Adverse childhood experiences in children and adolescents with sickle cell disease: A retrospective cohort study.

BACKGROUND: Adverse childhood experiences (ACEs) are linked to poor health outcomes; however, the relationship between ACEs and health outcomes among children and adolescents with sickle cell disease (SCD) has limited documentation in the published literature. PROCEDURE: This retrospective cohort study involved 45 children and 30 adolescents. Participants were screened using the Center for Youth Wellness ACE Questionnaire. Parents completed the questionnaire for children. Adolescents provided self-report. ACEs were treated as continuous and categorical scales: 0-1 verus ≥2 original ACEs (individual and/or familial level); 0-1 versus ≥2 additional ACEs (community level); and 0-3 versus ≥4 expanded ACEs (original + additional). Pain and acute chest syndrome events were compared using Wilcoxon rank-sum tests, and correlated with cumulative ACE scores using Spearman's correlation. Multivariable models were fitted to examine the association between ACEs and pain/acute chest syndrome. RESULTS: The cumulative number of original ACEs positively correlated with acute chest syndrome events (rho = .53, p = .003) and pain (rho = .40, p = .028) among adolescents. Adolescents with ≥2 versus 0-1 original ACEs had a higher number of acute chest syndrome events (4.9 ± 2.6 vs. 1.6 ± 2.2, p = .002); however, this association was confounded by asthma. Acute chest syndrome events and hospitalizations for pain did not differ among child ACE groups. Emergency department (ED) pain visits were higher among children with ≥4 versus 0-3 expanded ACEs (1.6 ± 2.8 vs. 3.3 ± 3.2, p = .042), even after controlling for SCD genotype, asthma, disease-modifying treatment, and follow-up years (p = .027). CONCLUSION: ACEs are linked to increased morbidity among children and adolescents with SCD. Prospective studies are needed to further understand this relationship and test ACE-protective remedies.

A 5-Year Retrospective Analysis of Biologic and Prosthetic Complications Associated With Single-Tooth Endosseous Dental Implants: Practical Applications.

FOCUSED CLINICAL QUESTION: What are the key considerations of the incidence and timing for single-tooth implant complications, including early failure, biological complications, and prosthetic complications? SUMMARY: Single-tooth dental implants have been shown to have a high overall survival rate, but implant complications affect patient satisfaction and may lead to costly and/or time-consuming repair and revision. Assessing the incidence and types of biologic and prosthetic complications and the timing of such complications is helpful so that the underlying causes can be addressed during the treatment planning process. Furthermore, identification of patient demographics, patient-, implant-, and site-specific factors associated with such complications may allow for more comprehensive risk assessment during treatment planning. CONCLUSIONS: Overall, dental implants have a high survival rate. Identification of the incidence of both biologic and prosthetic complications and minimizing their impact in patients with dental implants is critical to overall implant success. Utilization of careful treatment planning and dental implant fixtures, surgical protocols, and prosthetic designs that reduce complication rates can improve patient acceptance and outcomes. Further research is necessary to fully assess complication rates and risk factors.

Timing and Success of Postoperative Voiding Trial After Colpocleisis With and Without Concomitant Midurethral Sling.

OBJECTIVE: The aim of this study was to compare failure rates of first voiding trial (VT) within 7 days and on postoperative day (POD) 1 after colpocleisis with versus without concomitant midurethral sling (MUS). Predictors of POD 1 VT failure were also examined. METHODS: This was a retrospective cohort study of women undergoing colpocleisis from January 2012 to October 2019 comparing VT outcomes with versus without MUS. Primary outcome was first VT failure within 7 days; outcomes of VTs performed on POD 1 were also assessed. Association between MUS and VT failure and predictors of POD 1 VT failure were assessed via logistic regression. RESULTS: Of 119 women, 45.4% had concomitant MUS. First VT was performed on mean POD 3.1 ± 2.2 in the MUS group versus POD 1.8 ± 1.8 in the no MUS group (P < 0.01). The MUS group was less likely to undergo POD 1 VT (50% vs 83%, P < 0.01). Failure of the first VT did not differ (22.2% with MUS vs 32.8% without MUS, P = 0.20); no association between VT failure and MUS was noted (adjusted odds ratio [aOR], 0.6; 95% confidence interval [CI], 0.18-2.1). There were 68.1% (81/119) of participants who underwent POD 1 VT, MUS was performed in 33.3% (27/81). The POD 1 failure did not differ between those with 33.3% versus 40.7% without MUS (P = 0.52). Midurethral sling was not associated with POD 1 VT failure (aOR, 0.93; 95% CI, 0.27-3.23). In women undergoing POD 1 VT, preoperative postvoid residual was associated with VT failure (aOR, 1.39; 95% CI, 1.01-1.92). CONCLUSIONS: In women undergoing colpocleisis, MUS was not associated with VT failure within 7 days or on POD 1. Increased preoperative postvoid residual was associated with POD 1 VT failure.

