Are CAD-CAM milled glass fiber posts better than prefabricated or custom glass fiber posts for endodontically treated teeth? A systematic review with meta-analysis.

STATEMENT OF PROBLEM: Prefabricated and custom glass fiber posts have been successfully used to reconstruct endodontically treated teeth. However, the performance of computer-aided design and computer-aided manufacture (CAD-CAM) milled glass fiber posts is unclear. PURPOSE: The purpose of this systematic review with meta-analysis was to compare the fracture and bond strength and cement layer thickness of CAD-CAM milled glass fiber posts with prefabricated or custom glass fiber posts. MATERIAL AND METHODS: The protocol was registered in the Open Science Framework (http://osf.io/65jm7). Two reviewers searched the PubMed/MEDLINE, Web of Science, Embase, Scopus, and ProQuest databases for articles up to September 2023. In addition, the reference lists were hand searched. A meta-analysis was performed by using the RevMan 5.4 program. The risk of bias was assessed using the RoBDEMAT tool. RESULTS: After screening, a total of 18 studies were included. The CAD-CAM milled glass fiber posts showed higher fracture strength (P=.02; Standardized Mean Difference [SMD]: 0.57; 95% Confidence Interval [CI]: 0.07 to 1.07), bond strength (P=.010; SMD: 1.07; 95% CI: 0.26 to 1.89), and lower cement layer thickness (P=.009; SMD: -2.94; 95% CI: -5.15 to -0.73) when compared with prefabricated glass fiber posts. However, fracture strength (P=.53; SMD: 0.38; 95% CI: -0.79 to 1.54) and bond strength (P=.90; SMD: -0.05; 95% CI: -0.81 to 0.72) were statistically similar between CAD-CAM milled and custom glass fiber posts. Significant and substantial heterogeneity was observed in all meta-analyzes (P<.01; I>60%). The studies sufficiently reported most domains related to bias, except for randomization of samples, sample size rationale and reporting and operator blinding. CONCLUSIONS: CAD-CAM milled and custom glass fiber posts provide an effective and safe option for restoring endodontically treated teeth, especially for weakened teeth or enlarged root canals. However, further well-designed clinical research is recommended to strengthen these findings.

Effects of increasing instrument size and taper on the disinfection and shaping of mandibular incisors.

This study assessed canal preparation effects on disinfection and dentin preservation. Thirty mandibular incisors were paired into two experimental groups (n = 10). Following contamination, the initial microbial sample was collected. Instruments 30/0.03 (Group 1) and 30/0.05 (Group 2) were employed and a second sample was obtained. Canals were enlarged using instruments 40/0.03 and 40/0.05, respectively, and a third sample was collected. Final irrigation was performed, and sample S4 obtained. A final scan evaluated volume, surface area, unprepared areas, removed dentin and dentin thickness. Data were analysed using Student t-test, Mann-Whitney, Kruskal-Wallis and Dunn tests. A significant difference was observed between S1 and other time points (p < 0.05). Comparison between groups showed no differences in bacterial loads and in the percentage of microbial reduction (p > 0.05). Group 2 exhibited greater reduction in dentin thickness than group 1 in the mesial aspect of the root (p < 0.05). Instrument 30/0.03 might provide effective disinfection and safety during mandibular incisors canal preparation.

Root canal dentin wear during final irrigation in endodontic retreatment with passive ultrasonic irrigation and easy clean instruments.

Context: Complementary procedures have been proposed to improve the endodontic retreatments. Aim: The aim of this study was to evaluate, by microcomputed tomography (micro-CT), the dentin wear caused by passive ultrasonic irrigation (PUI) and easy clean (EC) instruments, when used for the final removal of filling material during endodontic retreatment. Methods: Thirty-six mesial roots of the lower first molars were divided into four groups (n = 9), according to the final irrigation and sealer: PUI/AH Plus, EC/AH Plus, PUI/Total Fill (TF), and EC/TF. Canal volume was evaluated, both before and after the final irrigation, by micro-CT analysis. The Kruskal-Wallis test was used to compare the volumes among groups and the paired Wilcoxon test was used to compare the volume values before and after the final irrigation within each group. Results: Both complementary cleaning procedures promoted dentin wear that was observed only when the volume was analyzed for each third of the root canal. In the apical third, both instruments showed significant wear, where the use of the EC instrument resulted in greater wear than the PUI, in teeth filled with both AH Plus and TF BC Sealers (P < 0.05). Conclusion: Both complementary cleaning procedures promoted dentin wear and must be used cautiously.

