Advancements in Solid-State Hydrogen Storage: A Review on the Glass Microspheres.

Glass microspheres, with their unique internal structure and chemical stability, offer a promising solution for the challenges of hydrogen storage and transmission, potentially advancing the utility of hydrogen as a safe and efficient energy source. In this review, we systematically evaluate various treatment and modification strategies, including fusion, sol-gel, and chemical vapor deposition (CVD), and compare the performance of different types of glass microspheres. Our synthesis of current research findings reveals that specific low-cost and environmentally friendly modification techniques can significantly enhance the hydrogen storage efficiency of glass microspheres, with some methods increasing storage capacity by up to 32% under certain conditions. Through a detailed life-cycle and cost-benefit assessment, our study highlights the economic and sustainability advantages of using modified glass microspheres. For example, selected alternative materials used in lightweight vehicles have been shown to reduce density by approximately 10% while reducing costs. This review not only underscores the contributions of modified glass microspheres to overcoming the limitations of current hydrogen storage technologies but also provides a systematic framework for improving their performance in hydrogen storage applications. Our research suggests that modified glass microspheres could help to make hydrogen energy more commercially viable and environmentally friendly.

Recent advances in the treatment of renal stones using flexible ureteroscopys.

Upper urinary tract stones are a common urological disease that can be treated by flexible ureteroscopy (FURS) through the natural urinary tract, in addition to extracorporeal shock wave lithotripsy (ESWL) and percutaneous nephrolithotomy (PCNL). The advantages of FURS are less trauma, faster recovery, and fewer complications, while its disadvantages include poor results of lithotripsy and stone extraction when dealing with larger stones, and prolonged operation time. Over the last two decades, the emergence of new technologies such as FURS combined with negative pressure suction, robot-assisted FURS, and artificially intelligent FURS, coupled with improvements in laser technology (the use of thulium fiber lasers (TFL) and the invention of single-use flexible ureteroscopes (su-fURS) suitable for primary level application, have significantly increased the global adoption of FURS. This surge in usage holds a promising future in clinical application, benefiting a growing number of patients with renal calculi. Accompanied by changes in technical concepts and therapeutic modalities, the scope of indications for FURS is broadening, positioning it as a potential primary choice for urolithiasis treatment in the future. This review outlines the progress in employing flexible ureteroscopy for the treatment of renal calculi in order to generate insights for further research.

YAP1 inhibits RSL3-induced castration-resistant prostate cancer cell ferroptosis by driving glutamine uptake and metabolism to GSH.

High levels of YAP1 and ferroptosis activation in castration-resistant prostate cancer (CRPC) can inhibit CRPC progression and improve its sensitivity toward chemotherapeutics drugs. However, whether YAP1 regulates ferroptosis in CRPC cells and the underlying mechanisms are unknown. The protein levels of YAP1, SLC1A5, and GLS1 in benign prostatic hyperplasia (BPH), prostate cancer (PCa) that did not progress to CRPC, and CRPC tissue samples were evaluated using western blotting. In PC-3 and DU-145 cells, YAP1 overexpression vector, small-interfering RNA, specific inhibitor verteporfin, ferroptosis-inducer RSL3, SLC1A5-inhibitor V-9302, and GLS1-inhibitor CB-839 were used. Immunofluorescence, flow cytometry, dual-luciferase reporter gene, and related kits were used to investigate the effect of YAP1 on the ferroptosis activity in CRPC cells and its underlying mechanisms. YAP1 promoted extracellular glutamine uptake and subsequent production of glutamate and glutathione (GSH), and increases the GPX4 activity. For the activation of ferroptosis by RSL3, YAP1 decreased the levels of reactive oxygen species, malondialdehyde, and lipid peroxidation, and the proportion of dead cells. Mechanistically, YAP1 promoted the expression of SCL1A5 and GLS1 and further increased the GSH levels and GPX4 activity. Thus, inhibiting SLC1A5 or GLS1 activity could alleviate the antagonistic effect of YAP1 on the ferroptosis of RSL3-induced CRPC cells. In CRPC, the YAP1 level is high, which enters the nucleus and promotes the expressions of SLC1A5 and GLS1, thereby promoting cellular glutamine uptake and metabolism to generate glutamate and further synthesizing GSH, increasing GPX4 activity, improving cellular antioxidant capacity, and inhibiting cell death.

