Fast Interfacial Defluorination Kinetics Enables Stable Cycling of Low-Temperature Lithium Metal Batteries.

The development of low-temperature lithium metal batteries (LMBs) encounters significant challenges because of severe dendritic lithium growth during the charging/discharging processes. To date, the precise origin of lithium dendrite formation still remains elusive due to the intricate interplay between the highly reactive lithium metal anode and organic electrolytes. Herein, we unveil the critical role of interfacial defluorination kinetics of localized high-concentration electrolytes (LHCEs) in regulating lithium dendrite formation, thereby determining the performance of low-temperature LMBs. We investigate the impact of solvation structures of LHCEs on low-temperature LMBs by employing tetrahydrofuran (THF) and 2-methyltetrahydrofuran (2-MeTHF) as comparative solvents. The combination of comprehensive characterizations and theoretical simulations reveals that the THF-based LHCE featured with a strong solvation strength exhibits fast interfacial defluorination reaction kinetics, thus leading to the formation of an amorphous and inorganic-rich solid-electrolyte interphase (SEI) that can effectively suppress the growth of lithium dendrites. As a result, the highly reversible Li metal anode achieves an exceptional Coulombic efficiency (CE) of up to ∼99.63% at a low temperature of -30 °C, thereby enabling stable cycling of low-temperature LMB full cells. These findings underscore the crucial role of electrolyte interfacial reaction kinetics in shaping SEI formation and provide valuable insights into the fundamental understanding of electrolyte chemistry in LMBs.

Exercise-Induced miR-210 Promotes Cardiomyocyte Proliferation and Survival and Mediates Exercise-Induced Cardiac Protection against Ischemia/Reperfusion Injury.

Exercise can stimulate physiological cardiac growth and provide cardioprotection effect in ischemia/reperfusion (I/R) injury. MiR-210 is regulated in the adaptation process induced by exercise; however, its impact on exercise-induced physiological cardiac growth and its contribution to exercise-driven cardioprotection remain unclear. We investigated the role and mechanism of miR-210 in exercise-induced physiological cardiac growth and explored whether miR-210 contributes to exercise-induced protection in alleviating I/R injury. Here, we first observed that regular swimming exercise can markedly increase miR-210 levels in the heart and blood samples of rats and mice. Circulating miR-210 levels were also elevated after a programmed cardiac rehabilitation in patients that were diagnosed of coronary heart diseases. In 8-week swimming model in wild-type (WT) and miR-210 knockout (KO) rats, we demonstrated that miR-210 was not integral for exercise-induced cardiac hypertrophy but it did influence cardiomyocyte proliferative activity. In neonatal rat cardiomyocytes, miR-210 promoted cell proliferation and suppressed apoptosis while not altering cell size. Additionally, miR-210 promoted cardiomyocyte proliferation and survival in human embryonic stem cell-derived cardiomyocytes (hESC-CMs) and AC16 cell line, indicating its functional roles in human cardiomyocytes. We further identified miR-210 target genes, cyclin-dependent kinase 10 (CDK10) and ephrin-A3 (EFNA3), that regulate cardiomyocyte proliferation and apoptosis. Finally, miR-210 KO and WT rats were subjected to swimming exercise followed by I/R injury. We demonstrated that miR-210 crucially contributed to exercise-driven cardioprotection against I/R injury. In summary, this study elucidates the role of miR-210, an exercise-responsive miRNA, in promoting the proliferative activity of cardiomyocytes during physiological cardiac growth. Furthermore, miR-210 plays an essential role in mediating the protective effects of exercise against cardiac I/R injury. Our findings suggest exercise as a potent nonpharmaceutical intervention for inducing miR-210, which can alleviate I/R injury and promote cardioprotection.

Associations of five blood heavy metals with hepatitis B virus infection and immunity in adults: a cross-sectional study.

