Optimizing the Microenvironment in Solid Polymer Electrolytes by Anion Vacancy Coupled with Carbon Dots.

The practical application of solid polymer electrolyte is hindered by the small transference number of Li+, low ionic conductivity and poor interfacial stability, which are seriously determined by the microenvironment in polymer electrolyte. The introduction of functional fillers is an effective solution to these problems. In this work, based on density functional theory (DFT) calculations, it is demonstrated that the anion vacancy of filler can anchor anions of lithium salt, thereby significantly increasing the transference number of Li+ in the electrolyte. Therefore, flower-like SnS2-based filler with abundant sulfur vacancies is prepared under the regulation of functionalized carbon dots (CDs). It is worth mentioning that the CDs dotted on the surface of SnS2 have rich organic functional groups, which can serve as the bridging agent to enhance the compatibility of filler and polymer, leading to superior mechanical performance and fast ion transport pathway. Additionally, the in-situ formed Li2S/Li3N at the interface of Li metal and electrolyte facilitate the fast Li+ diffusion and uniform Li deposition, effectively mitigating the growth of lithium dendrites. As a result, the assembled lithium metal batteries exhibit excellent cycling stability, reflecting the superiority of the carbon dots derived vacancy-rich inorganic filler modification strategy.

Approaching Splendid Catalysts for Li-CO2 Battery from the Theory to Practical Designing: A Review.

Lithium carbon dioxide (Li-CO2) batteries, noted for their high discharge voltage of approximately 2.8 V and substantial theoretical specific energy of 1876 Wh kg-1, represent a promising avenue for new energy sources and CO2 emission reduction. However, the practical application of these batteries faces significant hurdles, particularly at high current densities and over extended cycle lives, due to their complex reaction mechanisms and slow kinetics. This paper delves into the recent advancements in cathode catalysts for Li-CO2 batteries, with a specific focus on the designing philosophy from composition, geometry, and homogeneity of the catalysts to the proper test conditions and real-world application. It surveys the possible catalytic mechanisms, giving readers a brief introduction of how the energy is stored and released as well as the critical exploration of the relationship between material properties and performances. Specifically, optimization and standardization of test conditions for Li-CO2 battery research is highlighted to enhance data comparability, which is also critical to facilitate the practical application of Li-CO2 batteries. This review aims to bring up inspiration from previous work to advance the design of more effective and sustainable cathode catalysts, tailored to meet the practical demands of Li-CO2 batteries.

Trace Fluorinated Carbon Dots Driven Li-Garnet Solid-State Batteries.

Garnet solid-state electrolyte Li6.5La3Zr1.5Ta0.5O12 (LLZTO) holds significant promise. However, the practical utilization has been seriously impeded by the poor contact of Li|garnet and electron leakage. Herein, one new type of garnet-based solid-state battery is proposed with high performance through the disparity in interfacial energy, induced by the reaction between trace fluorinated carbon dots (FCDs) and Li. The work of adhesion of Li|garnet is increased by the acquired Li-FCD composite, which facilitates an intimate Li|garnet interface with the promoted uniform Li+ deposition, revealed by density functional theory (DFT) calculations. It is further validated that a concentrated C-Li2O-LiF component at the Li|garnet interface is spontaneously constructed, due to the significant disparity in interfacial energy between C-Li2O-LiF|LLZTO and C-Li2O-LiF|Li. Furthermore, The electron transport and Li dendrites penetration are effectively hindered by the formed Li2O and LiF. The Li-FCD|LLZTO|Li-FCD symmetrical cells demonstrate stable cycling performance for over 3000 hours at 0.3 mA cm-2 and 800 hours at 0.5 mA cm-2. Furthermore, the LFP|garnet|Li-FCD full cell exhibits remarkable cycling performance (91.6 % capacity retention after 500 cycles at 1 C). Our research has revealed a novel approach to establish a dendrite-free Li|garnet interface, laying the groundwork for future advancements in garnet-based solid-state batteries.

Uncovering the Effect of A-Site Cations on Localized Excitons Photoluminescence of Manganese-Doped Zinc Chloride Nanocrystals.

Elucidating the key factors that affect the localized excitons (LEs) photoluminescence (PL) in lead-free metal halide nanocrystals (NCs) is important for their optoelectronic applications. However, the effect of A-site cations on LEs based PL is not well understood. Herein, we varied the A-site cation ratio (Rb/Cs) to investigate the influence on LEs based PL in manganese-doped zinc chloride NCs. Through time-resolved photoluminescence (TR-PL) spectra and density functional theory (DFT) calculations, we discovered that Cl vacancy is energetically more favorable in Mn2+-doped Rb3ZnCl5 NCs compared to Mn2+-doped Cs3ZnCl5 NCs. The higher concentration of Cl vacancy increases the nonradiative recombination process in Rb3ZnCl5:Mn2+ NCs, ultimately determining the PL efficiency. This research enhances the understanding of the A-site cation effect on LEs-based PL in lead-free metal halide NCs.

Pan-cancer analysis of the prognostic and immunological role of FKBP4.

Objectives: Our previous studies revealed the significant roles of FK506-binding protein 4 (FKBP4) in tumorigenesis, however, there has been no pan-cancer analysis of FKBP4. Using bioinformatics, the current study reported the expression and prognostic role of FKBP4, and the correlation between FKBP4 and clinicopathological parameters, methylation, molecular network, immunological traits and drug sensitivity. Methods: RNA sequencing data, somatic mutation, and related clinical information were obtained from TCGA using UCSC Xena. The association between FKBP4 expression and clinical features was assessed using TISIDB. The relationships between FKBP4 expression and tumour stage, OS, DSS, DFS, and PFS were analysed using univariate cox regression analysis. The radar plots for TMB and MSI were obtained using "Fmsb" R package. UALCAN was used to explore the effect of FKBP4 methylation on tumour and normal samples. CBioportal was used to analyse copy number mutations in FKBP4 Gene expression and drug sensitivity data were downloaded from the CellMiner database. GO analysis was performed for the high and the low expression of FKBP4 compared with the median level of FKBP4 using clusterProfiler4.0. Results: FKBP4 expression is significantly upregulated in various types of cancers. Cox regression analysis showed that high FKBP4 levels were correlated with poor OS, DSS, DFS, and PFS in most patients with cancer. Methylation of FKBP4 DNA was upregulated in most cancers, and FKBP4 expression is positively associated with transmethylase expression. FKBP4 and its copy were significantly associated with the expression of immune-infiltrating cells, immune checkpoint genes, immune modulators, TMB, MMR, and MSI. FKBP4 expression levels significantly correlated with 16 different drug sensitivities (all p < 0.05). Conclusions: Our pan-cancer bioinformatic analysis revealed a potential mechanism underlying the effects of FKBP4 on the prognosis and progression of various cancers.

Polymeric Metal Halides with Bright Luminescence and Versatile Processability.

Most of current metal halide materials, including all inorganic and organic-inorganic hybrids, are crystalline materials with poor workability and plasticity that limit their application scope. Here, we develop a novel class of materials termed polymeric metal halides (PMHs) through introducing polycations into antimony-based metal halide materials as A-site cations. A series of PMHs with orange-yellow broadband emission and large Stokes shift originating from inorganic self-trapped excitons are successfully prepared, which meanwhile exhibit the excellent processability and formability of polymers. The versatility of these PMHs is manifested as the broad choices of polycations, the ready extension to manganese- and copper-based halides, and the tolerance to molar ratios between polycations and metal halides in the formation of PMHs. The merger of polymer chemistry and inorganic chemistry thus provides a novel generic platform for the development of metal halide functional materials.