Immunological role and prognostic value of SPARCL1 in pan-cancer analysis.

Background: Secreted protein acidic and rich in cysteine-like 1 (SPARCL1) was a kind of extracellular matrix glycoprotein. SPARCL1 was strongly inhibited in most cancers. However, the potential functions of SPARCL1 in the pan-cancer cohort have not been widely studied. Methods: We evaluated the transcriptional level and the prognostic value of SPARCL1 in 33 types of cancer and revealed the relationship between genetic alterations of SPARCL1 and the tumor mutation burden. Meanwhile, we assessed the correlations between SPARCL1 and tumor-infiltrating lymphocytes across cancers. Results: The transcriptional level of SPARCL1 was inhibited in most cancers. Although SPARCL1 was down-regulated in most cancers, SPARCL1 might play a protective or detrimental role in different cancers. We demonstrated that mutation count was elevated in the altered SPARCL1 group in several cancers. Additionally, we found a significant positive correlation between SPARCL1 and macrophage infiltration levels in most cancers. Especially, marker sets of M2 macrophages were strongly related to SPARCL1 in cholangiocarcinoma, colon adenocarcinoma, rectum adenocarcinoma, and pancreatic adenocarcinoma. Conclusion: Our study found that SPARCL1 might work as a biomarker for prognosis and immune infiltration in pan-cancer analysis.

Bibliometric analysis of the 100 top-cited articles on immunotherapy of urological cancer.

PURPOSE: To highlight the scientific progress in immunotherapy of urological cancer by identifying and analyzing the 100 top-cited (T100) articles from the last 15 years. METHODS: Papers in immunotherapy of urological cancer were identified from Clarivate Web of Science Core Collection database. Data of the T100 articles and papers published in recent 2 years, including citations, topic, year of publication, country of origin, institution and authorship, were extracted and analyzed. RESULTS: Of the T100 articles, the citation number ranged from 7387 to 183 with a mean of 590.66. The USA led the field with 80 T100 articles and 53097 citations. Pro Sharma P from MD Anderson Cancer Center was at the top of list with 8 T100 articles (3 as first author and 6 as corresponding author). Memorial Sloan Kettering Cancer Center ranked first with 26 T100 articles and 22573 citations, followed by Johns Hopkins University with 21 T100 articles and 25095 citations. Forty-nine T100 articles were related to the renal cancer, followed by prostate cancer (29), bladder cancer (13) and urothelial cancer (13). According to the type of immunotherapy, most T100 articles were related to ICI (55 articles) and vaccine (19 articles). CONCLUSIONS: It is the first bibliometric analysis to identify the T100 articles on immunotherapy of urological cancer. The USA made great contribution in the field of immunotherapy related to urological cancer. Renal, bladder and prostate cancers were the major organs treated by immunotherapy especially by ICIs and vaccines. The multiple aspects of ICIs research in renal and bladder cancer and the neoantigen-based vaccine therapy will be hotspots for future research.

Plasma-Sprayed (Bi2O3)0.705 (Er2O3)0.245 (WO3)0.05 Electrolyte for Intermediate-Temperature Solid Oxide Fuel Cells (IT-SOFCs).

Stabilized bismuth oxide material with fluorite structure (δ-Bi2O3) has been studied as a promising electrolyte material for intermediate temperature solid oxide fuel cells (IT-SOFCs) due to its high oxygen ion conductivity in mediate temperature. Especially, the ternary system Bi2O3-Er2O3-WO3 is widely concerned for its high ionic conductivity and thermal stability. In this study, regarding its low melting point, the possibility to deposit dense Bi2O3-Er2O3-WO3 ((Bi2O3)0.705 (Er2O3)0.245 (WO3)0.05, EWSB) electrolyte by plasma spraying was examined. It was confirmed that the sintered EWSB bulk presents a high ion conductivity of 0.34 S cm-1 at 750 °C and excellent stability that indicates no structure transformation and conductivity degradation after annealing at 600 °C for 1000 h. The phase structure and cross-sectional microstructure of plasma-sprayed EWSB were characterized by XRD and SEM. Results showed that the as-plasma-sprayed EWSB presents a dense microstructure with well bonded lamellae. The XRD showed the formation of EWSB with δ-phase and a trace of ß-phase, while the ß-phase disappeared after annealing at 750 °C for 10 h. The deposited EWSB electrolyte presented the excellent ionic conductivity of 0.26 S cm-1 at 750 °C which can be directly applied to SOFC at intermediate temperature.

