Electrochemically Reduced Graphene Oxide-Based Screen-Printed Electrodes for Total Tetracycline Determination by Adsorptive Transfer Stripping Differential Pulse Voltammetry.

Disposable electrochemically reduced graphene oxide-based (ERGO) screen-printed electrodes (SPE) were developed for the determination of total tetracyclines as a sample screening approach. To this end, a selective adsorption-detection approach relied on adsorptive transfer stripping differential pulse voltammetry (AdTDPV) was devised, where the high adsorption capacity and the electrochemical properties of ERGO were simultaneously exploited. The approach was very simple, fast (6 min.), highly selective by combining the adsorptive and the electrochemical features of tetracyclines, and it used just 10 µL of the sample. The electrochemical sensor applicability was demonstrated in the analysis of environmental and food samples. The not-fully explored AdTDPV analytical possibilities on disposable nanostructured transducers become a new tool in food and environmental fields; drawing new horizons for "in-situ" analysis.

A soft material for chromium speciation in water samples using a chemiluminescence automatic system.

A soft material formed by multiwall carbon nanotubes and 1-butyl-3-methyl imidazolium chloride was used as sorbent material to perform the chromium speciation in natural waters. This soft material was not yet used for the speciation of metals as chromium. Thus, a multicommutated flow system containing a minicolumn packed with the soft material was designed. The procedure was based on the capacity of the sorbent to retain Cr(VI) as Cr2O7= and allow to pass Cr(III) through the column. Then, a fully automated flow-batch analysis system was developed to quantify both species using chemiluminescence detection. Thus, Cr(III) was determined as catalyst of the luminol and hydrogen peroxide reaction and Cr(VI) as oxidant of luminol reaction. This represents a new approach because the oxidation of luminol using Cr2O7= has not been reported in literature. The variables of the two systems were optimized. The limits of detection were 1.4 µg L-1 for Cr(VI) and 4.0 µg L-1 for Cr(III). The precision of the method was 3.8% and 7.0% for Cr(VI) and Cr(III), respectively. The present method was applied to real water samples with recoveries between 95% and 107%. Besides, these results were in accordance with those obtained using inductive coupled plasma-optical emission spectrometry technique.

Flow-batch analysis of clenbuterol based on analyte extraction on molecularly imprinted polymers coupled to an in-system chromogenic reaction. Application to human urine and milk substitute samples.

A fully automated spectrophotometric method based on flow-batch analysis has been developed for the determination of clenbuterol including an on-line solid phase extraction using a molecularly imprinted polymer (MIP) as the sorbent. The molecularly imprinted solid phase extraction (MISPE) procedure allowed analyte extraction from complex matrices at low concentration levels and with high selectivity towards the analyte. The MISPE procedure was performed using a commercial MIP cartridge that was introduced into a guard column holder and integrated in the analyzer system. Optimized parameters included the volume of the sample, the type and volume of the conditioning and washing solutions, and the type and volume of the eluent. Quantification of clenbuterol was carried out by spectrophotometry after in-system post-elution analyte derivatization based on azo-coupling using N- (1-Naphthyl) ethylenediamine as the coupling agent to yield a red-colored compound with maximum absorbance at 500nm. Both the chromogenic reaction and spectrophotometric detection were performed in a lab-made flow-batch mixing chamber that replaced the cuvette holder of the spectrophotometer. The calibration curve was linear in the 0.075-0.500mgL-1 range with a correlation coefficient of 0.998. The precision of the proposed method was evaluated in terms of the relative standard deviation obtaining 1.1% and 3.0% for intra-day precision and inter-day precision, respectively. The detection limit was 0.021mgL-1 and the sample throughput for the entire process was 3.4h-1. The proposed method was applied for the determination of CLB in human urine and milk substitute samples obtaining recoveries values within a range of 94.0-100.0%.

A simple and new reverse liquid-liquid microextraction for the automated spectrometric determination of doxycycline in chicken fat.