BACKGROUND: Heavy metal pollution has emerged as a significant concern for human health, prompting increased awareness of its potential adverse effects. While previous research has established a connection between heavy metals and liver function biomarkers, the specific relationship between heavy metals and HBV infection remains unexplored. This cross-sectional study aims to investigate the potential correlations between five blood heavy metals - lead, cadmium, mercury, manganese, and selenium - and the presence of HBsAg, HBsAb, and HBcAb in adults. METHODS: The study utilized data from NHANES 2007-2018. Participants were classified into four groups based on their infectious status, and the association between heavy metals and HBV infection was analyzed using multiple logistic regression and stratification analysis. RESULTS: A total of 8431 participants were included, with 5 436 classified as Susceptible, 1 765 as Vaccinated, 865 as Natural Infection, and 103 as Acute/Chronic HBV Infection. The Vaccinated group exhibited a lower mean age (34.52 ± 14.16 years) compared to the other groups. Statistically significant differences in heavy metal concentrations (except selenium) were observed among the groups (P < 0.001). After adjusting for covariates, lead was significantly associated with HBV infection (Q2: OR 2.37, 95%CI 1.04-5.39; Q3: OR 2.34, 95%CI 1.01-5.40), and positive trends were observed for high blood concentrations of mercury (Q4: OR 3.03, 95%CI 1.31-7.04) and manganese (Q4: OR 2.52, 95%CI 1.20-5.28). Furtherly, the presence of lead reduced the protection of HBsAb (Q2: OR 0.84, 95%CI 0.73-0.97; Q3: OR 0.77, 95%CI 0.66-0.90; Q4: OR 0.83, 95%CI 0.70-0.98). Subgroup analysis indicated that cadmium was associated with an increased risk of HBV infection in Asians (OR 1.36, 95%CI 1.03-1.78) and individuals with a BMI range of 25 to 30 (OR 1.60, 95%CI 1.17-2.18). CONCLUSIONS: The study's findings suggest a correlation between elevated blood Pb concentrations and reduced immunization rates against hepatitis B. Individuals with a positive HBsAg exhibit lower blood Se concentrations and higher blood Hg and Mn concentrations.

Identification of Parkinson's disease and multiple system atrophy using multimodal PET/MRI radiomics.

OBJECTIVES: To construct a machine learning model for differentiating Parkinson's disease (PD) and multiple system atrophy (MSA) by using multimodal PET/MRI radiomics and clinical characteristics. METHODS: One hundred and nineteen patients (81 with PD and 38 with MSA) underwent brain PET/CT and MRI to obtain metabolic images ([18F]FDG, [11C]CFT PET) and structural MRI (T1WI, T2WI, and T2-FLAIR). Image analysis included automatic segmentation on MRI, co-registration of PET images onto the corresponding MRI. Radiomics features were then extracted from the putamina and caudate nuclei and selected to construct predictive models. Moreover, based on PET/MRI radiomics and clinical characteristics, we developed a nomogram. Receiver operating characteristic (ROC) curves were performed to evaluate the performance of the models. Decision curve analysis (DCA) was employed to access the clinical usefulness of the models. RESULTS: The combined PET/MRI radiomics model of five sequences outperformed monomodal radiomics models alone. Further, PET/MRI radiomics-clinical combined model could perfectly distinguish PD from MSA (AUC = 0.993), which outperformed the clinical model (AUC = 0.923, p = 0.028) in training set, with no significant difference in test set (AUC = 0.860 vs 0.917, p = 0.390). However, no significant difference was found between PET/MRI radiomics-clinical model and PET/MRI radiomics model in training (AUC = 0.988, p = 0.276) and test sets (AUC = 0.860 vs 0.845, p = 0.632). DCA demonstrated the highest clinical benefit of PET/MRI radiomics-clinical model. CONCLUSIONS: Our study indicates that multimodal PET/MRI radiomics could achieve promising performance to differentiate between PD and MSA in clinics. CLINICAL RELEVANCE STATEMENT: This study developed an optimal radiomics signature and construct model to distinguish PD from MSA by multimodal PET/MRI imaging methods in clinics for parkinsonian syndromes, which achieved an excellent performance. KEY POINTS: •Multimodal PET/MRI radiomics from putamina and caudate nuclei increase the diagnostic efficiency for distinguishing PD from MSA. •The radiomics-based nomogram was developed to differentiate between PD and MSA. •Combining PET/MRI radiomics-clinical model achieved promising performance to identify PD and MSA.

