Axially Growing Carbon Quantum Ribbon with 2D Stacking Control for High-Stability Solar Cell.

Although power conversion efficiency (PCE) of solar cells (SCs) continues to improve, they are still far from practical application because of their complex synthesis process, high cost and inferior operational stability. Carbon quantum dots with high material stability and remarkable photoluminescence are successfully used in light-emitting diodes. A good light emitter should also be an efficient SC according to the photon balance in Shockley-Quieisser formulation, in which all excitons are ultimately separated. However, the finite quantum-sized sp2 domain leads to tight exciton bonding, and highly delocalized electron clouds in irregular molecular stacks form disordered charge transfer, resulting in severe energy loss. Herein, an axially growing carbon quantum ribbon (AG-CQR) with a wide optical absorption range of 440-850 nm is reported. Structural and computational studies reveal that AG-CQRs (aspect ratio ≈2:1) with carbonyl groups at both ends regulate energy level and efficiently separate excitons. The stacking-controlled two-dimensional AG-CQR film further directionally transfers electrons and holes, particularly in AB stacking mode. Using this film as active layer alone, the SCs yield a maximum PCE of 1.22%, impressive long-term operational stability of 380 h, and repeatability. This study opens the door for the development of new-generation carbon-nanomaterial-based SCs for practical applications.

Onion-like multicolor thermally activated delayed fluorescent carbon quantum dots for efficient electroluminescent light-emitting diodes.

Carbon quantum dots are emerging as promising nanomaterials for next-generation displays. The elaborate structural design is crucial for achieving thermally activated delayed fluorescence, particularly for improving external quantum efficiency of electroluminescent light-emitting diodes. Here, we report the synthesis of onion-like multicolor thermally activated delayed fluorescence carbon quantum dots with quantum yields of 42.3-61.0%. Structural, spectroscopic characterization and computational studies reveal that onion-like structures assembled from monomer carbon quantum dots of different sizes account for the decreased singlet-triplet energy gap, thereby achieving efficient multicolor thermally activated delayed fluorescence. The devices exhibit maximum luminances of 3785-7550 cd m-2 and maximum external quantum efficiency of 6.0-9.9%. Importantly, owing to the weak van der Waals interactions and adequate solution processability, flexible devices with a maximum luminance of 2554 cd m-2 are realized. These findings facilitate the development of high-performance carbon quantum dots-based electroluminescent light-emitting diodes that are promising for practical applications.

Wet Chemical Synthesis of Ultrathin γ-Ga2O3 Quantum Wires Enabling Far-UVC Photodetection with Ultrahigh Selectivity and Sensitivity.

As compared to solar-blind ultraviolet (UV) photodetectors (PDs), far-UVC PDs not only show some irreplaceable advantages but also are more challenging to be developed. To solve this challenge, we report herein a soft template-assisted solvothermal route to synthesize ultrathin γ-Ga2O3 quantum wires (UQWs) with diameters down to 1-2 nm. These UQWs all exhibit a cluster-like absorption feature with a strong peak located between 190 and 230 nm and an edge below 250 nm, allowing highly selective absorption to far-UVC light. Notably, their normalized absorption coefficients were experimentally and theoretically confirmed to increase obviously with decreasing their diameters. Self-powered photoelectrochemical-type PDs based on Ga2O3 QWs of 1.7 nm diameter were therefore fabricated, exhibiting an excellent far-UVC detection performance with an unprecedented ultrahigh spectral selectivity (R210 nm/R250 nm = 452). As a proof of concept, this paper offers a new idea for developing ultrawide bandgap semiconductor materials and devices by leveraging a strong quantum confinement effect.

A comparison of interferential current efficacy in elderly intervertebral disc degeneration patients with or without sarcopenia: a retrospective study.