This work presents a new, simple and inexpensive reverse liquid-liquid microextraction of doxycycline (DOC) from chicken fat. In this just 13min extraction methodology, acidulated water, as extraction solvent (400µL), was used. A monochannel flow injection system was designed for the spectrometric determination of the analyte (ʎ=344nm). The extracted solution containing DOC was loaded into the injection valve of the continuous flow manifold. A lineal range between 100 and 700µgDOCkg-1 sample was obtained. The LOD and LOQ were 33µgkg-1 and 100µgkg-1 respectively. The relative standard deviation was 4.87% and the sample throughput for the entire process was 4.5h-1. As recovery values when the method was applied to real samples showed variability, the expanded uncertainties were calculated. Their values indicated that the new method is independent of the concentration of the analyte and the origin of the sample.

Ionic liquid mediated extraction, assisted by ultrasound energy, of available/mobilizable metals from sediment samples.

A new extraction method for metals from sediment samples was developed. In this procedure, the chelating agent EDTA was combined with a minimal amount of the ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate (Bmim[BF4]), assisted by ultrasound energy. The available analytes -Cd, Cr, Cu, Ni, Pb and Zn- were extracted under optimal conditions for a 12.5 ratio (extractant volume/sample mass) with 0.005molL-1 EDTA solution, 0.1molL-1 NaHCO3, 5.0mmolL-1 Bmim[BF4] and 7.0min of sonication time, using an ultrasonic bath (output power of 160W). The best extractions were obtained with 100W (power dissipated in the liquid). These conditions were obtained applying the univariate method. It is important to highlight that the conventional method (extraction with 0.05molL-1 EDTA solution only) consumes 6h to extract available metals from sediment samples selectively, and with the proposed procedure the extraction time is noticeable reduced to 7.0min. Extractable metal concentrations obtained were measured by flame atomic absorption spectrometry. The results showed good agreement with those obtained by the conventional method using a Student's paired t-test.

In-line coupled single drop liquid-liquid-liquid microextraction with capillary electrophoresis for determining fluoroquinolones in water samples.

A simple in-line single drop liquid-liquid-liquid microextraction (SD-LLLME) coupled with CE for the determination of two fluoroquinolones was developed. The method is capable to quantify trace amount of analytes in water samples and to improve the sensitivity of CE detection. For the SD-LLLME, a thin layer of organic phase was used to separate a drop of 0.1 M NaOH hanging at the inlet of the capillary from the aqueous donor phase. By this way, the analytes were extracted to the acceptor phase through the organic layer based on their acidic/basic dissociation equilibrium. The drop was immersed into the organic phase during 10 min for extraction and then it is directly injected into the capillary for the analysis. Parameters such as type and volume of organic solvent phase, aqueous donor, and acceptor phases and extraction time and temperature were optimized. The enrichment factor was calculated, resulting 40-fold for enrofloxacin (ENR) and sixfold for ciprofloxacin (CIP). The linear range were 20-400 µg/L for ENR and 60-400 µg/L for CIP. The detection limits were 10.1 µg/L and 55.3 µg/L for ENR and CIP, respectively, and a good reproducibility was obtained (4.4% for ENR and 5.6% for CIP). Two real water samples were analysed applying the new method and the obtained results presented satisfactory recovery percentages (90-100.3%).

Application of a fully integrated photodegradation-detection flow-batch analysis system with an on-line preconcentration step for the determination of metsulfuron methyl in water samples.

This work presents the development of a fully automated flow-batch analysis (FBA) system as a new approach for on-line preconcentration, photodegradation and fluorescence detection in a lab-constructed mixing chamber that was designed to perform these processes without sample dispersion. The system positions the mixing chamber into the detection system and varies the instrumental parameters according to the required photodegradation conditions. The developed FBA system is simple and easily coupled with any sample pretreatment without altering the configuration. This FBA system was implemented to photodegrade and determine the fluorescence of the degradation products of metsulfuron methyl (MSM), a naturally non-fluorescent herbicide of the sulfonylurea׳s family. An on-line solid phase extraction (SPE) and clean up procedure using a C18 minicolumn was coupled to the photodegradation-detection mixing chamber (PDMC) that was located in the spectrofluorometer. An enrichment factor of 27 was achieved. Photodegradation conditions have been optimized by considering the influence of the elution solvent on both the formation of the photoproduct and on the fluorescence signal. Under optimal conditions, the calibration for the MSM determination was linear over the range of 1.00-7.20 µg L(-1). The limit of detection (LOD) was 0.28 µg L(-1); the relative standard deviation was 2.0% and the sample throughput for the entire process was 3h(-1). The proposed method was applied to real water samples from the Bahía Blanca׳s agricultural region (Bahía Blanca, Buenos Aires, Argentina). This method obtained satisfactory recoveries with a range of 94.7-109.8%.

