Neu5Gc regulates decidual macrophages leading to abnormal embryo implantation.

Repeated implantation failure (RIF) is one of the most prominent problems in the field of assisted reproduction. Neu5Gc on the surface of decidual macrophages (dMΦ) leads to different activation patterns of dMΦ, which affects embryo implantation and development. Cmah-/- (Neu5Gc-deficient) mice induced to produce anti-Neu5Gc antibodies in vivo were given a special diet rich in Neu5Gc and their fertility was monitored. The long-term diet rich in Neu5Gc induced the decrease of endometrial receptivity of female mice. The pregnancy rate of female mice fed the normal diet was 63.6% (n = 11) and the average number of embryos was 9.571 ± 1.272, while the pregnancy rate of female mice fed the diet rich in Neu5Gc was 36.4% (n = 11) and the average number of embryos in pregnant mice was 5.750 ± 3.304. The intake of Neu5Gc and the production of anti-Neu5Gc antibody led to M1 polarization of endometrial dMΦ and abnormal embryo implantation.

Preparation of Cu2+/TA/HAP composite coating with anti-bacterial and osteogenic potential on 3D-printed porous Ti alloy scaffolds for orthopedic applications.

Because of stress shielding effects, traditional titanium (Ti) alloy scaffolds have a high elastic modulus, which might promote looseness and bone disintegration surrounding the implant, increasing the likelihood of a second surgery. In contrast, 3D-printed porous Ti alloy scaffolds can reduce the scaffold weight while enhancing biocompatibility. Further, these scaffolds' porous nature allows bone tissue ingrowth as well as strong pore connectivity, which can improve nutrient absorption. Nevertheless, bare Ti alloy implants may fail because of inadequate bone integration; hence, adding a coating on the implant surface is an effective technique for improving implant stability. In this study, a composite coating comprising hydroxyapatite (HAP), chitosan (CS), tannic acid (TA) and copper ions (Cu2+) (Cu2+/TA/HAP composite coating) was prepared on the surface of 3D printed porous Ti alloy scaffolds using electrophoretic deposition. Using the standard plate count method, Live/Dead bacteria staining assay, FITC Phalloidin and 4',6-diamidino-2-phenylindole staining assay, and live/dead staining of cells we determined that the composite coating has better antibacterial properties and cytocompatibility as well as lower cytotoxicity. The Alkaline Phosphatase assay revealed that the coating results showed good osteogenesis potential. Overall, the composite coatings produced in this investigation give new potential for the application of Ti alloys in clinics.

Ligustilide delays senescence of auditory cortex in mice by inhibiting ferritinophagy / 中国药理学通报

Aim To investigate the mechanism of ligu aged 2 months of the same strain were used as the constilide (LIG) in delaying the senescence of auditory trol (Ctrl) group. Auditory brainstem response test was cortex and treating central presbycusis. Methods used to detect the auditory threshold of mice before and Forty C57BL/6J mice aged 13 months were randomly di after treatment. Levels of serum MDA and activity of vided into ligustilide low-dose(L-LIG) group, ligustil serum SOD were detected to display the level of oxidative ide medium-dose (M-LIG) group, ligustilide high-dose stress. The pathological changes of auditory cortex were (H-LIG) group and aging (Age) group, and 10 mice observed by HE staining. Ferroptosis was observed by

Robustness assessment of cardiovascular meta-analysis / 中国胸心血管外科临床杂志

@#Objective     To evaluate the robustness of cardiovascular meta-analysis with use of fragility index. Methods     By searching PubMed, EMbase, and Web of Science databases from 2018 to 2022, relevant literature on cardiovascular meta-analysis was systematically collected and the fragility indexes were calculated; Spearman correlation analysis was used to explore the relationship between fragility index and sample size, total number of events, effect size and its confidence interval width. Results     A total of 212 meta-analyses from 29 articles were included, with a median fragility index of 11 (5, 25), a median sample size of 10 301 (3 384, 48 330), and a median total number of events of 360 (129, 1 309). Most meta-analyses chose relative risk as the effect measure (179/212), and chose Mantel-Haenszel method (102/212) and random effects model (153/212). The fragility index was positively correlated with the sample size (rs=0.56, P<0.05) and the total number of events (rs=0.61, P<0.05), and negatively correlated with confidence interval width of the effect size (rs=−0.52, P<0.05). No statistically significant results were obtained in the correlation between the fragility index and effect size. Conclusion     The fragility indexes of cardiovascular meta-analyses published in comprehensive journals of high impact factors and professional cardiovascular journals are generally low, and therefore lack robustness. Fragility index is suggested to be reported in medical researches, assisting in explaining the P-value.