Non-toxic fragment of botulinum neurotoxin type A and monomethyl auristatin E conjugate for targeted therapy for neuroendocrine tumors.

Surgical resection is the only cure for neuroendocrine tumors (NETs). However, widespread metastases have already occured by the time of initial diagnosis in many cases making complete surgical removal impossible. We developed a recombinant heavy-chain receptor binding domain (rHCR) of botulinum neurotoxin type A that can specifically target synaptic vesicle 2 (SV2), a surface receptor abundantly expressed in multiple neuroendocrine tumors. Expression of neuroendocrine differentiation markers chromogranin A (CgA) and achaete-scute complex 1 (ASCL1) were signficantly reduced when treated with rHCR. rHCR conjugated to the antimitotic agent monomethyl auristatin E (MMAE) significantly suppressed proliferation of pancreatic carcinoid (BON) and medullary thyroid cancer cells (MZ) at concentrations of 500 and 300 nM respectively, while no growth suppression was observed in pulmonary fibroblasts and cortical neuron control cell lines. In vivo, rHCR-MMAE significantly reduced tumor volume in mouse xenografts with no observed adverse effects. These data suggest recombinant HCR (rHCR) of BoNT/A preferentially targets neuroendocrine cancer without the neurotoxicity of the full BoNT/A and that SV2 is a specific and promising target for delivering drugs to neuroendocrine tumors.

Assessing patients' preferences for gender, age, and experience of their urogynecologic provider.

INTRODUCTION AND HYPOTHESIS: Understanding patient preferences regarding provider characteristics is an under-explored area in urogynecology. This study aims to describe patient preferences for urogynecologic care, including provider gender, age, experience, and presence of medical trainees. METHODS: This was a multicenter, cross-sectional, survey-based study assessing patient preferences with a voluntary, self-administered, anonymous questionnaire prior to their first urogynecology consult. A 5-point Likert scale addressing provider gender, age, experience, and presence of trainees was used. Descriptive statistics summarized patient characteristics and provider preferences. Chi-squared (or Fisher's exact) test was used to test for associations. RESULTS: Six hundred fifteen women participated from eight sites including all geographic regions across the US; 70.8% identified as white with mean age of 58.5 ± 14.2 years. Urinary incontinence was the most commonly reported symptom (45.9%); 51.4% saw a female provider. The majority of patients saw a provider 45-60 years old (42.8%) with > 15 years' experience (60.9%). Sixty-five percent of patients preferred a female provider; 10% preferred a male provider. Sixteen percent preferred a provider < 45 years old, 36% preferred 45-60 years old, and 11% of patients preferred a provider > 60 years old. Most patients preferred a provider with 5-15 or > 15 years' experience (49% and 46%, respectively). Eleven percent preferred the presence of trainees while 24% preferred trainee absence. CONCLUSION: Patient preferences regarding urogynecologic providers included female gender and provider age 45-60 years old with > 5 years' experience. Further study is needed to identify qualitative components associated with these preferences.

Effect of Surface Treatment and Cement on Fracture Load of Traditional Zirconia (3Y), Translucent Zirconia (5Y), and Lithium Disilicate Crowns.