Determination of fluoroquinolones in bovine milk samples using a pipette-tip SPE step based on multiwalled carbon nanotubes prior to CE separation.

A simple CE-UV method was developed for the simultaneous determination of ciprofloxacin, norfloxacin, and ofloxacin in milk samples. The optimum separation was obtained using a 20 mM ammonium dihydrogenphosphate solution with 2 mM cetyltrimethylammonium bromide at pH 3.0 as the BGE. Satisfactory resolution for structurally very similar analytes, like norfloxacin and ciprofloxacin, was achieved without including any organic solvent. Milk samples were prepared using a simple/extraction procedure based on acidic protein precipitation followed by an SPE step using only 5 mg of multiwalled carbon nanotubes as the sorbent material. The LODs for the three compounds were between 7.5 and 11.6 µg/L and the RSDs for the peak areas were between 2.6 and 4.9%. The complete method was applied to spiked real milk samples with satisfactory recoveries for all analytes (84-106%).

Determination of sulfonylureas in cereal samples with electrophoretic method using ionic liquid with dispersed carbon nanotubes as electrophoretic buffer.

A capillary electrophoresis method to determine four sulfonylureas in grain samples was developed using 10mM of 1-butyl-3-methyl imidazolium tetrafluoroborate (bminBF4) as electrophoretic buffer solution. 2mgL(-1) of Surfactant Coated-Single Wall-Carbon Nanotubes (SC-SWCNTs) was added to the buffer solution to improve the resolution. In this way, the separation of nicosulfuron, ethoxysulfuron, sulfometuron methyl and chlorsulfuron was carried out in 16min without using organic solvents. A clean up-preconcentration procedure was done prior to inject the sample into the CE instrument, in order to achieve the established maximum residue limits (MRLs). So, the detection limits (LODs) for each analytes were between 16.8 and 26.6µgkg(-1). The relative standard deviations (RSDs) were in the range 1.9-6.7%. A recovery study using the so-called matrix matched calibration demonstrates that no matrix interferences were found throughout the determination. The recovery percentages were ranged between 80% and 113%.

Synthesis and characterization of hybrid-magnetic nanoparticles and their application for removal of arsenic from groundwater.

Multiwall carbon nanotubes (MWCNTs) were oxidized with different agents and a characterization study was carried out. Then, hybrid-magnetic nanoparticles (HMNPs) were synthesized as iron oxide supported on the selected multiwalled carbon nanotubes (MWCNTs-Fe3O4) obtained from MWCNTs oxidized with HNO3. The HMNPs characterization revealed the presence of iron oxide as magnetite onto the MWCNTs surfaces. These HMNPs were used for arsenic removal from groundwater. The adsorption process variables were optimized (concentration of NPs, contact time, and pH), and these systems could remove 39.93 mg As/g adsorbent. Therefore, these nanoparticles appear as a good alternative for removing arsenic from water samples.

Quantification of uncertainty in mercury wastewater analysis at different concentration levels and using information from proficiency test with a limited number of participants.

Measurement uncertainty is one of the most required parameters of analytical quality in environmental decision-making. Several approaches have been reported for estimating uncertainty in analytical measurements. The use of proficiency test (PT) is an alternative, not only for assessing the performance of individual analytical laboratories, but also for estimating the concordance of an analytical method and their measurement uncertainties. Here we develop a PT scheme for a limited number of analytical laboratories that took part in the analysis of total mercury in samples with complex matrix (chlor-alkali process wastewater effluent) in absence of references of the highest metrological hierarchy (e.g. primary method, primary CRM). Two in-house reference materials (IHRMs) were prepared at different levels of analyte concentration and the homogeneity required was verified for the intended use. A set of parametric and robust statistical tests were applied to evaluate the assigned values of each IHRM. Metrological compatibility assessment of PT results, evaluation of individual and global performance of the laboratories, and determination of uncertainty of the analytical measurements were evaluated in this restricted study scenario. Between-laboratory differences were found not significant (α=0.05). For both concentration levels we computed a relative standard uncertainty of 30% for the total Hg content.

