Monomer-Recyclable Polyester from CO2 and 1,3-Butadiene.

Synthesis of monomer-recyclable polyesters solely from CO2 and bulk olefins holds great potential in significantly reducing CO2 emissions and addressing the issue of plastic pollution. Due to the kinetic disadvantage of direct copolymerization of CO2 and bulk olefins compared to homopolymerization of bulk olefins, considerable research attention has been devoted to synthesis of polyester via the ring-opening polymerization (ROP) of a six-membered disubstituted lactone intermediate, 1,2-ethylidene-6-vinyl-tetrahydro-2H-pyran-2-one (𝜹-L), obtained from telomerization of CO2 and 1,3-butadiene. However, the conjugate olefin on the six-membered ring of 𝜹-L leads to serious Michael addition side reactions. Thus, the selective ROP of 𝜹-L, which can precisely control the repeating unit for the production of polyesters potentially amenable to efficient monomer recycling, remains an unresolved challenge. Herein, the first example of selective ROP of 𝜹-L is reported using a combination of organobase and N,N'-Bis[3,5-bis(trifluoromethyl)phenyl]urea as the catalytic system. Systematic modifications of the substituent of the urea show that the presence of electron-deficient 3,5-bis(trifluoromethyl)-phenyl groups is the key to the extraordinary selectivity of ring opening over Michael addition. Efficient monomer recovery of oligo(𝜹-L) is also achieved under mild catalytic conditions.

What Metals Should Be Used to Mediate Electrosynthesis of Ammonia from Nitrogen and Hydrogen from a Thermodynamic Standpoint?

Recently, metal-mediated electrochemical conversion of nitrogen and hydrogen to ammonia (M-eNRRs) has been attracting intense research attention as a potential route for ammonia synthesis under ambient conditions. However, which metals should be used to mediate M-eNRRs remains unanswered. This work provides an extensive comparison of the energy consumption in the classical Haber Bosch (H-B) process and the M-eNRRs. The results indicate that when employing lithium and calcium, metals popularly used to mediate the M-eNRRs, the energy consumption is more than 10 times greater than that of the H-B process even assuming a 100% Faradaic efficiency and zero overpotentials. Only electrosynthesis with a cell voltage not exceeding 0.38 V might have the potential to rival the H-B process from an energetic perspective. A further analysis of other metals in the periodic table reveals that only some heavy metals, including In, Tl, Co, Ni, Ga, Mo, Sn, Pb, Fe, W, Ge, Re, Bi, Cu, Po, Tc, Ru, Rh, Ag, Hg, Pd, Ir, Pt, and Au, can potentially consume less energy than that of the H-B process purely from a thermodynamic standpoint, but whether they can activate N2 under ambient conditions is yet to be explored. This work shows the importance of performing thermodynamic analysis for the development of an innovative strategy to synthesize ammonia with the ultimate goal of replacing the H-B process on a large scale.

Sustainable Copolymer Synthesis from Carbon Dioxide and Butadiene.

Carbon dioxide (CO2) has long been recognized as an ideal C1 feedstock comonomer for producing sustainable materials because it is renewable, abundant, and cost-effective. However, activating CO2 presents a significant challenge because it is highly oxidized and stable. A CO2/butadiene-derived δ-valerolactone (EVP), generated via palladium-catalyzed telomerization between CO2 and butadiene, has emerged as an attractive intermediate for producing sustainable copolymers from CO2 and butadiene. Owing to the presence of two active carbon-carbon double bonds and a lactone unit, EVP serves as a versatile intermediate for creating sustainable copolymers with a CO2 content of up to 29 wt % (33 mol %). In this Review, advances in the synthesis of copolymers from CO2 and butadiene with divergent structures through various polymerization protocols have been summarized. Achievements made in homo- and copolymerization of EVP or its derivatives are comprehensively reviewed, while the postmodification of the obtained copolymers to access new polymers are also discussed. Meanwhile, potential applications of the obtained copolymers are also discussed. The literature references were sorted into sections based on polymerization strategies and mechanisms, facilitating readers in gaining a comprehensive view of the present chemistry landscape and inspiring innovative approaches to synthesizing novel CO2-derived copolymers.