PURPOSE: To determine if surface treatment and cement selection for traditional 3 mol% yttria partially stabilized zirconia (3Y-PSZ), "translucent" 5 mol% yttria-stabilized zirconia (5Y-Z), or lithium disilicate crowns affected their fracture load. MATERIALS AND METHODS: Crowns with 0.8 mm uniform thickness (96, n = 8/group) were milled of 3Y-PSZ (Lava Plus), 5Y-Z (Lava Esthetic), or lithium disilicate (e.max CAD) and sintered/crystallized. Half the crowns were either particle-abraded with 30 µm alumina (zirconias) or etched with 5% hydrofluoric acid (lithium disilicate), and the other half received no surface treatment. Half the crowns from each group were luted with resin-modified glass ionomer (RMGI, RelyX Luting Plus) and half were luted with a resin cement (RelyX Unicem 2) to resin composite dies. Crowns were load cycled (100,000 cycles, 100 N force, 24°C water) and then loaded with a steel indenter until failure. A three-way ANOVA examined the effects of material, cement, and surface treatment on fracture load. Post-hoc comparisons were performed with the Tukey-Krammer method. RESULTS: Fracture load was signficiantly different for materials and cements (p < 0.0001) but not surface treatments (p = 0.77). All lithium disilicate crowns luted with RMGI failed in fatigue loading cycling; 3Y-PSZ and 5Y-Z crowns luted with resin showed a higher fracture load compared with RMGI (p < 0.001). With resin cement, there was no signficant difference in fracture load between 5Y-Z and lithium disiliciate (p = 1) whereas 3Y-PSZ had a higher fracture load (p < 0.0001). CONCLUSIONS: Cement type affected fracture load of crowns but surface treatment did not. The 0.8 mm uniform thick crowns tested benefited from using resin cement regardless of type of ceramic material. Crowns fabricated from 5Y-Z may be particle-abraded if luted with resin cement.

Duration of therapeutic coma and outcome of refractory status epilepticus.

OBJECTIVE: Examine the association of duration of therapeutic coma (TC) with seizure recurrence, morbidity, and mortality in refractory status epilepticus (RSE). Define an optimal window for TC that provides sustained seizure control and minimizes complications. METHODS: Retrospective, observational cohort study involving patients who presented with RSE to the University of Alabama at Birmingham or the University of California at San Francisco from 2010 to 2016. Relationship of duration of TC with primary and secondary outcomes was evaluated using two-sample t tests, simple linear regression, and chi-square tests. Multivariable linear and logistic regression models were used to identify independent predictors. Predictive ability of TC for seizure recurrence was quantified using a receiver-operating characteristic curve. Youden index was used to determine an optimal cutoff value. RESULTS: Multivariable analysis of clinical and treatment characteristics of 182 patients who were treated predominantly with propofol as anesthetic agent showed that longer duration of the first trial of TC (27.2 vs 15.6 hours) was independently associated with a higher chance of seizure recurrence following the first weaning attempt (P = 0.038) but not with poor functional neurologic outcome upon discharge, in-hospital complications, or mortality. Furthermore, higher doses of anesthetic utilized during the first trial of TC were independently associated with fewer in-hospital complications (P = 0.003) and associated with a shorter duration of mechanical ventilation and total length of stay. Duration of TC was identified as an independent predictor of seizure recurrence with an optimal cutoff point at 35 hours. SIGNIFICANCE: This study suggests that a shorter duration yet deeper TC as treatment for RSE may be more effective and safer than the currently recommended TC duration of 24-48 hours. Prospective and randomized trials should be conducted to validate these assertions.

Optimal antero-posterior position of the maxillary central incisors and its relationship to the forehead in adult African American females.

OBJECTIVES: To determine an optimal anteroposterior (AP) position of the maxillary central incisors and their relationship to the forehead in adult African American (AA) females. MATERIALS AND METHODS: Smile profile photographs of 150 AA females were acquired and divided into an optimal control group (N = 48) and a study group (N = 102) based on the position of the maxillary central incisors, as judged by a panel of orthodontists and orthodontic residents. The AP position of the maxillary central incisors and the forehead inclination (FI) were measured relative to Glabella vertical (GV). A two-sample t-test was used to compare the incisor AP position and the FI between the two groups. Linear regression was used to quantify the relationship between the incisor AP position and the FI. RESULTS: In all groups, the maxillary incisors were anterior to GV. However, a significant difference was found in the incisor AP position between the groups (8.58 ± 3.96 mm for the control group and 11.2 ± 4.48 mm for the study group; P = .001). Furthermore, the control group demonstrated a positive association between the optimal AP position of the maxillary central incisors and FI ( P < .0001). CONCLUSIONS: GV is a reliable landmark with which to access the AP maxillary incisor position in AA females. The optimal AP position of the maxillary central incisors is significantly associated with FI; the greater the FI, the more anterior the optimal maxillary incisor position. A prediction equation to determine the optimal position of the maxillary incisors relative to GV for AA females is proposed.

