Toward maximum energy density enabled by anode-free lithium metal batteries: Recent progress and perspective.

Owing to the emergenceof energy storage and electric vehicles, the desire for safe high-energy-density energy storage devices has increased research interest in anode-free lithium metal batteries (AFLMBs). Unlike general lithium metal batteries (LMBs), in which excess Li exists to compensate for the irreversible loss of Li, only the current collector is employed as an anode and paired with a lithiated cathode in the fabrication of AFLMBs. Owing to their unique cell configuration, AFLMBs have attractive characteristics, including the highest energy density, safety, and cost-effectiveness. However, developing AFLMBs with extended cyclability remains an issue for practical applications because the high reactivity of Li with limited inventory causes severely low Coulombic efficiency (CE), poor cyclability, and dendrite growth. To address these issues, tremendous effort has been devoted to stabilizing Li metal anodes for AFLMBs. In this review, the importance and challenges of AFLMBs are highlighted. Then, diverse strategies, such as current collectors modification, advanced electrolytes, cathode engineering, and operation protocols are thoroughly reviewed. Finally, a future perspective on the strategy is provided for insight into the basis of future research. It is hoped that this review provides a comprehensive understanding by reviewing previous research and arousing more interest in this field.

Ultrathin Mixed Ionic-Electronic Conducting Interlayer via the Solution Shearing Technique for High-Performance Lithium-Sulfur Batteries.

The commercialization of lithium-sulfur (Li-S) batteries has been hampered by diverse challenges, including the shuttle phenomenon and low electrical/ionic conductivity of lithium sulfide and sulfur. To address these issues, extensive research has been devoted to developing multifunctional interlayers. However, interlayers capable of simultaneously suppressing the polysulfide (PS) shuttle and ensuring stable electrical and ionic conductivity are relatively uncommon. Moreover, the use of thick and heavy interlayers results in an unavoidable decline in the energy density of Li-S batteries. We developed an ultrathin (750 nm), lightweight (0.182 mg cm-2) interlayer that facilitates mixed ionic-electronic conduction using the solution shearing technique. The interlayer, composed of carbon nanotube (CNT)/Nafion/poly-3,4-ethylenedioxythiophene:tetracyanoborate (PEDOT:TCB), effectively suppresses the shuttle phenomenon through the synergistic segregation and adsorption effects on PSs by Nafion and CNT/PEDOT, respectively. Furthermore, the electrical/ionic conductivity of the interlayer can be improved via counterion exchange and homogeneous Li+ ion flux/good wettability from SO3- functional group of Nafion, respectively. Enhanced sulfur utilization and reaction kinetics through polysulfide shuttle inhibition and facilitated electron/ion transfer by interlayer enable a high discharge capacity of 1029 mA h g-1 in the Li-S pouch cell under a high sulfur loading of 5.3 mg cm-2 and low electrolyte/sulfur ratio of 5 µL mg-1.

Understanding the Role of Zinc Hydroxide Sulfate and its Analogues in Mildly Acidic Aqueous Zinc Batteries: A Review.

Mildly acidic aqueous zinc batteries (AZBs) have attracted tremendous attention for grid storage applications with the expectation to tackle the issues of Li-ion batteries on high cost and poor safety. However, the performance, particularly energy density and cycle stability of AZBs are still unsatisfactory when compared with LIBs. To help the development of AZBs, a lot of effort have been made to understand the battery reaction mechanisms and precedent microscopic and spectroscopic analyses have shown flake-like large particles of zinc hydroxide sulfate (ZHS) and its analogues formed on the surfaces of cathodes and anodes in sulfate and other electrolyte systems during cycling. However, because of the complexity of the thermodynamics and kinetics of aqueous reactions to understand different battery conditions, controversies still exist. This article will review the roles of ZHS discussed in recent representative references aiming to shine light on the fundamental mechanisms of AZBs and pave ways to further improve the battery performance.

Cooperative Electronic Structure Modulator of Fe Single-Atom Electrocatalyst for High Energy and Long Cycle Li-S Pouch Cell.

