ABSTRACT
BACKGROUND: The elaboration of biocompatible nerve guide conduits (NGCs) has been studied in recent years as a treatment for total nerve rupture lesions (axonotmesis). Different natural polymers have been used in these studies, including cellulose associated with soy protein. The purpose of this report was to describe manufacturing NGCs suitable for nerve regeneration using the method of dip coating and evaporation of solvent with cellulose acetate (CA) functionalized with soy protein acid hydrolysate (SPAH). METHODS: The manufacturing method and bacterial control precautions for the CA/SPAH NGCs were described. The structure of the NGCs was analyzed under a scanning electron microscope (SEM); porosity was analyzed with a degassing method using a porosimeter. Schwann cell (SCL 4.1/F7) biocompatibility of cell-seeded nerve guide conduits was evaluated with the MTT assay. RESULTS: The method employed allowed an easy elaboration and customization of NGCs, free of bacteria, with pores in the internal surface, and the uniform wall thickness allowed manipulation, which showed flexibility; additionally, the sample was suturable. The NGCs showed initial biocompatibility with Schwann cells, revealing cells adhered to the NGC structure after 5 days. CONCLUSIONS: The fabricated CA/SPAH NGCs showed adequate features to be used for peripheral nerve regeneration studies. Future reports are necessary to discuss the ideal concentration of CA and SPAH and the mechanical and physicochemical properties of this biomaterial.
ABSTRACT
The placement of a polymeric electrospun scaffold is among the most promising strategies to improve nerve regeneration after critical neurotmesis. It is of great interest to investigate the effect of these structures on Schwann cells (SCs), as these cells lead nerve regeneration and functional recovery. The aim of this study was to assess SC viability and morphology when cultured on polyhydroxybutyrate (PHB) electrospun scaffolds with varied microfiber thicknesses and pore sizes. Six electrospun scaffolds were obtained using different PHB solutions and electrospinning parameters. All the scaffolds were morphologically characterized in terms of fiber thickness, pore size, and overall appearance by analyzing their SEM images. SCs seeded onto the scaffolds were analyzed in terms of viability and morphology throughout the culture period through MTT assay and SEM imaging. The SCs were cultured on three scaffolds with homogeneous smooth fibers (fiber thicknesses: 2.4 µm, 3.1 µm, and 4.3 µm; pore sizes: 16.7 µm, 22.4 µm, and 27.8 µm). SC infiltration and adhesion resulted in the formation of a three-dimensional network composed of intertwined fibers and cells. The SCs attached to the scaffolds maintained their characteristic shape and size throughout the culture period. Bigger pores and thicker fibers resulted in higher SC viability.
ABSTRACT
The present study analyzed the effects of low-level laser therapy (LLLT) and the purified natural latex protein (Hevea brasiliensis, F1 protein) on the morpho-function of sciatic nerve crush injuries in rats. One-hundred and eight male Wistar rats were randomly allocated to six groups (n = 18): 1. Control; 2. Exposed (nerve exposed); 3. Injury (injured nerve without treatment); 4. LLLT (injured nerve irradiated with LLLT (15 J/cm2, 780 nm)); 5. F1 (injured nerve treated with F1 protein (0.1%)); and 6. LLLT + F1 (injured nerve treated with LLLT and F1). On the 1st, 7th, 14th, and 56th days after injury, a functional sensory analysis of mechanical allodynia and mechanical hyperalgesia and a motor analysis of grip strength and gait were performed. After 3, 15, and 57 days, the animals were euthanized for morphometric/ultrastructural analyses. The treatments applied revealed improvements in morphometric/ultrastructural parameters compared to the injured group. Sensory analyses suggested that the improvements observed were associated with time progression and not influenced by the treatments. Motor analyses revealed significant improvements in grip strength from the 7th day in the LLLT group and in gait from the 56th day in all treated groups. We concluded that even though the morphological analyses showed improvements with the treatments, they did not influence sensory recovery, and LLLT improved motor recovery.
