ABSTRACT
Constructing heterostructures from already synthesized two-dimensional materials is of significant importance. We performed a first-principles study to investigate the electronic properties and interfacial characteristics of Janus MoSH/WSi2N4 van der Waals heterostructure (vdWH) contacts. We demonstrate that the p-type Schottky formed by MoSH/WSi2N4 and MoHS/WSi2N4 has extremely low Schottky barrier heights (SBHs). Due to its excellent charge injection efficiency, Janus MoSH may be regarded as an effective metal contact for WSi2N4 semiconductors. Furthermore, the interfacial characteristics and electronic structure of Janus MoSH/WSi2N4 vdWHs can not only reduce/eliminate SBH, but also forms the transition from p-ShC to n-ShC type and from Schottky contact (ShC) to Ohmic contact (OhC) through the layer spacing and electric field. Our results can offer a fresh method for optoelectronic applications based on metal/semiconductor Janus MoSH/WSi2N4 vdW heterostructures, which have strong potential in optoelectronic applications.
ABSTRACT
Melatonin treatment was investigated for the sensory quality and senescence in postharvest cattails (Typha latifolia L.) during cold storage. The 0.75 mM melatonin treatment reduced surface browning and delaying lignification of Cattails stored at 4 °C. The results showed that melatonin treatment slowed weight loss and firmness, maintained sensory quality and reducing sugar content. Melatonin treatment reduced browning by inhibiting the increase of MDA and H2O2 contents and POD activity. Melatonin treatment maintained high non-enzymatic antioxidant components (Vitamin C and total phenolic content) and antioxidant enzyme activities (SOD, CAT, and APX), thereby alleviating the browning and senescence of postharvest cattails. These findings indicate that melatonin treatment can maintain postharvest cattails quality.
ABSTRACT
Overcoming the negative impact of residual ionic liquids (ILs) on perovskite films based on an in-depth understanding of chemical interactions between ionic liquids and preparing perovskite precursor solutions is a great challenge when aiming to simultaneously achieve long-term stability and high efficiency within IL-based perovskite solar cells (PSCs). Herein, 1-butyl-3-methylimidazolium tetrafluoroborate (BMIMBF4), a type of IL, was introduced into the perovskite precursor solution, and carbon quantum dots (CQDs) were further introduced into the antisolvent to enhance the photovoltaic properties of PSCs. Both ILs and CQDs synergistically manipulate the crystallization process and passivate defects to obtain high-quality perovskite films. Besides serving as passivation sites to strengthen the collaboration between additives and perovskite materials, the cointroduction of CQDs further promotes the carrier transport process since it not only provides carrier channels at grain boundaries but also forms better energy alignment, which effectively overcomes the charge transfer loss caused by the steric hindrance of ILs. Based on such a synergistic effect of ILs and CQDs, the n-i-p MAPbI3-based PSCs achieve the highest efficiency of 20.84% with improved stability. This simple and low-cost synergistic integration method will subsequently provide direction for optimizing ILs to improve the photovoltaic performance of PSCs.
ABSTRACT
The smooth and dense light-absorbing layer is an essential factor in polycrystalline solar cells to achieve high photovoltaic performance, while it remains challenging in perovskite solar cells because of the difficulty balancing the speed of crystal nucleation and growth in a solution way. Here, we explored a perovskite nucleation/growth compatible model via manipulating the intermediate complex induced by n-hexylamine (NHA) molecule, guiding us to adjustments perovskite nucleation and growth process. We found that the NHA can act as a gearbox-like molecule to sequentially reduce the perovskite nucleation barrier, promote the nucleation velocity, and retard the perovskite growth simultaneously to obtain uniform perovskite films; correspondingly, this modulation also yields the buried interface with fewer voids and low defects density. In addition, the hydrophobic NHA with long alkyl chain improves the moisture tolerance of the perovskite. The treated solar cell power conversion efficiency was 21.91 %. Importantly, in â¼ 70 % humidity at 25 °C for 30 days, the efficiency of the device declined less than 5 %, exhibiting a good stability performance.
