ABSTRACT
To investigate the distribution characteristics of spontaneous combustion disaster (SCD) zones in the goaf of "110" mining method with U + L ventilation system and formulate corresponding fire prevention measures, enclosed coal oxidation experiments were carried out to measure the oxidation characteristics of Dongrong Coal Mine bituminous coal sample. A coupled 3DEC-CFD (3 dimensional Distinct Element Code) model was established. The 3D transient distribution characteristics of SCD zones in the "110" mining goaf under U+L ventilation condition were analyzed. Nitrogen injection in the tailgate was proposed for coal spontaneous combustion prevention. The results show that air leakage changed the distribution of oxygen and temperature fields in the "110" goaf, causing the region 20~60 m parallel to the retained roadway to remain in the oxidation zone for spontaneous combustion. As the working face advanced, the area change curve of SCD zones in the "110" goaf exhibited a "double inflection point" pattern. Eliminating the "retained roadway oxidation zone" can effectively reduce the spontaneous combustion risks in the "110" goaf and ensure mining safety. This study enriches the mechanisms of coal spontaneous combustion.
Subject(s)
Coal Mining , Spontaneous Combustion , Temperature , Coal Mining/methods , Coal , Oxidation-ReductionABSTRACT
The utilization of CO2 is extremely important to solve the environmental problems and coal spontaneous combustion in goaf. There are three kinds of CO2 utilization in goaf: adsorption, diffusion, and seepage. Since adsorption will consume CO2 in goaf, the optimization of CO2 injection amount is very critical. A self-developed adsorption experimental device was used to determine the CO2 adsorption capacity of three different particle sizes of lignite coal samples at 30-60 °C and 0.1-0.7 MPa. The factors affecting CO2 adsorption by coal and its thermal effect were studied. In the coal and CO2 system, the CO2 adsorption characteristic curve is not affected by temperature, but there are differences in that with different particle sizes. The adsorption capacity increases with the increase of pressure, while it decreases with the increase of temperature and particle size. Under atmospheric pressure, the adsorption capacity of coal is a logistic function relationship with temperature. Furthermore, the average adsorption heat of CO2 on lignite shows that the interaction force between CO2 molecules has a stronger effect on CO2 adsorption than the effect of heterogeneity and anisotropy on the coal surface. Finally, the existing gas injection equation is improved theoretically with CO2 dissipation, which provides a new idea for the work of CO2 prevention and fire suppression in goaf.
ABSTRACT
To explore the wind flow turbulence and smoke flow diffusion law during the mine downward ventilation fire, two similar experimental platforms of a inclined single pipe test device and a loop system multiple pipe test device were built. The change data of the air flow in the pipeline during the fire period under different air volumes were measured. The evolution process of downward ventilation fire in the whole roadway network domain in Dayan Mine was simulated, and the emergency plan was put forward. The results show that in the experiment, the combustion intensity of the fire source is positively correlated with the ventilation power, and the fire wind pressure increases with the increase of the inclination angle of the pipeline. The throttling effect of the fire area and the combustion of the fire source together make the air volume in the pipeline change rapidly. The critical wind speed that makes the downward ventilation flow fire wind pressure equal to the fan power is 1.8 m s-1. The stronger the fan capacity, the stronger the ability of the main air path to overcome the resistance of the fire zone and maintain the original state. In the simulation, the most dangerous place when the downward ventilation fire smoke is reversed is the area (weak flow area) in the mine tunnel network where the ventilation power is weaker than the fire wind power. This study can provide a theoretical basis for the formulation of emergency plans for mine fire accidents.