ABSTRACT
Mandibular movement recording is relevant for the planning and evaluation of mandibular function. These movements can include mandibular border movements (MBM) or mastication. Our objective was to characterize the kinematics of MBM and mastication among skeletal classes I, II, and III in the three spatial planes. A descriptive cross-sectional study was conducted with 30 participants. Instructions were provided on how to form Posselt's envelope and to perform masticatory. After data processing, we obtained numerical values for the areas, trajectories, and ranges of MBM that formed Posselt's envelope and the values for speed, masticatory frequency, and the areas of each masticatory cycle. Significant differences were found in the area of Posselt's envelope in the horizontal plane between skeletal classes I and III and in the range of right laterality between skeletal classes II and III. Mastication showed significant differences in the area of the masticatory cycles in the horizontal plane between classes I and III and between classes II and III. In conclusion, there were differences in MBM and mastication between skeletal classes III and I in the horizontal plane. This study supports the need to establish normal values for mandibular kinematics in skeletal class III.
ABSTRACT
Temporomandibular disorders (TMDs) are a group of pathologies that affect the temporomandibular joint and its related structures, producing intracapsular and muscular pathologies. The aim of this study is to describe, by electromagnetic articulography (EMA) and simultaneous electromyography (sEMG), the mandibular postural position and mouth opening in healthy patients and with articular and/or muscular pathology. MATERIALS AND METHODS: A pilot study was conducted with a sample of sixteen participants aged 18 years or older who attended the TMDs and Orofacial Pain Polyclinic of the University of La Frontera due to TMDs. The physiological inoculation space was evaluated from the mandibular postural position (MPP) with swallowing command and without command, in both healthy patients and patients with articular, muscular, and mixed TMDs, measured simultaneously with EMA and sEMG. An angular measurement of the oral opening was also performed with the data obtained. RESULTS: The physiological inoculation space was obtained from the determination of the MPP through the procedures with swallowing command and without command, and different mouth opening degrees were evaluated. CONCLUSIONS: Simultaneous position and sEMG records can be produced from EMA, and different characterization variables such as the vertical distance, Euclidean distance, and angle can be obtained.
ABSTRACT
The mouth opening is an important indication of the functionality of the temporomandibular joint (TMJ). Mouth opening is usually evaluated by asking the patient to open their mouth as wide as possible and measuring the distance between the edges of the frontal incisors with a ruler or caliper. With the advancement of technology, new techniques have been proposed to record mandibular movement. The aim of this work is to present a novel technique based on 3D electromagnetic articulography and data postprocessing to analyze the mouth opening considering distances, trajectories, and angles. A maxilla-mandible phantom was used to simulate the mouth opening movement and fixed position mouth opening. This was recorded using the AG501 3D EMA (Carstens Medizinelektronik GmbH, Bovenden, Germany). The collected data was processed using Matlab (Mathworks, Natick, MA, USA). Fix and mobile mouth opening of 1, 2, 3 and 4 cm were simulated. It was possible to evaluate the mandibular opening through the vertical distance, the Euclidean distance, the trajectory, and the opening angle. All these values were calculated and the results were consistent with expectations. The trajectory was the highest value obtained while the vertical distance was the lowest. The angle increased as the mouth opening increased. This new technique opens up new possibilities in future research since oral opening can be analyzed using multiple variables without the need to use different devices or depending on the researcher's experience. This will make it possible to establish which parameter presents significant differences between groups of patients or between patients who have undergone some treatment.
ABSTRACT
In the last two decades, artificial scaffolds for nerve regeneration have been produced using a variety of polymers. Polyhydroxybutyrate (PHB) is a natural polyester that can be easily processed and offer several advantages; hence, the purpose of this review is to provide a better understanding of the efficacy of therapeutic approaches involving PHB scaffolds in promoting peripheral nerve regeneration following nerve dissection in animal models. A systematic literature review was performed following the "Preferred Reporting Items for Systematic Reviews and Meta-Analyses" (PRISMA) criteria. The revised databases were: Pub-Med/MEDLINE, Web of Science, Science Direct, EMBASE, and SCOPUS. Sixteen studies were included in this review. Different animal models and nerves were studied. Extension of nerve gaps reconnected by PHB scaffolds and the time periods of analysis were varied. The additives included in the scaffolds, if any, were growth factors, neurotrophins, other biopolymers, and neural progenitor cells. The analysis of the quality of the studies revealed good quality in general, with some aspects that could be improved. The analysis of the risk of bias revealed several weaknesses in all studies. The use of PHB as a biomaterial to prepare tubular scaffolds for nerve regeneration was shown to be promising. The incorporation of additives appears to be a trend that improves nerve regeneration. One of the main weaknesses of the reviewed articles was the lack of standardized experimentation on animals. It is recommended to follow the currently available guidelines to improve the design, avoid the risk of bias, maximize the quality of studies, and enhance translationality.
