energy calculations. The anisotropic surface of the icosahedral supracrystals provides the capability of guiding the position of a secondary constituent, creating unique hybrid patchy icosahedrons with the potential to develop into multifunctional 3D clusters that combine the benefits of both polymers and conventional colloids.

Synthesis and characterization of nitrogen-doped-MWCNT@cobalt oxide for nerve agent simulant detection.

Organophosphorus nerve agents are toxic compounds that disrupt neuromuscular transmission by inhibiting the neurotransmitter enzyme, acetylcholinesterase, leading to rapid death. A hybrid composite was synthesized using a hydrothermal process for the early detection of dimethyl methyl phosphonate (DMMP), a simulant of the G-series nerve agent, sarin. Quartz crystal microbalance (QCM) and surface acoustic wave (SAW) sensors were used as detectors. Nitrogen-doped multiwalled carbon nanotubes (N-MWCNTs), cobalt oxide (Co3O4), and N-MWCNT@Co3O4 were compared to detect DMMP concentrations of 25-150 ppm. At 25 ppm, the differential frequencies (Δf) of the N-MWCNT, Co3O4, and N-MWCNT@Co3O4 sensors were 5.8, 2.3, and 99.5 Hz, respectively. The selectivity results revealed a preference for the DMMP rather than potential interference. The coefficients of determination (R2) of the N-MWCNT, Co3O4, and N-MWCNT@Co3O4 sensors for detecting 25-150 ppm DMMP were 0.983, 0.986, and 0.999, respectively. The response times of the N-MWCNT, Co3O4, and N-MWCNT@Co3O4 sensors for detecting 100 ppm DMMP were 25, 27, and 34 s, respectively, while the corresponding recovery times were 85, 105, and 181 s. The repeatability results revealed the reversible adsorption and desorption phenomena for the fixed DMMP concentration of 100 ppm. These unique findings show that synthesized materials can be used to detect organophosphorus nerve agents.

Stabilizing the Catalyst Layer for Durable and High Performance Alkaline Membrane Fuel Cells and Water Electrolyzers.

Anion exchange membrane (AEM) fuel cells (AEMFCs) and water electrolyzers (AEMWEs) suffer from insufficient performance and durability compared with commercialized energy conversion systems. Great efforts have been devoted to designing high-quality AEMs and catalysts. However, the significance of the stability of the catalyst layer has been largely disregarded. Here, an in situ cross-linking strategy was developed to promote the interactions within the catalyst layer and the interactions between catalyst layer and AEM. The adhesion strength of the catalyst layer after cross-linking was improved 7 times compared with the uncross-linked catalyst layer due to the formation of covalent bonds between the catalyst layer and AEM. The AEMFC can be operated under 0.6 A cm-2 for 1000 h with a voltage decay rate of 20 µV h-1. The related AEMWE achieved an unprecedented current density of 15.17 A cm-2 at 2.0 V and was operated at 0.5, 1.0, and 1.5 A cm-2 for 1000 h.

Defect Passivation of 2D Semiconductors by Fixating Chemisorbed Oxygen Molecules via h-BN Encapsulations.

Hexagonal boron nitride (h-BN) is a key ingredient for various 2D van der Waals heterostructure devices, but the exact role of h-BN encapsulation in relation to the internal defects of 2D semiconductors remains unclear. Here, it is reported that h-BN encapsulation greatly removes the defect-related gap states by stabilizing the chemisorbed oxygen molecules onto the defects of monolayer WS2 crystals. Electron energy loss spectroscopy (EELS) combined with theoretical analysis clearly confirms that the oxygen molecules are chemisorbed onto the defects of WS2 crystals and are fixated by h-BN encapsulation, with excluding a possibility of oxygen molecules trapped in bubbles or wrinkles formed at the interface between WS2 and h-BN. Optical spectroscopic studies show that h-BN encapsulation prevents the desorption of oxygen molecules over various excitation and ambient conditions, resulting in a greatly lowered and stabilized free electron density in monolayer WS2 crystals. This suppresses the exciton annihilation processes by two orders of magnitude compared to that of bare WS2. Furthermore, the valley polarization becomes robust against the various excitation and ambient conditions in the h-BN encapsulated WS2 crystals.