Multi-scenario validation of the robust inversion method with biased plume range and values.

Release rate estimation is a vital means of revealing the emission process of radionuclides and assessing the environmental consequences in an emergency. Inverse modeling is widely used in emergency cases, but is vulnerable to plume biases in atmospheric dispersion modeling. One promising solution is a model called "Simultaneously Estimates the Release rate And Corrects both the plume range and Transport pattern" (SERACT). This study investigates the feasibility and behavior of SERACT based on four wind tunnel experiments replicating complex dispersion scenarios with both dense buildings and heterogeneous topography. SERACT's performance is compared with that of Tikhonov-regularized inversion and its predecessor. The results demonstrate that SERACT successfully corrects the modeled plume biases and simultaneously improves the release rate estimations in all four complex local-scale scenarios. The release rates retrieved by SERACT provide better agreement with the true release rates than those given by the other methods for all scenarios, with an average deviation of only 5.83%. After correction, the simulated plume reproduces the concentrations at all sites and achieves the best Pearson correlation coefficient (1.00) and fraction of simulations within a factor of 2 of the measurements (1.00); these values are 7.33 and 2.09 times higher, respectively, than those of simulations using release rates obtained using Tikhonov-regularized inversion.

Meta-analysis of the efficacy of invisible orthodontic appliances for maxillary molar distalization in adult patients / 口腔疾病防治

Objective@#To evaluate the clinical efficacy of invisible orthodontic appliances without brackets for the distal movement of maxillary molars to improve the ability of orthodontists to predict treatment outcomes.@*Methods@#Web of Science, Cochrane Library, Embase, PubMed, Wanfang Database, CNKI Database, and VIP Database were searched for studies investigating the efficacy of invisible orthodontic appliances for distal movement of maxillary molars in adult patients and published from database inception to August 1, 2023. A total of three researchers screened the studies and evaluated their quality and conducted a meta-analysis of those that met quality standards.@*Results@#This study included 13 pre- and postcontrol trials with a total sample size of 281 patients. The meta-analysis revealed no significant differences in the sagittal or vertical parameters of the jawbone after treatment when compared with those before treatment (P>0.05). The displacement of the first molar was MD=-2.34, 95% CI (-2.83, -1.85); the displacement was MD=-0.95, 95% CI (-1.34, -0.56); and the inclination was MD=-2.51, 95% CI (-3.56, -1.46). There was a statistically significant difference in the change in sagittal, vertical, and axial tilt of the first molar before and after treatment. After treatment, the average adduction distance of the incisors was MD=-0.82, 95% CI (-1.54, -0.09), and the decrease in lip inclination was MD=-1.61, 95% CI (-2.86, -0.36); these values were significantly different from those before treatment (P<0.05).@*Conclusion@#Invisible orthodontic appliances can effectively move the upper molars in a distal direction and control the vertical position of the molars. When the molars move further away, there is some degree of compression and distal tilt movement, which is beneficial for patients with high angles. The sagittal movement of incisors is beneficial for improving the patient's profile.

Effect of Starch on the Solubility of Quinoa Protein Isolates during Heat Treatment.

There is increasing interest in developing quinoa products due to their unique nutritional value. Starch and protein are the primary components in quinoa, and the interaction between them affects the quality of quinoa products. This study extracted the starch and protein from quinoa and simulated the thermal processing of quinoa to investigate the effects of starch on the solubility and structure of quinoa protein isolates during heat treatment. The structure of quinoa protein isolates was characterized by fluorescence spectroscopy, Fourier transform infrared spectroscopy, laser particle size analysis, and scanning electron microscopy. The results showed that starch decreased protein solubility, and the maximum solubility was obtained after heating for 5 min. After starch addition during heat treatment, the surface charge distribution of protein changed, the degree of protein aggregation increased, the particle size of proteins increased, the thermal stability increased, and the ß-sheet ratio of the proteins increased, suggesting that the protein structure is more ordered, which is the structural foundation of protein solubility decreasing. The research about the interaction between starch and protein and the effects on the solubility of protein could provide a reference for quinoa products processing.