ABSTRACT
Introduction: Chewing is a learned orofacial function, important in the nutrition process of most mammals. It has been described that it can vary according to the characteristics of the individuals and the characteristics of the food. The aim of this study was to compare the kinematic characteristics of mastication in subjects with different body mass index (BMI), including foods of different hardness in the analysis. Material and Methods: A cross-sectional observational study was conducted. The mastication of 3.7 g of peanut (soft food) and 3.7 g of carrot (hard food) was compared among three study groups formed according to BMI: normal weight (BMI 18.5-24.9), overweight (BMI 25-29.9) and obese (BMI ≥30); each with 7 participants. The kinematics of the masticatory movement were assessed with a 3D Electromagnetic Articulograph, the characteristics analyzed were number of masticatory cycles, masticatory frequency, speed and area of the cycles. Results: No significant differences were noted among the study groups for the number of masticatory cycles, frequency or speed in the two foods studied. It was observed that when chewing carrot, the horizontal area of the masticatory cycles was significantly larger in the obese than in the overweight group. However, when chewing peanuts, this parameter did not present significant differences among the different groups. A comparison of the characteristics of mastication of the two foods revealed that the carrot chewing presented a significantly greater masticatory frequency and speed than the peanut chewing. Conclusion: This study demonstrated that food hardness influences the kinematic characteristics of mastication more than BMI, noting that hard foods are masticated faster and more frequently than soft foods and that masticatory frequency tends to increase with BMI.
Introduction: Chewing is a learned orofacial function, important in the nutrition process of most mammals. It has been described that it can vary according to the characteristics of the individuals and the characteristics of the food. The aim of this study was to compare the kinematic cha-racteristics of mastication in subjects with different body mass index (BMI), including foods of different hardness in the analysis. Material and Methods: A cross-sectional observational study was con- ducted. The mastication of 3.7 g of peanut (soft food) and 3.7 g of carrot (hard food) was compared among three study groups formed according to BMI: normal weight (BMI 18.5-24.9), overweight (BMI 25-29.9) and obese (BMI ?30); each with 7 participants. The kinematics of the masticatory movement were assessed with a 3D Electromagnetic Articulograph, the characteristics analyzed were number of masticatory cycles, masticatory frequency, speed and area of the cycles. Results: No significant differences were noted among the study groups for the number of masticatory cycles, frequency or speed in the two foods studied. It was observed that when chewing carrot, the horizontal area of the masticatory cycles was significantly larger in the obese than in the overweight group. However, when chewing peanuts, this parameter did not present significant differences among the different groups. A comparison of the characteristics of mastication of the two foods revealed that the carrot chewing presented a significantly greater masticatory frequency and speed than the peanut chewing. Conclusion: This study demonstrated that food hardness influences the kinematic characteristics of mastication more than BMI, noting that hard foods are masticated faster and more frequently than soft foods and that masticatory frequency tends to increase with BMI.
Subject(s)
Humans , Male , Female , Adult , Young Adult , Body Weight/physiology , Body Mass Index , Mastication/physiology , Biomechanical Phenomena , Overweight/physiopathology , Food , Obesity/physiopathologyABSTRACT
Cellular behavior in nerve regeneration is affected by the architecture of the polymeric nerve guide conduits (NGCs); therefore, design features of polymeric NGCs are critical for neural tissue engineering. Hence, the purpose of this scoping review is to summarize the adequate quantitative/morphometric parameters of the characteristics of NGC that provide a supportive environment for nerve regeneration, enhancing the understanding of a previous study. 394 studies were found, of which 29 studies were selected. The selected studies revealed four morphometric characteristics for promoting nerve regeneration: wall thickness, fiber size, pore size, and porosity. An NGC with a wall thickness between 250-400 µm and porosity of 60-80%, with a small pore on the inner surface and a large pore on the outer surface, significantly favored nerve regeneration; resulting in an increase in nutrient permeability, retention of neurotrophic factors, and optimal mechanical properties. On the other hand, the superiority of electrospun fibers is described; however, the size of the fiber is controversial in the literature, obtaining optimal results in the range of 300 nm to 30 µm. The incorporation of these optimal morphometric characteristics will encourage nerve regeneration and help reduce the number of experimental studies as it will provide the initial morphometric parameters for the preparation of an NGC.