ABSTRACT
The attainment of a well-crystallized photo-absorbing layer with minimal defects is crucial for achieving high photovoltaic performance in polycrystalline solar cells. However, in the case of perovskite solar cells (PSCs), precise control over crystallization and elemental distribution through solution processing remains a challenge. In this study, we propose the use of a multifunctional molecule, α-amino-γ-butyrolactone (ABL), as a modulator to simultaneously enhance crystallization and passivate defects, thereby improving film quality and deactivating nonradiative recombination centers in the perovskite absorber. The Lewis base groups present in ABL facilitate nucleation, leading to enhanced crystallinity, while also retarding crystallization. Additionally, ABL effectively passivates Pb2+ dangling bonds, which are major deep-level defects in perovskite films. This passivation process reduces recombination losses, promotes carrier transfer and extraction, and further improves efficiency. Consequently, the PSCs incorporating the ABL additive exhibit an increase in conversion efficiency from 18.30% to 20.36%, along with improved long-term environmental stability. We believe that this research will contribute to the design of additive molecular structures and the engineering of components in perovskite precursor colloids.
ABSTRACT
As one of the most important wheat-producing areas in China, wheat is prone to heat stress during the grain filling period in the Huang-Huai-Hai Plain (3HP), which lowers yields and degrades the grain quality of wheat. To assess the effects of spraying potassium dihydrogen phosphate (KH2PO4) on the physiological traits in flag leaves and grain yield (GY) and quality under heat stress during the filling period, we conducted a two-year field experiment in the winter wheat growing seasons of 2020-2022. In this study, spraying water combined with heat stress (HT), 0.3% KH2PO4 (KDP), and 0.3% KH2PO4 combined with heat stress (PHT) were designed, and spraying water alone was used as a control (CK). The dates for the spraying were the third and eleventh day after anthesis, and a plastic film shed was used to impose heat stress on the wheat plants during the grain filling period. The results showed that spraying KH2PO4 significantly improved the chlorophyll content and net photosynthesis rate (Pn) in flag leaves compared with the non-sprayed treatments. Compared with CK, the Pn in HT decreased by 8.97% after heat stress, while Pn in PHT decreased by 7.44% compared to that of KDP. The activities of superoxide dismutase, catalase, and peroxidase in flag leaves were significantly reduced when the wheat was subjected to heat stress, while malonaldehyde content increased, and the enzyme activities were significantly enhanced when KH2PO4 was sprayed. Heat stress significantly decreased the contribution rate of dry matter accumulation (DM) after anthesis of wheat to grain (CRAA), whereas spraying KH2PO4 significantly increased the CRAA and harvest index. At maturity, the DM in CK was significantly higher than that in HT, KDP was significantly higher than PHT, and KDP had the highest DM. Compared with CK, the GY in KDP significantly increased by 9.85% over the two years, while the GY in HT decreased by 11.44% compared with that of CK, and the GY in PHT decreased by 6.31% compared to that of KDP. Spraying KH2PO4 after anthesis primarily helped GY by maintaining a high thousand grain weight to lessen the negative effects of heat stress on wheat. Moreover, heat stress significantly reduced protein concentration, wet gluten content, dough development time, and hardness index in grains of mature, while spraying KH2PO4 maintained a sufficient grain quality under the conditions of achieving higher yields. Overall, spraying KH2PO4 after anthesis could enhance the heat stress resistance of wheat and maintain the photosynthetic capacity of flag leaves, ensuring the dry matter production and reducing the negative effects on grain yield and quality in the 3HP.
ABSTRACT
A one-pot hydrothermal synthesis of Fe-doped MoS2 nanoflowers (Fe-MoS2 NFs) has been developed as a surface-enhanced Raman spectroscopy (SERS) substrate. The Fe-MoS2 NFs display high reproducibility, stability, and recyclability, which is beneficial for the development of the sustainable ecological environment. The SERS substrate provides a high enhancement factor of 105, which can be ascribed to the inducing defects by doping Fe that can improve the charge transfer between probe molecules and MoS2. The Fe-MoS2 NFs have been used to detect bilirubin in serum. The Fe-MoS2 NF SERS substrate exhibits a linear detection range from 10-3 to 10-9 M with a low limit of detection (LOD) of 10-8 M. The substrate displays an excellent selectivity to bilirubin in the presence of other potentially interfering molecules (dextrose and phosphate). These results provide a novel concept to synthesize ultra-sensitive SERS substrates and open up a wide range of possibilities for new applications of MoS2 in clinical diagnosis.
