Nonlinear pulse compression to 51-W average power GW-class 35-fs pulses at 2-µm wavelength in a gas-filled multi-pass cell.

We report on the generation of GW-class peak power, 35-fs pulses at 2-µm wavelength with an average power of 51 W at 300-kHz repetition rate. A compact, krypton-filled Herriott-type cavity employing metallic mirrors is used for spectral broadening. This multi-pass compression stage enables the efficient post compression of the pulses emitted by an ultrafast coherently combined thulium-doped fiber laser system. The presented results demonstrate an excellent preservation of the input beam quality in combination with a power transmission as high as 80%. These results show that multi-pass cell based post-compression is an attractive alternative to nonlinear spectral broadening in fibers, which is commonly employed for thulium-doped and other mid-infrared ultrafast laser systems. Particularly, the average power scalability and the potential to achieve few-cycle pulse durations make this scheme highly attractive.

Table-top interferometry on extreme time and wavelength scales.

Short-pulse metrology and dynamic studies in the extreme ultraviolet (XUV) spectral range greatly benefit from interferometric measurements. In this contribution a Michelson-type all-reflective split-and-delay autocorrelator operating in a quasi amplitude splitting mode is presented. The autocorrelator works under a grazing incidence angle in a broad spectral range (10 nm - 1 µm) providing collinear propagation of both pulse replicas and thus a constant phase difference across the beam profile. The compact instrument allows for XUV pulse autocorrelation measurements in the time domain with a single-digit attosecond precision and a useful scan length of about 1 ps enabling a decent resolution of E/ΔE = 2000 at 26.6 eV. Its performance for selected spectroscopic applications requiring moderate resolution at short wavelengths is demonstrated by characterizing a sharp electronic transition at 26.6 eV in Ar gas. The absorption of the 11th harmonic of a frequency-doubled Yb-fiber laser leads to the well-known 3s3p64p1P1 Fano resonance of Ar atoms. We benchmark our time-domain interferometry results with a high-resolution XUV grating spectrometer and find an excellent agreement. The common-path interferometer opens up new opportunities for short-wavelength femtosecond and attosecond pulse metrology and dynamic studies on extreme time scales in various research fields.

Bright, high-repetition-rate water window soft X-ray source enabled by nonlinear pulse self-compression in an antiresonant hollow-core fibre.

Bright, coherent soft X-ray radiation is essential to a variety of applications in fundamental research and life sciences. To date, a high photon flux in this spectral region can only be delivered by synchrotrons, free-electron lasers or high-order harmonic generation sources, which are driven by kHz-class repetition rate lasers with very high peak powers. Here, we establish a novel route toward powerful and easy-to-use SXR sources by presenting a compact experiment in which nonlinear pulse self-compression to the few-cycle regime is combined with phase-matched high-order harmonic generation in a single, helium-filled antiresonant hollow-core fibre. This enables the first 100 kHz-class repetition rate, table-top soft X-ray source that delivers an application-relevant flux of 2.8 × 106 photon s-1 eV-1 around 300 eV. The fibre integration of temporal pulse self-compression (leading to the formation of the necessary strong-field waveforms) and pressure-controlled phase matching will allow compact, high-repetition-rate laser technology, including commercially available systems, to drive simple and cost-effective, coherent high-flux soft X-ray sources.

Carrier-envelope offset stable, coherently combined ytterbium-doped fiber CPA delivering 1 kW of average power.

We present a carrier-envelope offset (CEO) stable ytterbium-doped fiber chirped-pulse amplification system employing the technology of coherent beam combining and delivering more than 1 kW of average power at a pulse repetition rate of 80 MHz. The CEO stability of the system is 220 mrad rms, characterized out-of-loop with an f-to-2f interferometer in a frequency offset range of 10 Hz to 20 MHz. The high-power amplification system boosts the average power of the CEO stable oscillator by five orders of magnitude while increasing the phase noise by only 100 mrad. No evidence of CEO noise deterioration due to coherent beam combining is found. Low-frequency CEO fluctuations at the chirped-pulse amplifier are suppressed by a "slow loop" feedback. To the best of our knowledge, this is the first demonstration of a coherently combined laser system delivering an outstanding average power and high CEO stability at the same time.

High energy redshifted and enhanced spectral broadening by molecular alignment.