Delayed pathological finding of a small fish bone causing a purulent cyst in the pharynx: a case report.

We describe the case of a patient who swallowed a small fish bone and felt it lodge in her pharynx, but failed to seek medical attention in a timely manner. One week later, no foreign body was found in the hypopharynx or larynx, but a small purulent cyst was present in the epiglottic vallecula. A computed tomography scan showed a high-density area on the lingual surface of the epiglottis, which was considered to represent an embedded fish bone. A week later, the patient's discomfort had subsided, and flexible videoendoscopy showed that the purulent cyst in the epiglottic vallecula had disappeared. We surmise that the purulent cyst had ruptured spontaneously and the foreign body had been discharged. This represents an example of how an impacted small foreign body may be spontaneously discharged from the body.

A comparative study of different sleep assessment methods for preschool children.

PURPOSE: This study aimed to examine the differences between different sleep assessment methods for preschool children. METHODS: Preschool children (n = 54, mean age: 4.6 years) were recruited from kindergarten. Data were collected using an accelerometer, a sleep log, and sleep questionnaire. Furthermore, correlation analysis, Bland-Altman analysis, and repeated measures ANOVA were performed. RESULTS: (1) The sleep duration evaluated by different sleep assessment methods were all significantly correlated, among which the sleep log and Sadeh algorithm showed the highest correlation (r = 0.972, p < .001), while the Tudor-Locke algorithm and the sleep questionnaire demonstrated the lowest correlation (r = 0.383, p < .01); (2) The points between different sleep assessment methods were all within 95% LoA, except for the sleep log and Tudor-Locke algorithm; (3) In various methods of sleep assessment, significant differences were observed in sleep onset (F2 (1.6,85.0) = 32.8, p < .001, η2 : 0.38), while no significant differences were observed in sleep offset (F2 (1.5,80.1) = 32.8, p = .05, η2 : 0.05); (4) In addition, no significant difference in sleep onset was observed between the sleep questionnaire and sleep log (p > .05), and there was also no significant difference in sleep onset between the Sadeh algorithm and the Tudor-Locke algorithm (p > .05). CONCLUSIONS: Both the Sadeh algorithm and the Tudor-Locke algorithm can be used as effective algorithms for sleep duration assessment of Chinese preschool children, with the latter having obvious advantages in large sample surveys. Future research should pay attention to the differences between different sleep assessment methods when using these algorithms.

Stability and taste evaluation of two kinds of oral solvent after extemporaneous compounding / 药学学报

A flavoring agent and a suspension agent were prepared for extemporaneous compounding. The stability of the two agents before and after drug loading was investigated, and the taste of the suspension after extemporaneous compounding was evaluated by electronic tongue technology. The two agents remained stable under the conditions of influence factor test, accelerated test and long-term test. The appearance properties of the two agents did not change. The relative density of the flavoring agent was maintained at 1.053-1.075, and the pH was stable at 4.2-4.5. The relative density of the suspension agent was maintained at 0.999-1.022, and the pH was stable at 4.0-4.5. Seven kinds of drugs, including warfarin sodium tablets and spironolactone tablets, were mixed with these two oral solvents, and the content uniformity and stability were detected respectively. The results showed that the preparations could be evenly dispersed and the physical and chemical properties were stable. The results of taste evaluation showed that in captopril group and chloral hydrate group, the flavoring agent had the best effect on taste correction. In warfarin sodium group, rifampicin group, spironolactone group, vitamin B1 group and vitamin B2 group, the blending agents had the best effect on taste correction.