Impact of Calcium-Hydroxide, Sodium Ascorbate, and Sodium Thiosulphate on Bond Strength of Composite Restorations to Bleached Dentin.

This study evaluated the impact of using calcium-hydroxide or the antioxidant agents on the bond strength of adhesive restorations to bleached dentin. Forty teeth were prepared and allocated into 8 groups according to the surface treatment after bleaching (application or not of calcium hydroxide, 10% sodium ascorbate and 5% sodium thiosulphate for 10min), and the time of final restoration (immediate or after 7-days). Sodium perborate with 20% hydrogen peroxide was applied for 3 weeks using a developed artificial pulp chamber, with replacement every week. Composite resin restoration was performed and microtensile test was performed. Then, specimens were analyzed using a stereomicroscope and SEM. Data was submitted to Kruskal-Wallis and Dunn tests (p<0.05). The bond strength of non-bleached teeth was similar to the groups restored after 7 days of bleaching (p<0.05). The lowest values of bond strength were showed by groups restored immediately after bleaching (p<0.05). In all groups, there was a considerable predominance of adhesive fractures. Delaying the final restoration of teeth submitted to nonvital bleaching for 7 days permits an increase in bond strength. The immediate restoration of bleached teeth after the use of 10% sodium ascorbate or 5% sodium thiosulfate for 10 minutes showed unsatisfactory results. Clinical relevance Irrespective of the dentin protocol applied before adhesion, a satisfactory and an unsatisfactory result of bond strength values will be obtained delaying the final restoration or immediately performing the final restoration, respectively. Therefore, after nonvital tooth bleaching, clinicians should always delay the final restoration for a minimum period of 7 days.

Can the addition of surfactants to NaOCl irrigation impact on the percentage of voids of root canal filling?

This study evaluated the impact of canal irrigation using surfactants associated to NaOCl on the percentage of voids of root canal filling through micro-computed tomographic (micro-CT) analysis. 27 mandibular mesial roots with Vertucci type II canal configuration with isthmus were selected and scanned in a micro-CT device. The specimens were assigned to three groups (n = 9), according to the irrigation solution during instrumentation: 2.5% NaOCl without additives (control), 2.5% NaOCl with 0.1% Benzalkonium Chloride and 2.5% NaOCl with 0.1% Tween 80. After obturation, the specimens were rescanned, and the percentage of voids were calculated. Data were analysed using one-way ANOVA with a significance level of 5%. The percentage of voids were similar among the groups (p > 0.05). None of the specimens showed completely voids-free areas. The addition of surfactants to NaOCl irrigation did not improve the quality of root canal filling of mandibular mesial root canals.

Chronic alcohol and nicotine consumption as catalyst for systemic inflammatory storm and bone destruction in apical periodontitis.