ABSTRACT
To observe the effect of magnesium ion on vascular function in rats after long-term exhaustive exercise. Forty male SD rats were divided into two groups, the control group (CON group, n = 20) and the exhaustive exercise group (EEE group, n = 20). Exhausted rats performed 1W adaptive swimming exercise (6 times/W, 15min/time), and then followed by 3W formal exhaustive exercise intervention. Hematoxylin and eosin (HE) staining was used to detect the morphological changes of rat thoracic aorta. The contents of interleukin-1 ß (IL-1ß) and tumor necrosis factor-α (TNF-α) in serum of rats were determined by enzyme-linked immunosorbent assay (ELISA), and the contents of malondialdehyde (MDA), reactive oxygen species (ROS), nitric oxide (NO) and endothelin 1 (ET-1) in serum of rats were determined by biochemical kit. Vascular ring test detects vascular function. Compared with the CON group, the smooth muscle layer of the EEE group became thicker, the cell arrangement was disordered, and the integrity of endothelial cells was destroyed; the serum Mg2+ in EEE group was decreased; the serum levels of IL-1ß, TNF-α, MDA and ROS in EEE group were significantly higher than those in the CON group (P are all less than 0.05); the serum NO content in EEE group was significantly decreased, and the ratio of NO/ET-1 was significantly decreased. In the exhaustion group, the vasoconstriction response to KCl was increased, and the relaxation response to Ach was weakened, while 4.8mM Mg2+ could significantly improve this phenomenon (P are all less than 0.01). The damage of vascular morphology and function in rats after exhaustion exercise may be related to the significant increase of serum IL-1ß, TNF-α, ROS, MDA and ET-1/NO ratio in rats after exhaustion exercise, while Mg2+ can significantly improve the vasomotor function of rats after exhaustion exercise.
Subject(s)
Magnesium , Tumor Necrosis Factor-alpha , Rats , Male , Animals , Rats, Sprague-Dawley , Reactive Oxygen Species , Endothelial CellsABSTRACT
To study the reaction paths and reaction mechanisms of the active structures in coal during the oxidation process, the oxygen-free pyrolysis and oxygen-containing combustion were simulated for nine active structures in coal based on the ReaxFF MD method. A separate simulation analysis of the active structure yielded that O2 inhibited the reaction of H1. As the branched chain grows, the reaction paths of C2 and Q2 follow the direction of the reaction of carboxyl and aldehyde groups to CO2 and CO. Considering the reaction rates and reaction process products of A1, B1, and B3 structures, it is obtained that O2 has the greatest contribution to the decomposition reaction of aliphatic hydrocarbon structures. This is due to the strong electron-absorbing property of O2 that attracts H radicals to generate HO2, which in turn affects the reaction path of the active structure. Tracing the reaction process reveals that OH and oxygen-containing radicals under oxygen-free conditions greatly influence the active structural reaction.
ABSTRACT
To investigate the delayed release characteristics of CO gas in the initial stage of the low-temperature oxidation of coal, closed oxygen consumption experiments were conducted on coal samples taken from the Hongqingliang coal mine, and the corresponding relationship between the CO concentration and time in the initial stage of the experimental reaction was analyzed. A physical adsorption model of the macromolecules in coal for O2 and CO was established, and the difference in the competitive adsorption between the CO and O2 gas molecules on the coal surface was analyzed from a microscopic perspective using the grand canonical ensemble Monte Carlo simulation. The results showed a delayed CO release phenomenon in the initial stage of the reaction in all the experiments, and the delayed time of CO release was negatively correlated with the temperature; the relationship between the adsorption amounts of CO and O2 in the molecular structure model of coal was CO > O2. With increasing temperature, the adsorption capacity of the two gases decreased. Under the same conditions, there was competitive adsorption of the mixture of CO and O2 by coal, with the adsorption capacity of CO being much greater than that of O2. The adsorption of CO gas molecules by coal played an inhibitory role in the release of CO gas in the initial oxidation stage. The study results are expected to help understand the CO generation characteristics in the goaf of coal seam working faces and thus prevent coal mine disasters.
ABSTRACT
The 11101 working face of Qipanjing Mine was taken as the research object to explore the dynamic change law of the spontaneous combustion of the remaining coal in the gob-side entry retaining goaf area. A sealed oxygen consumption experiment was conducted to determine the (critical) oxygen volume fraction in the suffocation zone and continuous oxygen consumption rate of coal samples. The parameters of the working face were measured on site, and the air volume fraction in the goaf was monitored using a beam tube. Considering upward ventilation and the effect of gravity, a UDF control program for the falling medium in the gob-side entry retaining goaf was written. Based on the experimental results, a control program for the continuous oxygen consumption rate of the remnant coal was compiled, the dynamic distribution of the flow field in the gob-side entry retaining goaf was simulated with different advancing positions and air leakage at the working face, and a prediction model for the spontaneous combustion danger area was established. Finally, fire prevention measures via grouting in the return air lane side and nitrogen injection in the retaining lane side were put forward. The results showed that with the variation in the advancing position of the working face or in the air leakage of the air intake lane, the range of the natural hazardous area of the gob-side entry retaining goaf presents a distribution with a power function SF = xn+b (0 < n < 1). The theoretically proposed fire-fighting measures can effectively reduce the risk of spontaneous combustion of coal.
