Extremophiles in a changing world.

Extremophiles and their products have been a major focus of research interest for over 40 years. Through this period, studies of these organisms have contributed hugely to many aspects of the fundamental and applied sciences, and to wider and more philosophical issues such as the origins of life and astrobiology. Our understanding of the cellular adaptations to extreme conditions (such as acid, temperature, pressure and more), of the mechanisms underpinning the stability of macromolecules, and of the subtleties, complexities and limits of fundamental biochemical processes has been informed by research on extremophiles. Extremophiles have also contributed numerous products and processes to the many fields of biotechnology, from diagnostics to bioremediation. Yet, after 40 years of dedicated research, there remains much to be discovered in this field. Fortunately, extremophiles remain an active and vibrant area of research. In the third decade of the twenty-first century, with decreasing global resources and a steadily increasing human population, the world's attention has turned with increasing urgency to issues of sustainability. These global concerns were encapsulated and formalized by the United Nations with the adoption of the 2030 Agenda for Sustainable Development and the presentation of the seventeen Sustainable Development Goals (SDGs) in 2015. In the run-up to 2030, we consider the contributions that extremophiles have made, and will in the future make, to the SDGs.

Improving the 'tool box' for robust industrial enzymes.

The speed of sequencing of microbial genomes and metagenomes is providing an ever increasing resource for the identification of new robust biocatalysts with industrial applications for many different aspects of industrial biotechnology. Using 'natures catalysts' provides a sustainable approach to chemical synthesis of fine chemicals, general chemicals such as surfactants and new consumer-based materials such as biodegradable plastics. This provides a sustainable and 'green chemistry' route to chemical synthesis which generates no toxic waste and is environmentally friendly. In addition, enzymes can play important roles in other applications such as carbon dioxide capture, breakdown of food and other waste streams to provide a route to the concept of a 'circular economy' where nothing is wasted. The use of improved bioinformatic approaches and the development of new rapid enzyme activity screening methodology can provide an endless resource for new robust industrial biocatalysts.This mini-review will discuss several recent case studies where industrial enzymes of 'high priority' have been identified and characterised. It will highlight specific hydrolase enzymes and recent case studies which have been carried out within our group in Exeter.

The development and evaluation of a conducting matrix for the electrochemical regeneration of the immobilised co-factor NAD(H) under continuous flow.

Through the preparation of a novel controlled pore glass-poly(pyrrole) material we have developed a conducting support that is not only suitable for the co-immobilisation of enzymes and co-factors, but also enables the facile electrochemical regeneration of the co-factor during a reaction. Employing the selective reduction of (rac)-2-phenylpropionaldehyde to (S)-phenyl-1-propanol as a model, we have demonstrated the successful co-immobilisation of the HLADH enzyme and co-factor NAD(H); with incorporation of the material into a continuous flow reactor facilitating the in situ electrochemical regeneration of NAD(H) for in excess of 100 h. Using this approach we have developed a reagent-less, atom efficient system applicable to the cost-effective, continuous biosynthesis of chiral compounds.

Natural methods of protein stabilization: thermostable biocatalysts.

Enzymes that are naturally found in thermophilic and hyperthermophilic organisms are being used as robust biocatalysts in the fine chemical and pharmaceutical industries. They have important use in these industries due to their increased stability which is often required during commercial reaction conditions. The approach used in these studies is to learn how nature has managed to stabilize these proteins using a detailed knowledge of their biochemical properties and three-dimensional structures. This is illustrated with several different classes of enzyme that have been studied at Exeter. These include alcohol dehydrogenase, aminoacylase, pyroglutamyl carboxypeptidase, gamma-lactamase, dehalogenase and lysophospholipase.

Immobilization of thermophilic enzymes in miniaturized flow reactors.

The exploitation of enzymes for biotransformation reactions for the production of new and safer drug intermediates has been the focus of much research. While a number of enzymes are commercially available, their use in an industrial setting is often limited to reactions that are cost-effective and they are rarely investigated further. However, the development of miniaturized flow reactor technology has meant that the cost of such research, once considered cost- and time-inefficient, would be much less prohibitive. The use of miniaturized flow reactors for enzyme screening offers a number of advantages over batch enzyme assay systems. Since the assay is performed on a miniaturized scale, enzyme, substrate and cofactor quantities are significantly reduced, thus reducing the cost of laboratory-scale investigations. Since flow reactors use microfluidic systems, where the substrate and products flow out of the system, the problems of substrate inhibition and product inhibition encountered by some enzymes are avoided. Quite often, enzymes fulfil a single-use function in biotransformation processes; however, enzyme immobilization allows enzyme reuse and often helps to increase enzyme stability. We have used an aminoacylase enzyme with potential use for industrial biotransformation reactions and have successfully immobilized it in miniaturized flow reactors. This L-aminoacylase is from the thermophilic archaeon Thermococcus litoralis. Two approaches to enzyme immobilization have been examined, both involving enzyme cross-linking. The first reactor type has used monoliths, to which the enzyme was attached, and the second contained previously cross-linked enzyme trapped using frits, in the microfluidic channels. Two different microreactor designs were used in the investigation: microreactor chips for the monoliths and capillary flow reactors for the cross-linked enzyme. These systems allowed passage of the substrate and product through the system while retaining the aminoacylase enzyme performing the catalytic conversion. The enzyme has been successfully immobilized and used to produce stable biocatalytic microreactors that can be used repeatedly over a period of several months.