Hypointense signal lesion on susceptibility-weighted imaging as a potential indicator of vertebral artery dissection in medullary infarction.

Vertebral artery dissection (VAD) is often associated with medullary infarction; however, an underlying cause may be underestimated. This study aimed to assess the diagnostic potential of hypointense signal lesions along the arterial pathways using susceptibility-weighted imaging (SWI) as a feasible indicator of VAD in medullary infarction. A retrospective analysis was conducted using clinical data, brain magnetic resonance imaging, and angiography records of 79 patients diagnosed with medullary infarction between January 2014 and December 2021. Patients were categorized into an angiography-confirmed dissection group and a non-dissection group based on imaging findings. A new possible dissection group was identified using SWI, including cases with hypointense signals along the arteries without calcification or cardioembolism. We compared the clinical characteristics of the two groups before and after the addition of the hypointense signal as a marker of VAD. The angiography-confirmed dissection group included 12 patients (15%). Among patients lacking angiographic VAD evidence, 14 subjects displayed hypointense signals on SWI: nine patients along the vertebral artery and five subjects at the posterior inferior cerebellar artery without calcification or cardioembolism. The newly classified dissection group was younger, had a lower prevalence of diabetes mellitus and stroke history, and revealed increased headaches compared to the non-dissection group. Hypointense signal detection on SWI in medullary infarctions shows promise as a diagnostic indicator for VAD. Suspicion of VAD is needed when the hypointense signal on SWI is noted, and considering different treatment strategies with angiographic follow-up will be helpful.

Light-Responsive Shape- and Color-Changing Block Copolymer Particles with Fast Switching Speed.

Polymer particles capable of dynamic shape changes in response to light have received substantial attention in the development of intelligent multifunctional materials. In this study, we develop a light-responsive block copolymer (BCP) particle system that exhibits fast and reversible shape and color transitions. The key molecular design is the integration of spiropyran photoacid (SPPA) molecules into the BCP particle system, which enables fast and dynamic transformations of polystyrene-b-poly(4-vinylpyridine) (PS-b-P4VP) particles in response to light. The SPPA photoisomerization, induced by 420 nm light irradiation, lowers the pH of the aqueous surroundings from 5.5 to 3.3. The protonated P4VP block substantially increases in domain size from 14 to 39 nm, resulting in significant elongation of the BCP particles (i.e., an increase in the aspect ratio (AR) of the particles from 1.8 to 3.4). Moreover, SPPA adsorbed onto the P4VP surface induces significant changes in the luminescent properties of the BCP particles via photoisomerization of SPPA. Notably, the BCP particles undergo fast, dynamic shape and color transitions within a period of 10 min, maintaining high reversibility over multiple light exposures. Functional dyes are selectively incorporated into different domains of the light-responsive BCP particles to achieve different ranges of color responses. Thus, this study showcases a light-responsive hydrogel display capable of reversible and multicolor photopatterning.

Intracranial-intracranial bypass strategies for the treatment of complex intracranial aneurysms: anatomical characteristics and surgical intervention.