Subject(s)
Coal Mining , Spontaneous Combustion , Coal , Coal Mining/methods , Nitrogen , OxygenABSTRACT
Investigating the division of coal spontaneous combustion stages and the selection of indicator gases is significant to the safe production of coal mines. In this study, the characteristic temperature of coal spontaneous combustion, the generation law of indicator gases, the combustion process, and the division of the combustion stages of coal samples taken from Hongqingliang (HQL) and Dayan (DY) mines were investigated using thermogravimetric analysis experiment, indicator gas detection experiment, and coal oxidation spontaneous combustion experiment. The results of the thermogravimetric analysis experiment showed that the pyrolysis temperatures of the HQL and DY coals were 115.76°C and 131.80°C, and the ignition temperatures were 337.74°C and 360.18°C, respectively. The indicator gas detection results showed that the first-appearance temperature of C2H4 was 85°C for the HQL and DY coals, whereas the first-appearance temperature of C2H6 varied: 115°C for the HQL coal and 130°C for the DY coal. The first-appearance temperatures of C2H2 were 180°C and 195°C for the HQL and DY coals, respectively. The experiments on coal oxidation spontaneous combustion showed that the spontaneous combustion period of the HQL and DY coals were 35.45 and 42.3 days, respectively. The heating process during combustion could be divided into four stages: a latent period of spontaneous combustion, a slow spontaneous heating period, an accelerated spontaneous heating period, and a period of combustion. The critical temperature of each stage showed a good correlation with the incipient temperature of the indicator gases, namely C2H2, C2H4, and C2H6, and the appearance of the above gases can be used to characterize the degree of spontaneous combustion of coal.
Subject(s)
Coal , Spontaneous Combustion , Coal/analysis , Gases/analysis , Oxidation-Reduction , TemperatureABSTRACT
To study the generation rules of organic molecules or fragments and the generation paths of some hydrocarbon gases (C2H2/C2H4) and inorganic gases (CO2/H2O/H2/H2S) in the pyrolysis process of bituminous coal at 1000-5000 K, the ReaxFF molecular dynamics module in AMS software was used to simulate the pyrolysis behavior of the Hongqingliang model, Gaojialiang model, and Wiser model. With the increase of temperature, the system potential energy decreases, the endothermic efficiency increases first and then decreases, the fragments of C1-C4 fragments increase, and the gas molecules generated increase. In the pyrolysis process, the oxygen-containing functional groups and hydrogen groups formed H2O and H2 with the increase of temperature. H2S as an intermediate product is always maintained in dynamic equilibrium. CO2 comes from the decarboxylation of the carboxyl groups. When the temperature is lower than 3000 K, C2H4 and C2H2 are mainly formed by the adjacent carbon structure in coal molecules, and C2H4 is formed from the ethyl side chain, the naphthenic structure, and the unstable aromatic rings. C2H2 is formed from naphthene structures and aromatic rings with multiple side chains. When the temperature is higher than 3000 K, C2H4 and C2H2 are mainly formed by the random combination of free radicals generated by the crushing of coal molecules. The research results are of great significance to coal pyrolysis and clean utilization of coal.
ABSTRACT
The gas pressure generated during a coal and gas outburst is an important factor affecting the stability of mine ventilation systems. The gas released from an outburst flows and diffuses in the mine, leading to an uneven distribution of the air in the mine ventilation system and the formation of natural wind pressure. Because of the effect of the gas pressure, the mine ventilation system becomes disordered, leading to a counter flow in the roadway. This increases the complexity of the gas movement, extends the influence range of the gas, enlarges the disaster area in the mine, and exacerbates the destructiveness. In this study, the TF1M simulation program was applied to simulate a coal and gas outburst accident that occurred in the 1747 heading roadway of the Sizhuang Coal Mine, in a bid to reproduce the entire process of the diffusion flow of the counter current and outburst gas in the mine roadway. Moreover, the dynamic influence of the gas pressure on the entire ventilation network was analyzed. An experimental device was set up to test the relationship between the natural wind pressure and the height difference of the roadway and density of the gas flow, and the formation and mechanism of the natural wind pressure were explored. By analyzing the experimental and numerical results, the variation law of the air flow and the law of gas movement under the influence of gas pressure were summarized. The movement law and influencing factors of the gas during the mine outburst period were studied, the influence range of the gas was determined, the distribution law of the gas concentration after the outburst was obtained, and further expansion of the gas was prevented. This study has theoretical and practical significance in enhancing our understanding of the development process of mine gas disasters, which can help establish effective emergency response strategies and reasonably implement postdisaster relief measures.