BACKGROUND: Intervertebral disc degeneration and sarcopenia are both age-related diseases without effective treatments. Their comorbidities may worsen the prognosis, and further studies on interaction and therapy are needed. The purpose of the study was to investigate the prevalence of sarcopenia in intervertebral disc degeneration, and to compare the characteristics of intervertebral disc degeneration with and without sarcopenia and effects of interferential current. METHODS: One hundred twenty disc degeneration patients were included from 2021 to 2022 in a single institute. Medical records, examination results and radiological reports were reviewed. Patients with sarcopenia were screened and grouped according to Asian Working Group for Sarcopenia 2019. VAS, ODI, SARC-F, SMI, gait speed (GS), grip strength, disc Pfirrmann grading, standard cross-sectional area (SCSA), degree of fatty infiltration (DFF), and nerve conduction velocity (NCV) were assessed before and after treatment. RESULTS: The prevalence of sarcopenia in intervertebral disc degeneration was 28.3%. The difference of VAS, ODI, disc Pfirrmann grading, SCSA, DFF and NCV between two groups were significant before intervention (P < 0.05), SCSA and DFF were related to the degree of disc degeneration. The improvement of SMI, GS, grip strength, VAS, SARC-F and ODI in intervertebral disc degeneration with sarcopenia group was significant after intervention, as well as SMI, GS, grip strength, VAS and ODI in those without sarcopenia (P < 0.05). The improvement of grip strength, GS, ODI and SARC-F in intervertebral disc degeneration with sarcopenia group were greater than the one without sarcopenia (P < 0.05), whereas there was no significance in improvement degree of other indicators between the two groups (P > 0.05). CONCLUSION: The prevalence of sarcopenia was high in intervertebral disc degeneration, and paravertebral muscles degeneration correlated with the degree of disc degeneration. Compared to those without sarcopenia, intervertebral disc degeneration patients with sarcopenia have more severe pain, poorer mobility and neurological function. Interferential current is effective in intervertebral disc degeneration patients and sarcopenia patients.

Perspectives on Development of Optoelectronic Materials in Artificial Intelligence Age.

Optoelectronic devices, such as light-emitting diodes, have been demonstrated as one of the most demanded forthcoming display and lighting technologies because of their low cost, low power consumption, high brightness, and high contrast. The improvement of device performance relies on advances in precisely designing novelty functional materials, including light-emitting materials, hosts, hole/electron transport materials, and yet which is a time-consuming, laborious and resource-intensive task. Recently, machine learning (ML) has shown great prospects to accelerate material discovery and property enhancement. This review will summarize the workflow of ML in optoelectronic materials discovery, including data collection, feature engineering, model selection, model evaluation and model application. We highlight multiple recent applications of machine-learned potentials in various optoelectronic functional materials, ranging from semiconductor quantum dots (QDs) or perovskite QDs, organic molecules to carbon-based nanomaterials. We furthermore discuss the current challenges to fully realize the potential of ML-assisted materials design for optoelectronics applications. It is anticipated that this review will provide critical insights to inspire new exciting discoveries on ML-guided of high-performance optoelectronic devices with a combined effort from different disciplines.

Highly Efficient Loading of Procaine on Water-Soluble Carbon Dots toward Long-Acting Anesthesia.

Safe and efficient local anesthetic delivery carriers are crucial for long-term anesthesia and analgesics in clinical treatment. But currently, most of the local anesthetic carriers still have some disadvantages such as low drug-loading capacity, drug leakage, and potential side effects. Here, we report red-emissive carbon dots (Cys-CDs) synthesized by choosing cysteine and citric acid as precursors, which contain a large and intact sp2-domain with rich hydrophilic groups around the edge. The special structure of Cys-CDs is conducive to the efficient loading of procaine (PrC) via strong π-π stacking interactions. Based on the strong noncovalent interactions between them, the PrC loaded on Cys-CDs achieved slow release in vitro and had a long-lasting nerve blocking effect in vivo, which is 4-fold more than that of free PrC. More importantly, PrC/Cys-CDs do not cause any toxicity and inflammation during treatment owing to slow release of PrC and good water solubility of Cys-CDs, thus demonstrating the potential clinical application of CDs in long-lasting analgesia.