OBJECTIVE: The effectiveness of revascularization for complex aneurysms is well-established. This study aimed to describe the technical characteristics and clinical efficacy of intracranial-to-intracranial (IC-IC) bypass for the treatment of complex intracranial aneurysms. METHODS: We retrospectively reviewed all patients with aneurysms who underwent a preplanned combination of surgical or endovascular treatment and IC-IC bypass at our institution between January 2006 and September 2023. IC-IC bypass techniques included four strategies: type A (end-to-end reanastomosis), type B (end-to-side reimplantation), type C (in situ side-to-side anastomosis), and type D (IC-IC bypass with a graft vessel). RESULTS: During the study period, ten patients with aneurysms each underwent IC-IC bypass surgery. Aneurysms were located in the middle cerebral artery (60.0%), anterior temporal artery (10.0%), anterior cerebral artery (20.0%), and vertebral artery (10.0%). There were three saccular aneurysms (30.0%), two fusiform aneurysms (20.0%), one dissecting aneurysm (10.0%), and four pseudoaneurysms (40.0%). We performed the type A strategy on five patients (50.0%), type B on one (10.0%), type C on one (10.0%), and type D on three (30.0%). During a mean period of 68.3 months, good clinical outcomes (modified Rankin Scale score, 0-2) were observed in all patients. Follow-up angiography demonstrated complete aneurysmal obliteration in all patients and good bypass patency in nine of ten patients (90.0%). CONCLUSION: The treatment of complex aneurysms remains a challenge with conventional surgical or endovascular treatments. IC-IC bypass surgery is a useful technique, associated with favorable clinical outcomes, for treating complex aneurysms.

Efficacy and safety of digital therapeutic application of Sleep Index-Based Treatment for Insomnia (dSIBT-I): a pilot study.

The aim of this study was to evaluate the safety and efficacy of digital therapeutic application of Sleep Index-Based Treatment for Insomnia (dSIBT-I) and compare them with those of digital application of Cognitive Behavioural Therapy for Insomnia (dCBT-I). This randomised prospective pilot study was conducted at the Asan Medical Center. A total of 50 patients with insomnia were recruited between December 2022 and January 2023 and randomly allocated to the dSIBT-I or dCBT-I group. The study was carried out for one month. The primary outcome was the significant reduction in Insomnia Severity Index score at Week 4 compared to baseline, while the secondary outcome was proportion of participants whose Insomnia Severity Index scores were reduced to <15 at Week 4. We performed linear mixed model and generalised estimating equation analyses. Both dSIBT-I and dCBT-I groups showed significant improvements in Insomnia Severity Index scores at Week 4. There was no significant difference between two groups in terms of Insomnia Severity Index scores at Week 4 (group × time effect, F = 1.07, p = 0.382) and proportion of participants whose Insomnia Severity Index scores were reduced to <15 at Week 4 (group × time effects, F = 1.80, p = 0.615). However, at Week 2, the dSIBT-I group showed better results than the dCBT-I group in terms of both Insomnia Severity Index scores (p = 0.044) and proportion of participants whose Insomnia Severity Index scores were reduced to <15 (82.6% vs. 48.0%, p = 0.017). No treatment-emergent adverse events were reported in either group. The dSIBT-I is a safe and effective therapy for insomnia, with rapid treatment effects.

High Free Volume Polyelectrolytes for Anion Exchange Membrane Water Electrolyzers with a Current Density of 13.39 A cm-2 and a Durability of 1000 h.

The rational design of the current anion exchange polyelectrolytes (AEPs) is challenging to meet the requirements of both high performance and durability in anion exchange membrane water electrolyzers (AEMWEs). Herein, highly-rigid-twisted spirobisindane monomer is incorporated in poly(aryl-co-aryl piperidinium) backbone to construct continuous ionic channels and to maintain dimensional stability as promising materials for AEPs. The morphologies, physical, and electrochemical properties of the AEPs are investigated based on experimental data and molecular dynamics simulations. The present AEPs possess high free volumes, excellent dimensional stability, hydroxide conductivity (208.1 mS cm-1 at 80 °C), and mechanical properties. The AEMWE of the present AEPs achieves a new current density record of 13.39 and 10.7 A cm-2 at 80 °C by applying IrO2 and nonprecious anode catalyst, respectively, along with outstanding in situ durability under 1 A cm-2 for 1000 h with a low voltage decay rate of 53 µV h-1 . Moreover, the AEPs can be applied in fuel cells and reach a power density of 2.02 W cm-2 at 80 °C under fully humidified conditions, and 1.65 W cm-2 at 100 °C, 30% relative humidity. This study provides insights into the design of high-performance AEPs for energy conversion devices.