Experimentally-calibrated estimation of CO2 removal potentials of enhanced weathering.

Enhanced weathering (EW) of (ultra)mafic rocks is widely considered as a promising option for carbon dioxide removal (CDR). However, accurately measuring its CDR potential remains unavailable due to sluggish weathering process. Previous models have estimated annual CDR potentials ranging from 1 to 95 Gt by 2100, with the maximum significantly exceeding the anthropogenic CO2 emissions in 2021 (approximately 41 Gt). This raises concerns that a misconception may arise, suggesting active mitigations of CO2 emissions might not be necessary. Herein, we address this issue by partitioning the CDR potential of EW into two components, flow-through and non-flow-through processes, and develop an experimentally-calibrated model to reduce discrepancies between previous theoretical and experimental weathering rates. Our model estimates the upper bound of CDR potentials to be 0.22 (±0.16) Gt annually and 17 (±13) Gt cumulatively by 2100, thereby emphasizing the significance and urgency to advance ultra-enhanced weathering strategies.

A reusable, impurity-tolerant and noble metal-free catalyst for hydrocracking of waste polyolefins.

One-step conversion of low-purity polyolefins to value-added products without pretreatments represents a great opportunity for chemical recycling of waste plastics. However, additives, contaminants, and heteroatom-linking polymers tend to be incompatible with catalysts that break down polyolefins. Here, we disclose a reusable, noble metal-free and impurity-tolerant bifunctional catalyst, MoSx-Hbeta, for hydroconversion of polyolefins into branched liquid alkanes under mild conditions. The catalyst works for a wide scope of polyolefins, including different kinds of high-molecular weight polyolefins, polyolefins mixed with various heteroatom-linking polymers, contaminated polyolefins, and postconsumer polyolefins with/without cleaning under 250°C and 20 to 30 bar H2 in 6 to 12 hours. A 96% yield of small alkanes was successfully achieved even at a temperature as low as 180°C. These results demonstrate the great potentials of hydroconversion in practical use of waste plastics as a largely untapped carbon feedstock.

Chemically Recyclable CO2 -Based Solid Polyesters with Facile Property Tunability.

Synthesizing chemically recyclable solid polymeric materials is a significant strategy to potentially achieve carbon neutral production of new polymers and alleviate plastic pollution, especially when the synthesis is based on CO2 and inexpensive co-feedstocks available in large scales. Additionally, polymeric materials should have high enough molecular weight to exhibit distinguished properties from low molar mass polymers to serve for a broader range of application scenarios. However, up to now, strategies for developing solid-state CO2 -based chemically recyclable polyesters with both high molecular weight and facile property tunability are still unprecedented. Herein, a brand-new synthetic route is developed to synthesize chemically recyclable CO2 -based solid polyesters with high molecular weight (Mn up to 587.7 kg mol-1 ) and narrow dispersity (D < 1.2), which should further broaden the potential application scenarios of new CO2 -based polyesters. Additionally, complete monomer recovery from poly(δLH2 ) material is also achieved. The preserved terminal alkene groups allow facile property tuning of the polyesters via photo-initiated thiol-ene click reactions, enabling more potential utilities and further functionalizations.

Chemically recyclable polyesters from CO2, H2, and 1,3-butadiene.