High-energy and long cycle lithium-sulfur (Li-S) pouch cells are limited by the insufficient capacities and stabilities of their cathodes under practical electrolyte/sulfur (E/S), electrolyte/capacity (E/C), and negative/positive (N/P) ratios. Herein, an advanced cathode comprising highly active Fe single-atom catalysts (SACs) is reported to form 320.2 W h kg-1 multistacked Li-S pouch cells with total capacity of ≈1 A h level, satisfying low E/S (3.0), E/C (2.8), and N/P (2.3) ratios and high sulfur loadings (8.4 mg cm-2 ). The high-activity Fe SAC is designed by manipulating its local environments using electron-exchangeable binding (EEB) sites. Introducing EEB sites comprising two different types of S species, namely, thiophene-like-S (-S) and oxidized-S (-SO2 ), adjacent to Fe SACs promotes the kinetics of the Li2 S redox reaction by providing additional binding sites and modulating the Fe d-orbital levels via electron exchange with Fe. The -S donates the electrons to the Fe SACs, whereas -SO2 withdraws electrons from the Fe SACs. Thus, the Fe d-orbital energy level can be modulated by the different -SO2 /-S ratios of the EEB site, controlling the electron donating/withdrawing characteristics. This desirable electrocatalysis is maximized by the intimate contact of the Fe SACs with the S species, which are confined together in porous carbon.

A Versatile Strategy for Achieving Fast-Charging Batteries via Interfacial Engineering: Pseudocapacitive Potassium Storage without Nanostructuring.

The rapid transport of alkali ions in electrodes is a long-time dream for fast-charging batteries. Though electrode nanostructuring has increased the rate-capability, its practical use is limited because of the low tap density and severe irreversible reactions. Therefore, development of a strategy to design fast-charging micron-sized electrodes without nanostructuring is of significant importance. Herein, a simple and versatile strategy to accelerate the alkali ion diffusion behavior in micron-sized electrode is reported. It is demonstrated that the diffusion rate of K+ ions is significantly improved at the hetero-interface between orthorhombic Nb2 O5 (001) and monoclinic MoO2 (110) planes. Lattice distortion at the hetero-interface generates an inner space large enough for the facile transport of K+ ions, and electron localization near oxygen-vacant sites further enhances the ion diffusion behavior. As a result, the interfacial-engineered micron-sized anode material achieves an outstanding rate capability in potassium-ion batteries (KIBs), even higher than nanostructured orthorhombic Nb2 O5  which is famous for fast-charging electrodes. This is the first study to develop an intercalation pseudocapacitive micron-sized anode without nanostructuring for fast-charging and high volumetric energy density KIBs. More interestingly, this strategy is not limited to K+ ion, but also applicable to Li+ ion, implying the versatility of interfacial engineering for alkali ion batteries.

Polymer Interface-Dependent Morphological Transition toward Two-Dimensional Porous Inorganic Nanocoins as an Ultrathin Multifunctional Layer for Stable Lithium-Sulfur Batteries.

Two-dimensional (2D) porous inorganic nanomaterials have intriguing properties as a result of dimensional features and high porosity, but controlled production of circular 2D shapes is still challenging. Here, we designed a simple approach to produce 2D porous inorganic nanocoins (NCs) by integrating block copolymer (BCP) self-assembly and orientation control of microdomains at polymer-polymer interfaces. Multicomponent blends containing BCP and homopoly(methyl methacrylate) (hPMMA) are designed to undergo macrophase separation followed by microphase separation. The balanced interfacial compatibility of BCP allows perpendicularly oriented lamellar-assembly at the interfaces between BCP-rich phase and hPMMA matrix. Disassembly of lamellar structures and calcination yield ultrathin 2D inorganic NCs that are perforated by micropores. This approach enables control of the thickness, size, and chemical composition of the NCs. 2D porous and acidic aluminosilicate NC (AS-NC) is used to fabricate an ultrathin and lightweight functional separator for lithium-sulfur batteries. The AS-NC layer acts as an ionic sieve to selectively block lithium polysulfides. Abundant acid sites chemically capture polysulfides, and micropores physically exclude them, so sulfur utilization and cycle stability are increased.

Mesoporous carbon host material for stable lithium metal anode.