We demonstrate an efficient approach for enhancing the spectral broadening of long laser pulses and for efficient frequency redshifting by exploiting the intrinsic temporal properties of molecular alignment inside a gas-filled hollow-core fiber (HCF). We find that laser-induced alignment with durations comparable to the characteristic rotational time scale TRotAlign enhances the efficiency of redshifted spectral broadening compared to noble gases. The applicability of this approach to Yb lasers with (few hundred femtoseconds) long pulse duration is illustrated, for which efficient broadening based on conventional Kerr nonlinearity is challenging to achieve. Furthermore, this approach proposes a practical solution for high energy broadband long-wavelength light sources, and it is attractive for many strong field applications.

Watt-scale 50-MHz source of single-cycle waveform-stable pulses in the molecular fingerprint region.

We report a coherent mid-infrared (MIR) source with a combination of broad spectral coverage (6-18 µm), high repetition rate (50 MHz), and high average power (0.5 W). The waveform-stable pulses emerge via intrapulse difference-frequency generation (IPDFG) in a GaSe crystal, driven by a 30-W-average-power train of 32-fs pulses spectrally centered at 2 µm, delivered by a fiber-laser system. Electro-optic sampling (EOS) of the waveform-stable MIR waveforms reveals their single-cycle nature, confirming the excellent phase matching both of IPDFG and of EOS with 2-µm pulses in GaSe.

High-flux ultrafast extreme-ultraviolet photoemission spectroscopy at 18.4 MHz pulse repetition rate.

Laser-dressed photoelectron spectroscopy, employing extreme-ultraviolet attosecond pulses obtained by femtosecond-laser-driven high-order harmonic generation, grants access to atomic-scale electron dynamics. Limited by space charge effects determining the admissible number of photoelectrons ejected during each laser pulse, multidimensional (i.e. spatially or angle-resolved) attosecond photoelectron spectroscopy of solids and nanostructures requires high-photon-energy, broadband high harmonic sources operating at high repetition rates. Here, we present a high-conversion-efficiency, 18.4-MHz-repetition-rate cavity-enhanced high harmonic source emitting 5 × 105 photons per pulse in the 25-to-60-eV range, releasing 1 × 1010 photoelectrons per second from a 10-µm-diameter spot on tungsten, at space charge distortions of only a few tens of meV. Broadband, time-of-flight photoelectron detection with nearly 100% temporal duty cycle evidences a count rate improvement between two and three orders of magnitude over state-of-the-art attosecond photoelectron spectroscopy experiments under identical space charge conditions. The measurement time reduction and the photon energy scalability render this technology viable for next-generation, high-repetition-rate, multidimensional attosecond metrology.

Ultrafast thulium fiber laser system emitting more than 1 kW of average power.

In this Letter, we report on the generation of 1060 W average power from an ultrafast thulium-doped fiber chirped pulse amplification system. After compression, the pulse energy of 13.2 µJ with a pulse duration of 265 fs at an 80 MHz pulse repetition rate results in a peak power of 50 MW spectrally centered at 1960 nm. Even though the average heat-load in the fiber core is as high as 98 W/m, we confirm the diffraction-limited beam quality of the compressed output. Furthermore, the evolution of the relative intensity noise with increasing average output power has been measured to verify the absence of transversal mode instabilities. This system represents a new average power record for thulium-doped fiber lasers (1150 W uncompressed) and ultrashort pulse fiber lasers with diffraction-limited beam quality, in general, even considering single-channel ytterbium-doped fiber amplifiers.

High-power frequency comb at 2 µm wavelength emitted by a Tm-doped fiber laser system.

We report on the generation of a high-power frequency comb in the 2 µm wavelength regime featuring high amplitude and phase stability with unprecedented laser parameters, combining 60 W of average power with <30 fs pulse duration. The key components of the system are a mode-locked Er:fiber laser, a coherence-preserving nonlinear broadening stage, and a high-power Tm-doped fiber chirped-pulse amplifier with subsequent nonlinear self-compression of the pulses. Phase locking of the system resulted in a phase noise of less than 320 mrad measured within the 10 Hz-30 MHz band and 30 mrad in the band from 10 Hz to 1 MHz.

Thulium-doped nonlinear fiber amplifier delivering 50 fs pulses at 20 W of average power.