Chemically recyclable solid polymeric materials with commercializable properties only using CO2 and inexpensive bulk chemicals as chemical feedstock can open a brand-new avenue to economically viable, large-scale fixation of CO2 over a long period of time. Despite previous great advancements, development of such a kind of CO2-based polymers remains a long-term unsolved research challenge of great significance. Herein, we reported the first methodology to polymerize six-membered lactone with two substituents vicinal to the ester group (HL), a compound previously found to be non-polymerizable. The present methodology enables the first synthesis of chemically recyclable solid polyesters (polyHL) with a high CO2 content (28 wt %) and large molecular weights (M n up to 613.8 kg mol-1). Transparent membranes with promising pressure-sensitive adhesive (PSA) properties comparable with their commercial counterparts can be conveniently fabricated from the polyesters. Mechanistic studies indicate that rigorous removal of water impurity is the key to the successful polymerization of the relatively inert disubstituted six-membered lactone. A complete monomer recovery from polyHL was also successfully achieved under mild catalytic conditions. The synthesis of polyHL only requires CO2 and two inexpensive bulk chemicals, H2 and 1,3-butadiene, as the starting materials, thus providing a new strategy for potential scalable chemical utilization of CO2 with desirable economic values and concomitant mitigation of CO2 emissions. This work should inspire future research to make useful new solid CO2-based polymers that can meaningfully increase the scale of chemical utilization of CO2 and promote the contribution of chemical utilization of CO2 to global mitigation of CO2 emissions.

Phenolate-bonded bis(µ-oxido)-bis-copper(III) intermediates: hydroxylation and dehalogenation reactivities.

Exogenous phenolate ortho-hydroxylation by copper oxidants formed from dioxygen is generally thought to occur through one of two limiting mechanisms defined by the structure of the active oxidant: an electrophilic µ-η2:η2-peroxo-bis-copper(II) species as found in the oxygenated form of the binuclear copper enzyme tyrosinase (oxyTyr), or an isomeric bis(µ-oxido)-bis-copper(III) species (O) with ligated phenolate(s) as evidenced by most synthetic systems. The characterization of the latter is limited due to their limited thermal stability. This study expands the scope of an O species with ligated phenolate(s) using N,N'-di-tert-butyl-1,3-propanediamine (DBPD), a flexible secondary diamine ligand. Oxygenation of the [(DBPD)Cu(I)]1+ complex at low temperatures (e.g., 153 K) forms a spectroscopically and structurally faithful model to oxyTyr, a side-on peroxide intermediate, which reacts with added phenolates to form a bis(µ-oxido)-bis-copper(III) species with ligated phenolates, designated as an A species. The proposed stoichiometry of A is best understood as possessing 2 rather than 1 bonded phenolate. Thermal decomposition of A results in regiospecific phenolate ortho-hydroxylation with the ortho-substituent as either a C-H or C-X (Cl, Br) group, though the halogen displacement is significantly slower. DFT and experimental studies support an electrophilic attack of an oxide ligand into the π-system of a ligated phenolate. This study supports a hydroxylation mechanism in which O-O bond cleavage of the initially formed peroxide by phenolate ligation, which precedes phenolate aromatic hydroxylation.

Low-Cost Polyethylene Terephthalate Fluidic Sensor for Ultrahigh Accuracy Measurement of Liquid Concentration Variation.

A low-cost polyethylene terephthalate fluidic sensor (PET-FS) is demonstrated for the concentration variation measurement on fluidic solutions. The PET-FS consisted of a triangular fluidic container attached with a birefringent PET thin layer. The PET-FS was injected with the test liquid solution that was placed in a common path polarization interferometer by utilizing a heterodyne scheme. The measured phase variation of probe light was used to obtain the information regarding the concentration change in the fluidic liquids. The sensor was experimentally tested using different concentrations of sodium chloride solution showing a sensitivity of 3.52 ×104 deg./refractive index unit (RIU) and a detection resolution of 6.25 × 10-6 RIU. The estimated sensitivity and detection resolutions were 5.62 × 104 (deg./RIU) and 6.94 × 10-6 RIU, respectively, for the hydrochloric acid. The relationship between the measured phase and the concentration is linear with an R-squared value reaching above 0.995.

A computational evaluation of targeted oxidation strategy (TOS) for potential inhibition of SARS-CoV-2 by disulfiram and analogues.