Acute Hemodynamic Effects of Biventricular Pacing After Left Ventricular Assist Device.

BACKGROUND: Despite cardiac resynchronization therapy (CRT), some patients with heart failure progress and undergo left ventricular assist device (LVAD) implantation. Management of CRT after LVAD implantation has not been well studied. The purpose of this study was to determine whether RV pacing or biventricular pacing measurably affects acute hemodynamics in patients with an LVAD and a CRT device. METHODS AND RESULTS: Seven patients with CRT and LVAD underwent right heart catheterization. Pressures and oximetry were measured and LVAD parameters were recorded during 3 different conditions: RV pacing alone, biventricular pacing, and intrinsic atrioventricular conduction. Paired t tests were used to evaluate changes within subjects. There were no significant changes in right atrial pressure, pulmonary arterial pressures, pulmonary capillary wedge pressure, cardiac index, or any LVAD parameter (P > .05). CONCLUSIONS: Our data suggest that CRT probably has no acute hemodynamic effect in patients with LVADs, but further study is needed.

Utility of the Surgical Apgar Score in Head and Neck Squamous Cell Carcinoma.

Objectives To recognize the utility of the surgical Apgar score (SAS) in a noncutaneous head and neck squamous cell carcinoma (HNSCC) population. Study Design Retrospective case series with chart review. Setting Academic tertiary medical center. Subjects and Methods Patients (n = 563) undergoing noncutaneous HNSCC resection between April 2012 and March 2015 were included. Demographics, medical history, intraoperative data, and postoperative hospital summaries were collected. SASs were calculated following the published schema. The primary outcome was 30-day postoperative morbidity. A 2-sample t test, analysis of variance, and χ2 (or Fisher exact) test were used for statistical comparisons. A multivariable logistic regression analysis was conducted to identify independent predictors of 30-day morbidity. Results Mean SAS was 6.2 ± 1.5. SAS groups did not differ in age, sex, or race. Sixty-five patients (11.6%) had a SAS between 0 and 4, with 40 incidences of morbidity (61.5%), while 31 (5.5%) patients with SAS from 9 to 10 had 3 morbidity occurrences (9.7%). Results show that 30-day postoperative morbidity is inversely related to increasing SAS ( P < .0001). Furthermore, lower SAS was associated with significantly increased operative time (SAS 0-4: 9.3 ± 2.6 hours vs SAS 9-10: 3.0 ± 1.1 hours) and lengths of stay (SAS 0-4: 10.0 ± 7.3 days vs SAS 9-10: 1.6 ± 1.0 days), P < .0001. SAS remained highly significant after adjusting for potential confounding variables in the multivariable analysis ( P < .0001). Conclusions An increasing SAS is associated with significantly lower rates of 30-day postoperative morbidities in a noncutaneous HNSCC patient population.

Retention of CAD/CAM resin composite crowns following different bonding protocols.

PURPOSE: To evaluate the effect of different surface treatments and primers with a CAD/CAM resin composite block on its crown retention. METHODS: 120 human molars were prepared with a 24° total convergence angle, 1.5 mm height, and axial walls in dentin. Surface area was measured by digital microscopy. Crowns were machined from CAD/CAM resin composite blocks. Teeth were randomly allocated to 12 groups (n= 10) based on possible combinations of three surface treatments: [Control, Alumina air abrasion (50-µm Al2O3 at 0.28 MPa) ]; 5% hydrofluoric acid etch (20-second scrub); silane application (with or without Kerr Silane primer); and adhesive application (with or without Optibond XTR Adhesive). Optibond XTR Adhesive was applied to the tooth preparations and crowns were bonded with MaxCem Elite cement. Crowns were fatigued for 100,000 cycles at 100 N in water and debonded in tension (1 mm/minute). Crown retention strength (maximum load/surface area) values were analyzed using a three-way ANOVA with Tukey's post-hoc tests (α= 0.05). RESULTS: Surface treatment, silane and adhesive applications independently affect retention force (P< 0.05). All interactions were not significant (P> 0.05). Alumina airborne abrasion surface treatment, silane and adhesive applications all improve retention strength. Therefore, CAD/CAM resin composite crowns can withstand debonding while undergoing mechanical fatigue. Although all forms of surface treatment and primer application improve bond strength, the highest mean retention strength values were recorded when the crowns were alumina particle abraded and coated with adhesive (with or without silane). CLINICAL SIGNIFICANCE: In order to improve the bonding of resin composite crowns, application of alumina airborne particle abrasion and a coat of adhesive (proceeded by an optional coat of silane) is recommended. If hydrofluoric acid is utilized, the crowns should be treated with a coat of silane followed by adhesive application.

