[Clinical research progress and implications of therapeutic vaccines for cervical cancer and precancerous lesions: a qualitative systematic review].

Objective: To systematically summarize and analyze the clinical research progress of therapeutic vaccines for cervical cancer or precancerous lesions. Methods: English databases (PubMed, Embase, Web of Science, Cochrane library, Proquest, and ClinicalTrails.gov) and Chinese databases (SinoMed, CNKI, WanFang, and VIP Database) were systematically searched to collect literature on therapeutic vaccines for cervical cancer or precancerous lesions from inception to February 18, 2021. After screening, we evaluated the risk of bias of included studies, and combed the basic information of the literature, research designs, information of vaccines, study patients, outcome indicators and so on, qualitatively summarized the clinical research progress. Results: A total of 71 studies were included in this systematic review, including 14 random controlled trials, 15 quasi-random controlled trials, 4 cohort studies, 1 case-control study, 34 case series studies and 3 case reports. The study patients included women aged 15~79 with cervical cancer or precancerous lesions in 18 countries from 1989 to 2021. On the one hand, there were 40 studies on therapeutic vaccines for cervical precancerous lesions (22 867 participants), involving 21 kinds of vaccines in 6 categories. Results showed 3 marketed vaccines (Cervarix, Gardasil, Gardasil 9) as adjuvant immunotherapies were significant effective in preventing the recurrence of precancerous lesions compared with the conization only. In addition, MVA E2 vaccine had been in phase Ⅲ clinical trials as a specific therapeutic vaccine, with relative literature showing it could eliminate most high-grade precancerous lesions. Therapeutic vaccines for precancerous lesions all showed good safety. On the other hand, there were 31 studies on therapeutic vaccines for cervical cancer (781 participants), involving 19 kinds of vaccines in 7categories, with none had been marketed. 25 studies were with no control group, showing the vaccines could effectively eliminate solid tumors, prevent recurrence, and prolong the median survival time. However, the vaccines effectiveness couldn't be statistically calculated due to the lack of a control group. As for the safety of therapeutic vaccines for cervical cancer, 9 studies showed that patients experienced serious adverse events after treatments, where 7 studies reported that serious adverse events occurred in patients couldn't be ruled out as the results of therapeutic vaccines. Conclusions: The literature review shows that the literature evidence for the therapeutic vaccines for cervical precancerous lesions is relatively mature compared with the therapeutic vaccines for cervical cancer. The four kinds of vaccines on the market are all therapeutic vaccines for precancerous lesions, but they are generally used as vaginal infection treatments or adjuvant immunotherapies for cervical precancerous lesions, not used for the specific treatments of cervical precancerous lesions. Other specific therapeutic vaccines are in the early stage of clinical trials, mainly phase Ⅰ/Ⅱ clinical trials with small sample size. The effectiveness and safety data are limited, and further research is still needed.

[Correlation analysis between children and adolescents watching food TV advertising and fast food consumption].

Based on the open data of China Health and Nutrition Survey (CHNS), 249 children, adolescents and 249 heads of families who completed two rounds of surveys in 2011 and 2015 were selected in this study. According to the fast food consumption of children and adolescents, they were divided into fast food consumption group and non-fast food consumption group. Logistic regression model was used to analyze the relationship between children and adolescents watching Food TV advertising and fast food consumption. After adjusting relevant factors, the results showed that children and adolescents requiring their parents to buy food in TV advertisements (OR=3.122, P=0.001), parents buying food for their children in TV advertisements (OR=4.717, P=0.036), children and adolescents buying food in TV advertisements themselves (OR=3.728, P=0.041), children and adolescents' preference for food in TV advertisements (OR=2.946, P=0.044) and the frequency of children and adolescents reported by their parents asking their parents to buy food in TV advertisements (OR=3.113, P=0.002) were associated with children and adolescents' fast food consumption.

Le Fort I osteotomy with segmentation for the treatment of maxillary dentoalveolar protrusion: a single-centre, 10-year outcome study.