Risk factors of instrumentation failure after laminectomy and posterior cervical fusions (PCF).

BACKGROUND: For patients with multilevel degenerative cervical myelopathy, laminectomy and posterior cervical fusions (PCF) with instrumentation are widely accepted techniques for symptom relief. However, hardware failure is not rare and results in neck pain or even permanent neurological lesions. There are no in-depth studies of hardware-related complications following laminectomy and PCF with instrumentation. METHODS: The present study was a retrospective, single centre, observational study. Patients who underwent laminectomy and PCF with instrumentation in a single institution between January 2019 and January 2021 were included. Patients were divided into hardware failure and no hardware failure group according to whether there was a hardware failure. Data, including sex, age, screw density, end vertebra (C7 or T1), cervical sagittal alignment parameters (C2-C7 cervical lordosis, C2-C7 sagittal vertical axis, T1 slope, Cervical lordosis correction), regional Hounsfield units (HU) of the screw trajectory and osteoporosis status, were collected and compared between the two groups. RESULTS: We analysed the clinical data of 56 patients in total. The mean overall follow-up duration was 20.6 months (range, 12-30 months). Patients were divided into the hardware failure group (n = 14) and no hardware failure group (n = 42). There were no significant differences in the general information (age, sex, follow-up period) of patients between the two groups. The differences in fusion rate, fixation levels, and screw density between the two groups were not statistically significant (p > 0.05). The failure rate of fixation ending at T1 was lower than that at C7 (9% vs. 36.3%) (p = 0.019). The regional HU values of the pedicle screw (PS) and lateral mass screw (LMS) in the failure group were lower than those in the no failure group (PS: 267 ± 45 vs. 368 ± 43, p = 0.001; LMS: 308 ± 53 vs. 412 ± 41, p = 0.001). The sagittal alignment parameters did not show significant differences between the two groups before surgery or at the final follow-up (p > 0.05). The hardware failure rate in patients without osteoporosis was lower than that in patients with osteoporosis (14.3% vs. 57.1%) (p = 0.001). CONCLUSIONS: Osteoporosis, fixation ending at C7, and low regional HU value of the screw trajectory were the independent risk factors of hardware failure after laminectomy and PCF. Future studies should illuminate if preventive measures targeting these factors can help reduce hardware failure and identified more risk factors, and perform long-term follow-up.

Myth or fact: 3D-printed off-the-shelf prosthesis is superior to titanium mesh cage in anterior cervical corpectomy and fusion?

BACKGROUND: To find out if three-dimensional printing (3DP) off-the-shelf (OTS) prosthesis is superior to titanium mesh cages in anterior cervical corpectomy and fusion (ACCF) when treating single-segment degenerative cervical spondylotic myelopathy (DCSM). METHODS: DCSM patients underwent ACCF from January 2016 to January 2019 in a single center were included. Patients were divided into the 3DP group (28) and the TMC group (23). The hospital stays, operation time, intraoperative blood loss, and the cost of hospitalization were compared. The Japanese Orthopedic Association (JOA) scores and Neck Disability Index (NDI) were recorded pre-operatively, 1 day, 3, 6, 12, and 24 months post-operatively. Radiological data was measured to evaluate fusion, subsidence, and cervical lordosis. Patients were sent with SF-36 to assess their health-related quality of life (HRQoL). RESULTS: The differences in operative time, intraoperative blood loss, and hospital stay were not statistically significant between groups (p > 0.05). Postoperative dysphagia occurred in 2 cases in the 3DP group and 3 cases in the TMC group, which all relieved one week later. The difference in improvement of JOA and NDI between the two groups was not statistically significant (p > 0.05). No hardware failure was found and bony fusion was achieved in all cases except one in the 3DP group. The difference in cervical lordosis (CL), fused segmental angle (FSA), mean vertebral height (MVH), and subsidence rates between groups at each follow-up time point was not statistically significant and the results of the SF-36 were similar (p > 0.05). The total cost was higher in the 3DP group with its higher graft cost (p < 0.05). CONCLUSION: In treating single-segment DCSM with ACCF, both 3DP OTS prosthesis and TMC achieved satisfactory outcomes. However, the more costly 3DP OTS prosthesis was not able to reduce subsidence as it claimed.