ABSTRACT
Electrospun scaffolds can imitate the hierarchical structures present in the extracellular matrix, representing one of the main concerns of modern tissue engineering. They are characterized in order to evaluate their capability to support cells or to provide guidelines for reproducibility. The issues with widely used methods for morphological characterization are discussed in order to provide insight into a desirable methodology for electrospun scaffold characterization. Reported methods include imaging and physical measurements. Characterization methods harbor inherent limitations and benefits, and these are discussed and presented in a comprehensive selection matrix to provide researchers with the adequate tools and insights required to characterize their electrospun scaffolds. It is shown that imaging methods present the most benefits, with drawbacks being limited to required costs and expertise. By making use of more appropriate characterization, researchers will avoid measurements that do not represent their scaffolds and perhaps might discover that they can extract more characteristics from their scaffold at no further cost.
ABSTRACT
Electrospun scaffolds have a 3D fibrous structure that attempts to imitate the extracellular matrix in order to be able to host cells. It has been reported in the literature that controlling fiber surface topography produces varying results regarding cell-scaffold interactions. This review analyzes the relevant literature concerning in vitro studies to provide a better understanding of the effect that controlling fiber surface topography has on cell-scaffold interactions. A systematic approach following PRISMA, GRADE, PICO, and other standard methodological frameworks for systematic reviews was used. Different topographic interventions and their effects on cell-scaffold interactions were analyzed. Results indicate that nanopores and roughness on fiber surfaces seem to improve proliferation and adhesion of cells. The quality of the evidence is different for each studied cell-scaffold interaction, and for each studied morphological attribute. The evidence points to improvements in cell-scaffold interactions on most morphologically complex fiber surfaces. The discussion includes an in-depth evaluation of the indirectness of the evidence, as well as the potentially involved publication bias. Insights and suggestions about dose-dependency relationship, as well as the effect on particular cell and polymer types, are presented. It is concluded that topographical alterations to the fiber surface should be further studied, since results so far are promising.
ABSTRACT
The "nerve guide conduits" (NGC) used in nerve regeneration must mimic the natural environment for proper cell behavior. OBJECTIVE: To describe the main morphological characteristics of polymeric NGC to promote nerve regeneration. METHODS: A scoping review was performed following the Preferred Reporting Items for Systematic reviews and Meta-Analyses extension for Scoping Reviews (PRISMA-ScR) criteria in the PubMed, Web of Science, Science Direct, and Scientific Electronic Library Online (SciELO) databases. Primary studies that considered/evaluated morphological characteristics of NGC to promote nerve regeneration were included. RESULT: A total of 704 studies were found, of which 52 were selected. The NGC main morphological characteristics found in the literature were: (I) NGC diameter affects the mechanical properties of the scaffold. (II) Wall thickness of NGC determines the exchange of nutrients, molecules, and neurotrophins between the internal and external environment; and influences the mechanical properties and biodegradation, similarly to NGC (III) porosity, (IV) pore size, and (V) pore distribution. The (VI) alignment of the NGC fibers influences the phenotype of cells involved in nerve regeneration. In addition, the (VII) thickness of the polymeric fiber influences neurite extension and orientation. CONCLUSIONS: An NGC should have its diameter adjusted to the nerve with wall thickness, porosity, pore size, and distribution of pores, to favor vascularization, permeability, and exchange of nutrients, and retention of neurotrophic factors, also favoring its mechanical properties and biodegradability.