The dodecameric vanadium-dependent haloperoxidase from the marine algae Corallina officinalis: cloning, expression, and refolding of the recombinant enzyme.

The dodecameric vanadium-dependent bromoperoxidase from Corallina officinalis has been cloned and over-expressed in Escherichia coli. However, the enzyme was found to be predominantly in the form of inclusion bodies. This protein presents a challenging target for refolding, both due to the size (768kDa) and quaternary structure (12x64kDa). Successful refolding conditions have been established which result in an increase in the final yield of active bromoperoxidase from 0.5mg to 40mg per litre of culture. The refolded protein has been characterised and compared to the native enzyme and was shown to be stable at temperatures of 80 degrees C, over a pH range 5.5-10 and in organic solvents such as ethanol, acetonitrile, methanol, and acetone. The novel refolding approach reported in this paper opens up the full potential of this versatile enzyme for use in large scale biotransformation studies.

Hyperthermophilic dehydrogenase enzymes.

Archaeal dehydrogenases are often found to be of a specific class of dehydrogenase which has low sequence identity to the equivalent bacterial and eukaryotic counterparts. This paper focuses on two different types of hyperthermophilic dehydrogenase enzyme that have been cloned and over-expressed in Escherichia coli. The crystallographic structures of the apo form of GAPDH (glyceraldehyde-3-phosphate dehydrogenase) from Sulfolobus solfataricus and the related holo form of GAPDH from Methanothermus fervidus have been solved to high resolution. The zinc-containing structure of ADH (alcohol dehydrogenase) from Aeropyrum pernix has also been solved as a quaternary complex with the cofactor NADH and the inhibitor octanoic acid. The results show that despite the low sequence identity to the related enzymes found in other organisms the fold of the protein chain is similar. The archaeal GAPDH enzymes show a relocation of the active site which is a feature of evolutionary interest. The high thermostability of these three archaeal dehydrogenases can be attributed to a combination of factors including an increase in the number of salt bridges and hydrophobic interactions, a higher percentage of secondary structure and the presence of disulphide bonds.

Application of thermophilic enzymes in commercial biotransformation processes.

Biocatalysis is a useful tool in the provision of chiral technology and extremophilic enzymes are just one component in that toolbox. Their role is not always attributable to their extremophilic properties; as with any biocatalyst certain other criteria should be satisfied. Those requirements for a useful biocatalyst will be discussed including issues of selectivity, volume efficiency, security of supply, technology integration, intellectual property and regulatory compliance. Here we discuss the discovery and commercialization of an L-aminoacylase from Thermococcus litoralis, the product of a LINK project between Chirotech Technology and the University of Exeter. The enzyme was cloned into Escherichia coli to aid production via established mesophilic fermentation protocols. A simple downstream process was then developed to assist in the production of the enzyme as a genetically modified-organism-free reagent. The fermentation and downstream processes are operated at the 500 litre scale. Characterization of the enzyme demonstrated a substrate preference for N-benzoyl groups over N-acetyl groups. The operational parameters have been defined in part by substrate-concentration tolerances and also thermostability. Several examples of commercial biotransformations will be discussed including a process that is successful by virtue of the enzyme's thermotolerance.

The structure of human liver fructose-1,6-bisphosphate aldolase.

The X-ray crystallographic structure of the human liver isozyme of fructose-1,6-bisphosphate aldolase has been determined by molecular replacement using a tetramer of the human muscle isozyme as a search model. The liver aldolase (B isozyme) crystallized in space group C2, with unit-cell parameters a = 291.1, b = 489.8, c = 103.4 A, alpha = 90, beta = 103.6, gamma = 90 degrees. These large unit-cell parameters result from the presence of 18 subunits in the asymmetric unit: four catalytic tetramers and a dimer from a fifth tetramer positioned on the twofold crystallographic axis. This structure provides further insight into the factors affecting isozyme specificity. It reveals small differences in secondary structure that occur in regions previously determined to be isozyme specific. Two of these regions are at the solvent-exposed enzyme surface away from the active site of the enzyme. The most significant changes are in the flexible C-terminal region of the enzyme, where there is an insertion of an extra alpha-helix. Point mutations of the human liver aldolase are responsible for the disease hereditary fructose intolerance. Sequence information is projected onto the new crystal structure in order to indicate how these mutations bring about reduced enzyme activity and affect structural stability.