Sustainable ultrasound-assisted extraction of Polygonatum sibiricum saponins using ionic strength-responsive natural deep eutectic solvents.

The sustainable extraction of saponins was investigated using natural deep eutectic solvents (NADESs) combined with ultrasound-assisted extraction. A novel NADES (butyric acid-urea) that was responsive to ionic strength was designed and used as the extractant. Ultrasound treatment and a catalyst ferric chloride with plant cell wall breaking function were applied to improve the extraction efficiency.Since the solubility of the NADES varied significantly with ionic strength, 95% of NADES was readily separated from the water phase after the addition of sodium chloride, while saponins remained in the water phase for easy collection. The reuse capacity of NADES, the eco-friendliness of the extraction method, and the antioxidant activity of the extract were further evaluated.NADES was continuously recovered and used to extract Polygonatum sibiricum powder: the yield of saponins did not decrease after five cycles of recovery and re-extraction. The penalty point on the "Eco-scale" suggested that the extraction method was "green" (i.e. eco-friendly).Compared with ethanol extracts, the NADES extracts showed a higher saponin concentration and antioxidant activity.The study can contribute to the sustainable and green extraction of hydrophilic active substances in the food and pharmaceutical industries.

Unraveling the Solvent Effect on Solid-Electrolyte Interphase Formation for Sodium Metal Batteries.

Ether-based electrolytes are considered as an ideal electrolyte system for sodium metal batteries (SMBs) due to their superior compatibility with the sodium metal anode (SMA). However, the selection principle of ether solvents and the impact on solid electrolyte interphase formation are still unclear. Herein, we systematically compare the chain ether-based electrolyte and understand the relationship between the solvation structure and the interphasial properties. The linear ether solvent molecules with different terminal group lengths demonstrate remarkably distinct solvation effects, thus leading to different electrochemical performance as well as deposition morphologies for SMBs. Computational calculations and comprehensive characterizations indicate that the terminal group length significantly regulates the electrolyte solvation structure and consequently influences the interfacial reaction mechanism of electrolytes on SMA. Cryogenic electron microscopy clearly reveals the difference in solid electrolyte interphase in various ether-based electrolytes. As a result, the 1,2-diethoxyethane-based electrolyte enables a high Coulombic efficiency of 99.9 %, which also realizes the stable cycling of Na||Na3 V2 (PO4 )3 full cell with a mass loading of ≈9 mg cm-2 over 500 cycles.

Three-dimensional finite element study of mandibular first molar distalization with clear aligner.

OBJECTIVES: This study aimed to construct the finite element model of the mandibular first molar with the invisible appliance and explore the dentition movement characteristics of the mandibular first molar when using micro-implant anchorage and different initial positions of the first molar. METHODS: Models of the mandible, tooth, periodontal membrane, and invisible appliance were constructed using cone beam computed tomography (CBCT) data. The two groups were divided into the non-anchorage group and the micro-implant group (between the roots of the first molar and the second molar) based on whether the elastic traction of the micro-implant was assisted or not. The two groups were divided into the following conditions based on the starting position of the first molar: Working condition 1: the distance between the first molar and the second premolar was 0 mm; working condition 2: the distance between the first molar and the second premolar was 1 mm; working condition 3: the distance between the first molar and the second premolar was 2 mm; working condition 4: the distance between the first molar and the second premolar was 3 mm. The data characte-ristics of total displacement and displacement in each direction of dentition were analyzed. RESULTS: In the non-ancho-rage group, all the other teeth showed reverse movement except for the first molar which was moved distally. Meanwhile, in the micro-implant group, except for a small amount of mesial movement of the second molar in wor-king condition 1, the whole dentition in other working conditions presented distal movement and anterior teeth showed lingual movement, among which the distal displacement of the first molar in working condition 4 was the largest. With the change of the initial position of the first molar to the distal, the movement of the first molar to the distal, the premolar to the mesial, and the anterior to the lip increased, while the movement of the second molar to the mesial decreased. CONCLUSIONS: The micro-implant can effectively protect the anterior anchorage, increase the expression rate of molar distancing, and avoid the round-trip movement of the second molar. The initial position of the first molar movement is related to the amount of distancing and the remaining tooth movement.