Spinal infection after vertebral augmentation: a covert complication with serious havoc.

INTRODUCTION: Vertebral augmentation, including percutaneous vertebroplasty (PVP) or kyphoplasty (PKP), is the current least invasive surgical option and has been widely used to treat the painful osteoporotic vertebral compression fractures (OVCF). However, the postoperative infections could be life-threatening, even though they rarely occur. Our studies aim to clarify the causation and outcomes of spinal infections following augmentation and meanwhile to identify the risk factors. METHODS: A retrospective study was conducted on patients with OVCF who underwent PVP or PKP, and were subsequently admitted to our institution with postoperative spinal infection between January 2010 and December 2022. A total of 33 patients were finally included. RESULTS: The rate of spinal infection after augmentation in our single institute was 0.05% (2/3893). In addition to these 2 patients, the remaining 31 were referred from other hospitals. All 33 patients exhibited elevated inflammatory parameters, 14 patients presented with fever, and 9 patients experienced neurological deficits. Additionally, 29 patients had comorbidity and risk factors. Pathogens were identified in 26 patients, while only 7 patients were examined as culture negative. 27 patients underwent revision surgery and 6 patients only received conservative therapy. Anterior surgery was performed in 2 patients, while posterior surgery was performed in 20 patients. A combined anterior-posterior surgery was performed in 5 patients. At the final follow-up, 18 patients had unrestricted mobility, 10 patients required assistance from crutches or a walker for ambulation, 4 patients needed a wheelchair, and 1 patients died after revision surgery. CONCLUSIONS: Spinal infection after vertebral augmentation is rare, but it cannot be ignored. Surgeons should make every effort to detect the potential preoperative spondylitis or discitis. Once postoperative spinal infection is confirmed, a prompt intravenous antibiotic therapy is warranted. If medication therapy fails, revision surgery involving debridement and spinal reconstruction should be considered.

The emergence and prospects of carbon dots with solid-state photoluminescence for light-emitting diodes.

The significant features of carbon dots (CDs), such as bright and tunable photoluminescence, high thermal stability, and low toxicity, endow them with tremendous potential for application in next generation optoelectronics. Despite great progress achieved in the design of high-performance CDs so far, the practical applications in solid-state lighting and displays have been retarded by the aggregation-caused quenching (ACQ) effect ascribed to direct π-π interactions. This review provides a comprehensive overview of the recent progress made in solid-state CD emitters, including their synthesis, optical properties and applications in light-emitting diodes (LEDs). Their triplet-excited-state-involved properties, as well as their recent advances in phosphor-converted LEDs and electroluminescent LEDs, are mainly reviewed here. Finally, the prospects and challenges of solid-state CD-based LEDs are discussed with an eye on future development. We hope that this review will provide critical insights to inspire new exciting discoveries on solid-state CDs from both fundamental and practical standpoints so that the realization of their potential in optoelectronic areas can be facilitated.

Predicting thoracic kyphosis morphology and the thoracolumbar inflection point determined by individual lumbar lordosis in asymptomatic adults.