Recent Research Advances in Plasma Spraying of Bulk-Like Dense Metal Coatings with Metallurgically Bonded Lamellae.

Although thermal spray metallic coatings have been widely used for materials protection from wear, corrosion and oxidation, its porous feature limits the full utilization of materials potential. Moreover, the oxidation inherent to thermal spraying in the ambient atmosphere is detrimental to interlamellar bonding formation, which further degrades the performance of thermal spray metal coatings. How to tape out the full potential of spray materials in the form of the coating is a still great challenge to thermal spray coating technology. Facing such challenge, recent efforts have been made to deposit dense metallic coatings with sufficiently bonded lamellae by oxide-free molten droplets through atmospheric plasma spraying. In this paper, the strategies for depositing bulk-like metal coatings will be reviewed. The formation of the bulk-like coating through post-spray treatments is briefly reviewed including post-spray heat treatment and laser remelting following the brief introduction to the features of thermal spray metallic coatings. The effect of the substrate preheating temperature on the splat formation and subsequently the adhesion formation was examined to reveal the dominant limitation of resultant oxide scale. Then, the role of the deposition temperature on the formation of bulk-like metal deposits with neglecting the effect of oxidation during spraying by vacuum plasma spraying practices is shortly presented. The recent progress on the new strategies to develop spread-fusing bonding mechanism and in-situ in-flight deoxidizing mechanism through developing ultra-hot metallic droplets will be introduced. The thermodynamics and kinetics requirements for the in-situ in-flight deoxidizing through deoxidizer elements adding to alloy spray powders for achieving oxide-free molten droplets in the ambient atmosphere are examined. The conditions to develop the spread-fusing mechanism during the spreading of impacting molten metal droplet for metallurgical bonding are presented. It is obvious from this review paper that the realization of two mechanisms depends on both the spray materials design and heating control of in-flight particles. Through the generation of ultra-hot droplets by plasma spraying to achieve oxide-free molten droplets, strategically it will be possible to deposit bulk-like dense metallic coating through spread-fusing of splat surfaces with limited post-spray oxidation. Such strategies will tape out the full potential of coating materials and open up the new application fields for plasma spraying.

Microstructure and Ablation Behavior of Low-Pressure Plasma Sprayed ZrB2 Coatings Down to 100 Pa.

The effect of chamber pressure on the microstructure and ablation behavior of ZrB2 coatings deposited by low-pressure plasma spraying was investigated. The results showed that as the spray chamber pressure further was reduced to less than 50 kPa, the porosity of the coating deposited at the same distance decreased with the chamber pressure, and the coating prepared under 100 Pa presented the lowest porosity of about 0.89%. The ablation performance test subjected to high-temperature plasma jet revealed that the linear ablation rate of ZrB2 coating increased with the porosity of the coating. As a result, among the ZrB2 coatings deposited at chamber pressures of 100 Pa, 5 kPa, 10 kPa and 50 kPa, the dense coating deposited at 100 Pa showed the lowest ablation rate of 0.33 µm/s. The dense ZrB2 coating with a thickness of about 100 µm was able to withstand 300 s ablation by a plasma flame with a net power of 25 kW resulting in an ablating coating surface temperature of about 2000 °C. The ablation mechanism of the coating was also examined.

Identification of the Prognostic Value Among Suppressor Of Cytokine Signaling Family Members in Kidney Renal Clear Cell Carcinoma.