High-entropy Electrolyte Enables High Reversibility and Long Lifespan for Magnesium Metal Anodes.

The stable cycling of Mg-metal anodes is limited by several problems, including sluggish electrochemical kinetics and passivation at the Mg surface. In this study, we present a high-entropy electrolyte composed of lithium triflate (LiOTf) and trimethyl phosphate (TMP) co-added to magnesium bis(trifluoromethane sulfonyl)imide (Mg(TFSI)2 /1,2-dimethoxyethane (DME) to significantly improve the electrochemical performance of Mg-metal anodes. The as-formed high-entropy Mg2+ -2DME-OTf- -Li+ -DME-TMP solvation structure effectively reduced the Mg2+ -DME interaction in comparison with that observed in traditional Mg(TFSI)2 /DME electrolytes, thereby preventing the formation of insulating components on the Mg-metal anode and promoting its electrochemical kinetics and cycling stability. Comprehensive characterization revealed that the high-entropy solvation structure brought OTf- and TMP to the surface of the Mg-metal anode and promoted the formation of a Mg3 (PO4 )2 -rich interfacial layer, which is beneficial for enhancing Mg2+ conductivity. Consequently, the Mg-metal anode achieved excellent reversibility with a high Coulombic efficiency of 98 % and low voltage hysteresis. This study provides new insights into the design of electrolytes for Mg-metal batteries.

Origin of dendrite-free lithium deposition in concentrated electrolytes.

The electrolyte solvation structure and the solid-electrolyte interphase (SEI) formation are critical to dictate the morphology of lithium deposition in organic electrolytes. However, the link between the electrolyte solvation structure and SEI composition and its implications on lithium morphology evolution are poorly understood. Herein, we use a single-salt and single-solvent model electrolyte system to systematically study the correlation between the electrolyte solvation structure, SEI formation process and lithium deposition morphology. The mechanism of lithium deposition is thoroughly investigated using cryo-electron microscopy characterizations and computational simulations. It is observed that, in the high concentration electrolytes, concentrated Li+ and anion-dominated solvation structure initiate the uniform Li nucleation kinetically and favor the decomposition of anions rather than solvents, resulting in inorganic-rich amorphous SEI with high interface energy, which thermodynamically facilitates the formation of granular Li. On the contrary, solvent-dominated solvation structure in the low concentration electrolytes tends to exacerbate the solvolysis process, forming organic-rich mosaic SEI with low interface energy, which leads to aggregated whisker-like nucleation and growth. These results are helpful to tackle the long-standing question on the origin of lithium dendrite formation and guide the rational design of high-performance electrolytes for advanced lithium metal batteries.

Whole-Genome Sequencing-Based Characterization of Clinical Listeria monocytogenes Isolates in China, 2013-2019.