Utility of the Modified Surgical Apgar Score in a Head and Neck Cancer Population.

Objective The Surgical Apgar Score (SAS) is a validated postoperative complication prediction model. The purpose of this study was to investigate the utility of the SAS in a diverse head and neck cancer population and to compare it with a recently developed modified SAS (mSAS) that accounts for intraoperative transfusion. Study Design Case series with chart review. Setting Academic tertiary care medical center. Subjects and Methods This study comprised 713 patients undergoing surgery for head and neck cancer from April 2012 to March 2015. SAS values were calculated according to intraoperative data obtained from anesthesia records. The mSAS was computed by assigning an estimated blood loss score of zero for patients receiving intraoperative transfusions. Primary outcome was 30-day postoperative morbidity. Results Mean SAS and mSAS were 6.3 ± 1.5 and 6.2 ± 1.7, respectively. SAS and mSAS were significantly associated with 30-day postoperative morbidity, length of stay, operative time, American Society of Anesthesiologists status, race, and body mass index ( P < .05); however, no significant association was detected for age, sex, and smoking status. Multivariable analysis identified SAS and mSAS as independent predictors of postoperative morbidity, with the mSAS ( P = .03) being a more robust predictor than the SAS ( P = .15). Strong inverse relationships were demonstrated for the SAS and mSAS with length of stay and operative time ( P < .0001). Conclusion The SAS serves as a useful metric for risk stratification of patients with head and neck cancer. With the inclusion of intraoperative transfusion, the mSAS demonstrates superior utility in predicting those at risk for postoperative complications.

Respiratory oxygen uptake is associated with survival in a cohort of ventilated trauma and burn patients.

BACKGROUND: Little data is available in the literature about the role of end tidal oxygen in critically ill patients. We sought to identify the association between the level of respiratory oxygen and clinical outcomes in critically-ill ventilated trauma and burn patients. METHODS: A retrospective cohort of 55 trauma and burn patients from 2010 to 2016 was collected. Exposures of interest included a) expiratory end tidal oxygen (ETO2) and b) the difference between FiO2 and ETO2 (uptake). Associations of clinical characteristics with ETO2 and oxygen uptake were examined using a Spearman correlation. The relationships between discharge status, demographics, injury type, severity, and clinical characteristics were examined using chi-square (or Fisher's exact) tests and two-sample t-tests. Multivariable analyses using linear and logistic regression were performed to determine whether expiratory end tidal oxygen or oxygen uptake was an independent predictor of clinical outcomes. RESULTS: Mean age for the patients was 46.3±18.2years with 41 (74.6%) male and 34 (61.8%) white. In the cohort, 27 (49.1%) of patients had burns and 28 (50.9%) blunt trauma. Oxygen uptake was negatively correlated with lactic acid, minute ventilation, total ICU days, and ventilator days (p<0.05). Patients who died demonstrated lower oxygen uptake than those alive, oxygen uptake remained significantly associated with discharge status after adjusting for potential confounders (p=0.028). CONCLUSION: A narrowed difference between ETO2 and inspiratory oxygen is associated with increased mortality in a cohort of ventilated trauma and burn patients. Future research is needed to further elucidate the role of respiratory oxygen level in larger, prospective studies.

Retentive Force of Zirconia Implant Crowns on Titanium Bases Following Different Surface Treatments.