AIM: To assess the periapical alveolar bone pattern and the serum levels of proinflammatory cytokines, biochemical markers and metabolites in rats subjected to chronic alcohol and nicotine consumption and induced apical periodontitis. METHODOLOGY: Twenty-eight male Wistar rats were divided into four groups: Control, Alcohol, Nicotine and Alcohol+Nicotine. The alcohol groups were exposed to self-administration of a 25% alcohol solution, while the other groups were given only filtered water. The nicotine groups received daily intraperitoneal injections of a nicotine solution (0.19 µL of nicotine/mL), whereas the other groups received saline solution. Periapical lesions were induced by exposing the pulps of the left mandibular first molars for 28 days. After euthanasia, the mandibles were removed and the percentage bone volume, bone mineral density, trabecular thickness, trabecular separation and trabecular number of the periapical bone were measured using micro-computed tomography images. Serum samples were collected for analysis of proinflammatory cytokines (IL-1ß, IL-4, IL-6 and TNF-α), biochemical and metabolomic analysis. Statistical analysis was performed with a significance level of 5%. Nonparametric data were analysed using the Kruskal-Wallis test followed by Dunn's test, while one-way anova followed by Tukey's test was performed for parametric data. RESULTS: The groups exposed to alcohol or nicotine consumption exhibited an altered bone pattern indicating lower bone density and higher levels of IL-1ß, IL-6 and TNF-α compared to the Control group (p < .05). Significant differences were observed among the groups in the levels of aspartate aminotransferase (AST), alanine aminotransferase (ALT), alkaline phosphatase, cholesterol, triglycerides, urea, creatinine, albumin, uric acid, bilirubin and calcium. Metabolomic analysis revealed significant differences in glycine, phosphocholine, lysine, lactate, valine, pyruvate and lipids (CH2 CH2 CO), n(CH2 ) and n(CH3 ). Most of these parameters were even more altered in the simultaneous consumption of both substances compared to single consumption. CONCLUSION: Alcohol and nicotine chronic consumption altered several metabolic markers, impaired liver and kidney function, increased the production of systemic proinflammatory mediators and harmed the periapical bone microarchitecture in the presence of apical periodontitis. The simultaneous consumption of alcohol and nicotine intensified these detrimental effects.

Effect of the progressive taper enlargement of buccal root canals of three-rooted maxillary molars: A stepwise micro-CT study.

This study evaluated unprepared canal areas, volume of dentine removal, and dentine thickness after the progressive enlargement of the buccal canals of 22 maxillary molars, with and without the MB2, using instruments with the same tip size (0.25 mm) but 4 different tapers (0.03, 0.05, 0.06 and 0.08 v). Micro-CT scans were performed after each instrument. Data were compared using a general linear mixed model post hoc comparisons with Kenward-Roger for Wald F tests (α = 5%). After each treatment step, it was observed an increase in the percentage volume of removed dentine and a decrease in the unprepared areas and dentine thickness at the pericervical region of all canals (p < 0.05). The percentage reduction of dentine thickness in MB2 canal was higher than in the mesiobuccal and distobuccal canals (p < 0.05). Knowledge of pre-operative dimensions and dentine thickness before enlargement of buccal canals of maxillary molars is an important factor to avoid excessive dentine removal.

Volumetric changes in root canal sealers in ex vivo and a novel animal model approach.

AIM: This study aimed to evaluate the volumetric change of root canal sealers through micro-computed tomographic analysis using a novel in vivo model and to compare the results with those obtained using an ex vivo test. METHODOLOGY: Eighteen single-rooted teeth were cut to 5 mm length from the root apex. The root canals were uniformly enlarged and filled with EndoSequence BC Sealer or AH Plus Jet root canal sealers. Samples were stored at 37°C and 95% relative humidity for 24 h and then scanned with a micro-CT device. Twelve samples (n = 6 for each sealer) were implanted in the subcutaneous tissue of Wistar rats, while six samples (n = 3 for each sealer) were immersed in 20 mL of phosphate-buffered saline (PBS) at 37°C at neutral pH. After 7 and 30 days, teeth were removed from subcutaneous tissue or PBS and rescanned. Statistical analysis of volume changes was performed using Shapiro-Wilk's test and independent t-test (p < .05). RESULTS: AH Plus Jet had smaller volume changes (-2.2 to +0.77%) than EndoSequence BC Sealer (-2.0 to +4.0%) (p < .05), in the two tested models. The volume of the root canal sealers decreased over time (p < .05), in vivo. AH Plus Jet results varied between the in vivo and ex vivo results (p < .05), while EndoSequence BC Sealer presented similar volume losses for both experimental models (p > .05). CONCLUSION: EndoSequence BC Sealer lost more volume than AH Plus Jet. The experimental conditions influenced the volumetric change of AH Plus Jet but not the EndoSequence BC Sealer. The ex vivo model should be further explored as a methodological alternative to assess the volumetric changes of root canal sealers without causing harm to animals.