A retrospective study was conducted to evaluate the stability and complications of Le Fort I osteotomy with segmentation for the treatment of bimaxillary dentoalveolar protrusion. A total of 120 consecutive patients who had undergone orthognathic surgery between 2008 and 2017 at a single centre were recruited. Lateral cephalometric radiographs were taken before surgery, within 6 weeks after surgery, and at 2 years after surgery. U1-SN and U1-PP underwent mean uprighting of 8.7° and 9.6°, respectively, and mean relapse of 2.1° and 2.6°, respectively (both P < 0.05). The only significant risk factor for relapse was the use of intermaxillary fixation (risk ratio (RR) 1.2, P = 0.01). The most common complication was wound dehiscence (41.7%), which was a significant risk factor for wound infection (RR 3.3, P < 0.01) and fixation hardware exposure (RR 3.7, P < 0.01). Other common complications were gingival recession (40.8%), periodontal bone loss (40%), and blood loss requiring transfusion (26.7%), the latter of which was associated with the preoperative diagnosis of vertical maxillary excess (RR 2.4, P = 0.01). Some degree of relapse occurred in more than 90% of the patients by 2 years after surgery. The procedure is not without risks and complications but may be useful in severe cases.

Spatial deviations of the temporomandibular joint after oncological mandibular reconstruction.

Spatial deviations of the temporomandibular joint (TMJ) after oncological mandibular reconstruction are important to the aesthetic and functional rehabilitation. The aim of this study was to clarify whether and how three dimensionally (3D) printed patient-specific surgical plates, and the preservation of the condyle or ramus, affect spatial deviations of the TMJ. A total of 33 patients who underwent mandibular reconstruction via computer-assisted surgery were included. Regarding absolute deviations, patients in the 3D-printed plate group showed smaller TMJ deviations compared to those in the conventional plate group. There was no difference in absolute deviations of the TMJ regardless of whether the condyle or ramus was preserved. Regarding physiological deviations, the impact on the contralateral TMJ was smaller in the 3D-printed plate group. Patients with both the condyle and ramus removed had significantly higher deviations of the condyle and joint space. In summary, 3D-printed patient-specific surgical plates improved the spatial accuracy of the TMJ. Under physiological conditions, TMJ deviations on the operated side were mainly affected by the preservation of the condyle. Removal of both the condyle and ramus caused more severe spatial interference to the TMJ; this should be further confirmed.

Timing of arthrocentesis in the management of temporomandibular disorders: an integrative review and meta-analysis.

The aim of this study was to assess the best timing to perform arthrocentesis in the management of temporomandibular disorders with regard to conservative treatment. A systematic search based on PRISMA guidelines, including a computer search with specific keywords, reference list search, and manual search was performed. Relevant articles were selected after three search rounds for final review based on six predefined inclusion criteria, followed by a round of critical appraisal. Eleven publications, including eight randomized controlled trials and three prospective clinical studies, were included in the review. The studies were divided into three groups based on the timing of arthrocentesis: (1) arthrocentesis as the initial treatment; (2) early arthrocentesis; and (3) late arthrocentesis. Meta-analysis was carried out to compare the efficacy of improvement in mouth opening and pain reduction in the three groups. All three groups showed improvement in mouth opening and pain reduction, with forest plots suggesting that arthrocentesis performed within 3 months of conservative treatment might produce beneficial results. We conclude that there is a knowledge gap in the current literature regarding the preferable timing to perform arthrocentesis in the management of temporomandibular disorders, and more high-quality randomized controlled trials are required to shed light on this subject.

Is there a difference between the thicknesses of the rami in mandibular asymmetry?