Effects of PEEK Anisotropy Formed by 3D Printing on Mechanical Properties of Femoral Substitutes / 医用生物力学

Objective Aiming at the problem of significant anisotropy in the three-dimensional ( 3D) printed polyether-ether-ketone ( PEEK) bone substitutes manufactured by material extrusion technology, taking the femur, the main load-bearing long bone of the lower limb, as an example, the biomechanical properties of the femoral model under different direction in the build chamber were evaluated by the combination of finite element analysis and in-vitro mechanical experiment. Methods A left femoral model was obtained by reconstruction from CT data. The stress and displacement of the 3D printed PEEK femur with different directions in the build chamber under five physiological postures in the human gait cycle were simulated by varying the orthogonal anisotropy mechanical properties. An in-vitro mechanical experiment was conducted to investigate the safety and stability of the femur through a 3D printed PEEK femur. Results When the long axis of the femur model was perpendicular to the building platform of the 3D printer, a better mechanical property was obtained, and the maximum von Mises stress was 46. 56 MPa, which was lower than the yield stress of PEEK, while the maximum displacement was larger than that of the natural femur under same loading condition. Therefore, the 3D printed PEEK femur met the strength requirement, but the stability needs to be improved. Conclusions The long axis is recommended to be perpendicular to the building platform when the material extrusion technology was used for the substitute of the load-bearing long bone, and the effect of its anisotropy on service performance of the substitute should be carefully considered when the 3D printing technology is used for load-bearing bone substitute.

Mining and identification of members of MYB transcription factor family in Lonicera macranthoides / 中国中药杂志

As a large family of transcription factors, the MYB family plays a vital role in regulating flower development. We studied the MYB family members in Lonicera macranthoides for the first time and identified three sequences of 1R-MYB, 47 sequences of R2R3-MYB, two sequences of 3R-MYB, and one sequence of 4R-MYB from the transcriptome data. Further, their physicochemical properties, conserved domains, phylogenetic relationship, protein structure, functional information, and expression were analyzed. The results show that the 53 MYB transcription factors had different conserved motifs, physicochemical properties, structures, and functions in wild type and 'Xianglei' cultivar of L. macranthoides, indicating their conservation and diversity in evolution. The transcript level of LmMYB was significantly different between the wild type and 'Xianglei' cultivar as well as between flowers and leaves, and some genes were specifically expressed. Forty-three out of 53 LmMYB sequences were expressed in both flowers and leaves, and 9 of the LmMYB members showed significantly different transcript levels between the wild type and 'Xianglei' cultivar, which were up-regulated in the wild type. The results provide a theoretical basis for further studying the specific functional mechanism of the MYB family.

Quality of Images Reconstructed by Deep Learning Reconstruction Algorithm for Head and Neck CT Angiography at 100 kVp / 中国医学科学院学报

Objective To evaluate the impact of deep learning reconstruction algorithm on the image quality of head and neck CT angiography (CTA) at 100 kVp. Methods CT scanning was performed at 100 kVp for the 37 patients who underwent head and neck CTA in PUMC Hospital from March to April in 2021.Four sets of images were reconstructed by three-dimensional adaptive iterative dose reduction (AIDR 3D) and advanced intelligent Clear-IQ engine (AiCE) (low,medium,and high intensity algorithms),respectively.The average CT value,standard deviation (SD),signal-to-noise ratio (SNR),and contrast-to-noise ratio (CNR) of the region of interest in the transverse section image were calculated.Furthermore,the four sets of sagittal maximum intensity projection images of the anterior cerebral artery were scored (1 point:poor,5 points:excellent). Results The SNR and CNR showed differences in the images reconstructed by AiCE (low,medium,and high intensity) and AIDR 3D (all P<0.01).The quality scores of the image reconstructed by AiCE (low,medium,and high intensity) and AIDR 3D were 4.78±0.41,4.92±0.27,4.97±0.16,and 3.92±0.27,respectively,which showed statistically significant differences (all P<0.001). Conclusion AiCE outperformed AIDR 3D in reconstructing the images of head and neck CTA at 100 kVp,being capable of improving image quality and applicable in clinical examinations.