Background: Kidney renal clear cell carcinoma (KIRC) has become one of the most prevalent malignancies worldwide and remains a crucial cause of cancer-related morbidity and mortality. Aberrant activation of the JAK/STAT pathway acts as an important role in KIRC. The suppressor of cytokine signaling (SOCS) family members are the key negative regulators of the JAK/STAT pathway. SOCS family members have been verified to act as significant roles in regulating cellular responses to many cytokines and growth factors. However, whether the expression levels of SOCS affect the prognosis of patients with KIRC is still elusive. Methods: We first evaluated the expression of SOCS family genes in KIRC and determined the correlation between SOCS expression and different clinicopathological features. Then, we analyzed the genetic alterations, potential functions, transcription factor targets, and immune infiltration of SOCS family members based on the information available on public databases. Finally, we assessed the prognostic value of differentially expressed SOCS family members. Results: The expression levels of SOCS2, SOCS4, SOCS6, SOCS7, and CISH were downregulated in KIRC, and all SOCS genes were associated with clinicopathological features of patients with KIRC. SOCS family members have been predominantly related to protein binding, signaling adaptor activity, and JAK/STAT cascade. We found that STAT3, STAT6, and IRF1 are the key transcription factors that may be participated in the regulation of SOCS. We also found an association between the expression levels of SOCS and the immune infiltrates of KIRC. Finally, we have illuminated that SOCS1 and SOCS3 are risky genes, whereas SOCS2, SOCS4, SOCS6, SOCS7, and CISH are some of the protective genes for patients with KIRC; based on these, we have created a KIRC prognostic index for predicting the prognosis of patients of KIRC. Conclusion: Our study may contribute to further understanding the functions of SOCS genes in KIRC, which may help clinicians in selecting the appropriate drugs and predicting the outcomes for patients with KIRC.

Synthesis of Si-Based High-Efficiency and High-Durability Superhydrophilic-Underwater Superoleophobic Membrane of Oil-Water Separation.

Oil pollution is caused by the frequent discharge of contaminated industrial wastewater and accidental oil spills and is a severe environmental and health concern. Therefore, efficient materials and processes for effective oil-water separation are being developed. Herein, SiO2-Na2SiO3-coated stainless steel fibers (SSF) with underwater superoleophobic and low-adhesion properties were successfully prepared via a one-step hydrothermal process. The modified surfaces were characterized with scanning electron microscopy (SEM), and contact angle measurements to observe the surface morphology, confirm the successful incorporation of SiO2, and evaluate the wettability, as well as with X-ray diffraction (XRD). The results revealed that SiO2 nanoparticles were successfully grown on the stainless-steel fiber surface through the facile hydrothermal synthesis, and the formation of sodium silicate was detected with XRD. The SiO2-Na2SiO3-coated SSF surface exhibited superior underwater superoleophobic properties (153-162°), super-hydrophilicity and high separation efficiency for dichloromethane-water, n-hexane-water, tetrachloromethane-water, paroline-water, and hexadecane-water mixtures. In addition, the as-prepared SiO2-Na2SiO3-coated SSF demonstrated superior wear resistance, long-term stability, and re-usability. We suggest that the improved durability may be due to the presence of sodium silicate that enhanced the membrane strength. The SiO2-Na2SiO3-coated SSF also exhibited desirable corrosion resistance in salty and acidic environments; however, further optimization is needed for their use in basic media. The current study presents a novel approach to fabricate high-performance oil-water separation membranes.

Analyzing and Validating the Prognostic Value of a TNF-Related Signature in Kidney Renal Clear Cell Carcinoma.