Chloroplast glyceraldehyde-3-phosphate dehydrogenase contains a single disulfide bond located in the C-terminal extension to the B subunit.

Mass mapping analysis based on cyanylation and CN-induced cleavage indicates that the two cysteine residues in the C-terminal extension of the B subunit of the light-activated pea leaf chloroplast glyceraldehyde-3-phosphate dehydrogenase form a disulfide bond. No evidence was found for a disulfide bond in the A subunit, nor was there any indication of a second disulfide bond in the B subunit. The availability of the structure of the extended glyceraldehyde-3-phosphate dehydrogenase from the archaeon Sulfolobus solfataricus allows modeling of the B subunit. As modeled, the two cysteine residues in the extension are positioned to form an interdomain disulfide cross-link.

Comparison of the decameric structure of peroxiredoxin-II by transmission electron microscopy and X-ray crystallography.

The decameric human erythrocyte protein torin is identical to the thiol-specific antioxidant protein-II (TSA-II), also termed peroxiredoxin-II (Prx-II). Single particle analysis from electron micrographs of Prx-II molecules homogeneously orientated across holes in the presence of a thin film of ammonium molybdate and trehalose has facilitated the production of a >/=20 A 3-D reconstruction by angular reconstitution that emphasises the D5 symmetry of the ring-like decamer. The X-ray structure for Prx-II was fitted into the transmission electron microscopic reconstruction by molecular replacement. The surface-rendered transmission electron microscopy (TEM) reconstruction correlates well with the solvent-excluded surface of the X-ray structure of the Prx-II molecule. This provides confirmation that transmission electron microscopy of negatively stained specimens, despite limited resolution, has the potential to reveal a valid representation of surface features of protein molecules. 2-D crystallisation of the Prx-II protein on mica as part of a TEM study resulted in the formation of a p2 crystal form with parallel linear arrays of stacked rings. This latter 2-D form correlates well with that observed from the 2.7 A X-ray structure of Prx-II solved from a new orthorhombic 3-D crystal form.

Enantioselectivity of recombinant Rhizomucor miehei lipase in the ring opening of oxazolin-5(4H)-ones.

Enantioselectivity of enzyme catalysis is often rationalized via active site models. These models are constructed on the basis of comparing the enantiomeric excess of product observed in a series of reactions which are conducted with a range of homologous substrates, typically carrying various side chain substitutions. Surprisingly the practical application of these simple but informative 'pocket size' models has been rarely tested in genetic engineering experiments. In this paper we report the construction, purification and enantioselectivity of two recombinant Rhizomucor miehei lipases which were designed to check the validity of such a model in reactions of ring opening of oxazolin-5(4H)-ones.

Crystallization and preliminary X-ray analysis of a gamma-lactamase.

An enzyme from Comomonas acidovorans has been isolated that is specific for the stereospecific hydrolysis of (+)gamma-lactam. This so-called (+)gamma-lactamase has important applications in biotransformation reactions. The enzyme has been crystallized by vapour-phase diffusion using polyethylene glycol 4000 as a precipitant. Addition of a detergent, beta-octylglucoside, was found to be essential for obtaining diffraction-quality crystals. The crystals grow in the space group P1, with unit-cell parameters a = 63.0, b = 93.2, c = 152.4 A, alpha = 104.3, beta = 92.6, gamma = 108.5 degrees, and diffract to 2 A resolution using synchrotron radiation. Native data from these crystals have been collected to 2.4 A.

Cloning, expression, and characterization of pyrrolidone carboxyl peptidase from the archaeon Thermococcus litoralis.

The gene encoding pyrrolidone carboxyl peptidase (Pcp) has been cloned from the hyperthermophilic archaeon Thermococcus litoralis. The recombinant enzyme has been expressed in Escherichia coli, purified, and characterized. The T. litoralis Pcp demonstrates strong sequence homology to previously characterized bacterial Pcps. Some investigations have been carried out on enzyme substrate specificity and stability.

Crystal structure of dodecameric vanadium-dependent bromoperoxidase from the red algae Corallina officinalis.