Invasive listeriosis is a rare but serious foodborne disease that causes maternal-neonatal, central nervous system, and bloodstream infections. The aim of this study was to assess the whole-genome sequencing (WGS)-based genetic diversity of clinical Listeria monocytogenes isolates over a 7-year period and prove the effect of WGS application in food vehicle investigation. A total of 360 isolates were recovered during 2013 and 2019 through the national listeriosis special surveillance program. Two hundred twenty-six isolates (62.8%) were associated with pregnancy. All isolates belonged to lineage I (214 isolates) or lineage II (146 isolates), with 4 serogroups (46.9% IIb, 39.7% IIa, 12.5% IVb, and 0.8% IIc). All isolates were in 25 clonal complexes (CCs) and 3 singletons, with CC87, CC8, and CC5 being the most common causes of human listeriosis. All clinical isolates were positive for Listeria pathogenicity island 1 (LIPI-1), LIPI-3 was present in 21.4% of isolates and LIPI-4 was detected in 29.2% of isolates. LIPI-4-positive isolates, including CC87, sequence type (ST)619, ST382, CC4, and CC2, have been shown to confer hypervirulence. Fifteen isolates harbored at least one antimicrobial encoding gene, including tet (M), mef (A), msr (D), and dfr (G). The sublineage designations were consistent with CC designations, and 215 distinct cgMLST types (CTs) were classified, the most abundant being CT58 and CT750. In summary, there is a high level of genetic diversity among the clinical isolates. WGS has strengthened listeriosis surveillance and will be implemented for other foodborne bacteria in the National Molecular Tracing Network for Foodborne Disease.

Lichen-Derived Actinomycetota: Novel Taxa and Bioactive Metabolites.

Actinomycetes are essential sources of numerous bioactive secondary metabolites with diverse chemical and bioactive properties. Lichen ecosystems have piqued the interest of the research community due to their distinct characteristics. Lichen is a symbiont of fungi and algae or cyanobacteria. This review focuses on the novel taxa and diverse bioactive secondary metabolites identified between 1995 and 2022 from cultivable actinomycetota associated with lichens. A total of 25 novel actinomycetota species were reported following studies of lichens. The chemical structures and biological activities of 114 compounds derived from the lichen-associated actinomycetota are also summarized. These secondary metabolites were classified into aromatic amides and amines, diketopiperazines, furanones, indole, isoflavonoids, linear esters and macrolides, peptides, phenolic derivatives, pyridine derivatives, pyrrole derivatives, quinones, and sterols. Their biological activities included anti-inflammatory, antimicrobial, anticancer, cytotoxic, and enzyme-inhibitory actions. In addition, the biosynthetic pathways of several potent bioactive compounds are summarized. Thus, lichen actinomycetes demonstrate exceptional abilities in the discovery of new drug candidates.

Ada2 and Ada3 Regulate Hyphal Growth, Asexual Development, and Pathogenicity in Beauveria bassiana by Maintaining Gcn5 Acetyltransferase Activity.

The histone acetyltransferase (HAT) Gcn5 ortholog is essential for a variety of fungi. Here, we characterize the roles of Ada2 and Ada3, which are functionally linked to Gcn5, in the insect-pathogenic fungus Beauveria bassiana. Loss of Ada2 and Ada3 led to severe hyphal growth defects on rich and minimal media and drastic decreases in blastospore yield and conidiation capacity, with abnormal conidia-producing structures. ΔAda2 and ΔAda3 exhibited a delay in conidial germination and increased sensitivity to multiple chemical stresses and heat shock. Nearly all their pathogenicity was lost, and their ability to secrete extracellular enzymes, Pr1 proteases and chitinases for cuticle degradation was reduced. A yeast two-hybrid assay demonstrated that Ada2 binds to Ada3 and directly interacts with Gcn5, confirming the existence of a yeast-like Ada3-Ada2-Gcn5 HAT complex in this fungus. Additionally, deletion of the Ada genes reduced the activity of Gcn5, especially in the ΔAda2 strain, which was consistent with the acetylation level of histone H3 determined by Western blotting. These results illustrate the dependence of Gcn5 enzyme activity on Ada2 and Ada3 in fungal hyphal growth, asexual development, multiple stress responses, and pathogenicity in B. bassiana. IMPORTANCE The histone acetyltransferase Gcn5 ortholog contributes significantly to the growth and development of various fungi. In this study, we found that Ada2 and Ada3 have critical regulatory effects on Gcn5 enzyme activity and influence the acetylation of histone H3. Deletion of Ada2 or Ada3 decreased the fungal growth rate and asexual conidial yield and increased susceptibility to multiple stresses in Beauveria bassiana. Importantly, Ada genes are vital virulence factors, and their deletion caused the most virulence loss, mainly by inhibiting the activity of a series of hydrolytic enzymes and the dimorphic transition ability. These findings provide a new perspective on the function of the Gcn5 acetyltransferase complex in pathogens.