PURPOSE: The aims of this study were to explore the correlations between thoracic kyphosis (TK) and lumbar lordosis (LL) parameters and to build corresponding linear regressions to predict TK morphology and the thoracolumbar inflection point (IP) determined by individual LL parameters in asymptomatic adults. METHODS: A total of 280 adult healthy volunteers were recruited, and full-spine X-rays were performed for each subject in a standing posture. The following sagittal parameters were measured: cumulative TK, LL, proximal LL (PLL), the apices of TK (TKA) and LL (LLA), the IP and the distance from the plumb line of the thoracic apex (TAPL) and the lumbar apex (LAPL) to the gravity line. The correlations between TK and LL parameters were analyzed, and the corresponding linear regressions were conducted. RESULTS: Extensive variations existed in TK alignment, including angular and morphological parameters. In addition, there were statistical correlations of all cumulative TK angles with LL (r values from - 0.173 to - 0.708) and PLL (r values from - 0.206 to - 0.803), TKA and IP with LLA (rs = 0.359 and 0.582, respectively) and TAPL with LAPL (rs = 0.335). The common predictive formulas employed in ASD surgery could include T10-L1 = - 3.6-0.2*LL (R2 = 0.201), T4-L1 = 3.4-0.5*LL (R2 = 0.457), TKA = - 10.3 + 1.1*LLA (R2 = 0.180) and IP = - 12.7 + 1.6*LLA (R2 = 0.330). CONCLUSION: There were intimate associations between TK and LL parameters in asymptomatic adults. Moreover, predictive models for thoracic alignment, particularly cumulative TK, based on LL parameters were proposed, which could better delineate anatomical relationships, guide thoracic construction during adult spinal deformity surgery and may help preventing proximal junctional failure.

Valence-Engineered Oxidase-Mimicking Nanozyme with Specificity for Aromatic Amine Oxidation and Identification.

Oxidase-mimicking nanozymes with specificity for catalyzing oxidation of aromatic amines are of great significance for recognition of aromatic amines but rarely reported. Herein, Cu-A nanozyme (synthesized with Cu2+ as a node and adenine as a linker) could specifically catalyze oxidation of o-phenylenediamine (OPD) in Britton-Robinson buffer solution. Such a specific catalytic performance was also corroborated with other aromatic amines, such as p-phenylenediamine (PPD), 1,5-naphthalene diamine (1,5-NDA), 1,8-naphthalene diamine (1,8-NDA), and 2-aminoanthracene (2-AA). Moreover, the presence of salts (1 mM NaNO2, NaHCO3, NH4Cl, KCl, NaCl, NaBr, and NaI) greatly mediated the catalytic activity with the order of NaNO2 < blank ≈ NaHCO3 < NH4Cl ≈ KCl ≈ NaCl < NaBr < NaI, which was due to anions sequentially increasing interfacial Cu+ content via anionic redox reaction, while the effect of cations was negligible. With the increased Cu+ content, Km decreased and Vmax increased, indicating valence-engineered catalytic activity. Based on high specificity and satisfactory activity, a colorimetric sensor array with NaCl, NaBr, and NaI as sensing channels was constructed to identify five representative aromatic amines (OPD, PPD, 1,5-NDA, 1,8-NDA, and 2-AA) as low as 50 µM, quantitatively analyze single aromatic amine (with OPD and PPD as model analysts), and even identify 20 unknown samples with an accuracy of 100%. In addition, the performance was further validated through accurately recognizing various concentration ratios of binary, ternary, quaternary, and quinary mixtures. Finally, the practical applications were demonstrated by successfully discriminating five aromatic amines in tap, river, sewage, and sea water, providing a simple and feasible assay for large-scale scanning aromatic amine levels in environmental water samples.

The CYP2E1 inhibitor Q11 ameliorates LPS-induced sepsis in mice by suppressing oxidative stress and NLRP3 activation.

Sepsis is an infection-induced, multi-organ system failure with a pathophysiology related to inflammation and oxidative stress. Increasing evidence indicates that cytochrome P450 2E1 (CYP2E1) is involved in the incidence and development of inflammatory diseases. However, a role for CYP2E1 in lipopolysaccharide (LPS)-induced sepsis has not been completely explored. Here we use Cyp2e1 knockout (cyp2e1-/-) mice to determine if CYP2E1 could be a therapeutic target for sepsis. We also evaluated the ability of Q11, a new specific CYP2E1 inhibitor, to prevent and ameliorate LPS-induced sepsis in mice and in LPS-treated J774A.1 and RAW264.7 cells. Cyp2e1 deletion significantly reduced hypothermia, multi-organ dysfunction and histological abnormalities in LPS-treated mice; consistent with this finding, the CYP2E1 inhibitor Q11 significantly prolonged the survival time of septic mice and ameliorated multi-organ injury induced by LPS. CYP2E1 activity in liver correlated with indicators of multi-organ injury, such as the level of lactate dehydrogenase (LDH) and blood urea nitrogen (BUN) (P < 0.05). Q11 significantly suppressed the expression of NLRP3 in tissues after LPS injection; in vitro studies revealed that activation of NLRP3 signaling and increase of ROS was attenuated by Q11 in LPS-stimulated macrophages, which was reflected by reduced expression of caspase-1 and formation of ASC specks. Overall, our results indicate that Q11 improves the survival of mice with LPS-induced sepsis and attenuates sepsis-induced multiple-organ injury, suggesting that CYP2E1 could be a therapeutic target for sepsis.