Marginal gaps and voids using two warm compaction techniques and different sealers: a micro-CT study.

OBJECTIVE: To assess the percentage of marginal gaps and voids in oval-shaped canals obturated by using two warm compaction techniques with a Bio-C sealer and AH Plus Jet. MATERIALS AND METHODS: Forty canines with oval canals were scanned by microcomputed tomography (micro-CT), and root canal preparation was performed with an XP-endo Shaper system and irrigated with 5.25% sodium hypochlorite. Then, the specimens were paired into four groups (n=10) according to the root canal filling technique and endodontic sealer: Bio-C sealer and continuous wave of condensation, Bio-C sealer and Tagger's hybrid, AH Plus Jet and continuous wave of condensation, and AH Plus Jet and Tagger's hybrid. After root canal filling, a new scan was performed. The percentage of marginal gaps and voids was calculated with the ImageJ software, and the data were analyzed statistically using two-way ANOVA and Tukey tests, with a significance level of 5%. RESULTS: The percentage of marginal gaps was significantly lower in the Bio-C sealer than in AH Plus Jet (p=0.021) regardless of the technique. However, no difference was found in the percentage of voids between root canal filling techniques and the endodontic sealer (p>0.05). CONCLUSION: Both sealers and techniques demonstrated good quality of root canal filling. However, the use of the Bio-C sealer enhanced the filling ability by reducing marginal gaps, regardless of the root canal filling technique. CLINICAL RELEVANCE: This study highlights the better performance of the Bio-C sealer in the quality of the root canal filling, reducing marginal gaps when compared to AH Plus Jet independent of the technique.

pH influences the volumetric change of calcium silicate- and epoxy resin-based root canal sealers: An ex vivo micro-CT study.

This study assessed the influence of pH variation on the volumetric change of EndoSequence BC Sealer compared to AH Plus Jet. Eighteen single-rooted teeth were uniformly prepared and filled with one of the sealers. After 24-h storing, samples were scanned in a micro-CT device. Then, roots were immersed in 20 ml phosphate-buffered saline (PBS) with pH of 5, 7 or 12 at 37°C for 7 and 30 days and rescanned. Statistical analysis was performed using Shapiro-Wilk's test, one-way ANOVA and Tukey's or Student's t-tests (p < 0.05). Differences between sealers were observed only at neutral pH and after 30 days of acidic pH exposure, with a higher loss of EndoSequence (p < 0.05). After 7 days, alkaline pH reduced and increased the volumetric loss of EndoSequence and AH Plus, respectively, compared to neutral pH (p < 0.05). It can be concluded that the pH directly influenced the volumetric change of both tested root canal sealers in different ways.

Effects of Two In-Office Bleaching Agents with Different Compositions on the Bond Strength to Enamel.

This study evaluates the effect of two in-office bleaching agents with different compositions on the bond strength to enamel surface. Fifty bovine teeth were divided into five groups (n = 10 teeth per group), according to the bleaching agent used and the time elapsed to perform the restorative procedures: restorative procedures performed without bleaching (control group); bleaching with 35% hydrogen peroxide (HP), with restorative procedures 24 hours or 7 days after bleaching (HP/24h and HP/7d groups, respectively); and bleaching with 35% HP with calcium compost, with restorative procedures 24 hours or 7 days after bleaching (HP AutoMixx/24h and HP AutoMixx/7d groups, respectively). The specimens were stored at 37°C in artificial saliva. Restored teeth were submitted to a micro-shear bond strength test. The specimens were analyzed using a stereoscope to determine the fracture pattern, classified as adhesive, cohesive, or mixed. The results of the bond strength test were evaluated by analysis of variance, with significance set at P < .05. The groups showed similar bond strength values without significant difference among them (P > .05). There was a predominance of the adhesive-type fracture pattern in all groups. The bleaching agents with different compositions showed similar bond strength values when the restoration was performed 24 hours and 7 days after bleaching, and the results were similar to the control group.

