In Situ Construction of a Polymer Coating Layer on the LiNi0.8Co0.1Mn0.1O2 Cathode for High-Performance Lithium-Ion Batteries.

Lithium-ion batteries (LIBs) are known for their high energy density but exhibit poor cyclic stability and safety risks due to side reactions between the electrode and electrolyte. To address these issues, a novel approach involving construction of a polymer coating layer (PCL) via in situ self-polymerization using 2,2,3,4,4,4-hexafluorobutyl methacrylate (HFBM) as an electrolyte additive on the cathode is proposed. The PCL endows the electrolyte with a high onset oxidation potential (4.78 V) and lithium-ion transference number (0.52). The uniform and robust in situ constructed PCL can effectively inhibit the severe irreversible side reactions and suppress harmful reactions, thus providing a protective barrier against degradation. The resulting Li||LiNi0.8Co0.1Mn0.1O2 batteries exhibit an improved discharge capacity retention of 80% at 1C over 100 cycles. These results demonstrate that the in situ self-polymerization strategy holds promising potential for enhancing LIB performance and long-term stability, especially when high-voltage cathode materials are used.

Fabrication of Cu/ZnO-loaded chitosan hydrogel for an effective wound dressing material to advanced wound care and healing efficiency after caesarean section surgery.

Wound infections and delayed complications after caesarean section surgical procedure to mothers would have a prevalence of discomfort, stress and dissatisfaction in the postpartum period. In this report, one-pot synthesis is used for the preparation of chitosan (CS)-based copper nanoparticles (nCu), which was used for the preparation of zinc oxide (ZnO) hydrogel as wound dressing materials after surgery. The antibacterial activity of (CS-nCu/ZnO) developed hydrogels was studied zone of inhibition, against gram-positive and gram-negative bacteria. The antibacterial activity of the CS-nCu/ZnO hydrogel demonstrated that nanoformulated hydrogel materials have provided excellent bactericidal action against clinically approved bacterial pathogens. The biocompatibility and in vitro wound healing potential of the developed wound closure materials were studied by MTT assay and wound scratch assay methods, respectively. The MTT assay and cell migration assay results demonstrated that CS-nCu/ZnO hydrogel material induces cell compatibility and effective cell proliferation ability. These findings suggest that the CS-nCu/ZnO hydrogel outperforms CS-ZnO in terms of wound healing and could be used as a wound closure material in caesarean section wound treatment.

Exploiting Dynamic Nonlinearity in Upconversion Nanoparticles for Super-Resolution Imaging.

Single-beam super-resolution microscopy, also known as superlinear microscopy, exploits the nonlinear response of fluorescent probes in confocal microscopy. The technique requires no complex purpose-built system, light field modulation, or beam shaping. Here, we present a strategy to enhance this technique's spatial resolution by modulating excitation intensity during image acquisition. This modulation induces dynamic optical nonlinearity in upconversion nanoparticles (UCNPs), resulting in variations of nonlinear fluorescence response in the obtained images. The higher orders of fluorescence response can be extracted with a proposed weighted finite difference imaging algorithm from raw fluorescence images to generate an image with higher resolution than superlinear microscopy images. We apply this approach to resolve single nanoparticles in a large area, improving the resolution to 132 nm. This work suggests a new scope for the development of dynamic nonlinear fluorescent probes in super-resolution nanoscopy.

Long non-coding RNA LINC01347 suppresses trophoblast cell migration, invasion and EMT by regulating miR-101-3p/PTEN/AKT axis.

Recurrent miscarriage (RM) is one of the common complications of pregnancy, which is closely related to gene mutation. The profiling of non-coding RNAs showed that the expression level of long non-coding RNA LINC01347 (LINC01347) in the serum of patients with recurrent abortion was significantly increased, which could serve as a potential marker for early diagnosis. However, the biological functions of LINC01347 in the miscarriage remain to be elucidated. In this study, LINC01347 expression levels in HTR-8/SVneo cells and placenta samples were measured by RT-qPCR. The migration ability of HTR-8/SVneo cells was detected by wound-healing assay. Western blotting (WB) assay was conducted to measure E-cadherin, Vimentin, N-cadherin, PTEN, phospho-AKT(S473), phospho-AKT(T308) and AKT levels. Dual luciferase reporter assay and RNA pull-down analysis were performed to validate the molecular interactions. The results showed an upregulation of LINC01347 in the placenta samples of RM patients and HTR-8/SVneo cells. LINC01347 overexpression impaired the invasion and migration of trophoblast cells, while LINC01347 silencing promoted cell migration and invasion. LINC01347 level was also negatively correlated with the changes of epithelial-mesenchymal transition (EMT) markers in trophoblasts. We further demonstrated that miR-101-3p/PTEN/AKT axis played an important role in mediating the biological roles of LINC01347 in the invasion and migration of trophoblasts. In conclusion, our results revealed that LINC01347 suppresses the migratory ability and regulates the EMT processes in trophoblasts by regulating miR-101-3p/PTEN/AKT axis, suggesting that targeting LINC01347 may serve as a strategy to ameliorate RM.