In this Letter, we present an optimized nonlinear amplification scheme in the 2 µm wavelength region. This laser source delivers 50 fs pulses at an 80 MHz repetition rate with exceptional temporal pulse quality and 20 W of average output power. According to predictions from numerical simulations, it is experimentally confirmed that dispersion management is crucial to prevent the growth of side pulses and an increase of the energy content in a temporal pedestal surrounding the self-compressed pulse. Based on these results, we discuss guidelines to ensure high temporal pulse quality from nonlinear femtosecond fiber amplifiers in the anomalous dispersion regime.

Annular beam driven high harmonic generation for high flux coherent XUV and soft X-ray radiation.

Separation of the high average power driving laser beam from the generated XUV to soft-X-ray radiation poses great challenges in collinear HHG setups due to the losses and the limited power handling capabilities of the typically used separating optics. This paper demonstrates the potential of driving HHG with annular beams, which allow for a straightforward and power scalable separation via a simple pinhole, resulting in a measured driving laser suppression of 5⋅10-3. The approach is characterized by an enormous flexibility as it can be applied to a broad range of input parameters and generated photon energies. Phase matching aspects are analyzed in detail and an HHG conversion efficiency that is only 27% lower than using a Gaussian beam under identical conditions is demonstrated, revealing the viability of the annular beam approach for high flux coherent short-wavelength sources and high average power driving lasers.

High resolution XUV Fourier transform holography on a table top.

Today, coherent imaging techniques provide the highest resolution in the extreme ultraviolet (XUV) and X-ray regions. Fourier transform holography (FTH) is particularly unique, providing robust and straightforward image reconstruction at the same time. Here, we combine two important advances: First, our experiment is based on a table-top light source which is compact, scalable and highly accessible. Second, we demonstrate the highest resolution ever achieved with FTH at any light source (34 nm) by utilizing a high photon flux source and cutting-edge nanofabrication technology. The performance, versatility and reliability of our approach allows imaging of complex wavelength-scale structures, including wave guiding effects within these structures, and resolving embedded nanoscale features, which are invisible for electron microscopes. Our work represents an important step towards real-world applications and a broad use of XUV imaging in many areas of science and technology. Even nanoscale studies of ultra-fast dynamics are within reach.

Thermal analysis of Yb-doped high-power fiber amplifiers with Al:P co-doped cores.

It has been recently shown that photodarkening can significantly reduce the mode instability threshold in high power Yb-doped fiber amplifiers, thus resulting in an even more severe limitation to the scaling of the output average power of these systems. Therefore, an efficient reduction of photodarkening in an Yb-doped active fiber will lead to very significant gains in the output average power delivered by such systems. In this context, it has been reported that photodarkening can be significantly mitigated when co-doping a fiber core with Al and P, which makes this approach potentially appealing to increase the TMI threshold. Unfortunately co-doping the fiber core with Al and P also alters the effective cross-sections of the fiber, which has repercussion in the amplification efficiency. Thus, a fiber with a higher P concentration will exhibit lower cross-sections, therefore requiring a higher Yb-ion concentration to reach a certain desired amplification efficiency. However, increasing the Yb-ion concentration leads to higher photodarkening losses, which might potentially counteract the benefits of using P co-doping. In this paper we present a comparative analysis of the expected performance of different fiber amplifiers for a given constant average heat-load and amplification efficiency as a function of the ratio of Al:P concentration in the fiber core. This study indicates which core compositions are more beneficial for increasing the mode instability threshold in Yb-doped high-power fiber amplifier systems.

Coherently combined 16-channel multicore fiber laser system.

We present a coherently combined laser amplifier with 16 channels from a multicore fiber in a proof-of-principle demonstration. Filled-aperture beam splitting and combination, together with temporal phasing, is realized in a compact and low-component-count setup. Combined average power of up to 70 W with 40 ps pulses is achieved with combination efficiencies around 80%.

Nonlinear pulse compression to 43 W GW-class few-cycle pulses at 2 µm wavelength.

High-average power laser sources delivering intense few-cycle pulses in wavelength regions beyond the near infrared are promising tools for driving the next generation of high-flux strong-field experiments. In this work, we report on nonlinear pulse compression to 34.4 µJ-, 2.1-cycle pulses with 1.4 GW peak power at a central wavelength of 1.82 µm and an average power of 43 W. This performance level was enabled by the combination of a high-repetition-rate ultrafast thulium-doped fiber laser system and a gas-filled antiresonant hollow-core fiber.

Acceleration of sub-relativistic electrons with an evanescent optical wave at a planar interface.