Background: Kidney renal clear cell carcinoma (KIRC) has the highest incidence rate in renal cell carcinoma (RCC). Although bioinformatics is widely used in cancer, few reliable biomarkers of KIRC have been found. Therefore, continued efforts are required to elucidate the potential mechanism of the biogenesis and progression of KIRC. Methods: We evaluated the expression of tumor necrosis factor (TNF) family genes in KIRC, and constructed a prognostic signature. We validated the signature by another database and explored the relationship between the signature and progression of KIRC. We assessed the prognostic value, immune infiltration, and tumor mutation burden (TMB) of the signature in KIRC. Results: We selected four key genes (TNFSF14, TNFRSF19, TNFRSF21, and EDA) to construct the TNF-related signature. We divided the KIRC patients into high- and low-risk groups based on the signature. Patients with higher risk scores had shorter overall survival and worse prognosis. With another database, we validated the value of the signature. The signature was considered as an independent risk factor. A higher level of risk score was relevant to higher level of immune infiltration, especially T regulatory cells, CD8+ T cells, and macrophages. The signature was also associated with TMB scores, and it may have an effect on assessing the efficacy of immunotherapy. Conclusion: This is the first TNF-family-related signature of KIRC and we demonstrated its effectiveness. It played a significant role in predicting the prognosis of patients with KIRC. It also has the potential to become a powerful tool in guiding the immunotherapy of KIRC patients in clinical practice.

Fabrication of Nanostructured Cadmium Selenide Thin Films for Optoelectronics Applications.

There is lot of research work at enhancing the performance of energy conversion and energy storage devices such as solar cells, supercapacitors, and batteries. In this regard, the low bandgap and a high absorption coefficient of CdSe thin films in the visible region, as well as, the low electrical resistivity make them ideal for the next generation of chalcogenide-based photovoltaic and electrochemical energy storage devices. Here, we present the properties of CdSe thin films synthesized at temperatures (below 100°C using readily available precursors) that are reproducible, efficient and economical. The samples were characterized using XRD, FTIR, RBS, UV-vis spectroscopy. Annealed samples showed crystalline cubic structure along (111) preferential direction with the grain size of the nanostructures increasing from 2.23 to 4.13 nm with increasing annealing temperatures. The optical properties of the samples indicate a small shift in the bandgap energy, from 2.20 to 2.12 eV with a decreasing deposition temperature. The band gap is suitably located in the visible solar energy region, which make these CdSe thin films ideal for solar energy harvesting. It also has potential to be used in electrochemical energy storage applications.

Synthesis of boron carbonitride nanosheets using for delivering paclitaxel and their antitumor activity.

As a structural analog of graphene and boron nitride, hexagonal boron carbonitride nanosheets (BCNNSs) are supposed to be a potential drug deliverer. In the present work, an improved solid-state reaction method combined with ultrasonic exfoliating was reported for preparing BCNNSs. Vapor-solid (VS) mechanism was proposed to be responsible for the formation of BCNNSs. The BCNNSs were further modified by DSPE-mPEG-5000 to improve their dispersion in aqueous solution. It was found that the BCNNSs-PEG nanocomplex could be efficiently taken in by MDA-MB-231 breast cancer cells evidenced by inverted fluorescence microscopy. The PEGylated BCNNSs showed an outstanding ability to load paclitaxel through π-π interaction and hydrophobic interaction, and BCNNSs-PEG-loaded paclitaxel presented higher cytotoxicity in comparison with free paclitaxel. BCNNSs may become a promising candidate for delivering paclitaxel and other hydrophobic drugs.

Plasma-Sprayed High-Performance (Bi2O3)0.75(Y2O3)0.25 Electrolyte for Intermediate-Temperature Solid Oxide Fuel Cells (IT-SOFCs).

Rare earth element-doped bismuth oxides with the fluorite structure (δ-Bi2O3) exhibit high oxygen ion conductivity at low temperature, which is promising electrolyte materials for intermediate-temperature solid oxide fuel cells (IT-SOFCs). However, traditional co-sintering process is not applicable to the manufacturing of IT-SOFCs using low melting point Bi2O3-based electrolyte, while further high-temperature processing is not required for deposition Bi2O3-based electrolytes. In this study, plasma spraying was used to examine the possibility to deposit high-performance Bi2O3-based electrolytes without the following high-temperature process. (Bi2O3)0.75 (Y2O3)0.25 (YSB) spray powders were prepared by the sinter-crushing method. The YSB electrolytes were fabricated by plasma spraying at different deposition temperatures. The effects of deposition temperature on the coating microstructure, crystalline stability, and ion conductivity were investigated. Results showed that the as-sprayed YSB electrolytes present a dense microstructure with well-bonded lamellar interfaces. The pure δ-phase YSB electrolyte was deposited with 37.5-75 µm powders at a deposition temperature of 350 °C. The deposited YSB electrolyte presented the excellent ionic conductivity of 0.19 S cm-1 at 700 °C in comparison with 0.21 S cm-1 for sintered bulk.