The purpose of this retrospective study was to investigate whether the thicknesses of the two rami differ in patients with mandibular asymmetry. Preoperative cone beam computed tomography scans of 78 patients with mandibular asymmetry were assessed for ramus thickness, mandibular length, and mandibular shift. The results showed that the ramus was thinner on the longer side than on the shorter side in 85.9% of the patients. On average, the longer side of the mandible was 2.74mm longer (range 0.07-9.90mm, standard deviation 1.92mm) and 0.55mm thinner (range -0.61 to 2.02mm, standard deviation 0.59mm) than the shorter side (both P<0.001). This study indicates a trend in the discrepancy in ramus thickness between the longer and shorter side of about 8% of the mean thickness of the ramus. Regression analysis showed that for every 1-mm increase in the length of the mandible, the thickness of the superior aspect of the ramus was reduced by 0.041 mm (P=0.009) and the anterior aspect by 0.125 mm (P=0.001). Age and sex did not have a significant influence on the thickness of the mandible. It is concluded that the longer side of the mandible tends to be thinner at the ramus than the shorter side in patients with mandibular asymmetry. The implication of this finding could be important in relation to the sagittal split ramus osteotomy.

Surgical morbidities of sagittal split ramus osteotomy versus intraoral vertical ramus osteotomy for the correction of mandibular prognathism: a randomized clinical trial.

The sagittal split ramus osteotomy (SSRO) and intraoral vertical ramus osteotomy (IVRO) are two common orthognathic procedures for the treatment of mandibular prognathism. This randomized clinical trial compared the surgical morbidities between SSRO and IVRO for patients with mandibular prognathism over the first 2 years postoperative. Ninety-eight patients (40 male, 58 female) with a mean age of 24.4±3.5 years underwent bilateral SSRO (98 sides) or IVRO (98 sides) as part or all of their orthognathic surgery. IVRO presented less short-term and long-term surgical morbidity in general. The SSRO group had a greater incidence of inferior alveolar nerve deficit at all follow-up time points (P< 0.01). There was more TMJ pain at 6 weeks (P= 0.047) and 3 months (P= 0.001) postoperative in the SSRO group. The SSRO group also presented more minor complications, which were related to titanium plate exposure and infection. There were no major complications for either technique in this study. Despite the need for intermaxillary fixation, IVRO appears to be associated with less surgical morbidity than SSRO when performed as a mandibular setback procedure to treat mandibular prognathism.

Development of a cantilever beam thrust stand for electric propulsion thrusters.

The application of electric thrusters on spacecrafts has become more and more extensive. Accurate, direct measurement of thrust is not only one of the most critical elements of electric thruster characterization but also one of the most difficult measurements to make in the ground test and verification of electric propulsion. It is hard to measure the thrust in a finite simulation environment due to small thrust and interference factors in the measurement. A cantilever beam thrust stand has been designed and tested in our propulsion laboratory. The device is used to measure the thrust of a plasma thruster multiple times a day. The thrust stand allows adjusting the instrument sensibility by changing the size of the cantilever beam. The range of thrust depends on the thrusters; e.g., for a 15 kg ion thruster, the thrust can vary from 10 mN up to 220 mN. Calibration of the system is carried out using calibrated mass. The balance results are compared to the thrust calculated using electrical parameters, showing an agreement within 3.16%.

Oral Epstein-Barr virus-positive mucocutaneous ulcer: gingival presentation of a benign lymphoproliferative lesion.

Epstein-Barr virus-positive mucocutaneous ulcer (EBVMCU) is a benign lymphoproliferative lesion related to iatrogenic or age-related immunosuppression in patients with prior Epstein-Barr virus (EBV) infection. Although the clinical presentation may resemble malignant disease, the course of EBVMCU is indolent, and regression is expected when immunosuppression is reduced. We present a case of EBVMCU in the gingiva of a 59-year-old male patient with long-standing pemphigus vulgaris. The initial presentation was suspicious for oral cavity cancer, which was ruled out by biopsy. After reduction of immunosuppression, the ulceration regressed and an area of exposed necrotic bone remained. Complete healing was achieved after sequestrectomy and primary closure with a local gingival flap.

A novel 'surgeon-dominated' approach to the design of 3D-printed patient-specific surgical plates in mandibular reconstruction: a proof-of-concept study.