Knockdown of lncRNA ACTA2-AS1 reverses cisplatin resistance of ovarian cancer cells via inhibition of miR-378a-3p-regulated Wnt5a.

Cisplatin (DDP) resistance is a principal cause leading to poor prognosis in females suffering from ovarian cancer (OC). Long non-coding RNA (lncRNA) has been shown to have an involvement in regulating cellular processes; chemoresistance being one of them the precise object of this work was to probe into the role of lncRNA ACTA2-AS1 in OC cells that have developed DDP resistance. We developed DDP-resistant OC cell lines (A2780/DDP and SKOV3/DDP). The influence of the ACTA2-AS1/miR-378a-3p/Wnt5a axis on DDP chemoresistance of DDP-resistant OC cells was ascertained using real-time PCR, Elisa, and CCK-8, and dual-luciferase reporter assay. In DDP-resistant cells and tissues, ACTA2-AS1 was increased, while a substantial downregulation in miR-378a-3p was noticed. In cells manifesting DDP-resistance, knocking down ACTA2-AS1 boosted the expression of miR-378a-3p. Further research into the mechanism of ACTA2-AS1 revealed that it acted as a 'sponge' by getting involved in a competition against miR-378a-3p binding to modify its target Wnt5a. The suppression of DDP-resistance in OC cells caused by ACTA2-AS1 downregulation was reversed by silencing miR-378a-3p. Furthermore, via inhibition of Wnt5a, miR-378a-3p alleviated DDP resistance in OC cells. These findings show that for miR-378a-3p, ACTA2-AS1 works like a sponge thus preventing it from binding to Wnt5a and boosting OC cell DDP resistance. Our research will aid the expansion of plausible therapeutic options for treating OC.

Clustered piperidinium-functionalized poly(terphenylene) anion exchange membranes with well-developed conductive nanochannels.

Anion exchange membrane fuel cells (AEMFCs) attract considerable attention owing to their high-power density and potential utilization of cheap non-noble metal catalysts. However, anion exchange membranes (AEMs) still face the problems of low conductivity, poor dimensional and chemical stability. To address these issues, AEMs with clustered piperidinium groups and ether-bond-free poly(terphenylene) backbone (3QPAP-x, x = 0.3, 0.4, and 0.5) were designed. Transmission electron microscope results show that the clustered ionic groups are responsible for fabricating well-developed conductive nanochannels and restraining the swelling behavior of the membranes. 3QPAP-0.4 and 3QPAP-0.5 AEMs exhibit higher conductivity (117.5 mS cm-1, 80 °C) and lower swelling ratio than that of commercial FAA-3-50 (80.4 mS cm-1, 80 °C). The conductivity of 3QPAP-0.5 only decreased by 10.4% after treating with 1 M NaOH at 80 °C for 720 h. The Hofmann elimination degradation of the cationic groups is restrained by the long flexible alkyl chain between cations. Based on the high performance of 3QPAP-0.5, an H2-O2-type AEMFC reaches 291.2 mW cm-2 (60 °C), which demonstrates that the as-prepared AEMs are promising for application in fuel cells.

Coupling hollow Fe3O4 nanoparticles with oxygen vacancy on mesoporous carbon as a high-efficiency ORR electrocatalyst for Zn-air battery.

Designing a low-cost, high-efficiency and robust doped-carbon-based oxygen reduction reaction electrocatalyst for large-scale implementations of fuel cells is highly desirable but challenging. In this work, we report a new type of hollow Fe3O4 with oxygen vacancy incorporating on mesoporous carbon prepared by pyrolyzing mesoporous carbon enriched with oxygen-containing functional groups, in combination with ferric acetylacetonate. The catalysts possess high specific surface area with predominantly mesoporous architecture and ultrahigh nitrogen content (up to 7.47 wt%). Benefiting from the integration of abundant active nitrogen and Fe-Nx species, and synergistic effect between Fe3O4 nanoparticles cooperated with oxygen vacancy and N-doped carbon, the half-wave potential of the preparing hybrid catalyst is 30 mV more positive than that of the commercial Pt/C catalyst in alkaline medium, and exhibits a high selectivity (4 e- process), and outstanding long-term stability. More importantly, the C-FePPDA-900 catalyst displays a high power density (106 mW cm-2) and specific capacity of 724 mAh gzn-1 when it is used as an air cathode catalyst in a specifically assembling Zn-air cell, superior to those of most reported catalysts.