Myoblast-derived exosomal Prrx2 attenuates osteoporosis via transcriptional regulation of lncRNA-MIR22HG to activate Hippo pathway.

BACKGROUND: Sarcopenia and osteoporosis are common diseases that predominantly affect older individuals. The interaction between muscle and skeleton exerts pivotal roles in bone remodeling. This study aimed to explore the function of myoblast-derived exosomal Prrx2 in osteogenic differentiation and its potential mechanisms. METHODS: Exosomes were isolated from myogenic differentiated C2C12 cells. qRT-PCR and Western blotting were used to determine target molecule expression. Osteogenic differentiation of BMSCs was evaluated by Alizarin red staining, ALP activity and levels of OCN, OPN, RUNX2, and BMP2. Dual-luciferase reporter assay, RIP, and ChIP assays were performed to verify the interaction between molecules. The nuclear translocation of YAP1 was observed by immunofluorescence staining. In vivo osteoporotic model was established by ovariectomy in mice. Bone loss was examined using HE staining. RESULTS: Prrx2 expression was elevated in myogenic differentiated C2C12 cells and their exosomes. Myoblast-derived exosomal Prrx2 enhanced osteogenic differentiation of BMSCs. Delivering exosomal Prrx2 directly bond to MIR22HG promoter and promoted its transcription and expression. MIR22HG enhanced expression and nuclear translocation of YAP via sponging miR-128, thus facilitating BMSC osteogenic differentiation. Knockdown of exosomal Prrx2 suppressed osteogenic differentiation, which could be abolished by MIR22HG overexpression. Similarly, miR-128 inhibitor or YAP overexpression reversed the inhibitory effect of MIR22HG depletion or miR-128 mimics on osteogenic differentiation. Finally, myoblast-derived exosomal Prrx2 alleviated osteoporosis in mice via up-regulating MIR22HG and activating the Hippo pathway. CONCLUSION: Myoblast-derived exosomal Prrx2 contributes to transcriptional activation of MIR22HG to activate YAP pathway via sponging miR-128, thereby facilitating osteogenic differentiation of BMSCs.

Carbon Dots for Electroluminescent Light-Emitting Diodes: Recent Progress and Future Prospects.

Carbon dots (CDs), as emerging carbon nanomaterials, have been regarded as promising alternatives for electroluminescent light-emitting diodes (LEDs) owing to their distinct characteristics, such as low toxicity, tuneable photoluminescence, and good photostability. In the last few years, despite remarkable progress achieved in CD-based LEDs, their device performance is still inferior to that of well-developed organic, heavy-metal-based QDs, and perovskite LEDs. To better exploit LED applications and boost device performance, in this review, a comprehensive overview of currently explored CDs is presented, focusing on their key optical characteristics, which are closely related to the structural design of CDs from their carbon core to surface modifications, and to macroscopic structural engineering, including the embedding of CDs in the matrix or spatial arrangement of CDs. The design of CD-based LEDs for display and lighting applications based on the fluorescence, phosphorescence, and delayed fluorescence emission of CDs is also highlighted. Finally, it is concluded with a discussion regarding the key challenges and plausible prospects in this field. It is hoped that this review inspires more extensive research on CDs from a new perspective and promotes practical applications of CD-based LEDs in multiple directions of current and future research.