Exploring the Cathode Active Materials for Sulfide-Based All-Solid-State Lithium Batteries with High Energy Density.

All-solid-state lithium batteries (ASSLBs) are considered promising alternatives to current lithium-ion batteries that employ liquid electrolytes due to their high energy density and enhanced safety. Among various types of solid electrolytes, sulfide-based electrolytes are being actively studied, because they exhibit high ionic conductivity and high ductility, which enable good interfacial contacts in solid electrolytes without sintering at high temperatures. To improve the energy density of the sulfide-based ASSLBs, it is essential to increase the loading of active material in the composite cathode. In this study, the Ni-rich LiNix Coy Mn1-x-y O2 (NCM) materials are explored with different Ni content, particle size, and crystalline form to probe suitable cathode active materials for high-performance ASSLBs with high energy density. The results reveal that single-crystalline LiNi0.82 Co0.10 Mn0.08 O2 material with a small particle size exhibits the best cycling performance in the ASSLB assembled with a high mass loaded cathode (active mass loading: 26 mg cm-2 , areal capacity: 5.0 mAh cm-2 ) in terms of discharge capacity, capacity retention, and rate capability.

Impact of channel nanostructures of porous carbon particles on their catalytic performance.

Mesoporous carbon particles have great potential due to their unique structural properties as support materials for catalytic applications. Particle shapes and channel nanostructures of mesoporous carbon particles can determine the reactant/product transport efficiency. However, the role of the channel nanostructure in the catalytic reaction has not been much explored. Herein, we introduce a facile method to fabricate a series of porous carbon particles (PCPs) with controlled channel exposure on the carbon surface and investigate the impact of the channel nanostructure of the PCPs on the catalytic activity. By employing a membrane emulsification method with a controlled solvent evaporation rate, we fabricate block copolymer (BCP) particles with uniform size and regulated degrees of cylindrical channel exposed to the particle surface. Followed by the carbonization of the BCP particles, a low amount (1.3 wt%) of Pt is incorporated into the PCP series to investigate the impact of channel nanostructures on the catalytic oxidation reaction of o-phenylenediamine (OPD). Specifically, PCP featuring highly open channel nanostructures shows a high reaction rate constant of 0.154 mM-1 s-1 for OPD oxidation, showing 5.5 times higher catalytic activity than those of closed channel nanostructures (0.028 mM-1 s-1). This study provides a deeper understanding of the impact of channel nanostructure within mesoporous carbon particles on catalytic activity.

Preclinical Study on Biodistribution of Mesenchymal Stem Cells after Local Transplantation into the Brain.

Therapeutic efficacy of mesenchymal stem cells (MSCs) is determined by biodistribution and engraftment in vivo. Compared to intravenous infusion, biodistribution of locally transplanted MSCs are partially understood. Here, we performed a pharmacokinetics (PK) study of MSCs after local transplantation. We grafted human MSCs into the brains of immune-compromised nude mice. Then we extracted genomic DNA from brains, lungs, and livers after transplantation over a month. Using quantitative polymerase chain reaction with human Alu-specific primers, we analyzed biodistribution of the transplanted cells. To evaluate the role of residual immune response in the brain, MSCs expressing a cytosine deaminase (MSCs/CD) were used to ablate resident immune cells at the injection site. The majority of the Alu signals mostly remained at the injection site and decreased over a week, finally becoming undetectable after one month. Negligible signals were transiently detected in the lung and liver during the first week. Suppression of Iba1-positive microglia in the vicinity of the injection site using MSCs/CD prolonged the presence of the Alu signals. After local transplantation in xenograft animal models, human MSCs remain predominantly near the injection site for limited time without disseminating to other organs. Transplantation of human MSCs can locally elicit an immune response in immune compromised animals, and suppressing resident immune cells can prolong the presence of transplanted cells. Our study provides valuable insights into the in vivo fate of locally transplanted stem cells and a local delivery is effective to achieve desired dosages for neurological diseases.