Three-dimensionally (3D) printed patient-specific surgical plates have been proposed to facilitate mandibular reconstruction and are attracting extensive attention. We have recently reported the high accuracy of 3D-printed patient-specific surgical plates used in head and neck reconstruction. Based on this previous work, the current study proposes a novel 'surgeon-dominated' approach to the design of 3D-printed patient-specific surgical plates. The aim of this proof-of-concept study was to explore the workflow and technical procedures of the surgeon-dominated approach. The workflow includes virtual surgery, the design and printing of patient-specific surgical devices, and real surgery. The prototype of the patient-specific surgical plate was designed by surgeons and further optimized for 3D printing by engineers. Different types of mandibular defect were tested to confirm the wide applicability of this approach. Cases in which this approach was used were reviewed and the duration of time spent on each case studied. Based on a total of 16 patients, the time spent on virtual surgery and plate design was 18.83±13.19hours, and the time taken for 3D printing, post-processing, and product delivery was 162.9±55.15hours. Therefore, this novel surgeon-dominated approach is feasible and time-saving, which would likely promote the wide application of patient-specific surgical plates and lead to a new era of 'digitization and precision' in mandibular reconstruction. ClinicalTrials.gov registration: NCT03057223.

[The association of pre-pregnancy body mass and weight gain during pregnancy with macrosomia: a cohort study].

Objective: To examine the association of pre-pregnancy body mass and weight gain during pregnancy with macrosomia. Methods: From January 2015 to December 2015, a total of 20 477 pregnant women were recruited by probabilistic proportional scale sampling with simple randomization in Sichuan, Yunnan and Guizhou Provinces. Basic information of pregnant women, weight gain during pregnancy and weight of newborn were collected. A multiple logistic regression model was used to assess the association between the pre-pregnancy body mass and gestational weight gain indicators with macrosomia. Results: 20 321 mother-infant were included in the final analysis. 20 321 pregnant women were (30.09±4.10) years old and delivered at (39.20±1.29) weeks, among which 12 341 (60.73%) cases were cesarean delivery. The birth weight of 20 321 infants were (3 292.26±431.67) grams, and 970 (4.77%) were macrosomia. The multiple logistic regression model showed that after adjusting for the age of women, compared to the normal weight group in the pre-pregnancy, the overweight and obesity group elevated the risk of macrosomia, with OR (95%CI) about 1.99 (95%CI: 1.69-2.35) and 4.05 (95%CI: 3.05-5.39), respectively. After adjusting for the age, the pre-pregnancy BMI, delivery weeks, delivery mode and infant's gender, compared to the weight-gain appropriate group, higher weight gain rate in the mid-pregnancy and excessive total gestational weight gain elevated the risk of macrosomia, with OR (95%CI) about 1.99 (95%CI: 1.66-2.39) and 1.80 (95%CI: 1.55-2.08), respectively. Conclusion: The overweight before pregnancy, obesity before pregnancy, the rate of weight gain in the second trimester and the high total weight gain during pregnancy could increase the risk of macrosomia.

Amelogenin domain-containing NlChP38 is necessary for normal ovulation in the brown planthopper.

The brown planthopper (BPH), Nilaparvata lugens, is a major threat to rice production. The eggshell plays an important role in insect reproduction. The constituents and formation process of BPH eggshells remains largely unknown. Here, we report a novel eggshell-associated protein, NlChP38, containing an amelogenin domain, that is essential for normal ovulation in the BPH. NlChP38 is specifically expressed in the follicular cells from egg chambers at both RNA and protein levels. RNA interference of NlChP38 resulted in oocytes with loose and thin eggshell structure and caused ovulation difficulties. Immunofluorescence localization showed NlChP38 is deposited between follicular cells and oocytes during late choriogenesis. These results indicate that NlChP38 plays an important role in eggshell formation and could be a potential target for RNA interference control of the BPH.

[Relations between pregestational body mass index, gestational weight gain and birth weight of neonates among women in the Southwest areas of China: A prospective cohort study].