The thermoplastic techniques or single-cone technique on the quality of root canal filling with tricalcium silicate-based sealer: An integrative review.

Background: The filling of the root canal system (RCS) is an important step in endodontic treatment and aims to obtain a three-dimensional sealing of the root canal spaces to prevent bacterial contamination. For this, the selection of an appropriate sealer must be performed synchronously with the choice of the root canal filling technique. This study aims, through an integrative review, to evaluate the quality of root canal filling by comparing thermoplastic and single-cone (SC) techniques. Material and Methods: The Medline/PubMed, Scopus, Web of Science and Virtual Health Library (VHL) databases were used to find articles published until November 2021. The eligibility criteria comprised articles that evaluating the quality of root canal filling comparing thermoplastic techniques with the SC technique using tricalcium silicate-based sealer. Studies that evaluated primary teeth, endodontic retreatment or perforations, different outcomes, and studies that considered artificial teeth or different sealer and material for obturation of different techniques were excluded. For articles that were not available for access, an additional contact with authors were considered. A total of 1699 articles were found. After duplicate removal, the title and abstract of 828 articles were screened. Sixteen articles were considered for full-text analysis, but only ten articles met the eligibility criteria. Data extracted from the studies were discussed and tabulated to allow the comparison of desired factors. Results: Concerning the formation of gaps/voids, the thermoplastic techniques showed better results than the SC technique in 3 articles. On the other hand, 2 articles reported no statistical difference between the tested techniques. In addition, about the penetration of tricalcium silicate-based sealer in the dentinal tubules, of the 5 articles selected, in 4 there was no significant difference between the tested techniques and only one study showed better penetration of the sealer when using thermoplastic techniques. Conclusions: The thermoplastic technique was better in most selected studies regarding gaps and voids, but regarding the penetration of the sealer into the tubules, both techniques were effective. Key words:Root canal filling, thermoplastic techniques, tricalcium silicate.

Impact of Minimally Invasive Endodontic Procedures on the Development of Dentinal Microcracks.

INTRODUCTION: To evaluate the impact of root canal preparation in teeth with ultraconservative access cavities (UltraAC) on the development of dentinal microcracks using a nondestructive longitudinal micro-computed tomography (micro-CT) imaging experimental model. Root canal preparation in teeth with traditional access cavities (TradAC) was used as control. METHODS: Forty mandibular molars were scanned in a micro-CT device, anatomically matched, and distributed into 4 groups according to the type of access cavity and instrumentation system: traditional/Reciproc (TradAC/RC), traditional/XP-endo Shaper (TradAC/XP), ultraconservative/Reciproc (UltraAC/RC), and ultraconservative/XP-endo Shaper (UltraAC/XP). After root canal preparation, the teeth were rescanned. After reconstruction and co-registration procedures, the images were screened from the furcation level to the apex to identify the presence of dentinal microcracks. RESULTS: From a total of 15,340 cross-section images, 19.65% (3014 slices) had some dentinal microcracks. The qualitative analysis demonstrated the presence of some dentinal microcracks in 11%, 33%, 19%, and 15% of the images of cross-sections in TradAC/RC, TradAC/XP, UltraAC/RC, and UltraAC/XP groups, respectively. All dentinal microcracks observed after root canal preparation were already present in the corresponding images before canal instrumentation. Therefore, no new microcracks were detected, regardless of the access cavity and root canal instrumentation system. CONCLUSIONS: Root canal preparation with Reciproc or XP-endo Shaper under traditional or ultraconservative access cavities did not create dentinal microcracks in extracted mandibular molars.

Photodynamic therapy for root canal disinfection in endodontics: an umbrella review.

