Growth of Scenedesmus obliquus in anaerobically digested swine wastewater from different cleaning processes for pollutants removal and biomass production.

Anaerobically digested swine wastewater (ASW) purification by microalgae provides a promising strategy for nutrients recovery, biomass production and CO2 capture. However, the characteristics of ASW from different cleaning processes vary greatly. At present, the cultivation of microalgae in ASW from different manure cleaning processes is rarely investigated and compared. That may bring uncertainty for microalgae growth using different ASW in large-scale application. Thus, the ASW from three cleaning processes were tested for cultivating microalgae, including manure dry collection (I), water flushing (II) and water submerging processes (III). The characteristics of ASW from three manure cleaning processes varied greatly such as nutrient and heavy metals levels. High concentration of ammonia and copper in ASW significantly inhibited microalgae growth. Fortunately, the supply of high CO2 (10%) effectively alleviated negative influences, ensuring microalgal growth at low dilution ratio. The characteristics of three ASW resulted in significant differences in microalgae growth and biomass components. The maximal biomass production in optimal diluted ASW-I, II and III reached 1.46 g L-1, 2.19 g L-1 and 2.47 g L-1, respectively. The removal of organic compounds, ammonia and phosphorus by optimal microalgae growth in diluted ASW-I, II and III was 50.6%/94.2%/64.7%, 63.7%/82.3%/57.6% and 83.2%/91.7%/59.7%, respectively. The culture in diluted ASW-I, II and III obtained the highest lipids production of 12.1 mg L-1·d-1, 16.5 mg L-1·d-1 and 19.4 mg L-1·d-1, respectively. The analysis of lipids compositions revealed that the proportion of saturated fatty acids accounted for 36.4%, 32.4% and 27.9 % in optimal diluted ASW-I, II and III, as ideal raw materials for biodiesel production.

Growth of Scenedesmus obliquus on anaerobic soybean wastewater using different wasted organics for high biomass production and nutrients recycling.

The microalgae culture in mixing sewage with different characteristics may significantly improve biomass production and nutrients recycling efficiency. In this study, three waste organic wastewater including molasses, alcohol and glycerol wastewater were mixed with anaerobic soybean wastewater as mediums for microalgae culture. The optimal mixture of molasses, alcohol and glycerol wastewater was at an initial carbon-nitrogen ratio of 7:1, 5:1 and 10:1, improving biomass production by 60.4%, 31.3% and 68.7%, respectively. The removal efficiencies of organics, ammonia nitrogen and phosphorus at optimal mixture were 54.8-62.4%, 79.5-99.1% and 49.3-61.5%, and the removal rates increased by 340-630%, 27.5-66.3% and 36.3-70.2% compared to the blank culture. In addition, the culture in mixed wastewater increased lipids contrast by 0.7-1.3 times, while achieving higher saturation in fatty acids. The results suggested that microalgae culture using mixed wastewater was a strategy for high biomass production and nutrients recycling efficiency.

Lightweight Polyethylene/Hexagonal Boron Nitride Hybrid Thermal Conductor Fabricated by Melt Compounding Plus Salt Leaching.

Application of porous polymeric materials is severely limited by their ultralow thermal conductivities. Herein, by promoting the formation of thermal conduction pathways, we fabricated open-cellular structured polyethylene/hexagonal boron nitride hybrid thermal conductors via melt compounding plus salt leaching. The structural analyses indicate that the inclusion of hBN can enhance the open-cell level of resultant materials. X-ray diffractions confirm the high in-plane alignments of hBN in each sample. Consequently, the test results evidence the superior thermal conductivities of our samples, and the thermal conductivities of each sample are characterized as functions of hBN loadings. Ultimately, our advanced porous thermal conductor with a low hBN loading of 3.1 vol% exhibits a high specific thermal conductivity of 0.75 (W/mk)/(g/cm3), which is 82.9% higher than virgin PE and far higher than bulk PE/hBN composites. Our work also intends to reveal the architectural advantages of open-cellular, as compared with the close-one, in fabricating porous materials with highly interconnected fillers.

Cultivation of Chlorella pyrenoidosa in anaerobic wastewater: The coupled effects of ammonium, temperature and pH conditions on lipids compositions.

Anaerobic wastewater potentially was an ideal medium for cultivating microalgae. The coupled effect of ammonium, temperature and pH on lipids accumulation was a core issue during algal culture using anaerobic wastewater. Therefore, their combined effects on Chlorella pyrenoidosa culture and lipids accumulation in anaerobic effluent were investigated. Free ammonia induced from the rising pH and temperature inhibited algal growth, but significantly promoted lipid accumulation. The highest lipids content reached 30.2% when pH rose to 8.3-8.5 (25 °C, ammonium 280 mg/L), which was 1.6-fold higher than that under neutral condition. Moreover, the percentage of unsaturated fatty acids (un-SFAs) increased to 74.8-77.9% at pH 8.3-8.5, whereas it was only 56.1-58.9% under neutral condition. The C18:2 and C18:3 dominated the un-SFAs increase at high pH, typically the percentage of C18:3 increased by 74.5-153.1%. This study provides a potential way for lipid accumulation in algal culture using anaerobic wastewater.