Carbon Quantum Dots with Near-Unity Quantum Yield Bandgap Emission for Electroluminescent Light-Emitting Diodes.

Carbon quantum dots (CQDs) feature bright and tunable photoluminescence, solution processability, and low toxicity, showing great potential in optoelectronics. However, the large-scale synthesis of CQDs with near-unity photoluminescence quantum yield (PLQY) has not been achieved so far. In this study, we perform radical-assisted synthesis of hexagon-shaped CQDs (H-CQDs) delivering near-unity PLQY (96 %). Experimental and theoretical analyses revealed that the large vertically oriented transition dipole moment of H-CQDs originating from high symmetry results in nearly 100 % PLQY. The H-CQDs also exhibited a high electron mobility of up to 0.07 cm2  V-1 s-1 . These properties enable the H-CQD-based light-emitting diodes with a high external quantum efficiency of 4.6 % and a record maximum brightness of over 11 000 cd m-2 . This study represents a significant advance that CQDs-based electroluminescent device can be utilized for potential display and lighting applications.

Evaluation and prediction method of railway passenger long-term vibration comfort under complex operating conditions.

Vibration contributes large increases in railway passenger discomfort during long-term sitting. Discomfort caused by vibration may differ in different operation conditions. This paper conducted field measurements to investigate the interrelationships between the three. Participants completed a 240-min train journey with their whole-body vibration, subjective comfort ratings and train operating parameters being recorded. A large correlation was observed between the estimated vibration dose value and subjective comfort. The relationship that vibration magnitude significantly increases with increasing the train speed and tunnel density was also found and quantified. A vibration exposure limit of 2.08 m/s1.75 corresponding to the boundary between subjective ratings of comfortable and discomfortable was obtained. Based on the exposure limit and the quantified relationship, a vibration comfort prediction method that can calculate the passenger's maximum tolerance time under a given operation condition was proposed and may help in determining the optimal operating speed and tunnels distribution to alleviate vibration discomfort. Practitioner summary: Similar to the guide to effect of vibration on health in current standard, a vibration exposure limit regarding comfort was provided for reference when assessing long-term vibration comfort. Meanwhile, a prediction method was proposed for determining the best train operating speed and tunnels distribution, thereby alleviating railway passengers' vibration discomfort.

SPTLC2 ameliorates chondrocyte dysfunction and extracellular matrix metabolism disturbance in vitro and in vivo in osteoarthritis.

Disturbances in chondrocyte extracellular matrix (ECM) metabolism in osteoarthritis (OA) are a major cause of OA and potentially lead to personal disability, placing a huge burden on society. Chondrocyte apoptosis and ECM catabolism have a major role in the OA process. Firstly, bioinformatics analysis was performed to screen differentially expressed genes (DEGs) in OA, and serine palmitoyltransferase subunit 2 (SPTLC2) was chosen, which had high-level expression in the OA cartilage tissues and OA chondrocytes. Overexpression and knockdown of SPTLC2 were achieved in OA chondrocytes and normal chondrocytes respectively to study the effect of SPTLC2 upon ECM metabolism of chondrocytes. Cell viability and apoptosis were measured using MTT and flow cytometry analyses; SPTLC2 overexpression enhanced the OA chondrocyte viability and decreased apoptotic rate. In addition, Western blot detection of ECM-related factors (Collagen I, Collage II, MMP-1, MMP-3, and MMP-13) revealed that SPTLC2 overexpression promoted the expression of collagens (Collagen I and Collage II) and suppressed matrix metalloproteinase (MMP-1, MMP-3, and MMP-13) level. In contrast, SPTLC2 knockdown in normal chondrocytes showed opposite effects on cell viability, apoptosis, and ECM degeneration. The articular cartilage of OA rats was transfected with lentivirus overexpressing SPTLC2; HE and Safranin-O fast green demonstrated that SPTLC2 overexpression could alleviate chondrocyte injuries and slow down the development of OA. In conclusion, SPTLC2 plays a role in OA and may be a potential target gene for the treatment of OA.