To evaluate and synthesize the evidence from the individual reviews that evaluated the efficacy of PDT therapy in root canal disinfection by undertaking an umbrella review. The protocol of the review was registered in the PROSPERO database under number CRD42021214056. The literature search was conducted using the following electronic databases: PubMed, Scopus, Web of Science, BVS, Cochrane Database of Systematic Reviews, Embase, and Epistemonikos, from inception to July 2021. Systematic reviews that evaluated the efficacy of PDT for root canal disinfection were included. Two authors independently performed a literature search, data extraction, and quality assessment of the included studies. Any disagreements were resolved by a third reviewer. The quality of the reviews was assessed using the AMSTAR 2 tool and the final categorization of each systematic reviews was classified as of "high," "moderate," "low," or "critically low" quality. Six systematic reviews were included in the current umbrella review and all of them were graded as critically low quality. From the critically low-quality evidence available, this umbrella review showed that the efficacy of PDT in root canal disinfection remains yet undetermined.

The Impact of TruNatomy and ProTaper Gold Instruments on the Preservation of the Periradicular Dentin and on the Enlargement of the Apical Canal of Mandibular Molars.

INTRODUCTION: This study aimed to evaluate the preservation of periradicular dentin and the enlargement of the apical canal of mandibular molars with TruNatomy (Dentsply Sirona, Ballaigues, Switzerland) and ProTaper Gold (Dentsply Sirona) instruments. METHODS: Twenty mandibular molars were scanned in a micro-computed tomographic device, anatomically paired, and distributed into 2 groups (n = 10). In the ProTaper Gold group, mesial and distal canals were prepared up to F2 (25/.08v) and F3 (30/.09v) instruments, whereas in the TruNatomy group, mesial and distal canals were enlarged up to the prime (26/.04v) and medium (36/.03v) instruments, respectively. After a new scan, the surface area, volume, unprepared areas, transportation, percentage of dentin removal, and dentin thickness parameters were calculated. Data were compared between groups using the Mann-Whitney test, the Student t test, and the nonmetric multidimensional scaling test with alpha set at 5%. RESULTS: No difference was found between groups regarding unprepared canal areas and the reduction of dentin thickness (P > .05). Transportation was lower than 0.1 mm in all groups, and statistical differences were observed only at the apical third of the mesiobuccal canal with lower values in the TruNatomy group. ProTaper Gold removed more dentin than TruNatomy at the coronal level of mesial roots (1.8% and 1.0%, respectively) (P < .05). CONCLUSIONS: TruNatomy and ProTaper Gold were efficient for performing canal preparation in mandibular molars. The tested systems were similar in terms of untouched canal walls and remaining dentin thickness and slightly different in the apical transportation of mesial canals and the percentage of dentin removal at the coronal third but without clinically significant errors.

Assessment of marginal gaps and image quality of crowns made of two different restorative materials: An in vitro study using CBCT images.

Background: The present study assessed the quality of images and the presence of marginal gaps on cone-beam computed tomography (CBCT) images of teeth restored with all-ceramic and metal-ceramic crowns and compared the gap sizes observed on CBCT images with those obtained on micro-CT images. Methods: Thirty teeth restored with metal-ceramic and all-ceramic crowns, properly adapted and with gaps of 0.30 and 0.50 mm, were submitted to micro-CT and CBCT scans. Linear measurements corresponding to the marginal gap (MG) and the absolute marginal discrepancy (AMD) were obtained. The objective assessment of the quality of CBCT images was performed using the contrast-to-noise ratio (CNR), and the subjective assessment was defined by the diagnoses made by five examiners regarding the presence or absence of gaps. Results: The measurements were always higher for CBCT, with a significant difference regarding AMD. No significant difference in image quality was observed using CNR between the crowns tested. Low accuracy and sensitivity values could be observed for both crowns. Conclusion: Marginal mismatch measures were overestimated in CBCT images. No difference in image quality was observed between the crowns. The correct diagnosis of gaps was considered low, irrespective of crown type and gap size.

Marginal gaps and voids of three root-end filling materials: A microcomputed tomographic study.