PURPOSE: Screw-retained zirconia implant crowns with an internal titanium base have favorable mechanical properties compared with single-piece zirconia implant crowns; however, the screw-retained implant crowns require adequate bonding between the zirconia crown and the titanium base. This study measured the retention between a titanium base and a full-contour zirconia implant crown following different surface treatments of their bonded surfaces. MATERIALS AND METHODS: Full-contour screw-retained zirconia implant crowns were fabricated to fit a titanium base. The crowns were bonded to the titanium bases following one of four treatment protocols (n = 15 per protocol group): no surface treatment (Control), 10-methacryloyloxydecyl dihydrogen phosphate (MDP) primer on the intaglio of crown and exterior of base (MDP), alumina airborne-particle abrasion of the intaglio of crown and exterior of base (Alu), and alumina airborne-particle abrasion and an MDP primer on the intaglio of crown and exterior of base (Alu+MDP). All crowns were bonded to the base with resin cement. Specimens were stored in water for 24 hours at 37°C and then thermocycled in water, with a temperature range of 5°C to 55°C, for 15,000 cycles with a 15-second dwell time. Crowns were separated from the titanium bases using a universal testing machine. The four treatment protocols were compared using one-way analysis of variance (ANOVA), followed by Tukey post hoc tests (P < .05). Sectioned specimens were examined with scanning electron microscopy (SEM). RESULTS: Retention forces for Control (737.8 ± 148.9 N) and MDP (804.1 ± 114.5 N) were significantly greater than Alu+MDP (595.5 ± 122.2 N), which was significantly greater than Alu (428.2 ± 93.8 N). Visual inspection of the debonded specimens showed that the majority of the cement remnants were seen on the external surface of the titanium bases. Microscopic examination of the interface between the crown and the unaltered base shows that the cement gap is approximately 13 µm at the crest of the microgrooves and 50 µm within the channel of the microgrooves. After airborne-particle abrasion, the microgrooves became significantly dulled, and the cement gap increased to 27 to 40 µm at the crest and 55 to 58 µm in the channels. CONCLUSION: Airborne-particle abrasion of titanium bases that contain retentive microgrooves prior to bonding is contraindicated. Application of an MDP primer demonstrated limited improvement in the retention of the zirconia implant crowns.

Microleakage around zirconia crown margins after ultrasonic scaling with self-adhesive resin or resin modified glass ionomer cement.

OBJECTIVES: To measure microleakage around zirconia crown margins cemented with self-adhesive resin or resin modified glass ionomer (RMGI) cement after ultrasonic scaling. METHODS: 16 molars were prepared for crowns (margin 0.5 mm coronal of cementum-enamel junction). Preparations were digitally scanned and zirconia crowns milled. Specimens were divided into two groups (n = 8): self-adhesive resin (RelyX Unicem 2) or resin modified glass ionomer (RMGI) (RelyX Luting Plus) cements. After cementation, specimens were ultrasonic scaled with a piezoelectric device (60 s, hand pressure). After thermocycling (20,000 cycles/5-55°C), specimens were immersed in 5 wt% fuchsine dye before sectioning bucco-lingually. Microleakage was examined under 40× light magnification. Statistical comparisons were made using a paired t test and a two-sample t test (α = .05). RESULTS: Ultrasonic scaling did not alter microleakage at the margins of crowns (P = .31). There was no significant difference in microleakage of scaled and untreated margins with the use of different cements (P = .21). The amount of microleakage around margins that were scaled was not significantly different between cements (P = .14). Untreated margins of crowns cemented with RelyX Luting Plus showed a significantly higher microleakage than those cemented with RelyX Unicem 2 (P = .005). CONCLUSIONS: Piezoelectric ultrasonic scaling did not increase microleakage at the margin of zirconia crowns cemented with self-adhesive resin or RMGI cements. CLINICAL SIGNIFICANCE: Piezoelectric ultrasonic scaling around zirconia crowns did not impact marginal microleakage cemented with self-adhesive resin or RMGI cements.

Increased pancreatic cancer survival with greater lymph node retrieval in the National Cancer Data Base.