We report on a theoretical and experimental study of the energy transfer between an optical evanescent wave, propagating in vacuum along the planar boundary of a dielectric material, and a beam of sub-relativistic electrons. The evanescent wave is excited via total internal reflection in the dielectric by an infrared (λ = 2 µm) femtosecond laser pulse. By matching the electron propagation velocity to the phase velocity of the evanescent wave, energy modulation of the electron beam is achieved. A maximum energy gain of 800 eV is observed, corresponding to the absorption of more than 1000 photons by one electron. The maximum observed acceleration gradient is 19 ± 2 MeV/m. The striking advantage of this scheme is that a structuring of the acceleration element's surface is not required, enabling the use of materials with high laser damage thresholds that are difficult to nano-structure, such as SiC, Al2O3 or CaF2.

Single mode 4.3 kW output power from a diode-pumped Yb-doped fiber amplifier.

We investigate the average power scaling of two diode-pumped Yb-doped fiber amplifiers emitting a diffraction-limited beam. The first fiber under investigation with a core diameter of 30 µm was able to amplify a 10 W narrow linewidth seed laser up to 2.8 kW average output power before the onset of transverse mode instabilities (TMI). A further power scaling was achieved using a second fiber with a smaller core size (23µm), which allowed for a narrow linewidth output power of 3.5 kW limited by stimulated Brillouin scattering (SBS). We mitigated SBS using a spectral broadening mechanism, which allowed us to further increase the output power to 4.3 kW only limited by the available pump power. Up to this power level, a high slope efficiency of 90% with diffraction-limited beam quality and without any sign of TMI or stimulated Raman scattering for a spectral dynamic range of higher than -80 dB was obtained.

High average power nonlinear compression to 4 GW, sub-50 fs pulses at 2 µm wavelength.

The combination of high-repetition-rate ultrafast thulium-doped fiber laser systems and gas-based nonlinear pulse compression in waveguides offers promising opportunities for the development of high-performance few-cycle laser sources at 2 µm wavelength. In this Letter, we report on a nonlinear pulse compression stage delivering 252 µJ, sub-50 fs-pulses at 15.4 W of average power. This performance level was enabled by actively mitigating ultrashort pulse propagation effects induced by the presence of water vapor absorptions.

Phase-stable, multi-µJ femtosecond pulses from a repetition-rate tunable Ti:Sa-oscillator-seeded Yb-fiber amplifier.

We present a high-power, MHz-repetition-rate, phase-stable femtosecond laser system based on a phase-stabilized Ti:Sa oscillator and a multi-stage Yb-fiber chirped-pulse power amplifier. A 10-nm band around 1030 nm is split from the 7-fs oscillator output and serves as the seed for subsequent amplification by 54 dB to 80 W of average power. The µJ-level output is spectrally broadened in a solid-core fiber and compressed to ~30 fs with chirped mirrors. A pulse picker prior to power amplification allows for decreasing the repetition rate from 74 MHz by a factor of up to 4 without affecting the pulse parameters. To compensate for phase jitter added by the amplifier to the feed-forward phase-stabilized seeding pulses, a self-referencing feed-back loop is implemented at the system output. An integrated out-of-loop phase noise of less than 100 mrad was measured in the band from 0.4 Hz to 400 kHz, which to the best of our knowledge corresponds to the highest phase stability ever demonstrated for high-power, multi-MHz-repetition-rate ultrafast lasers. This system will enable experiments in attosecond physics at unprecedented repetition rates, it offers ideal prerequisites for the generation and field-resolved electro-optical sampling of high-power, broadband infrared pulses, and it is suitable for phase-stable white light generation.

High speed and high resolution table-top nanoscale imaging.

We present a table-top coherent diffractive imaging (CDI) experiment based on high-order harmonics generated at 18 nm by a high average power femtosecond fiber laser system. The high photon flux, narrow spectral bandwidth, and high degree of spatial coherence allow for ultrahigh subwavelength resolution imaging at a high numerical aperture. Our experiments demonstrate a half-pitch resolution of 15 nm, close to the actual Abbe limit of 12 nm, which is the highest resolution achieved from any table-top extreme ultraviolet (XUV) or x-ray microscope. In addition, sub-30 nm resolution was achieved with only 3 s of integration time, bringing live diffractive imaging and three-dimensional tomography on the nanoscale one step closer to reality. The current resolution is solely limited by the wavelength and the detector size. Thus, table-top nanoscopes with only a few-nanometer resolutions are in reach and will find applications in many areas of science and technology.