A root-end filling material is required to fill the root-end cavity without gaps or voids, to prevent root canal reinfection and to provide periapical healing. Thus, this study evaluated the volume of marginal gaps and voids of three root-end filling materials using microcomputed tomography (micro-CT). Thirty maxillary incisors were prepared and filled with gutta-percha and endodontic sealer. The specimens were scanned using micro-CT and distributed into three groups (n = 10): White MTA, MTA Repair HP, and Bio-C Repair. The root tips were resected at 90° to the longitudinal axis and the cavity (3 mm depth) was prepared with an ultrasonic tip. The materials were handled, and the cavities were filled. The specimens were rescanned and the percentual volume of gaps and voids were analyzed. The data were analyzed using Kruskal-Wallis and Dunn tests (p < .05). No statistical difference was found in the percentage of gaps among the tested materials (p > .05). White MTA presented less voids than Bio-C and MTA Repair HP (p < .05). The materials presented a similar percentual volume of gaps and White MTA presented less voids than other tested materials.

Effect of passive ultrasonic irrigation on hard tissue debris removal: a systematic review and meta-analysis.

Accumulated hard tissue debris (AHTD) in root canal irregularities may negatively impact adequate root canal disinfection. In light of this, the efficacy of passive ultrasonic irrigation (PUI) to reduce AHTD has been largely studied in in vitro studies, which have adopted different analytic methods of varying accuracy to determine the extent of AHTD more correctly. Therefore, the aim of this study was to compare how well PUI and non-activated irrigation (NAI) systems perform in reducing AHTD during final irrigation protocols, based exclusively on studies whose analyses used microCT scanning. A systematic search of the studies published up to April 2020 was performed using MeSH terms and free terms, in the following databases: PubMed, Scopus, Web of Science, BVS (Lilacs and BBO) and Embase. The inclusion criteria consisted of laboratory studies that evaluated the amount of AHTD, and compared PUI with NAI protocols using microCT analysis. The risk of bias in the selected studies was assessed critically by two reviewers. A meta-analysis was performed using the RevMan software program (P<0.05), and included studies providing the standardized mean difference (SMD), using a fixed effect model, and adopting a confidence interval of 95%. In all, 3495 studies were identified, three of which met the inclusion criteria. All three were considered as having a low risk of bias. The meta-analysis comparing the ability of PUI and NAI protocols to remove hard tissue debris showed a higher percentage of AHTD reduction (P<0.01) for PUI, with a confidence interval of 1.41 [0.79, 2.02]. The heterogeneity among the studies was 82% (I2). Considering the limitations of the present study, this systematic review and meta-analysis showed that PUI was more effective than NAI in removing hard tissue debris, based exclusively on studies that used microCT scanning to provide a more precise analysis of the two techniques used. The findings presented in the present study reinforce the concept that PUI can increase residue removal and improve the cleanliness of the root canal in endodontic treatments.

Influência do pré-alargamento coronário na resistência à fadiga cíclica de instrumentos reciprocantes tratados termicamente / Influence of coronal pre-enlargement on cyclic fatigue resistance of heat-treated reciprocating instruments