Lithium (Li) metal is a promising anode material for next-generation batteries because of its low standard reduction potential (-3.04 V vs. SHE) and high specific capacity (3860 mA h g-1). However, it is still challenging to directly use Li metal as anode material in commercial batteries because of unstable Li dendrite formation and accumulated solid-electrolyte interphase. Possible methods that can suppress the unwanted formation of Li dendrites are (i) by increasing the electrode surface area and (ii) formation of porosity for confining Li. Here, we tested microporous (<2 nm) carbon and mesoporous (2-50 nm) carbon as host materials for the Li metal anode to avoid their degradation during cycling of lithium metal batteries (LMBs). Mesoporous carbon was more effective than microporous carbon as a host material to confine the Li metal and the lifetime of mesoporous carbon was more than twice as long as those of the Cu foil and microporous carbon. After confirmed better anode performance of mesoporous carbon host material, we applied Li-plated mesoporous carbon as an anode in a lithium-sulfur battery (Li-S) full cell. This research work suggests that mesopores, in spite of their low specific surface area, are better than micropores in stabilizing the Li metal and that a mesoporous host material can be applied to Li metal anodes for use in next-generation battery applications.

Transformation of carbon dioxide into carbon nanotubes for enhanced ion transport and energy storage.

The synthesis of carbon nanotubes (CNTs) from CO2 is an attractive strategy to reduce CO2 emission, but involves extreme reaction conditions and has low scalability. This work introduces continuous chemical vapor deposition for the conversion of CO2 to CNTs using the NaBH4 reductant and NiCl2 catalyst. Multi-walled CNT fibers were synthesized from gaseous CO2 under mild conditions (500-700 °C and 1 atm). Based on in situ analyses, the proposed mechanism behind the formation of CO2-derived CNTs (CCNTs) is CO2 activation and subsequent hydroboration for the generation of methane, which can induce the growth of CCNTs on the catalyst. Their intrinsic properties give rise to an enhanced capacitive performance. The boron and oxygen of CCNTs provide a pseudo-capacitance of 302 F g-1 at a low charging rate of 0.1 A g-1 in 1 M TEABF4/acetonitrile. The mesoporous networks between CCNT fibers enhance ion transport at a high current density of 205 A g-1, leading to an outstanding energy density of 13 W h kg-1 at a high power density of 115 kW kg-1. A well-developed graphitized structure of CCNTs contributes to the reduction of the electrochemical resistance and leads to their superior stability at 65 °C during 10 000 cycles.

Amorphous Tin Oxide Nanohelix Structure Based Electrode for Highly Reversible Na-Ion Batteries.

An array of amorphous tin oxide (a-SnOx) nanohelixes (NHs) was fabricated on copper foil as an electrode for Na-ion batteries via the oblique angle deposition method, a solution- and surfactant-free process. The combination of the amorphous phase SnOx with a low oxidation number and its vertically aligned NH geometry with a large surface area and high porosity, which facilitate Na-ion dynamics and accommodate the volume changes, enabled a reversible capacity of up to 915 mA h g-1 after 50 cycles, fast rate capability with 48.1% retention at 2 A g-1, and high stability, which are superior to those of crystalline nanoparticle-based electrodes.

A Comprehensive Review of Materials with Catalytic Effects in Li-S Batteries: Enhanced Redox Kinetics.

Lithium-sulfur batteries (LSBs) are cost-effective and high-energy-density batteries. However, the insulating nature of active materials, the shuttle effect, and slow redox kinetics lead to severe capacity decay and low rate capabilities. Numerous multimodal approaches have been attempted to tackle these issues and have pushed the cycle stability and energy density to higher levels. Recently, accelerating the redox kinetics using catalytic materials has been considered as a means to realize high-performance LSBs. In this Minireview, we provide an insightful overview of the advances in the design of LSB catalytic materials and mechanistic descriptions of their catalytic activities.

Approaching Ultrastable High-Rate Li-S Batteries through Hierarchically Porous Titanium Nitride Synthesized by Multiscale Phase Separation.

Porous architectures are important in determining the performance of lithium-sulfur batteries (LSBs). Among them, multiscale porous architecutures are highly desired to tackle the limitations of single-sized porous architectures, and to combine the advantages of different pore scales. Although a few carbonaceous materials with multiscale porosity are employed in LSBs, their nonpolar surface properties cause the severe dissolution of lithium polysulfides (LiPSs). In this context, multiscale porous structure design of noncarbonaceous materials is highly required, but has not been exploited in LSBs yet because of the absence of a facile method to control the multiscale porous inorganic materials. Here, a hierarchically porous titanium nitride (h-TiN) is reported as a multifunctional sulfur host, integrating the advantages of multiscale porous architectures with intrinsic surface properties of TiN to achieve high-rate and long-life LSBs. The macropores accommodate the high amount of sulfur, facilitate the electrolyte penetration and transportation of Li+ ions, while the mesopores effectively prevent the LiPS dissolution. TiN strongly adsorbs LiPS, mitigates the shuttle effect, and promotes the redox kinetics. Therefore, h-TiN/S shows a reversible capacity of 557 mA h g-1 even after 1000 cycles at 5 C rate with only 0.016% of capacity decay per cycle.