Micellar nanotubes dispersed electrokinetic chromatography for the simultaneous determination of antibiotics in bovine milk.

A method to determine four antibiotics for veterinary use (ciprofloxacin, enrofloxacin, florfenicol, and chloramphenicol) of different families (fluoroquinolones and amphenicols) in bovine milk was developed. The determination of the analytes was carried out using micellar electrokinetic capillary chromatography (MEKC) with a common sodium borate-SDS buffer solution containing single-walled carbon nanotubes (SWCNTs). In this way, a great improvement in the electrophoretic resolution and the separation efficiency was achieved compared to MEKC. An online reverse electrode polarity-stacking mode (REPSM) was carried out to enhance sensitivity. This step was performed in only 2 min and it allowed a stacked percentage of 103. That means that all the amount of injected analytes is effectively stacked. When this stacking procedure was combined with an off-line preconcentration step, based on SPE, analytes could be detected in lower concentration than the established maximum residue limits (MRLs). The LODs for the four compounds were between 6.8 and 13.8 µg L(-1) and the RSD values were between 1.1% and 6.6%. The whole method was applied to spiked real samples with acceptable precision and satisfactory recoveries.

A simple and fast method for chlorsulfuron and metsulfuron methyl determination in water samples using multiwalled carbon nanotubes (MWCNTs) and capillary electrophoresis.

A new method to determine metsulfuron methyl (MSM) and chlorsulfuron (CS) in different water samples was developed. It consists in a solid phase extraction (SPE) procedure using multiwalled carbon nanotubes (MWCNTs) as sorbent material in combination with capillary zone electrophoretic determination. To carry out the pre-concentration step, a simple flow injection system was developed and optimized. Thus, 250 µL of aqueous solution containing methanol 50% (v/v) and acetonitrile 2% (v/v) as eluent, 10 mL of sample and a flow rate of 1.15 mL min(-1) were selected. The CE variables also were optimized. A rapid determination and good resolution of two herbicides were obtained within 9 min using a simple electrophoretic buffer (50 mmol L(-1) sodium tetraborate with 3% of methanol, pH=9.0). Under the optimum conditions, the calibration curves were linear between 0.5 and 6 µg L(-1) for MSM and CS with R(2)=0.995 and 0.997, respectively. The repeatability of the proposed method, expressed as relative standard deviation (RSD), varied between 4.1% and 5.4% (n=10) and the detection limits for MSM and CS were 0.40 and 0.36 µg L(-1), respectively. Good results were achieved when the proposed method was applied to spiked real water samples. The recoveries percentages of the two analytes were over the range 86-108%.

Simultaneous determination of hydroquinone, resorcinol, phenol, m-cresol and p-cresol in untreated air samples using spectrofluorimetry and a custom multiple linear regression-successive projection algorithm.

In this study, a novel, simple, and efficient spectrofluorimetric method to determine directly and simultaneously five phenolic compounds (hydroquinone, resorcinol, phenol, m-cresol and p-cresol) in air samples is presented. For this purpose, variable selection by the successive projections algorithm (SPA) is used in order to obtain simple multiple linear regression (MLR) models based on a small subset of wavelengths. For comparison, partial least square (PLS) regression is also employed in full-spectrum. The concentrations of the calibration matrix ranged from 0.02 to 0.2 mg L(-1) for hydroquinone, from 0.05 to 0.6 mg L(-1) for resorcinol, and from 0.05 to 0.4 mg L(-1) for phenol, m-cresol and p-cresol; incidentally, such ranges are in accordance with the Argentinean environmental legislation. To verify the accuracy of the proposed method a recovery study on real air samples of smoking environment was carried out with satisfactory results (94-104%). The advantage of the proposed method is that it requires only spectrofluorimetric measurements of samples and chemometric modeling for simultaneous determination of five phenols. With it, air is simply sampled and no pre-treatment sample is needed (i.e., separation steps and derivatization reagents are avoided) that means a great saving of time.