ABSTRACT
RESUMEN: Diversos estudios reportan que el tipo de alimento influye directamente en los patrones cinemáticos de la masticación. El objetivo de este estudio fue analizar y comparar los ciclos masticatorios de participantes adultos y completamente dentados durante la masticación de alimentos de diferente textura y dureza (maní y zanahoria) utilizando articulografía electromagnética 3D. Se evaluaron 11 participantes sanos (5 hombres; 6 mujeres), de 31,9 ± 5,2 años de edad. Mediante articulografía electromagnética 3D, se registró la masticación de dos alimentos de prueba (maní y zanahoria). Los datos de movimiento mandibular fueron procesados con MATLAB® y obteniendo diferentes parámetros-frecuencia masticatoria en ciclos por segundo, velocidad de descenso y ascenso mandibular, área de las proyecciones de cada ciclo masticatorio en los tres planos del espacio-que fueron comparados según tipo de alimento y género de los participantes. Se encontraron diferencias estadísticamente significativas entre las áreas de los ciclos masticatorios en el plano horizontal según tipo de alimento, siendo mayor para la masticación de zanahoria (P=,003). Así mismo, se detectaron diferencias estadísticamente significativas entre las áreas sagitales de los ciclos entre hombres y mujeres, siendo mayor en mujeres (P=,042). Nuestros resultados concuerdan con otros estudios que afirman que la textura del alimento influye en las características cinemáticas de los ciclos masticatorios.
SUMMARY: Several studies report that the type of food directly influences the kinematic patterns of mastication. The aim of this study was to analyze and compare the chewing cycles of adult and fully dentate participants during the mastication of foods of different texture and hardness (peanuts and carrots) using 3D electromagnetic articulography. Eleven healthy participants (5 men; 6 women), 31.9 ± 5.2 years old, were evaluated. By means of 3D electromagnetic articulography, the mastication of two test foods (peanuts and carrots) was recorded. The data associated to mandibular movement were processed with MATLAB® obtaining different parameters-masticatory frequency in cycles per second, mandibular descent and ascent rate, area of the projections of each masticatory cycle in the three planes of space-which were compared according to type of food and sex of the participants. Statistically significant differences were found between the areas of the masticatory cycles in the horizontal plane according to type of food, being greater for carrots (P=.003). Likewise, statistically significant differences were detected between the sagittal areas of the cycles between men and women, being greater in women (P=.042). Our results agree with other studies that affirm that the texture of the food influences the kinematic characteristics of the masticatory cycles.
Subject(s)
Humans , Male , Female , Adult , Hardness , Mastication/physiology , Biomechanical Phenomena , Imaging, Three-Dimensional , Electromagnetic PhenomenaABSTRACT
BACKGROUND: The envelope of motion is a diagrammatic representation of the mandibular border movements. Classically, those movements are carried out eccentrically; starting from the position of maximal intercuspation, the mandible describes an excursion movement until reaching maximal mouth opening. Reverse movements would describe a different path, but up to now concentric development of mandibular border movements has not been considered. Literature states that beyond mandibular border movements limits, no movement is possible. Therefore, it is of great interest to compare both paths-both envelopes of motion-and define the actual limits of mandibular movement. OBJECTIVE: The aim of this study was to compare the geometric characteristics of mandibular border movements carried out eccentrically and concentrically by healthy subjects. METHODS: Sixteen individuals aged between 18 and 27 years, molar class I and with no temporomandibular disorders, participated in the study. Eccentric and concentric mandibular movements were recorded using a 3D electromagnetic articulograph. Data were processed with computational scripts developed in MATLAB. Maximum mouth opening, trajectories, displacement ranges, polygon areas and chewing cycle area/ mandibular border movements area ratio were analysed. RESULTS: The frontal plane showed significant differences in all the parameters evaluated. Higher values were registered in the concentric area of the border movement envelope (P = .008) and in the trajectories on both sides. Statistical differences were observed in polygon areas (P = .006) in the sagittal plane and right ranges (P = .046) in the horizontal plane. CONCLUSION: Concentric mandibular movements revealed significant differences in three-dimensional trajectories in the frontal plane.