BACKGROUND: We evaluated the role of lymph node (LN) retrieval in pancreatic adenocarcinoma (PA) patients undergoing pancreaticoduodenectomy (PD). METHODS: We utilized the National Cancer Data Base; Cox regression models and logistic regression models were used for statistical evaluation. RESULTS: We evaluated 26,792 patients with PA who underwent PD. The mean LN retrieved in LN(-) patients was 10.8 vs 14.4 for LN(+) patients (P < 0.0001). Greater LN retrieval is an independent predictor of a negative microscopic margin and decreased length of stay. The median survival of LN(-) patients exceeded that of LN(+) patients (24.5 vs 15.1 months, P < 0.0001). Increasing LN retrieval is a significant predictor of survival in all patients, and in LN(-) patients. The relationship of increased LN retrieval and enhanced survival is a nearly linear trend. CONCLUSIONS: Rather than demonstrating an inflection point that defines the extent of adequate lymphadenectomy, this dataset demonstrates an incremental relationship between LN retrieval and survival.

Distinctive Risk Factors and Phenotype of Younger Patients With Resistant Hypertension: Age Is Relevant.

Resistant hypertension, defined as blood pressure >140/90 mm Hg despite using ≥3 antihypertensive medications, is a well-recognized clinical entity. Patients with resistant hypertension are at an increased risk of cardiovascular disease compared with those with more easily controlled hypertension. Coronary heart disease mortality rates of younger adults are stagnating or on the rise. The purpose of our study was to characterize the phenotype and risk factors of younger patients with resistant hypertension, given the dearth of data on cardiovascular risk profile in this cohort. We conducted a cross-sectional analysis with predefined age groups of a large, ethnically diverse cohort of 2170 patients referred to the Hypertension Clinic at the University of Alabama at Birmingham. Patients (n=2068) met the inclusion criteria and were classified by age groups, that is, ≤40 years (12.7% of total cohort), 41 to 55 years (32.1%), 56 to 70 years (36.1%), and ≥71 years (19.1%). Patients aged ≤40 years compared with those aged ≥71 years had significantly earlier onset of hypertension (24.7±7.4 versus 55.0±14.1 years; P<0.0001), higher rates of obesity (53.4% versus 26.9%; P<0.0001), and significantly higher levels of plasma aldosterone (11.3±9.8 versus 8.9±7.4 ng/dL; P=0.005), plasma renin activity (4.9±10.2 versus 2.5±5.0 ng/mL per hour; P=0.001), 24-hour urinary aldosterone (13.4±10.0 versus 8.2±6.2 µg/24 h; P<0.0001), and sodium excretion (195.9±92.0 versus 146.8±67.1 mEq/24 h; P<0.0001). Among patients with resistant hypertension, younger individuals have a distinct phenotype characterized by overlapping risk factors and comorbidities, including obesity, high aldosterone, and high dietary sodium intake compared with elderly.

11-Beta Dehydrogenase Type 2 Activity Is Not Reduced in Treatment Resistant Hypertension.

BACKGROUND AND OBJECTIVE: Decreased renal 11-beta dehydrogenase type 2 (11ß-HSD2) activity, as reflected by an increased urinary free cortisol to cortisone ratio (UFF/UFE), is associated with having hypertension (HTN). The current study was conducted to determine if reduced 11ß-HSD2 activity is also associated with having resistant HTN. METHOD: We evaluated 55 consecutive patients with RHTN, defined as blood pressure (BP) ≥140/90 mm Hg despite using ≥3 antihypertensive medications including a diuretic, and 38 patients whose BP was controlled on ≤3 medications to serve as a non-RHTN comparator group. All patients underwent biochemical evaluation, including measurement of 24-hour urinary UFF/UFE. RESULTS: The 2 study groups had similar demographic characteristics. Systolic, diastolic BP, and number of antihypertensive medications were greater in patients with uncontrolled RHTN vs. the control group (167.5 ± 28.2/91.2 ± 18.8 vs. 126.6 ± 11.4/77.8 ± 8.65 mm Hg and 4.31 ± 1.23 vs. 2.74 ± 0.6, respectively). The 24-hour UFF was 13.6 ± 11.8 vs. 14.3 ± 10.7 µg/24 h and UFE was 64.9 ± 36.3 vs. 76.1 ± 44 µg/24 h such that the UFF/UFE was 0.22 ± 0.16 vs. 0.19 ± 0.09 in RHTN vs. the control group. This ratio was not associated to age, race, gender, and body mass index. CONCLUSION: An elevated UFF/UFE was not present in this large cohort of patients with uncontrolled RHTN. This suggests that reduced conversion of cortisol to cortisone does not contribute to the development of RHTN.