Subject(s)
Metal Nanoparticles , Molybdenum , Molybdenum/chemistry , Bilirubin , Reproducibility of Results , Metal Nanoparticles/chemistry , Spectrum Analysis, Raman/methodsABSTRACT
Surface-enhanced Raman scattering (SERS) is an analytical technique for the rapid detection of low-concentration analytes. However, the lack of uniform, stable, and recyclable substrate limits its wide applications. Here, Ag-doped MoS2 (AMSx) was prepared by the hydrothermal method. Band structures, LSV, and EIS characteristics confirmed that Ag doping can reduce the indirect band gap and increase the charge transfer between substrates and molecules. As a SERS substrate, AMSx displays excellent reproducibility, stability, and recyclability, which is beneficial for the application of the SERS substrate. Meanwhile, AMSx has excellent sensitivity with an enhancement factor of 4.07 × 106, comparable to that of precious metals. In addition, AMSx exhibits ultrahigh sensitivity in sensing bilirubin and Bisphenol A (BPA); the corresponding detection limit of both is 10-9 M, also better than that of previously reported semiconductors. This work provided a novel idea to synthesize low-cost ultrasensitive SERS substrates and the strategy of improving metal-chalcogenide semiconductor sensing.
ABSTRACT
Acute myeloid leukemia (AML) is a common hematopoietic disorder. Many circular RNAs (circRNAs) are abnormally expressed in AML, including hsa_circ_0035381 (circ_0035381). Nevertheless, the function and mechanism of circ_0035381 in AML remain mostly unclear. Expression of circ_0035381 was determined by qRT-PCR. The impacts of circ_0035381 on AML cell proliferation, apoptosis, and mitochondrial damage were validated via performing loss-of-function experiments. Targeting relationship was predicted by bioinformatics analysis and verified via dual-luciferase reporter and RNA immunoprecipitation assays. Circ_0035381 was upregulated in AML bone marrow samples and cells. Circ_0035381 downregulation decreased AML cell growth in nude mice and restrained AML cell proliferation and contributed to AML apoptosis and mitochondrial damage in vitro. Circ_0035381 acted as a miR-582-3p sponge, and miR-582-3p downregulation mitigated the impacts of circ_0035381 interference on AML cell proliferation, apoptosis, and mitochondrial damage. MiR-582-3p targeted Tyrosine3-monooxygenase/tryptophan5-monooxygenase activation protein zeta (YWHAZ), and it restrained AML cell proliferation and facilitated AML cell apoptosis and mitochondrial damage by decreasing YWHAZ expression. Notably, circ_0035381 regulated YWHAZ expression via miR-582-3p. Circ_0035381 knockdown repressed cell proliferation and promoted cell apoptosis and mitochondrial damage via regulating the miR-582-3p/YWHAZ axis in AML.
Subject(s)
Leukemia, Myeloid, Acute , MicroRNAs , Animals , Mice , Mice, Nude , Apoptosis , Cell Proliferation , Leukemia, Myeloid, Acute/genetics , Mixed Function Oxygenases , MicroRNAs/genetics , Cell Line, TumorABSTRACT
As a typical representative of endocrine-disrupting chemicals (EDCs), bisphenol A (BPA) is a common persistent organic pollutant in the environment that can induce various diseases even at low concentrations. Herein, the magnetic Fe3O4-Au@Ag@(Au@Ag) nanocomposites (CSSN NCs) have been prepared by self-assembly method and applied for ultra-sensitive surface-enhanced resonance Raman scattering (SERRS) detection of BPA. A simple and rapid coupling reaction of Pauly's reagents and BPA not only solved the problem of poor affinity between BPA and noble metals, but also provided the SERRS activity of BPA azo products. The distribution of hot spots and the influence of incremental introduction of noble metals on the performance of SERRS were analyzed by a finite-difference time-domain (FDTD) algorithm. The abundance of hot spots generated by core-shell-satellite structure and outstanding SERRS performance of Au@Ag nanocrystals were responsible for excellent SERRS sensitivity of CSSN NCs in the results. The limit of detection (LOD) of CSSN NCs for BPA azo products was as low as 10-10 M. In addition, the saturation magnetization (Ms) value of CSSN NCs was 53.6 emu·g-1, which could be rapidly enriched and collected under the condition of external magnetic field. These magnetic core-shell-satellite NCs provide inspiration idea for the tailored design of ultra-sensitive SERRS substrates, and thus exhibit limitless application prospects in terms of pollutant detection, environmental monitoring, and food safety.