ABSTRACT
To study the adsorption characteristics of CO, CO2, N2, O2, and their binary-components in lignite coal, reveal the influence of CO2 or N2 injection and air leakage on the desorption of CO in goafs, a lignite model (C206H206N2O44) was established, and the supercell structure was optimized under temperatures of 288.15-318.15 K for molecular simulation. Based on molecular dynamics, the Grand Canonical Monte Carlo method was used to simulate the adsorption characteristics and the Langmuir equation was used to fit the adsorption isotherms of gases. The results show that for single-components, the order of adsorption capacity is CO2 > CO > O2 > N2. For binary-components, the competitive adsorption capacities of CO2 and CO are approximate. In the low-pressure zone, the competitive adsorption capacity of CO2 is stronger than that of CO, and the CO is stronger than N2 or O2. From the simulation, it can be seen that CO2, N2 or O2 will occupy adsorption sites, causing CO desorption. Therefore, to prevent the desorption of the original CO in the goaf, it is not suitable to use CO2 or N2 injection for fire prevention, and the air leakage at the working faces need to be controlled.
ABSTRACT
BACKGROUND: The ongoing coronavirus disease 19 (COVID-19) is posing a threat to the public health globally. Serological test for SARS-CoV-2 antibody can improve early diagnosis of COVID-19 and serves as a valuable supplement to RNA detection. METHOD: A SARS-CoV-2 IgG/IgM combined antibody test strip based on colloidal gold immunochromatography assay was developed, with both spike protein and nucleocapsid protein of SARS-CoV-2 antigen used for antibody detection. From 3 medical institutions across China, serum or plasma of 170 patients with confirmed COVID-19 diagnosis and 300 normal controls were collected and tested with the strip. Sensitivity, specificity, kappa coefficient, receiver operating characteristic (ROC) curve, and area under the curve (AUC) were analyzed. Positive rates in different medical centers, age group, gender, and different disease course were compared. RESULTS: 158 out 170 samples from confirmed COVID-19 patients had positive results from the test, and 296 out of 300 samples from normal controls had negative results. The kit was 92.9% sensitive and 98.7% specific. The positive rate was 77.3% during the first week after disease onset, but reached 100% since day 9. AUC and kappa coefficient were 0.958 and 0.926, respectively, which showed the consistency of the test results with the standard diagnosis. Age or gender caused little variations in the kit sensitivity. CONCLUSION: The rapid, easy-to-use SARS-CoV-2 IgG/IgM combined antibody test kit has a superior performance, which can help with accurate diagnosis and thus timely treatment and isolation of COVID-19 patients, that contributes to the better control of the global pandemic.
Subject(s)
COVID-19 Testing/methods , Immunoassay/methods , Adult , Antibodies, Viral/immunology , Antigens, Viral/immunology , COVID-19 Testing/instrumentation , Case-Control Studies , China , Female , Gold Colloid , Humans , Immunoassay/instrumentation , Immunoglobulin G/blood , Immunoglobulin M/blood , Male , Middle Aged , Nucleocapsid/immunology , Reagent Strips , SARS-CoV-2/immunology , Sensitivity and Specificity , Spike Glycoprotein, Coronavirus/immunologyABSTRACT
The existence of H2S in a system could lead to catalyst deactivation, pipeline corrosion, and environmental pollution. A rotating packed bed (RPB), a novel reactor with high mass transfer efficiency and small dimension, is employed in this study to remove H2S. For RPB, the most significant section for mass transfer is the end-effect zone of packing. A mathematical model for liquid flow in the packing is established to quantify the length of the end-effect zone. A simple and effective visual experimental method is then proposed to investigate the end-effect zone in the RPB. A gas-liquid mass transfer experiment is finally employed to confirm the validity of the proposed mathematical model. With the aid of this model, the length of packing of a RPB used for pilot-scale H2S removal is optimized. The optimized RPB removes 99.8% of H2S (15 vol % to 0.03 vol %) from the system. The proposed model can help optimize the design of a RPB reactor.