A dance intervention for cancer survivors and their partners (RHYTHM).

PURPOSE: The purpose of this study was to assess the feasibility, acceptability, and impact of a ballroom dance intervention on improving quality of life (QOL) and relationship outcomes in cancer survivors and their partners. METHODS: We conducted a pilot randomized controlled trial with two arms (Restoring Health in You (and Your Partner) through Movement, RHYTHM): (1) immediate dance intervention and (2) delayed intervention (wait-list control). The intervention consisted of 10 private weekly dance lessons and 2 practice parties over 12 weeks. Main outcomes were physical activity (Godin Leisure-Time Exercise Questionnaire), functional capacity (6 Minute Walk Test), QOL (SF-36), Couples' trust (Dyadic Trust Scale), and other dyadic outcomes. Exit interviews were completed by all participating couples. RESULTS: Thirty-one women survivors (68% breast cancer) and their partners participated. Survivors were 57.9 years old on average and 22.6% African American. Partners had similar characteristics. RHYTHM had significant positive effects on physical activity (p = 0.05), on the mental component of QOL (p = 0.04), on vitality (p = 0.03), and on the dyadic trust scale (p = 0.04). Couples expressed satisfaction with the intervention including appreciating the opportunity to spend time and exercise together. Survivors saw this light-intensity physical activity as easing them into becoming more physically active. CONCLUSIONS: Light intensity ballroom dancing has the potential to improve cancer survivors' QOL. Larger trials are needed to build strong support for this ubiquitous and acceptable activity. IMPLICATIONS FOR CANCER SURVIVORS: Ballroom dance may be an important tool for cancer survivors to return to a physically active life and improve QOL and other aspects of their intimate life.

Evaluation of Different Polishing Systems and Speeds for Dental Zirconia.

PURPOSE: To evaluate two polishing systems and three polishing speeds on the gloss, roughness, and heat production of yttria stabilized tetragonal zirconia polycrystal (Y-TZP). MATERIALS AND METHODS: A Y-TZP block (Zenostar Zr Translucent) was sectioned into 4-mm-thick sections. Specimens (n = 30 per polishing system) were first wet ground with a fine diamond bur at 200,000 RPM for 15 seconds. The baseline gloss of all specimens was measured in a glossmeter (60° angle) in a direction perpendicular to grinding. Initial surface roughness (Ra ) was determined on an optical profilometer in a direction perpendicular to grinding. The specimens were then polished with either a Dialite ZR Polishing Kit or a CeraMaster Polishing Kit. All grinding and polishing was performed by the same operator calibrated to apply approximately 2 N pressure. The medium grit polisher was used for 30 seconds, repeated for 30 seconds, and then the fine grit polisher was used. After each step, the gloss and roughness of each specimen was remeasured as described previously. Each polishing system was used at 5000, 15,000, and 40,000 RPM (n = 10 for each polish system/speed combination). A group of glazed specimens (n = 10) was evaluated for gloss and roughness as a control. The heat generated for each polishing step was measured with a thermocouple. The gloss and roughness of the specimens were analyzed using a linear mixed model and Tukey-Kramer post-hoc tests. Each step of polishing was compared to the glazed control group with an ANOVA and Dunnett's test. RESULTS: Polishing step, system, and speed were significant (p < 0.05) for gloss and roughness. Examination of system and step interaction was significant for gloss only. Post-hoc analysis revealed that 15,000 RPM produced higher gloss and lower roughness than other speeds. Each progressive step produced an improvement in gloss except for initial 30 seconds with the CeraMaster Coarse (medium polisher; p = 0.34). Roughness was also reduced at each progressive step. No polishing speed/system produced an increase in temperature above 41°C. Both polishing systems were capable of achieving a similar or superior roughness and gloss as the glazed control specimens after the final polishing step at 15,000 RPM. CONCLUSIONS: Fifteen thousand RPM is an optimal polishing speed. Progressing through the polishing sequence significantly improves gloss and roughness and can create similar values as glazed zirconia.