Study on Shear Behavior and Failure Characteristics of Bolted Anisotropic Rock Joints.

Anisotropic discontinuity exists widely in rock masses of mines, tunnels, slopes, water conservancy and hydropower projects. The shear characteristics of bolted anisotropic rock joints are extremely important for the stability design of engineering rock mass. However, few scholars have studied the bolted anisotropic rock joint. The different rock properties on both sides of the rock joint, especially the different rock strengths, will greatly affect the deformation characteristics and failure mode of the rock mass. Based on this, a series of shear tests were carried out on the bolted anisotropic rock joint under different normal stresses, and the characteristics of shear stress-shear displacement curve, shear strength, failure characteristics of the rock joint and deformation characteristics of the bolt are discussed. λ is defined as the strength ratio of upper and lower rock on the structural surface. The results show that the effect of λ on the shear stress-shear displacement curve is not obvious at the pre-fracture stage. The shear stress-shear displacement curve at the pre-breaking stage of the bolt presents a softening stage when the normal stress is equal to 0.5 MPa, tends to be horizontal when the normal stress is equal to 1 MPa and presents a hardening stage when the normal stress is greater than 1 MPa. After the bolt is broken, the shear stress-shear displacement curve presents a stepped-down descent. With the increase in λ, the breaking shear stress of the bolt increases. Elliptic failure occurs on the surface of the bolted anisotropic rock joint, and the length of the major axis of the ellipse decreases with the increase in λ value and normal stress. The bolts with different λ values of anisotropic rock joint show "Z-shaped" tensile bending deformation characteristics after shear fracture, and the horizontal and vertical components of the bolt deformation decrease with the increase in λ value and normal stress. The fracture shear displacement of the bolt increases with the increase in normal stress and decreases with the increase in λ value. The research results are helpful to further understand the shear mechanical characteristics and differences of bolted rock joints and provide a reference for solving the engineering problems of the composite layered rock mass.

Three Chitin Deacetylase Family Members of Beauveria bassiana Modulate Asexual Reproduction and Virulence of Fungi by Mediating Chitin Metabolism and Affect Fungal Parasitism and Saprophytic Life.

As an important chitin-modifying enzyme, chitin deacetylase (CDA) has been characterized in many fungi, but its function in the entomopathogenic fungus Beauveria bassiana remains unclear. Three CDAs with conserved domains of the carbohydrate esterase 4 (CE-4) family were identified in B. bassiana. Disruption of CDA1 resulted in growth restriction of the fungus on medium with chitin as a carbon source or without a carbon source. Deletion of CDA1 and CDA2 led to defects in fungal conidial formation and conidial vitality compared with those of the wild type (WT), and the conidial yield decreased by 25.81% to 47.68%. Inactivation of three CDA genes resulted in a decrease of 20.23% to 27% in the blastospore yield. ΔCDA1 and ΔCDA3 showed 29.33% and 23.34% reductions in cuticular infection virulence, respectively. However, the CDA family may not contribute to hemocoel infection virulence. Additionally, the sporulation of the insect carcass showed that the three gene deletion mutants were 68.45%, 63.84%, and 56.65% less than WT. Penetration experiments with cicada wings and enzyme activity assays were used to further explore the effect of the fungus on chitin metabolism after gene deletion. Although the three gene deletion mutants penetrated the cicada wings successfully and continued to grow on the underlying medium, their colony sizes were reduced by 29.12% to 47.76%. The CDA enzyme activity of ΔCDA1 and ΔCDA3 decreased by 84.76% and 83.04%, respectively. These data showed that members of the CDA family play a different role in fungal growth, conidial quality, and virulence. IMPORTANCE In this study, we report the roles of CDA family in entomopathogenic fungus B. bassiana. Our results indicated that CDA modulates asexual development and regulates fungal virulence by altering chitin deacetylation and metabolic capacity. CDA affected the biological control potential and life history of B. bassiana by affecting its parasitic and saprophytic life. These findings provide novel insights into the roles of multiple CDA paralogues existing in fungal biocontrol agents.