In vitro efficacy and combined drug sensitivity of lycosin-I against methicillin-resistant Staphylococcus aureus / 中华检验医学杂志

Objective:The aim of this study was to evaluate the in vitro activity of lysosin-Ⅰ against Methicillin-resistant Staphylococcus aureus (MRSA) and its synergistic effect with eight common antibacterial drugs against MRSA. Methods:This study was conducted following the design principles of a randomized controlled trials. Ten MRSA isolates, clinically isolated from the Second Xiangya Hospital of Central South University between September and November 2021, were determined the minimum inhibitory concentration (MIC), minimum bactericidal concentration (MBC), and bactericidal kinetic test of lycosin-Ⅰ in vitro anti-MRSA by micro-broth dilution method. Additionally, the micro-broth chessboard dilution method was utilized to evaluate the in vitro efficacy of lycosin-Ⅰ in combination with eight common antimicrobial agants, including penicillin, erythromycin, levofloxacin, gentamicin, rifampicin, minocycline, vancomycin, and linezolid. Results:The MIC range of lycosin-Ⅰ against MRSA was found to be between 4-8 mg/L with the MIC 50 and MIC 90 were 4 mg/L and 8 mg/L, respectively. The range of MBC was also between 4-8 mg/L, and the ratio of MBC/MIC was 1-2. The bactericidal kinetics test revealed that the number of surviving MRSA clinical isolates and standard strains initially decreased rapidly but then showed a resurgence when the concentration of lycosin-Ⅰ was 1/2 MIC or MIC. While, the bacterial load gradually reduced until complete elimination when the concentration was at 2 MIC or 4 MIC. The combination of lycosin-Ⅰ and gentamicin exhibited mainly synergistic effects, while the combination with other antibiotics showed mainly additive effects. Moreover, the combination of lycosin-Ⅰ and antibacterial drugs can significantly reduce the MIC 50 and MIC 90 of antibiotics. Conclusion:lycosin-Ⅰ has great antibacterial and bactericidal activity against MRSA in vitro with rapid and thorough sterilization effect and it can play a synergistic or additive role when combined with other antibacterial drugs against MRSA in vitro.

Three-dimensional printing technology in reverse shoulder arthroplasty after resection of proximal humeral tumors / 中华骨科杂志

Objective:To analyze the efficacy of the reconstruction of the proximal humerus by reverse shoulder arthroplasty with three-dimensional (3D) printing technology after tumor rescetion.Methods:A retrospective analysis was conducted on the data of eight patients undergoing semi-constrained reverse shoulder arthroplasty with 3D printing technology after the resection of bone tumors in proximal humeri at the Affiliated Wuxi People's Hospital of Nanjing Medical University from December 2017 to January 2021. There were four males and four females with an average age of 55.1 (range, 31-73) years, all of whom had unilateral onset, 2 on the left and 6 on the right. There was one case of leiomyosarcoma (Enneking IIB), two cases of chondrosarcomas (one Enneking IA and one Enneking IB), four cases of Campanacci grade 3 giant cell tumor of bone, and one case of bone metastasis of lung adenocarcinoma. Individualized prosthesis and implantation protocol were completed preoperatively in all patients. The glenoid baseplate was manufactured using 3D printing technology. During the surgery, Malawer type I tumor resection and semi-constrained reverse shoulder arthroplasty were performed, with 6 cases simultaneously using allograft-prosthetic composite reconstruction. The follow-up was scheduled, and the patient received X-ray examination of the shoulder. The range of motion of the shoulder was measured, the Constant-Murley score and musculoskeletal tumor society (MSTS) score were recorded.Results:All 8 patients successfully completed the surgery, with a surgical time of 173.8±46.7 min (range, 130-260 min), intraoperative blood loss of 487.5±334.6 ml (range 200-1,200 ml), and proximal humeral resection of 9.9±4.6 cm (range, 4.5-19.0 cm). All patients were followed up for a period of 45.6±12.5 months (range, 24-60 months). At the last follow-up, the abduction ranges of motion of the affected shoulders increased from 27.5°±14.4° pre-operatively to 106.3°±21.8° post-operatively, with a statistically significant difference ( t=11.37, P<0.001). The forward flexion ranges increased from 28.1°±12.8° pre-operatively to 115.6°±24.0° post-operatively, with a statistically significant difference ( t=11.49, P<0.001). The Constant-Murley score was improved from 40.5±14.3 pre-operatively to 79.3±11.2 post-operatively, with a statistically significant difference ( t=9.58, P<0.001). The MSTS score was 25.6±2.2 (range, 23-28), including 6 excellent cases and 2 good cases. At 2 weeks after surgery, one patient experienced joint dislocation that was successfully reduced manually. Up to the final follow-up, all patients had survived without local tumor recurrence, metastasis, prosthesis infection and loosening. Conclusion:3D printing technology assisted shoulder arthroplasty is helpful for effective reconstruction and shoulder joint function recovery after resection of proximal humeral tumors, with satisfactory outcomes in the early and middle stages.