The three-dimensional structure of the vanadium bromoperoxidase protein from the marine red macroalgae Corallina officinalis has been determined by single isomorphous replacement at 2.3 A resolution. The enzyme subunit is made up of 595 amino acid residues folded into a single alpha+beta domain. There are 12 bromoperoxidase subunits, arranged with 23-point group symmetry. A cavity is formed by the N terminus of each subunit in the centre of the dodecamer. The subunit fold and dimer organisation of the Cor. officinalis vanadium bromoperoxidase are similar to those of the dimeric enzyme from the brown algae Ascophyllum nodosum, with which it shares 33 % sequence identity. The different oligomeric state of the two algal enzymes seems to reflect separate mechanisms of adaptation to harsh environmental conditions and/or to chemically active substrates and products. The residues involved in the vanadate binding are conserved between the two algal bromoperoxidases and the vanadium chloroperoxidase from the fungus Curvularia inaequalis. However, most of the other residues forming the active-site cavity are different in the three enzymes, which reflects differences in the substrate specificity and stereoselectivity of the reaction. A dimer of the Cor. officinalis enzyme partially superimposes with the two-domain monomer of the fungal enzyme.

Crystal structure of decameric 2-Cys peroxiredoxin from human erythrocytes at 1.7 A resolution.

BACKGROUND: The peroxiredoxins (Prxs) are an emerging family of multifunctional enzymes that exhibit peroxidase activity in vitro, and in vivo participate in a range of cellular processes known to be sensitive to reactive oxygen species. Thioredoxin peroxidase B (TPx-B), a 2-Cys type II Prx from erythrocytes, promotes potassium efflux and down-regulates apoptosis and the recruitment of monocytes by endothelial tissue. RESULTS: The crystal structure of human decameric TPx-B purified from erythrocytes has been determined to 1.7 [corrected)] A resolution. The structure is a toroid comprising five dimers linked end-on through predominantly hydrophobic interactions, and is proposed to represent an intermediate in the in vivo reaction cycle. In the crystal structure, Cys51, the site of peroxide reduction, is oxidised to cysteine sulphinic acid. The residue Cys172, lies approximately 10 A away from Cys51 [corrected]. CONCLUSIONS: The oxidation of Cys51 appears to have trapped the structure into a stable decamer, as confirmed by sedimentation analysis. A comparison with two previously reported dimeric Prx structures reveals that the catalytic cycle of 2-Cys Prx requires significant conformational changes that include the unwinding of the active-site helix and the movement of four loops. It is proposed that the stable decamer forms in vivo under conditions of oxidative stress. Similar decameric structures of TPx-B have been observed by electron microscopy, which show the protein associated with the erythrocyte membrane.

The crystal structure of d-glyceraldehyde-3-phosphate dehydrogenase from the hyperthermophilic archaeon Methanothermus fervidus in the presence of NADP(+) at 2.1 A resolution.

The crystal structure of the glyceraldehyde-3-phosphate dehydrogenase (GAPDH) from the archaeon Methanothermus fervidus has been solved in the holo form at 2.1 A resolution by molecular replacement. Unlike bacterial and eukaryotic homologous enzymes which are strictly NAD(+)-dependent, GAPDH from this organism exhibits a dual-cofactor specificity, with a marked preference for NADP(+) over NAD(+). The present structure is the first archaeal GAPDH crystallized with NADP(+). GAPDH from M. fervidus adopts a homotetrameric quaternary structure which is topologically similar to that observed for its bacterial and eukaryotic counterparts. Within the cofactor-binding site, the positively charged side-chain of Lys33 decisively contributes to NADP(+) recognition through a tight electrostatic interaction with the adenosine 2'-phosphate group. Like other GAPDHs, GAPDH from archaeal sources binds the nicotinamide moiety of NADP(+) in a syn conformation with respect to the adjacent ribose and so belongs to the B-stereospecific class of oxidoreductases. Stabilization of the syn conformation is principally achieved through hydrogen bonding of the carboxamide group with the side-chain of Asp171, a structural feature clearly different from what is observed in all presently known GAPDHs from bacteria and eukaryotes. Within the catalytic site, the reported crystal structure definitively confirms the essential role previously assigned to Cys140 by site-directed mutagenesis studies. In conjunction with new mutation results reported in this paper, inspection of the crystal structure gives reliable evidence for the direct implication of the side-chain of His219 in the catalytic mechanism. M. fervidus grows optimally at 84 degrees C with a maximal growth temperature of 97 degrees C. The paper includes a detailed comparison of the present structure with four other homologous enzymes extracted from mesophilic as well as thermophilic organisms. Among the various phenomena related to protein thermostabilization, reinforcement of electrostatic and hydrophobic interactions as well as a more efficient molecular packing appear to be essentially promoted by the occurrence of two additional alpha-helices in the archaeal GAPDHs. The first one, named alpha4, is located in the catalytic domain and participates in the enzyme architecture at the quaternary structural level. The second one, named alphaJ, occurs at the C terminus and contributes to the molecular packing within each monomer by filling a peripherical pocket in the tetrameric assembly.