THOC2 expression and its impact on 5-fluorouracil resistance in glioblastoma multiforme.

Glioblastoma multiforme (GBM) is a highly aggressive brain tumor with poor prognosis and limited treatment options. While 5-fluorouracil (5-FU) has not been widely employed in GBM therapy, emerging research indicates its potential for effectiveness when combined with advanced drug delivery systems to improve its transport to brain tumors. This study aims to investigate the role of THOC2 expression in 5-FU resistance in GBM cell lines. We evaluated diverse GBM cell lines and primary glioma cells for 5-FU sensitivity, cell doubling times, and gene expression. We observed a significant correlation between THOC2 expression and 5-FU resistance. To further investigate this correlation, we selected five GBM cell lines and developed 5-FU resistant GBM cells, including T98FR cells, through long-term 5-FU treatment. In 5-FU challenged cells, THOC2 expression was upregulated, with the highest increase in T98FR cells. THOC2 knockdown in T98FR cells reduced 5-FU IC50 values, confirming its role in 5-FU resistance. In a mouse xenograft model, THOC2 knockdown attenuated tumor growth and extended survival duration after 5-FU treatment. RNA sequencing identified differentially expressed genes and alternative splicing variants in T98FR/shTHOC2 cells. THOC2 knockdown altered Bcl-x splicing, increasing pro-apoptotic Bcl-xS expression, and impaired cell adhesion and migration by reducing L1CAM expression. These results suggest that THOC2 plays a crucial role in 5-FU resistance in GBM and that targeting THOC2 expression could be a potential therapeutic strategy for improving the efficacy of 5-FU-based combination therapies in GBM patients.

Enhanced antitumor efficacy of mesenchymal stem cells expressing cytosine deaminase and 5-fluorocytosine combined with α-galactosylceramide in a colon cancer model.

Cancer immunotherapy has emerged as a promising approach for treating various malignancies. In this study, we investigated the combined therapeutic effects of mesenchymal stem cells expressing cytosine deaminase (MSC/CD) and 5-fluorocytosine (5-FC) with α-galactosylceramide (α-GalCer) in a colon cancer model. Our findings demonstrated that the combination of MSC/CD, 5-FC, and α-GalCer resulted in enhanced antitumor activity compared to the individual treatments. This was evidenced by increased infiltration of immune cells, such as natural killer T (NKT) cells, antigen-presenting cells (APCs), T cells, and natural killer (NK) cells, in the tumor microenvironment, as well as elevated expression of proinflammatory cytokines and chemokines. Furthermore, we observed no significant hepatotoxicity following the combined treatment. Our study highlights the potential therapeutic benefits of combining MSC/CD, 5-FC, and α-GalCer for colon cancer treatment and contributes valuable insights to the field of cancer immunotherapy. Future research should focus on elucidating the underlying mechanisms and exploring the applicability of these findings to other cancer types and immunotherapy strategies.

Assessment of Risks and Benefits of Using Antibiotics Resistance Genes in Mesenchymal Stem Cell-Based Ex-Vivo Therapy.