Digital design and 3D-printed customized flanged cups in hip revision with severe acetabular bone defects / 中华骨科杂志

Objective:To investigate the effect of 3D-printed customized flanged cup in hip revision with severe acetabular bone defects.Methods:Since February 2017, 10 cases of 3D-printed customized flanged cups were used in hip revision with severe acetabular bone defects, including 2 cases of Paprosky type IIIA and 8 cases of Paprosky type IIIB. There were 5 males and 5 females, mean age 73.6±8.1 yrs (range, 62-87 yrs), 5 left and 5 right cases. The preoperative thin-layer CT scan was preformed to reverse reconstruct digital pelvis. Five cases of one-piece flanged cups and 5 cases of decomposed flanged cups, including 3 cases of composite one-piece cups were designed by computer. The surgery was performed strictly according to the plan.Postoperative follow-up was performed to evaluate the Harris score. Operation time,intraoperative bleeding and other complications such as vascular and nerve injury, postoperative infection, and dislocation were counted. Pelvic X-ray was used to assess the height and horizontal position of the center of rotation and the stability of the prosthesis.Results:The surgical procedure was successful, with an average operative time of 147.9±48.3 min (range, 96-212 min) and an average intraoperative bleeding of 730.4±262.6 ml (range, 500-1 300 ml). The mean time of final follow-up was 40.8±18.7 months (range, 16-70 months) after surgery. At the last follow-up, the average Harris score was 83.80±6.73, with 4 cases excellent, 5 cases good, and 1 case fair. The excellent and good rate was 90%. The last Harris score was significantly higher than that before operation 28.60±8.40 ( t=16.84, P<0.001). The height of affected hip joint rotation center decreased from 46.24±7.74 mm before operation to 15.54±2.54 mm after operation with significant difference ( t=14.61, P<0.001). It was slightly higher than the opposite side (13.81±1.48 mm), which had no significant difference ( t=1.83, P=0.100). The horizontal distance of affected hip joint rotation center increased from 33.79±5.27 mm before operation to 40.53±4.50 mm after operation with significant difference ( t=3.62, P=0.006). It had no significant difference ( t=1.28, P=0.232) compared with the opposite side (38.54±3.46 mm). All incisions were healed in one stage without infection, vascular or nerve injury. During the following-up, all prostheses were in satisfied position without loosening, dislocation or screw breaks. Conclusion:Digitally assisted 3D-printed flanged cups can be used in hip revision with severe acetabular bone defect. It can not only improve hip joint function, but also restore the acetabular rotation center and the prosthesis stability, which can achieve good early and mid-term effect.

Interventional treatment of chylous leakage in 60 cases: a preliminary study / 中华放射学杂志

Objective:To evaluate the feasibility, safety, treatment outcome, and the individualized surgical procedure selection of the interventional treatments of chylous leakage.Methods:From July 2019 to January 2022, the clinical data of 60 consecutive patients with chylous leakage underwent interventional treatment were respectively analyzed. The cases included chylothorax ( n=37), chylous ascites ( n=10), chyluria ( n=4), chylothorax combined with chylous ascites ( n=5), chylothorax combined with chylopericardium ( n=2), and pelvic chylous effusion ( n=2). Conservative treatment was considered to have failed for all patients. The lymphangiography was firstly performed to detect chylous leakage, then an individualized procedure was selected according to the lymphangiography results. The treatment outcomes and complications were recorded, and follow-up was performed. Results:Lymphangiography was technically successful in 55 of 60 patients (91.7%), and no cisterna chyli and thoracic duct opacification was observed in 5 patients. The procedures for the patients included lymphangiography alone ( n=23), thoracic duct embolization ( n=23), thoracic duct disruption ( n=5), lymphatic embolization for pelvic chylous effusion ( n=4), and balloon plasty for thoracic duct ( n=5). Clinical success was achieved in 53 of 60 cases (88.3%). The complication rate was 8.3% (5/60), and all complications were minor. The median follow-up time was 11 months (range 0.5-30 months) for 56 patients, and 4 patients were lost to follow-up. There was one patient presenting the reoccurrence of symptom, and 8 patients died. Conclusions:The interventional treatment of chylous leakage is safe with good outcomes and low complication rate. Individualized treatment procedures based on the lymphangiography findings is feasible and with good curative effect.