Objective: To explore the effects of both pre-gestational BMI and gestational weight gain (GWG) on the birth weight of neonates. Methods: A total of 5 395 pregnant women were selected from the Southwest areas of China (Sichuan/Yunnan/Guizhou) and were divided into groups as pre-gestational underweight, normal weight, overweight and obesity, according to the WHO Recommendation on BMI Classification. Guidelines on Pregnancy weight were adopted from the Institute of Medicine to confirm the accuracy of GWG. Multinomial logistic regression model was used to assess the associations between pregestational BMI and GWG, on the birth weight of the neonates. Results: After adjusting for related confounders, low pre-gestational BMI appeared as a risk factor for SGA (OR=1.91, 95%CI: 1.47-2.50), and was also associated with the decreased risk of LGA (OR=0.55, 95%CI: 0.47-0.66). Inadequate GWG was both associated with the increased risk of delivering SGA (OR=1.57, 95%CI: 1.21-2.03) and the decreased risk of LGA (OR=0.48, 95%CI: 0.41-0.57). Pre-gestational overweight/obesity (OR=1.85, 95%CI: 1.58-2.17) and excessive GWG (OR=1.87, 95%CI: 1.67- 2.11) were both positively associated with the risks on LGA. Data from the stratified analysis indicated that inadequate GWG was positively associated with the risk of SGA among underweight or normal weight women (all P<0.05), but not with those overweight/obese women. Conclusions: Pre-gestational BMI and GWG were important influencing factors on the birth weight of neonates. Health education programs for pregnant women should be intensified and gestational weight gain should also be reasonably under control.

Ion transport peptide (ITP) regulates wing expansion and cuticle melanism in the brown planthopper, Nilaparvata lugens.

Ion transport peptide (ITP) and its alternatively spliced homologous ITP-like (ITPL) products play important roles in various insect developmental processes. We found for the first time that alternative 5' untranslated regions (5' UTRs) of ITPL (NilluITPLs-1, -2, -3 and -4) control spatiotemporal expression in the brown planthopper, Nilaparvata lugens, as demonstrated by reverse-transcription quantitative PCR. By using an alternative 5' UTR, NilluITPL-1 was expressed exclusively in the male reproductive system, resulting in the production of the NilluITPL seminal fluid protein. Interestingly, NilluITPLs-3 and -4 were expressed exclusively in the integument, indicating a specialized function for NilluITPL during ecdysis and eclosion. We investigated the functions of NilluITP and NilluITPL using RNA interference (RNAi). We did not observe apparent phenotypes when expression of NilluITPLs was suppressed. However, when NilluITP expression was suppressed, the insect exhibited melanism and failed wing expansion, indicating that NilluITP is a neuropeptide associated with wing expansion in addition to bursicon. Additionally, in contrast to bursicon, the insects showed increased melanism when NilluITP was eliminated by RNAi. Unlike previous studies of ITP/ITPL in other species, NilluITP was very important in the control of N. lugens postecdysial behaviours but was not critical during ecdysis. Thus, the functions of ITP and ITPL are more complex in insects than previously thought.

[Detection of brain vascular diseases with CT angiography].

OBJECTIVE: To identify the diagnostic effect of spiral CT in brain vascular diseases. METHODS: Sixty four patients underwent CT angiography, including 22 patients with subarachnoid hemorrhage (SAH), 6 patients with oculomotor nerve paralysis, 5 patients with brain substance hemorrhage, 6 patients with arteriovenous malformation (AVM), 4 patients with mass or aneurysm, 5 patients with brain infarction, 16 patients with epilepsy or headache and dizzy. 8 cases also underwent digital subtraction angiography (DSA), 4 cases were performed operation in 64 cases. RESULTS: Spiral computed tomography angiography (SCTA) was all succeeded in 64 cases. 26 aneurysms and 8 AVMs were found by SCTA; in 6 of 8 cases of AVMs, their supply arteries and drainage veins were clearly displayed; SCTAs of 5 cases with substance hemorrhage were normal; in 1 of 5 cases with cerebral hemisphere infarction, its internal carotid obstruction was demonstrated by SCTA; the results of 12 SCTAs were identical with the results of their DSA or operation. CONCLUSION: SCTA is a useful non-invasive inspection method for detecting brain vascular diseases such as aneurysms and AVMs.

[CT diagnosis of hemorrhagic renal cysts].