Objetivo: O objetivo do presente estudo foi avaliar a influência do pré-alargamento coronário na resistência à fadiga cíclica de dois instrumentos reciprocantes tratados termicamente. Métodos: 20 instrumentos Reciproc Blue (R25 Blue) e 20 instrumentos X1 Blue (X1) foram utilizados para instrumentar blocos de resina simulando um molar superior com três canais radiculares. Os dentes foram divididos em quatro grupos (n=10), de acordo com o instrumento e com a técnica de instrumentação utilizada: grupos R25 e X1 - instrumentação com R25 Blue (25/0.08) ou X1 Blue (25/0.06), respectivamente, sem alargamento prévio; e grupos R25 ou X1 + pré-alargamento cervical - pré-alargamento com os instrumentos ProTaper Universal SX e S1 antes da instrumentação com R25 Blue ou X1. Os instrumentos foram testados com relação à fadiga cíclica utilizando-se um canal simulado de aço inoxidável com ângulo de curvatura de 86 graus e raio de curvatura de 6 mm. Os instrumentos foram acionados utilizando-se o movimento "RECIPROC ALL" do motor endodôntico (VDW) e o tempo de instrumentação até a fratura do instrumento foi contabilizado. Os resultados foram analisados pelo teste t de Student (p<0,05). Resultados: Os instrumentos X1 apresentaram maior resistência à fadiga cíclica do que R25 Blue em ambas as condições testadas (p<0,05). Não houve diferença entre os grupos com e sem pré-alargamento coronário para os instrumentos R25 Blue e X1 (p>0,05). Conclusão: O instrumento X1 Blue apresentou maior resistência à fadiga cíclica do que o Reciproc Blue. O pré-alargamento coronário não foi capaz de aumentar a resistência à fratura por fadiga cíclica dos instrumentos testados (AU).

Objective: The aim of this study was to evaluate the influence of cervical pre-flaring on the cyclic fatigue resistance of two heat-treated reciprocating instruments. Methods: 20 Reciproc Blue (R25 Blue) instruments e 20 X1 Blue File (X1) were used to instrument resin blocks simulating an upper molar with 3 root canals. The specimens were divided into four groups (n=10) according the instrument and type of instrumentation used: R25 and X1 groups: root canal preparation with R25 Blue (25/0.08) ou X1 Blue (25/0.06), without cervical pre-flaring; R25 or X1 + cervical pre-flaring- pre-flaring with ProTaper Universal SX e S1 before instrumentation with R25 Blue or X1 blue. After instrumentation the instruments were tested for cyclic fatigue using a simulated stainless steel root canal with 86 degree bending angle and 6 mm bending radius. The instruments were triggered using the "RECIPROC ALL" motion of a reciprocating endodontic motor (VDW) and the instrumentation time until instrument fracture was accounted. Results were analyzed by Students t-test (p<0.05). Results: Statistical analysis showed that the X1 Blue showed higher resistance to cyclic fatigue than the R25 Blue under both conditions tested (p<0.05). There were no differences between the groups with and without coronary pre-flaring for the R25 Blue and X1 Blue (p<0.05). Conclusion: X1 Blue showed higher resistance to cyclic fatigue than the R25 Blue. The cervical pre-flaring did not increased the resistance to cyclic fatigue fracture of the tested instruments (AU)

Shaping ability and apical debris extrusion after root canal preparation with rotary or reciprocating instruments: a micro-CT study.

OBJECTIVES: The aim of this study was to evaluate the shaping ability of the TruShape and Reciproc Blue systems and the apical extrusion of debris after root canal instrumentation. The ProTaper Universal system was used as a reference for comparison. MATERIALS AND METHODS: Thirty-three mandibular premolars with a single canal were scanned using micro-computed tomography and were matched into 3 groups (n = 11) according to the instrumentation system: TruShape, Reciproc Blue and ProTaper Universal. The teeth were accessed and mounted in an apparatus with agarose gel, which simulated apical resistance provided by the periapical tissue and enabled the collection of apically extruded debris. During root canal preparation, 2.5% sodium hypochlorite was used as an irrigant. The samples were scanned again after instrumentation. The percentage of unprepared area, removed dentin, and volume of apically extruded debris were analyzed. The data were analyzed using 1-way analysis of variance and the Tukey test for multiple comparisons at a 5% significance level. RESULTS: No significant differences in the percentage of unprepared area were observed among the systems (p > 0.05). ProTaper Universal presented a higher percentage of dentin removal than the TruShape and Reciproc Blue systems (p < 0.05). The systems produced similar volumes of apically extruded debris (p > 0.05). CONCLUSIONS: All systems caused apically extruded debris, without any significant differences among them. TruShape, Reciproc Blue, and ProTaper Universal presented similar percentages of unprepared area after root canal instrumentation; however, ProTaper Universal was associated with higher dentin removal than the other systems.