A survey on self-management level and physical activity in patients with type 2 diabetes mellitus of Zang and Han nationalities in Tibetan of China / 中国基层医药

Objective:To investigate the level of self-management and daily physical activity in patients with type 2 diabetes mellitus (T2DM) of Zang and Han nationalities in Tibetan, China, and to compare the difference in daily management between T2DM patients of Zang and Han nationalities, to develop reasonable and effective chronic disease management strategies for long-term out-of-hospital management of T2DM patients of Zang nationalities.Methods:A total of 265 T2DM patients with glycosylated hemoglobin (HbA1c) ≥ 7% who were admitted to the Endocrinology Ward of the Hospital of Chengdu Office of People's Government of Tibet Autonomous Region from November 2020 to April 2021 and who were from different regions of Tibet were included in this study according to inclusion and exclusion criteria. The general data of all included patients were collected. Glucose and lipid metabolism-related indicators were determined. The Generalized Diabetes Self-Management Efficacy Scale and International Physical Activity Questionnaires (IPAQ) were used to evaluate patients' levels of self-management and daily physical activity.Results:The hemoglobin level in T2DM patients of Zang nationality was (154.09 ± 24.11) g/L, which was significantly higher than that in T2DM patients of Han nationality ( P < 0.05). The total cholesterol, fasting blood glucose, and low-density lipoprotein in T2DM patients of Zang nationality were (4.63 ± 1.41) mmol/L, (7.94 ± 2.19) mmol/L, and (2.75 ± 1.11) mmol/L, respectively, which significantly higher compared with T2DM patients of Han nationality (all P < 0.05). Compared with T2DM patients of Han nationality, T2DM patients of Zang nationality had lower self-management scores (81.40 ± 15.44) points, diet control scores (17.26 ± 4.97) points, physical exercise scores (11.67 ± 4.42) points, prevention and treatment of high and low blood sugar score (12.21 ± 5.72) points. The differences were statistically significant (all P < 0.05). Moderate-intensity physical activity was a significant difference between T2DM patients of Zang and Han nationalities ( P < 0.05). Conclusion:Compared with T2DM patients of Han nationality, T2DM patients of Zang nationality have lower overall self-management levels, including diet control, physical exercise, prevention and management of high and low blood glucose, and moderate-intensity physical activity. Targeted individualized education should be carried out according to the Tibetan cultural characteristics, to further develop an intervention method and an out-of-hospital management strategy for chronic disease, which are suitable for T2DM patients of Zang nationality.

Comparison of changes in functional optical zone and corneal morphology between SMILE and FS-LASIK in myopes / 中华实验眼科杂志