In the new millennium, the outbreak of new coronavirus has happened three times: SARS-CoV, MERS-CoV, and SARS-CoV-2. Unfortunately, we still have no pharmaceutical weapons against the diseases caused by these viruses. The pandemic of SARS-CoV-2 reminds us the urgency to search new drugs with totally different mechanism that may target the weaknesses specific to coronaviruses. Herein, we disclose a computational evaluation of targeted oxidation strategy (TOS) for potential inhibition of SARS-CoV-2 by disulfiram, a 70-year-old anti-alcoholism drug, and predict a multiple-target mechanism. A preliminary list of promising TOS drug candidates targeting the two thiol proteases of SARS-CoV-2 are proposed upon virtual screening of 32,143 disulfides.

Molecular Chirality Detection with Periodic Arrays of Three-Dimensional Twisted Metamaterials.

Rapid detection of the handiness of chiral molecules is an important topic for pharmaceutical industries because chiral drugs with opposing handiness sometimes exhibit unwanted side effects. In this research, a rapid optical method is proposed to determine the handiness of the chiral drug "Thalidomide". The platform is a large array of three-dimensional (3D) twisted metamaterials fabricated with a novel method by combining nanospherical-lens lithography (NLL) and hole-mask lithography (HML). The fabrication is high-throughput and the twisted metamaterials cover a large area. Strong circular dichroism (CD) response is observed in the near-infrared (NIR) region, which enables the chiral detection to be performed by a low-cost and portable spectroscope system. The proposed nanofabrication method significantly improves the capabilities of NLL and HML, which can be quickly adapted to fabricate various periodic 3D metamaterials. In addition, the results of this research pave the road for the rapid penetration of nanophotonics into the pharmaceutical industries.

Temperature-Resolved Cryo-EM Uncovers Structural Bases of Temperature-Dependent Enzyme Functions.

Protein functions are temperature-dependent, but protein structures are usually solved at a single (often low) temperature because of limitations on the conditions of crystal growth or protein vitrification. Here we demonstrate the feasibility of solving cryo-EM structures of proteins vitrified at high temperatures, solve 12 structures of an archaeal ketol-acid reductoisomerase (KARI) vitrified at 4-70 °C, and show that structures of both the Mg2+ form (KARI:2Mg2+) and its ternary complex (KARI:2Mg2+:NADH:inhibitor) are temperature-dependent in correlation with the temperature dependence of enzyme activity. Furthermore, structural analyses led to dissection of the induced-fit mechanism into ligand-induced and temperature-induced effects and to capture of temperature-resolved intermediates of the temperature-induced conformational change. The results also suggest that it is preferable to solve cryo-EM structures of protein complexes at functional temperatures. These studies should greatly expand the landscapes of protein structure-function relationships and enhance the mechanistic analysis of enzymatic functions.

Air-Tolerant Direct Thiol Esterification with Carboxylic Acids Using Hydrosilane via Simple Inorganic Base Catalysis.

Direct thioesterification of carboxylic acids with thiols using nontoxic activation agents is highly desirable. Herein, an efficient and practical protocol using safe and inexpensive industrial waste polymethylhydrosiloxane as the activation agent and K3PO4 with 18-crown-6 as a catalyst is described. Various functional groups on carboxylic acid and thiol substituents can be tolerated by the present system to afford thioesters in yields of 19-100%.

Use of Cryo-EM To Uncover Structural Bases of pH Effect and Cofactor Bispecificity of Ketol-Acid Reductoisomerase.