Subject(s)
Mandible , Temporomandibular Joint Disorders , Adolescent , Adult , Humans , Mastication , Movement , Range of Motion, Articular , Young AdultABSTRACT
STATEMENT OF PROBLEM: Asymmetries in mandibular movements (MMs) can be found in patients with some temporomandibular joint disorders, condylar fracture, or after orthognathic or orthodontic surgery. Quality and symmetry of the MMs should be recorded and analyzed. However, methods for this purpose are limited. PURPOSE: The purpose of this clinical study was to determine the symmetry of MMs on asymptomatic participants by applying an innovative technique based on 3D electromagnetic articulography. MATERIAL AND METHODS: The symmetry of MMs was studied in 16 fully dentate participants (8 men and 8 women). A 3D electromagnetic articulograph was used to register MM by placing a sensor on the interincisal midline of the mandible. The border movements related to the frontal (FP), sagittal (SP), and horizontal (HP) polygons of the Posselt envelope of motion were recorded, as well as masticatory movements. Digital data processing was applied to calculate the trajectory and ranges of mandible displacement, area of the right and left sectors of FP and HP, similarity index between the right and left sectors of FP and HP, and orientation of the individualized masticatory cycles. The Shapiro-Wilk statistical test was used to determine the normality of the sample. To compare the characteristics of the right and left sectors of the polygons, a paired-samples t test (normal distributions) and Wilcoxon test for paired samples (non-normal distributions) were applied (α=.05). RESULTS: No statistically significant differences were found between the right and left sectors of the frontal and horizontal polygons in terms of trajectory (FP, P=.408; HP, P=.417), ranges of movement (FP, P=.736; HP, P=.650), areas (FP, P=.736; HP, P=.233), or orientation of the cycles (P=.506). The similarity index between the morphology of the right and left sectors of the polygons was 68 ±12% for the FP and 67 ±11% for the HP. The areas, trajectories, and ranges had similar values, but they had a different morphology on each side of the polygons. Regarding masticatory cycles, a balanced distribution was observed in terms of their orientation. CONCLUSIONS: The technique used allowed the assessment of symmetry of MM on asymptomatic participants. The evaluated parameters maintain similar values at both left and right sides; however, a different morphology of the trajectories and areas was observed.
Subject(s)
Mandible , Temporomandibular Joint Disorders , Electromagnetic Phenomena , Female , Humans , Male , Mandibular Condyle , Movement , Temporomandibular JointABSTRACT
Electromagnetic articulography (EMA) have been mostly employed to study articulatory movements of speech. This technology appears to be very promising for studying mandibular movements within the field of dentistry. However, there are no studies reporting the validity of EMA for such purpose. The aim of this study is to assess accuracy and reliability of Carstens three-dimensional EMA AG501 in order to validate its use for mandibular movement analysis in dentistry. A set of tests was conducted attaching 16 sensors to a rotating rigid structure placed inside the measurement area. Another set of tests were conducted using a mouth anatomical model with human-like articulatory behaviour. A function of the EMA system called "head correction" was applied to normalize the data of every recording. The system reliability was higher at the centre of the measurement area and decreased toward the edges. Dispersion was greater for raw data than for normalized data. Bland-Altman analysis of agreement between the AG501 and a millimetre ruler used to measure the distance between the sensors revealed limits of agreement between 0.5 mm and -0.9 mm. The results suggest that EMA AG501 is valid for three-dimensional analysis of mandibular biomechanics allowing natural movements.
Subject(s)
Electromagnetic Phenomena , Movement , Speech , Biomechanical Phenomena , Humans , Reproducibility of ResultsABSTRACT
Las articulaciones temporomandibulares y la musculatura asociada, permiten que la mandíbula se desplace en los tres planos del espacio (sagital, frontal y horizontal), de esta forma la mandíbula puede realizar movimientos mandibulares complejos. Hace varias décadas que los movimientos bordeantes mandibulares son estudiados, sin embargo, en un principio los estudios se realizaban en dos dimensiones (2D). En la actualidad, gracias al articulógrafo electromagnético (EMA) 3D es posible realizar el estudio de la cinemática mandibular en tres dimensiones (3D). El objetivo del siguiente estudio es analizar los movimientos mandibulares bordeantes (sagital, frontal y horizontal), por medio de la articulografía electromagnética 3D. En el estudio, participaron 11 personas de 31,9 ± 5,7 años en promedio (mujeres 30,2 ± 2,9 y hombres 34,0 ± 7,8) completamente dentados de primer molar a primer molar, sin trastornos temporomandibulares ni tratamiento previo de ortodoncia. Los archivos fueron procesados mediante scripts, desarrolladas en MATLAB®. Entre los resultados más relevantes, se encontró diferencia estadística entre hombres y mujeres en relación al área Frontal del polígono de Posselt, y los resultados del área del polígono sagital de todos los participantes, fue mayor que en estudios previos.