Objective:To compare the changes in functional optical zone (FOZ) and corneal morphology in myopes between femtosecond small incision laser lenticule extraction (SMILE) and femtosecond laser-assisted in situ keratomileusis (FS-LASIK).Methods:A cohort study was performed.A total of 94 patients (94 eyes) who underwent FS-LASIK or SMILE at Eye Hospital, Wenzhou Medical University from March to December 2021 were enrolled.The selected patients were divided into a SMILE group (46 cases, 46 eyes) and an FS-LASIK group (48 cases, 48 eyes) according to the surgical procedure, and the follow-up period was 6 months.The primary outcome measures were postoperative changes in corneal FOZ and Q-value, and the secondary outcome measures were changes in central corneal thickness (CCT) and mean corneal curvature (Km). Corneal Q-value, horizontal and vertical FOZ diameters, CCT, and Km were recorded before surgery and at 1 day, 1 week, 1 month, and 6 months after surgery using the Pentacam anterior segment analysis system, and the differences in each parameter and the trends of changes between the two groups were compared.This study adhered to the Declaration of Helsinki and was approved by the Ethics Committee of Eye Hospital, Wenzhou Medical University (No.2021-034-k-27). Written informed consent was obtained from each subject.Results:There were statistically significant overall differences in the postoperative horizontal and vertical FOZ diameters between the two groups (horizontal diameter: Fgroup=7.06, P<0.001; Ftime=64.18, P=0.001; vertical diameter: Fgroup=11.08, P<0.001; Ftime=77.14, P<0.001). The horizontal and vertical FOZ diameters were significantly larger in SMILE group than in FS-LASIK group at various postoperative time points, and the differences were statistically significant (all at P<0.001). In the two groups, the postoperative 1-week, 1-month and 6-month horizontal FOZ diameters and the postoperative 1-week and 1-month vertical FOZ diameters were smaller than the postoperative 1-day ones, and the differences were statistically significant (all at P<0.05). There were significant overall differences in Q-values at different postoperative time points between the two groups ( Fgrouup=53.11, P=0.019; Ftime=29.18, P<0.001). The postoperative 1-day, 1-week, and 1-month Q-values of FS-LASIK group were significantly higher than those of SMILE group (all at P<0.05). The postoperative 1-week Q-value was significantly larger than the postoperative 1-day value in SMILE group ( P<0.001). The postoperative Q-values gradually decreased with time in FS-LASIK group, with significant pairwise differences at all adjacent time points (all at P<0.001). There were significant differences in CCT at various postoperative time points between the two groups ( Ftime=21.43, P<0.01). In FS-LASIK group, the CCT was decreased at 1 week than 1 day after surgery and was increased at 6 months than 1 week after surgery, and the differences were statistically significant (all at P<0.05). In SMILE group, the postoperative 1-week, 1-month and 6-month CCT was increased in comparison with the postoperative 1-day value, and the differences were statistically significant (all at P<0.05). There was no significant overall difference in the Km between the two groups ( Fgroup=27.29, P=0.41). There were significant pairwise differences in the Km at different postoperative time points between the two groups (all at P<0.001). The postoperative 6-month Km was smaller than the postoperative 1-day value in SMILE group, and the postoperative 6-month Km was greater than the postoperative 1-day value in FS-LASIK group (both at P<0.05). Conclusions:The FOZ shows a trend of gradual reduction within a month after SMILE and FS-LASIK.The FOZ is larger after SMILE than after FS-LASIK.The morphologic stability of corneal FOZ is better after SMILE than after FS-LASIK.

Application value of short-term prehabilitation in elderly patients undergoing gastrointestinal tumor surgery / 中国实用护理杂志

Objective:To explore the effectiveness of short-term prehabilitation in elderly patients undergoing gastrointestinal tumor surgery.Methods:Elderly patients(139 cases) with gastrointestinal tumors who were admitted to Nanfang Hospital, Southern Medical University for surgery from December 2020 to January 2022 were included through the purposive sampling method, and were divided into the intervention group (69 cases) and the control group (70 cases) according to the patient's wishes using a quasi-experimental research design of non randomized grouped. Routine perioperative nursing was used in the control group, while the short-term prehabilitation was used in the intervention group in addition. The incidence of postoperative complications, the performance indicators, and postoperative functional recovery indicators were analyzed in the two groups.Results:The 6MWD in the intervention group of 1 day and 7 days after the surgery were (460.93 ± 76.36) m and (391.72 ± 72.93) m, which were significant higher than those in the control group, (423.69 ± 72.88) m and (351.13 ± 65.04) m ( t = 8.65, 12.01, both P<0.05). The first exhaust time, first postoperative ambulatory time, the first full fluid intake time and the duration of drainage tube indwelling in the intervention group were (51.28 ± 21.74) h, (33.93 ± 12.50) h, (69.39 ± 29.36) h and (4.30 ± 1.44) d, which were significant lower than those in the control group, (71.51 ± 23.68) h, (47.37 ± 14.58) h, (96.29 ± 38.36) h and (5.35 ± 2.09) d ( t values were -5.83 - -3.44, all P<0.05). Besides, the best critical value of preoperative 6MWD to predict postoperative rehabilitation effect was 477.5 m, with a sensitivity of 68% and specificity of 71%. Conclusions:Short-term prehabilitation improves the perioperative functional reserve and promotes overall functional recovery after surgery to a certain extent, and the postoperative functional recovery effect may be better when the patient′s preoperative 6MWD reaches 477.5 m.