Effect of Powder Particle Size and Spray Parameters on the Ni/Al Reaction During Plasma Spraying of Ni-Al Composite Powders.

It was known for long that Ni-Al composite powders can be used to deposit self-bonding coating as a bond coat for common ceramic coatings due to the exothermic reaction between Ni and Al. However, it was found that with commercial Ni-Al composite powders with a large particle size, it is difficult to ignite the self-propagating reaction between Ni and Al to form Ni-Al intermetallics by plasma spraying. In this study, Ni-Al composite powder particles of different sizes were used to prepare Ni-Al intermetallics-based coatings by plasma spraying. The dependencies of the exothermic reaction between Ni and Al and the coating microstructure on powder particle size and spray parameters were investigated. The phase composition, microstructure, porosity and oxide content of the coatings were characterized by x-ray diffraction, scanning electron microscope and image analyzing. The results show that particle size of Ni-Al composite powders is the dominant factor controlling the exothermic reaction for the formation of Ni-Al intermetallics during plasma spraying. When the powders larger than about 50 µm are used, the reaction forming aluminide cannot complete even by heating of plasma flame generated at high plasma arc power. However, when smaller powders less than 50 µm are used, the exothermic reaction can completely occur rapidly in plasma spraying, contributing to heating of Ni-Al droplets to the highest temperature for development of the self-bonding effect. The positive relationship between molten droplet temperature and tensile adhesive strength of the resultant coatings is recognized to confirm the contribution of high droplet temperature to the adhesive or cohesive strength.

The Biogenesis, Functions, and Roles of circRNAs in Bladder Cancer.

Bladder cancer (BCa) is the 10th most prevalent malignancy worldwide and remains a crucial cause of cancer-related morbidity and mortality. Circular RNAs (circRNAs), a large class of endogenous non-coding RNAs, contain unique covalent closed structures and their biogenesis and turnover are regulated by multiple factors. Recently, multiple circRNAs have been found to serve as important factors in several biological processes such as tumorigenesis. An increasing amount of research discovered that circRNAs are dysregulated in multiple cancer tissues compared with matched normal tissues, especially in BCa, indicating that circRNAs can act as biomarkers for the diagnosis and prognosis of BCa. In this review, we focus on the biogenesis, properties, turnover, and functions of circRNAs, summarizing their potential functions and clinical implications in BCa.

MicroRNA-155 deficiency attenuates inflammation and oxidative stress in experimental autoimmune prostatitis in a TLR4-dependent manner.

To explore the mechanism of microRNA-155 (miR-155) deficiency, protecting against experimental autoimmune prostatitis (EAP) in a toll-like receptor 4 (TLR4)-dependent manner. After wild-type (WT) and miR-155-/- mice were injected with complete Freund's adjuvant and prostate antigen to establish EAP model, half were randomly selected for injection with lipopolysaccharide (LPS, a TLR4 ligand). The following experiments were then performed: von Frey filaments, hematoxylin-eosin (HE) staining, real time quantitative polymerase chain reaction (qRT-PCR), Western blotting, and enzyme-linked immunosorbent assay (ELISA). And the activities of superoxide dismutase (SOD) and glutathione peroxidase (GSH-Px) and the level of Malondialdehyde (MDA) were detected by corresponding kits.miR-155-/- mice with prostatitis exhibited the attenuated pelvic tactile allodynia/hyperalgesia and the suppressed TLR4/nuclear factor-kappa B (NF-κB) pathway as compared with the WT mice with prostatitis. In addition, LPS enhanced the upregulation of miR-155 and the activation of the TLR4/NF-κB pathway in the prostatic tissues of WT mice with EAP. Furthermore, prostatitis mice had aggravated inflammation scores accompanying the increased interleukin (IL)-1ß, tumor necrosis factor-α, IL-6, interferon-γ, IL-12, and MDA in prostatic tissues with the decreased IL-10, SOD and GSH-Px, and the unaltered IL-4. Compared with the mice from the WT + EAP group and the miR-155-/- + EAP + LPS group, mice from the miR-155-/- + EAP group had decreased inflammation and oxidative stress. miR-155 deficiency ameliorated pelvic tactile allodynia/hyperalgesia in EAP mice and improved inflammation and oxidative stress in prostatic tissues in a TLR4-dependent manner involving NF-κB activation, thereby exerting a therapeutic effect in chronic prostatitis treatment.