While cryo-EM is revolutionizing structural biology, its impact on enzymology is yet to be fully demonstrated. The ketol-acid reductoisomerase (KARI) catalyzes conversion of (2 S)-acetolactate or (2 S)-aceto-2-hydroxybutyrate to 2,3-dihydroxy-3-alkylbutyrate. We found that KARI from archaea Sulfolobus solfataricus (Sso-KARI) is unusual in being a dodecamer, bispecific to NADH and NADPH, and losing activity above pH 7.8. While crystals were obtainable only at pH 8.5, cryo-EM structures were solved at pH 7.5 and 8.5 for Sso-KARI:2Mg2+. The results showed that the distances of the two catalytic Mg2+ ions are lengthened in both structures at pH 8.5. We next solved cryo-EM structures of two Sso-KARI complexes, with NADH+inhibitor and NADPH+inhibitor at pH 7.5, which indicate that the bispecificity can be attributed to a unique asparagine at the cofactor binding loop. Unexpectedly, Sso-KARI also differs from other KARI enzymes in lacking "induced-fit", reflecting structural rigidity. Thus, cryo-EM is powerful for structural and mechanistic enzymology.

Universal Anticancer Cu(DTC)2 Discriminates between Thiols and Zinc(II) Thiolates Oxidatively.

Aerobic organisms must rely on abundant intracellular thiols to reductively protect various vital functional units, especially ubiquitous zinc(II) thiolate sites of proteins, from deleterious oxidations resulting from oxidizing environments. Disclosed here is the first well-defined model study for reactions between zinc(II) thiolate complexes and copper(II) complexes. Among all the studied ligands of copper(II), diethyldithiocarbamate (DTC) displays a unique redox-tuning ability that enables copper(II) to resist the reduction by thiols while retaining its ability to oxidize zinc(II) thiolates to form disulfides. This work proves for the first time that it is possible to develop oxidants to discriminate between thiols and zinc(II) thiolates, alluding to a new chemical principle for how oxidants, especially universal anticancer Cu(DTC)2 , might circumvent the intracellular reductive defense around certain zinc(II) thiolate sites of proteins to kill malignant cells.

Scalable direct N-methylation of drug-like amines using 12CO2/13CO2 by simple inorganic base catalysis.

With the growing urgency of potential catastrophic climate changes due to anthropogenic CO2 emissions, numerous efforts have been devoted to development of synthetic protocols using CO2 as a building block in organic reactions, but the general applicability to complex drug-like substrates remains a challenge. We develop a general protocol for scalable direct N-methylation of a wide-scope drug-like amines using CO2 and polymethylhydrosiloxane-a nontoxic, aerobically-stable hydrosilane considered as an industrial waste-via simple inorganic base catalysis. A rare application of the Sabatier principle in organic chemistry led to the discovery of cheap, nontoxic K3PO4 as an efficient catalyst. Preparations of a wide-scope drug-like amines with carbon-isotope label were also successfully achieved, enabling direct use of CO2 in studies of drug absorption, distribution, metabolism and excretion.

Polarization-Selecting III-Nitride Elliptical Nanorod Light-Emitting Diodes Fabricated with Nanospherical-Lens Lithography.

Current-injected elliptical nanorod light-emitting diodes (LEDs) are demonstrated to emit polarized light with a bottom-emitting configuration. The polarization ratio of the electroluminescence reaches 3.17 when the length of the minor axis for the elliptical nanorods is as small as 150 nm. Electromagnetic simulation confirms the occurrence of the polarization selectivity especially when the length of the minor axis is down to 150 nm. Light with different polarization travels at different speeds in these asymmetric elliptical nanorods. Only one polarization experiences destructive interference between the light directly from the source and the reflected light by the top metal interface. A thin light-blocking layer is incorporated to increase the polarization selectivity. It is also not recommended to infill the gap with SiO2 since the polarization selectivity will be reduced. The proposed nanorod LEDs are fabricated using top-down nanofabrication approaches by combining nanospherical-lens lithography and two-step etch processes, which are both fully compatible with current semiconductor manufacturing processes. Results in this study will help to develop a chip-level polarization-selecting LED, which will be very useful for applications that require polarized light. It is especially beneficial for applications that are not suitable for using an external polarizer or require polarized light at the individual chip level.

NADH/NADPH bi-cofactor-utilizing and thermoactive ketol-acid reductoisomerase from Sulfolobus acidocaldarius.