The temporomandibular joints and associated muscles allow the mandible to move in the three planes (sagittal, frontal and horizontal), in this way the jaw can perform complex mandibular movements. For several decades, mandibular border movements have been studied. However, studies were initially carried out in two dimensions (2D). At the present time, it is possible to analyze mandibular kinematics in three dimensions (3D), with the 3D electromagnetic articulograph (EMA). The objective of the study is to evaluate the mandibular border movements (sagittal, frontal and horizontal), using 3D electromagnetic articulation. In this analysis, 11 subjects 31.9 ± 5.7 years of age on average, participated (women 30.2 ± 2.9 and men 34.0 ± 7.8) completely dentate patients, from first to first molar, with no temporomandibular disorders or orthodontic pretreatment. Files were processed using scripts, developed in MATLAB®. Among the most relevant results, a statistical difference was found between men and women in relation to the Frontal area of Posselt polygon, and results of the sagittal polygon area of all the participants were greater than those reported in previous studies.
Subject(s)
Humans , Male , Female , Adult , Denture, Complete , Mandible/diagnostic imaging , Temporomandibular Joint , Biomechanical Phenomena , Sex Factors , Electromagnetic Phenomena , Mandible/physiology , Movement/physiologyABSTRACT
La masticación se ha estudiado desde diferentes puntos de vista, utilizando alimentos de prueba naturales y artificiales. La evidencia es escasa cuando se analizan alimentos a base de cereales, que van desde cereales para el desayuno hasta barras de granola. El investigar este tipo de alimentos, se vuelve importante para entender el comportamiento de la masticación frente a alimentos con diferentes composiciones y texturas, y como estas características pueden influir en el proceso masticatorio. Se analizó la masticación desde un punto de vista cinemático, en sujetos jóvenes dentados. El alimento de prueba utilizado fue granola prototipo y maní, este último se ha estudiado en sujetos con rehabilitación protésica y su consumo se recomienda en esta población. Se analizaron las características cinemáticas de la masticación como numero de ciclos, frecuencia masticatoria, velocidad de masticación de ascenso y descenso, y el área de masticación en los tres planos del espacio. Se relacionaron los movimientos masticatorios con los movimientos mandibulares bordeantes que conformaron el polígono de Posselt, este también se analizó en los tres planos espaciales. En todas las variables analizadas la granola presento valores mayores, excepto en el número de ciclos masticatorios, sólo se encontraron diferencias estadísticamente significativas (p= 0,03) al comparar la velocidad (ascenso y descenso) y el área de masticación en el plano horizontal.
Chewing has been studied from different points of view, using natural and artificial foods test. When analyzing cereal-based foods, from breakfast cereals to granola bars, the evidence is scarce. Investigate this type of food is important to understand the behavior of chewing, with foods of different compositions and textures, and how these characteristics can influence the chewing process. Chewing was analyzed from a cinematic point of view, in young subjects complete dental. The test food used was prototype granola and peanuts, last one has been studied in subjects with prosthetic rehabilitation and its consumption is recommended in this population. The kinematic characteristics of chewing were analyzed: number of cycles, chewing frequency, ascent and descent chewing speed, and the chewing area in the three planes of space. The masticatory movements were related to the bordering mandibular movements, that formed the Posselt polygon, which was also analyzed in the three spatial planes. In all the variables analyzed, granola showed higher values, except in the number of chewing cycles, only statistically significant differences (p = 0.03) were found when comparing speed (ascent and descent) and the chewing area in the horizontal plane.
Subject(s)
Humans , Male , Female , Adult , Young Adult , Biomechanical Phenomena , Mandible/physiology , Mastication/physiology , Arachis , Edible Grain , Electromagnetic PhenomenaABSTRACT
Mapudungun is a language used by Mapuche people in some regions of Chile and Argentina. The aim of this study was to describe the vowel phonemes with regard to the articulatory parameters (position of the tongue with respect to the palate and jaw opening) and acoustic parameters (f0, F1, F2 and F3) in Mapudungun speakers in the Region of La Araucanía. The vocalic phonemes of Mapudungun are six, where the first five are similar to those used in Spanish (/a e i o u/), to which is added a sixth vowel (/ɨ/) with its vocalic allophones (/ɨ/) and [Ә]. Three Mapudungun speakers were evaluated. The tongue movements were collected by Electromagnetic Articulography 3D and the data were processed with MATLAB and PRAAT software. It was possible to describe the trajectory of each third of the tongue during the production of the vowels. It was observed that the sixth vowel /Ә/ had minimal jaw opening during its pronunciation. In addition, the characteristic of /Ә/ as an unrounded mid-central vowel was corroborated. In this study, the tongue of mapudungun speakers was in a more posterior position than the found in other studies.