Programmed Nanoparticle-Loaded Nanoparticles for Deep-Penetrating 3D Cancer Therapy.

Tumors are 3D, composed of cellular agglomerations and blood vessels. Therapies involving nanoparticles utilize specific accumulations due to the leaky vascular structures. However, systemically injected nanoparticles are mostly uptaken by cells located on the surfaces of cancer tissues, lacking deep penetration into the core cancer regions. Herein, an unprecedented strategy, described as injecting "nanoparticle-loaded nanoparticles" to address the long-lasting problem is reported for effective surface-to-core drug delivery in entire 3D tumors. The "nanoparticle-loaded nanoparticle" is a silica nanoparticle (≈150 nm) with well-developed, interconnected channels (diameter of ≈30 nm), in which small gold nanoparticles (AuNPs) (≈15 nm) with programmable DNA are located. The nanoparticle (AuNPs)-loaded nanoparticles (silica): (1) can accumulate in tumors through leaky vascular structures by protecting the inner therapeutic AuNPs during blood circulation, and then (2) allow diffusion of the AuNPs for penetration into the entire surface-to-core tumor tissues, and finally (3) release a drug triggered by cancer-characteristic pH gradients. The hierarchical "nanoparticle-loaded nanoparticle" can be a rational design for cancer therapies because the outer large nanoparticles are effective in blood circulation and in protection of the therapeutic nanoparticles inside, allowing the loaded small nanoparticles to penetrate deeply into 3D tumors with anticancer drugs.

Synergistic Effect of Molecular-Type Electrocatalysts with Ultrahigh Pore Volume Carbon Microspheres for Lithium-Sulfur Batteries.

Lithium-sulfur (Li-S) batteries are regarded as potential high-energy storage devices due to their outstanding energy density. However, the low electrical conductivity of sulfur, dissolution of the active material, and sluggish reaction kinetics cause poor cycle stability and rate performance. A variety of approaches have been attempted to resolve the above issues and achieve enhanced electrochemical performance. However, inexpensive multifunctional host materials which can accommodate large quantities of sulfur and exhibit high electrode density are not widely available, which hinders the commercialization of Li-S batteries. Herein, mesoporous carbon microspheres with ultrahigh pore volume are synthesized, followed by the incorporation of Fe-N-C molecular catalysts into the mesopores, which can act as sulfur hosts. The ultrahigh pore volume of the prepared host material can accommodate up to ∼87 wt % sulfur, while the uniformly controlled spherical morphology and particle size of the carbon microspheres enable high areal/volumetric capacity with high electrode density. Furthermore, the uniform distribution of Fe-N-C (only 0.33 wt %) enhances the redox kinetics of the conversion reaction of sulfur and efficiently captures the soluble intermediates. The resulting electrode with 5.2 mg sulfur per cm2 shows excellent cycle stability and 84% retention of the initial capacity even after 500 cycles at a 3 C rate.

Multiscale Phase Separations for Hierarchically Ordered Macro/Mesostructured Metal Oxides.

Porous architectures play an important role in various applications of inorganic materials. Several attempts to develop mesoporous materials with controlled macrostructures have been reported, but they usually require complicated multiple-step procedures, which limits their versatility and suitability for mass production. Here, a simple approach for controlling the macrostructures of mesoporous materials, without templates for the macropores, is reported. The controlled solvent evaporation induces both macrophase separation via spinodal decomposition and mesophase separation via block copolymer self-assembly, leading to the formation of hierarchically porous metal oxides with periodic macro/mesostructures. In addition, using this method, macrostructures of mesoporous metal oxides are controlled into spheres and mesoporous powders containing isolated macropores. Nanocomputed tomography, focused ion beam milling, and electron microscopy confirm well-defined macrostructures containing mesopores. Among the various porous structures, hierarchically macro/mesoporous metal oxide is employed as an anode material in lithium-ion batteries. The present approach could provide a broad and easily accessible platform for the manufacturing of mesoporous inorganic materials with different macrostructures.