Recently, ex-vivo gene therapy has emerged as a promising approach to enhance the therapeutic potential of mesenchymal stem cells (MSCs) by introducing functional genes in vitro. Here, we explored the need of using selection markers to increase the gene delivery efficiency and evaluated the potential risks associated with their use in the manufacturing process. We used MSCs/CD that carry the cytosine deaminase gene (CD) as a therapeutic gene and a puromycin resistance gene (PuroR) as a selection marker. We evaluated the correlation between the therapeutic efficacy and the purity of therapeutic MSCs/CD by examining their anti-cancer effect on co-cultured U87/GFP cells. To simulate in vivo horizontal transfer of the PuroR gene in vivo, we generated a puromycin-resistant E. coli (E. coli/PuroR) by introducing the PuroR gene and assessed its responsiveness to various antibiotics. We found that the anti-cancer effect of MSCs/CD was directly proportional to their purity, suggesting the crucial role of the PuroR gene in eliminating impure unmodified MSCs and enhancing the purity of MSCs/CD during the manufacturing process. Additionally, we found that clinically available antibiotics were effective in inhibiting the growth of hypothetical microorganism, E. coli/PuroR. In summary, our study highlights the potential benefits of using the PuroR gene as a selection marker to enhance the purity and efficacy of therapeutic cells in MSC-based gene therapy. Furthermore, our study suggests that the potential risk of horizontal transfer of antibiotics resistance genes in vivo can be effectively managed by clinically available antibiotics.

Structure-Controlled Carbon Hosts for Dendrite-Free Aqueous Zinc Batteries.

The surging demand for environmental-friendly and safe electrochemical energy storage systems has driven the development of aqueous zinc (Zn)-ion batteries (ZIBs). However, metallic Zn anodes suffer from severe dendrite growth and large volume change, resulting in a limited lifetime for aqueous ZIB applications. Here, it is shown that 3D mesoporous carbon (MC) with controlled carbon and defect configurations can function as a highly reversible and dendrite-free Zn host, enabling the stable operation of aqueous ZIBs. The MC host has a structure-controlled architecture that contains optimal sp2 -carbon and defect sites, which results in an improved initial nucleation energy barrier and promotes uniform Zn deposition. As a consequence, the MC host shows outstanding Zn plating/stripping performance over 1000 cycles at 2 mA cm-2 and over 250 cycles at 6 mA cm-2 in asymmetric cells. Density functional theory calculations further reveal the role of the defective sp2 -carbon surface in Zn adsorption energy. Moreover, a full cell based on Zn@MC900 anode and V2 O5 cathode exhibits remarkable rate performance and cycling stability over 3500 cycles. These results establish a structure-mechanism-performance relationship of the carbon host as a highly reversible Zn anode for the reliable operation of ZIBs.

Tooth-Cutting-Induced Maxillary Malocclusion Exacerbates Cognitive Deficit in a Mouse Model of Vascular Dementia.

Treatments to restore the balance of the temporomandibular joint (TMJ) are performed in the field of complementary and alternative medicine; however, evidence supporting this approach remains weak. Therefore, this study attempted to establish such evidence. Bilateral common carotid artery stenosis (BCAS) operation, which is commonly used for the establishment of a mouse model of vascular dementia, was performed, followed by tooth cutting (TEX) for maxillary malocclusion to promote the imbalance of the TMJ. Behavioural changes, changes in nerve cells and changes in gene expression were assessed in these mice. The TEX-induced imbalance of the TMJ caused a more severe cognitive deficit in mice with BCAS, as indicated by behavioural changes in the Y-maze test and novel object recognition test. Moreover, inflammatory responses were induced via astrocyte activation in the hippocampal region of the brain, and the proteins involved in inflammatory responses were found to be involved in these changes. These results indirectly show that therapies that restore the balance of the TMJ can be effectively used for the management of cognitive-deficit-related brain diseases associated with inflammation.

Role of Bicontinuous Structure in Elastomeric Electrolytes for High-Energy Solid-State Lithium-Metal Batteries.