El Mapudungun es un lenguaje utilizado por los mapuches en algunas regiones de Chile y Argentina. El objetivo de este estudio fue describir los fonemas vocálicos respecto a los parámetros articulatorios (posición de la lengua respecto al paladar y apertura mandibular) y los parámetros acústicos (f0, F1, F2 y F3) en hablantes de Mapudungun en la Región de La Araucanía, los fonemas vocálicos de Mapudungun son seis, donde los primeros cinco son similares a los utilizados en español (/a e i o u /), a los que se agrega una sexta vocal (/ɨ/) con sus alófonos vocálicos [ɨ] y [Ә]. Se evaluaron tres hablantes de Mapudungun. Los movimientos de la lengua fueron registrados por Articulografía Electromagnética 3D y los datos fueron procesados con el software MATLAB y PRAAT. Fue posible describir la trayectoria de cada tercio de la lengua durante la producción de las vocales. Se observó que la sexta vocal /Ә/ tenía una apertura mínima de la mandíbula durante su pronunciación. Además, se corroboró la característica de /Ә/ como vocal central media no redondeada. En este estudio, la lengua de los hablantes de mapudungun estaba en una posición más posterior que la encontrada en otros estudios.
Subject(s)
Humans , Male , Female , Adult , Speech Production Measurement/instrumentation , Tongue/physiology , Phonetics , Indians, South American , Jaw/physiology , Speech Acoustics , Pilot Projects , Electromagnetic PhenomenaABSTRACT
ABSTRACT: Aging is a dynamic process that includes various alterations in the oral cavity, with tooth loss being the most frequent. Rehabilitative treatment may include removable or fixed prostheses and implants. The aim of this study was to describe the geometric (trajectory, ranges, areas) and kinematic (speed) characteristics of the mandibular and masticatory movements threedimensionally in participants with dental prostheses. A sample of 10 participants with removable prosthetic rehabilitation was divided into three groups (complete, atypical and overdenture) the characteristics of mandibular movements bordering and chewing with 3D Electromagnetic Articulography were measured. The Posselt polygonin was obtained, the frontal and sagittal plans, its areas, trajectories and ranges are analyzed. The masticatory movements were analyzed in the area of each cycle, the frequency, the speed and the reason between the masticatory cycle and the bordering movements, no significant differences between the groups. Subjects with dental prostheses, regardless of the type, they showed low of motion (border and functional) compared to dentate subjects with no functional alterations whose values have been reported in the literature. The subjects with overdenture have values closer to what is described for young dentate subjects.
RESUMEN: El envejecimiento es un proceso dinámico que incluye varias alteraciones en la cavidad oral, siendo la pérdida de dientes la más frecuente. El tratamiento de rehabilitación puede incluir prótesis fijas o removibles y/o implantes. El objetivo de este estudio fue describir las características geométricas (trayectoria, rangos, áreas) y cinemáticas (velocidad) de los movimientos mandibulares y masticatorios en participantes con prótesis dentales realizando un análisis en tres dimensiones. Se consideró una muestra de 10 participantes con rehabilitación protésica y se dividió en tres grupos (prótesis total, atípica e implantosoportada), se midieron las características de los movimientos mandibulares bordeantes y masticatorios con articulografía electromagnética 3D. Se obtuvo el polígono Posselt en los planos frontal y sagital, se analizaron sus áreas, trayectorias y rangos. Se analizaron los movimientos masticatorios en cuanto al área de cada ciclo, la frecuencia, la velocidad y la razón entre el área el ciclo masticatorio y los movimientos bordeantes, sin diferencias significativas entre los grupos. Los sujetos con prótesis dentales, independientemente del tipo, mostraron disminución de movimiento (bordeante y funcional) en comparación con los sujetos dentados sin alteraciones funcionales cuyos valores se han informado en la literatura. Los sujetos con prótesis implantosoportada tienen valores más cercanos a lo que se describe para sujetos jóvenes dentados.