Successive projections algorithm applied to spectral data for the simultaneous determination of flavour enhancers.

A novel variable selection strategy for multiple lineal regression (MLR), the successive projections algorithm (SPA), was applied to spectrophotometric data (190-320 nm) for the simultaneous determination of monosodium glutamate (MSG), guanosine-5'-monophosphate (GMP) and inosine-5'-monophosphate (IMP) in dehydrated broths samples. This selection method uses simple operations in a vector space to minimize variable collinearity and has become an interesting variable selection strategy for multivariate calibration. In this work, nine, six and four wavelengths for MSG, GMP and IMP, respectively, were selected to construct calibrations models in order to solve successfully the serious spectral overlapping in samples containing these analytes. The relative errors of prediction (REP) for the validation set were 2.3%, 0.9% and 1.8% for MSG, GMP and IMP, respectively. Commercial samples were analysed and a recovery study was carried out to verify the accuracy of the proposed method with satisfactory results. A continuous flow system was used to develop a simple, cheap and rapid method (sample throughput: 200 h(-1)), without any previous extraction step.

A new automated approach to determine monosodium glutamate in dehydrated broths by using the flow-batch methodology.

The advantages of the flow-batch methodology were exploited to implement a simple system with nephelometric detection for the determination of monosodium glutamate (MSG) in food samples. The method is based on the inhibitory effect of the MSG over the crystallization of L-lysine in an isopropanol/acetone mixture. The calibration curve was prepared on-line. The method was linear over the range of 2.8 x 10(-3) to 1.1 x 10(-2)gL(-1) and a detection limit of 9.7 x 10(-5)gL(-1) was achieved. It was successfully applied to determine the MSG concentration in food samples, without a previous treatment. A recovery study was carried out on real samples and the percentages were between 98 and 106%.

Enzymatic reverse FIA method for total phenols determination in urine samples.

A reverse flow injection spectrophotometric enzymatic method is proposed to quantify total phenols in urine samples. The polyphenol oxidase (PPO; EC 1.14.18.1) obtained as a crude extract from sweet potato root (Ipomoea batatas) was used as enzymatic catalyze. The detection limit, the sample throughput and relative standard deviation were 7.7mgl(-1) of total phenols, 49h(-1) and 0.9%, respectively. The method was applied to real samples and a recovery study was carried out in order to its validation.

Determination of phenol, resorcinol and hydroquinone in air samples by synchronous fluorescence using partial least-squares (PLS).

The determination of phenolic compounds is of great importance owing to their high toxicity. Some of them are present in tobacco smoke and it is important for their monitoring in air of closed room. A simple, rapid and sensitive method was developed for simultaneous determination of hydroquinone, resorcinol and phenol in this kind of samples. Synchronous fluorescence technique was used and the data were processed by using the partial least-squares (PLS) chemometric algorithm. The concentrations for experimental calibration matrix were varied between 0.02 and 0.2 mg L(-1) for hydroquinone, between 0.05 and 0.6 mg L(-1) for resorcinol and between 0.05 and 0.4 mg L(-1) for phenol in accordance with the national legislation. The cross-validation method was used to select the number of factors. To check the accuracy of the proposed method a recovery study on real samples was carried out.

Flow injection analysis: Rayleigh light scattering technique for total protein determination.

A novel flow injection analysis (FIA) method with Rayleigh light scattering (RLS) detection was developed for the determination of total protein concentrations. This method is based on the weak intensity of RLS of bromothymol blue (BB) (3',3"-dibromothymolsulfonephthalein) which can be enhanced by the addition of protein in weakly acidic solution. A common spectrofluorimeter was used as a detector. It was proved that the application of this method to quantify the total proteins in real samples by using bovine serum albumin was possible. The RLS signal was detected at lambda(ex)= lambda(em)=572 nm. The linear range was 7.0-70.0 microg mL(-1), the detection limit was 3.75 microg mL(-1), the reproducibility was 5.5% (n=7), and the sample throughput was 26 h(-1).