Solid-state lithium (Li)-metal batteries (LMBs) are garnering attention as a next-generation battery technology that can surpass conventional Li-ion batteries in terms of energy density and operational safety under the condition that the issue of uncontrolled Li dendrite is resolved. In this study, various plastic crystal-embedded elastomer electrolytes (PCEEs) are investigated with different phase-separated structures, prepared by systematically adjusting the volume ratio of the phases, to elucidate the structure-property-electrochemical performance relationship of the PCEE in the LMBs. At an optimal volume ratio of elastomer phase to plastic-crystal phase (i.e., 1:1), bicontinuous-structured PCEE, consisting of efficient ion-conducting, plastic-crystal pathways with long-range connectivity within a crosslinked elastomer matrix, exhibits exceptionally high ionic conductivity (≈10-3 S cm-1 ) at 20 °C and excellent mechanical resilience (elongation at break ≈ 300%). A full cell featuring this optimized PCEE, a 35 µm thick Li anode, and a high loading LiNi0.83 Mn0.06 Co0.11 O2 (NMC-83) cathode delivers a high energy density of 437 Wh kganode+cathode+electrolyte -1 . The established structure-property-electrochemical performance relationship of the PCEE for solid-state LMBs is expected to inform the development of the elastomeric electrolytes for various electrochemical energy systems.

Biocompatible Potato-Starch Electrolyte-Based Coplanar Gate-Type Artificial Synaptic Transistors on Paper Substrates.

In this study, we propose the use of artificial synaptic transistors with coplanar-gate structures fabricated on paper substrates comprising biocompatible and low-cost potato-starch electrolyte and indium-gallium-zinc oxide (IGZO) channels. The electrical double layer (EDL) gating effect of potato-starch electrolytes enabled the emulation of biological synaptic plasticity. Frequency dependence measurements of capacitance using a metal-insulator-metal capacitor configuration showed a 1.27 µF/cm2 at a frequency of 10 Hz. Therefore, strong capacitive coupling was confirmed within the potato-starch electrolyte/IGZO channel interface owing to EDL formation because of internal proton migration. An electrical characteristics evaluation of the potato-starch EDL transistors through transfer and output curve resulted in counterclockwise hysteresis caused by proton migration in the electrolyte; the hysteresis window linearly increased with maximum gate voltage. A synaptic functionality evaluation with single-spike excitatory post-synaptic current (EPSC), paired-pulse facilitation (PPF), and multi-spike EPSC resulted in mimicking short-term synaptic plasticity and signal transmission in the biological neural network. Further, channel conductance modulation by repetitive presynaptic stimuli, comprising potentiation and depression pulses, enabled stable modulation of synaptic weights, thereby validating the long-term plasticity. Finally, recognition simulations on the Modified National Institute of Standards and Technology (MNIST) handwritten digit database yielded a 92% recognition rate, thereby demonstrating the applicability of the proposed synaptic device to the neuromorphic system.

Synthesis and Characterization of MnO2@Cellulose and Polypyrrole-Decorated MnO2@Cellulose for the Detection of Chemical Warfare Agent Simulant.

Chemical warfare agents (CWAs) have been threatening human civilization and its existence because of their rapid response, toxic, and irreversible nature. The hybrid nanostructured composites were synthesized by the hydrothermal process to detect the dimethyl methyl phosphonate (DMMP), a simulant of G-series nerve agents, especially sarin. Cellulose (CE), manganese oxide cellulose (MnO2@CE), and MnO2@CE/polypyrrole (PPy) exhibited a frequency shift of 0.4, 4.8, and 8.9 Hz, respectively, for a DMMP concentration of 25 ppm in the quartz crystal microbalance (QCM). In surface acoustic wave (SAW) sensor, they exhibited 187 Hz, 276 Hz, and 78 Hz, respectively. A comparison between CE, MnO2@CE, and MnO2@CE/PPy demonstrated that MnO2@CE/PPy possesses excellent linearity with a coefficient of determination (COD or R2) of 0.992 and 0.9547 in the QCM and SAW sensor. The hybrid composite materials showed a reversible adsorption and desorption phenomenon in the reproducibility test. The response and recovery times indicated that MnO2@CE/PPy showed the shortest response (~23 s) and recovery times (~42 s) in the case of the QCM sensor. Hence, the pristine CE and its nanostructured composites were compared to analyze the sensing performance based on sensitivity, selectivity, linearity, reproducibility, and response and recovery times to detect the simulant of nerve agents.