A Durable and Self-Cleaning Superhydrophobic Surface Prepared by Precipitating Flower-Like Crystals on a Glass-Ceramic Surface.

Herein, a superhydrophobic surface with superior durability was fabricated on a glass-ceramic surface by crystallization, hydrofluoric acid (HF) etching, and surface grafting. The as-prepared glass-ceramic surface was composed of three-dimensional flower-like micro-clusters, which were self-assembled from numerous nanosheets. Such a dual-scale rough surface exhibited superhydrophobicity, with a water contact angle (WCA) of 170.3° ± 0.1° and a sliding angle (SA) of ~2° after grafting with 1H, 1H, 2H, 2H-perfluorodecyltriethoxysilane (FAS-17). This can be attributed to the synergistic effect between the dual-scale structure and surface chemistry. Furthermore, this surface exhibited excellent self-cleaning properties, stability against strong acid and strong alkali corrosion, and anti-stripping properties.

The 100 most-cited articles in urological surgery: A bibliometric analysis.

BACKGROUND: The purpose of this bibliometric analysis was to identify and assess the 100 most-cited articles (T100 articles) on urological surgery. METHODS: The Web of Science (WoS) Core Collection database was used to investigate the T100 articles in the field of urological surgery. Different aspects of the T100 articles, including the countries, journals, authors, and topics, were analyzed. RESULTS: The number of citations of T100 articles published between 1989 and 2016 ranged from 334 to 2189. The T100 articles originated from 28 countries, with more than half originating from the USA (n = 80). Professor Bill-Axelson A from Uppsala University Hospital published the largest number of T100 articles as the first author (4) and as a coauthor (1). The Memorial Sloan Kettering Cancer Center from the USA is the top institution with the most T100 articles in the field of urological surgery. The special journal Journal of Urology published 41 of the T100 articles, which had a total of 19780 citations. CONCLUSIONS: Our study analyzed the 100 most-cited articles in the field of urological surgery. The USA is the dominant country in terms of the number of T100 articles, scientists and institutions. Surgery related to urological cancer has garnered the most academic attention, especially prostate cancer and renal cancer.

Bioinspired Mechanically Robust Metal-Based Water Repellent Surface Enabled by Scalable Construction of a Flexible Coral-Reef-Like Architecture.

Mechanical robustness is a central concern for moving artificial superhydrophobic surfaces to application practices. It is believed that bulk hydrophilic materials cannot be use to construct micro/nanoarchitectures for superhydrophobicity since abrasion-induced exposure of hydrophilic surfaces leads to remarkable degradation of water repellency. To address this challenge, the robust mechanical durability of a superhydrophobic surface with metal (hydrophilic) textures, through scalable construction of a flexible coral-reef-like hierarchical architecture on various substrates including metals, glasses, and ceramics, is demonstrated. Discontinuous coral-reef-like Cu architecture is built by solid-state spraying commercial electrolytic Cu particles (15-65 µm) at supersonic particle velocities. Subsequent flame oxidation is applied to introduce a porous hard surface oxide layer. Owing to the unique combination of the flexible coral-reef-like architecture and self-similar manner of the fluorinated hard oxide surface layer, the coating surface retains its water repellency with an extremely low roll-off angle (<2°) after cyclic sand-paper abrasion, mechanical bending, sand-grit erosion, knife-scratching, and heavy loading of simulated acid rain droplets. Strong adhesion to glass, ceramics, and metals up to 34 MPa can be achieved without using adhesive. The results show that the present superhydrophobic coating can have wide outdoor applications for self-cleaning and corrosion protection of metal parts.