Identification and analysis of miRNAs differentially expressed in male and female Trichosanthes kirilowii maxim.

Trichosanthes kirilowii Maxim. (TK) is a dioecious plant in the Cucurbitaceae family of which different sexes have separate medicinal uses. We used Illumina high-throughput sequencing technology to sequence miRNAs from male and female flower buds of TK. We performed bioinformatics analysis, miRNA identification, and target gene prediction on the data obtained from sequencing, and association analysis was performed in combination with the results of a previous transcriptome sequencing study. As a result, there were 80 differentially expressed miRNAs (DESs) between the female and male plants (48 upregulated and 32 downregulated in female plants). Moreover, 27 novel miRNAs in DESs were predicted to have 282 target genes, and 51 known miRNAs were predicted to have 3418 target genes. By establishing a regulatory network between miRNAs and target genes, 12 core genes were screened, including 7 miRNAs and 5 target genes. Among them, tkmiR157a-5p, tkmiR156c, tkmiR156_2, and tkmiR156k_2 jointly target the regulation of tkSPL18 and tkSPL13B. These two target genes are specifically expressed in male and female plants, respectively, and are involved in the biosynthesis process of BR, which is closely related to the sex differentiation process of TK. The identification of these miRNAs will provide a reference for the analysis of the sex differentiation mechanism of TK.

Recent Progress in Rechargeable Sodium Metal Batteries: A Review.

Sodium metal batteries (SMBs) have been widely studied owing to their relatively high energy density and abundant resources. However, they still need systematic improvement to fulfill the harsh operating conditions for their commercialization. In this review, we summarize the recent progress in SMBs in terms of sodium anode modification, electrolyte exploration, and cathode design. Firstly, we give an overview of the current challenges facing Na metal anodes and the corresponding solutions. Then, the traditional liquid electrolytes and the prospective solid electrolytes for SMBs are summarized. In addition, insertion- and conversion-type cathode materials are introduced. Finally, an outlook for the future of practical SMBs is provided.

Phase-Dislocation-Mediated High-Dimensional Fractional Acoustic-Vortex Communication.

With unlimited topological modes in mathematics, the fractional orbital angular momentum (FOAM) demonstrates the potential to infinitely increase the channel capacity in acoustic-vortex (AV) communications. However, the accuracy and stability of FOAM recognition are still limited by the nonorthogonality and poor anti-interference of fractional AV beams. The popular machine learning, widely used in optics based on large datasets of images, does not work in acoustics because of the huge engineering of the 2-dimensional point-by-point measurement. Here, we report a strategy of phase-dislocation-mediated high-dimensional fractional AV communication based on pair-FOAM multiplexing, circular sparse sampling, and machine learning. The unique phase dislocation corresponding to the topological charge provides important physical guidance to recognize FOAMs and reduce sampling points from theory to practice. A straightforward convolutional neural network considering turbulence and misalignment is further constructed to achieve the stable and accurate communication without involving experimental data. We experimentally present that the 32-point dual-ring sampling can realize the 10-bit information transmission in a limited topological charge scope from ±0.6 to ±2.4 with the FOAM resolution of 0.2, which greatly reduce the divergence in AV communications. The infinitely expanded channel capacity is further verified by the improved FOAM resolution of 0.025. Compared with other milestone works, our strategy reaches 3-fold OAM utilization, 4-fold information level, and 5-fold OAM resolution. Because of the extra advantages of high dimension, high speed, and low divergence, this technology may shed light on the next-generation AV communication.