Ketol-acid reductoisomerase (KARI) is a bifunctional enzyme in the second step of branched-chain amino acids biosynthetic pathway. Most KARIs prefer NADPH as a cofactor. However, KARI with a preference for NADH is desirable in industrial applications including anaerobic fermentation for the production of branched-chain amino acids or biofuels. Here, we characterize a thermoacidophilic archaeal Sac-KARI from Sulfolobus acidocaldarius and present its crystal structure at a 1.75-Å resolution. By comparison with other holo-KARI structures, one sulphate ion is observed in each binding site for the 2'-phosphate of NADPH, implicating its NADPH preference. Sac-KARI has very high affinity for NADPH and NADH, with K M values of 0.4 µM for NADPH and 6.0 µM for NADH, suggesting that both are good cofactors at low concentrations although NADPH is favoured over NADH. Furthermore, Sac-KARI can catalyze 2(S)-acetolactate (2S-AL) with either cofactor from 25 to 60 °C, but the enzyme has higher activity by using NADPH. In addition, the catalytic activity of Sac-KARI increases significantly with elevated temperatures and reaches an optimum at 60 °C. Bi-cofactor utilization and the thermoactivity of Sac-KARI make it a potential candidate for use in metabolic engineering or industrial applications under anaerobic or harsh conditions.

The Arginine Pairs and C-Termini of the Sso7c4 from Sulfolobus solfataricus Participate in Binding and Bending DNA.

The Sso7c4 from Sulfolobus solfataricus forms a dimer, which is believed to function as a chromosomal protein involved in genomic DNA compaction and gene regulation. Here, we present the crystal structure of wild-type Sso7c4 at a high resolution of 1.63 Å, showing that the two basic C-termini are disordered. Based on the fluorescence polarization (FP) binding assay, two arginine pairs, R11/R22' and R11'/R22, on the top surface participate in binding DNA. As shown in electron microscopy (EM) images, wild-type Sso7c4 compacts DNA through bridging and bending interactions, whereas the binding of C-terminally truncated proteins rigidifies and opens DNA molecules, and no compaction of the DNA occurs. Moreover, the FP, EM and fluorescence resonance energy transfer (FRET) data indicated that the two basic and flexible C-terminal arms of the Sso7c4 dimer play a crucial role in binding and bending DNA. Sso7c4 has been classified as a repressor-like protein because of its similarity to Escherichia coli Ecrep 6.8 and Ecrep 7.3 as well as Agrobacterium tumefaciens ACCR in amino acid sequence. Based on these data, we proposed a model of the Sso7c4-DNA complex using a curved DNA molecule in the catabolite activator protein-DNA complex. The DNA end-to-end distance measured with FRET upon wild-type Sso7c4 binding is almost equal to the distance measured in the model, which supports the fidelity of the proposed model. The FRET data also confirm the EM observation showing that the binding of wild-type Sso7c4 reduces the DNA length while the C-terminal truncation does not. A functional role for Sso7c4 in the organization of chromosomal DNA and/or the regulation of gene expression through bridging and bending interactions is suggested.

Highly Efficient Synthesis of Functionalizable Polymers from a CO2/1,3-Butadiene-Derived Lactone.

Making polymers from CO2 and olefins has been long sought and is of particular significance for chemical utilizations of CO2. Herein, high molecular-weight polymers with 29 wt % CO2 were obtained by polymerizing a δ-lactone (L) synthesized from a C-C coupling reaction between CO2 and 1,3-butadiene, an economical large-volume chemical that can also be derived from top biomass platform chemicals. Although L has been known for many years, little was investigated in its polymerization. We found that L's polymerizability can be vitalized upon simply heating in the presence of O2. The polymerization is additive/solvent-free with abundant preserved olefins and up to full monomer conversion, providing a convenient, economical, and scalable avenue to obtain CO2-derived polymers with potentially tailorable properties via the readily modifiable olefins.