Efficacy and safety of Omalizumab for the treatment of pediatric allergic asthma: a retrospective multicenter real-world study in China / 中华实用儿科临床杂志

Objective:To assess the clinical effectiveness and safety of Omalizumab for treating pediatric allergic asthma in real world in China.Methods:The clinical data of children aged 6 to 11 years with allergic asthma who received Omalizumab treatment in 17 hospitals in China between July 6, 2018 and September 30, 2020 were retrospectively analyzed.Such information as the demographic characteristics, allergic history, family history, total immunoglobulin E (IgE) levels, specific IgE levels, skin prick test, exhaled nitric oxide (FeNO) levels, eosinophil (EOS) counts, and comorbidities at baseline were collected.Descriptive analysis of the Omalizumab treatment mode was made, and the difference in the first dose, injection frequency and course of treatment between the Omalizumab treatment mode and the mode recommended in the instruction was investigated.Global Evaluation of Treatment Effectiveness (GETE) analysis was made after Omalizumab treatment.The moderate-to-severe asthma exacerbation rate, inhaled corticosteroid (ICS) dose, lung functions were compared before and after Omalizumab treatment.Changes in the Childhood Asthma Control Test (C-ACT) and Pediatric Asthma Quality of Life Questionnaire (PAQLQ) results from baseline to 4, 8, 12, 16, 24, and 52 weeks after Omalizumab treatment were studied.The commodity improvement was assessed.The adverse event (AE) and serious adverse event (SAE) were analyzed for the evaluation of Omalizumab treatment safety.The difference in the annual rate of moderate-to-severe asthma exacerbation and ICS reduction was investigated by using t test.The significance level was set to 0.05.Other parameters were all subject to descriptive analysis.A total of 200 allergic asthma patients were enrolled, including 75.5% ( n=151) males and 24.5% ( n=49) females.The patients aged (8.20±1.81) years. Results:The median total IgE level of the 200 patients was 513.5 (24.4-11 600.0) IU/mL.Their median treatment time with Omalizumab was 112 (1-666) days.Their first dose of Omalizumab was 300 (150-600) mg.Of the 200 cases, 114 cases (57.0%) followed the first Omalizumab dosage recommended in the instruction.After 4-6 months of Omalizumab treatment, 88.5% of the patients enrolled ( n=117) responded to Omalizumab.After 4 weeks of treatment with Omalizumab, asthma was well-controlled, with an increased C-ACT score [from (22.70±3.70) points to (18.90±3.74) points at baseline]. Four-six months after Omalizumab administration, the annual rate of moderate-to-severe asthma exacerbation had a reduction of (2.00±5.68) per patient year( t=4.702 5, P<0.001), the median ICS daily dose was lowered [0 (0-240) μg vs. 160 (50-4 000) μg at baseline] ( P<0.001), the PAQLQ score was improved [(154.90±8.57) points vs. (122.80±27.15) points at baseline], and the forced expiratory volume in one second % predicted (FEV 1%pred) was increased [(92.80±10.50)% vs. (89.70±18.17)% at baseline]. In patients with available evaluations for comorbidities, including allergic rhinitis, atopic dermatitis or eczema, urticaria, allergic conjunctivitis and sinusitis, 92.8%-100.0% showed improved symptoms.A total of 124 AE were reported in 58 (29.0%) of the 200 patients, and the annual incidence was 0(0-15.1) per patient year.In 53 patients who suffered AE, 44 patients (83.0%) and 9 patients (17.0%) reported mild and moderate AE, respectively.No severe AE were observed in patients.The annual incidence of SAE was 0(0-1.9) per patient year.Most common drug-related AE were abdominal pain (2 patients, 1.0%) and fever (2 patients, 1.0%). No patient withdrew Omalizumab due to AE. Conclusions:Omalizumab shows good effectiveness and safety for the treatment of asthma in children.It can reduce the moderate-to-severe asthma exacerbation rate, reduce the ICS dose, improve asthma control levels, and improve lung functions and quality of life of patients.

Progress of ibrutinib combined with CD19 chimeric antigen receptor T-cell in treatment of chronic lymphocytic leukemia / 白血病·淋巴瘤

Chronic lymphocytic leukemia (CLL) is a clonal malignant disease of B lymphocytes (T lymphocytes are rare) and usually occurs in elderly people. CLL has a highly variable clinical course, with a median survival of 35 to 63 months. In the era of immunochemotherapy, the survival of CLL patients has improved significantly, but most patients still have primary drug resistance and relapse after the treatment. The emergence of Bruton tyrosine kinase inhibitor has completely changed the treatment mode of CLL, making the treatment of CLL into the era of targeted therapy. Ibrutinib combined with CD19 chimeric antigen receptor T-cell has good efficacy and can improve the prognosis of patients.