CT signs of nineteen cases of hemorrhagic renal cysts that surgically and pathologically proved were analyzed. 8 of the 19 cases revealed as high density hemorrhagic lesion. CT signs in those 8 patients include low density rim sign, cyst immerging sign, and perirenal fascia thickening. The other 11 of 19 cases revealed as low density lesion. CT signs include thickened cyst wall and inhomogeneous density of the cystic content. The hounsfield unit of the lesion is correlated with the duration of disease. It is suggested that CT is valuable in diagnosis of high density hemorrhagic renal cysts, and it gives a clue to the diagnosis of low density hemorrhagic renal cysts.

[CT diagnosis of maxillary mucoceles].

CT signs of thirty-six cases of maxillary mucocele surgically and pathologically proved were analyzed. 20 of 36 cases revealed as low density lesion. 16 of 36 cases revealed as isodensity or high density lesion. They were morphologically classified as three types: nodular type, inflammatory type, bony defect type. Cystic morphology and fluid density within the lesion obviously indicated mucocele. Differential diagnosis should be made between mucocele and polyps, when the lesion revealed as soft tissue density. Inflammatory type need to be distinguished from maxillary inflammation. And bony defect type should be distinguished from the benign or malignant tumor of maxillary sinus. The islet sign and bone sclerosis are considered to be valuable for the differential diagnosis.

Structural analysis of chromophore-labeled disaccharides by capillary electrophoresis tandem mass spectrometry using ion trap mass spectrometry.

Disaccharides tagged with p-aminobenzoic acid (ABA) were separated by capillary electrophoresis (CE) and analyzed on-line with negative ion electrospray ionization tandem mass spectrometry (ESI/MS/MS). The formation of glycosylamine instead of reductive amination was selected as the derivatization reaction. In negative ion ESI, the glycosylamine approach provides more information on linkage and anomeric configuration than reductive amination. In CE analysis of ABA-labeled disaccharides, alpha-cyclodextrin (CD) was found to play a crucial role in the separation of linkage isomers. Although ammonium acetate/alpha-CD provided the best resolution of linkage isomers, the borate buffer was superior to alpha-CD in the separation of disaccharides with the same linkage but different anomeric configuration and/or monosaccharide composition. Both alpha-CD and borate suppressed the ion signal in ESI, and operational conditions were successfully obtained using 10 mM alpha-CD or 10 mM borate.

Structural analysis of chromophore-labeled disaccharides and oligosaccharides by electrospray ionization mass spectrometry and high-performance liquid chromatography/electrospray ionization mass spectrometry.

Disaccharides and linear oligosaccharides were labeled with p-aminobenzoic ethyl ester (ABEE) chromophore and analyzed by negative ion electrospray ionization mass spectrometry (ESIMS). The formation of glycosylamines rather than reductive amination in the labeling reaction produced many characteristic fragment ions under in source collision-induced dissociation (CID). These ions provided unambiguous assignment of the position of the glycosidic linkages. This approach was extended to the analysis of linkages and the sequence of the linkages of several linear oligosaccharides. Additionally, the anomeric configuration of ABEE-labeled 1-3-, 1-4- and 1-6-linked glucose disaccharides could be differentiated according to the relative abundance of characteristic ions. Disaccharides with the same linkage but different monosaccharide compositions could be analyzed by on-line coupling of high-performance liquid chromatography with ESIMS.

Linkage analysis of chromophore-labeled disaccharides and linear oligosaccharides by negative ion fast atom bombardment ionization and collisional-induced dissociation with B/E scanning.

Negative ion fast atom bombardment ionization in combination with collisional-induced dissociation mass spectrometry differentiates the linkage position(s) of chromophore-labeled di- and oligosaccharides. The formation of glycosylamines rather than the more popular reductive amination has been used to label the reducing end of sugars with ultraviolet or fluorescence tags. Two types of fragment ions were detected, one with the charge carried on the chromophore end and the other with the charge carried on the nonreducing terminus. These ions are essential to the determination of interglycosidic linkage and they are produced from the ring cleavage of the reducing end monosaccharide. Additionally, the anomeric configuration of the 1-4-linked residue could be assigned according to the relative abundance of the fragment ions.