ABSTRACT
BACKGROUND: Green-fleshed radish (Raphanus sativus L.) is an economically important root vegetable of the Brassicaceae family, and chlorophyll accumulates in its root tissues. It was reported that the basic helix-loop-helix (bHLH) transcription factors play vital roles in the process of chlorophyll metabolism. Nevertheless, a comprehensive study on the bHLH gene family has not been performed in Raphanus sativus L. RESULTS: In this study, a total of 213 Raphanus sativus L. bHLH (RsbHLH) genes were screened in the radish genome, which were grouped into 22 subfamilies. 204 RsbHLH genes were unevenly distributed on nine chromosomes, and nine RsbHLH genes were located on the scaffolds. Gene structure analysis showed that 25 RsbHLH genes were intron-less. Collineation analysis revealed the syntenic orthologous bHLH gene pairs between radish and Arabidopsis thaliana/Brassica rapa/Brassica oleracea. 162 RsbHLH genes were duplicated and retained from the whole genome duplication event, indicating that the whole genome duplication contributed to the expansion of the RsbHLH gene family. RNA-seq results revealed that RsbHLH genes had a variety of expression patterns at five development stages of green-fleshed radish and white-fleshed radish. In addition, the weighted gene co-expression network analysis confirmed four RsbHLH genes closely related to chlorophyll content. CONCLUSIONS: A total of 213 RsbHLH genes were identified, and we systematically analyzed their gene structure, evolutionary and collineation relationships, conserved motifs, gene duplication, cis-regulatory elements and expression patterns. Finally, four bHLH genes closely involved in chlorophyll content were identified, which may be associated with the photosynthesis of the green-fleshed radish. The current study would provide valuable information for further functional exploration of RsbHLH genes, and facilitate clarifying the molecular mechanism underlying photosynthesis process in green-fleshed radish.
Subject(s)
Arabidopsis , Raphanus , Arabidopsis/genetics , Chlorophyll , Evolution, Molecular , Gene Expression Regulation, Plant , Genome, Plant , Phylogeny , Raphanus/geneticsABSTRACT
Polycyclic aromatic hydrocarbons (PAHs) with carcinogenic, teratogenic and mutagenic properties are persistent organic pollutants in the environment. Herein, the novel multifunctional Fe3O4/Cu2O-Ag nanocomposites (NCs) have been established for ultra-sensitive surface-enhanced Raman scattering (SERS) detection and visible light-driven photocatalytic degradation of PAHs. Fe3O4/Cu2O-Ag NCs with different amounts of Ag nanocrystals were synthesized, and the effect of Ag contents on SERS performance was studied by finite-difference time-domain (FDTD) algorithm. The synergistic interplay of electromagnetic and chemical enhancement was responsible for excellent SERS sensitivity of Fe3O4/Cu2O-Ag NCs. The limit of detection (LOD) of optimal SERS substrates (FCA-2 NCs) for Nap, BaP, Pyr and Ant was as low as 10-9, 10-9, 10-9 and 10-10 M, respectively. The SERS detection of PAHs in actual soil environment was also studied. Moreover, a simple SERS method was used to monitor the photocatalytic process of PAHs. The recovery and reuse of Fe3O4/Cu2O-Ag NCs were achieved through magnetic field, and the outstanding SERS and photocatalytic performance were still maintained even after eight cycles. This magnetic multifunctional NCs provide a unique idea for the integration of ultra-sensitive SERS detection and efficient photocatalytic degradation of PAHs, and thus will have more hopeful prospects in the field of environmental protection.
Subject(s)
Nanocomposites , Polycyclic Aromatic Hydrocarbons , Light , Nanocomposites/chemistry , Persistent Organic Pollutants , Soil , Silver/chemistryABSTRACT
To compensate for the photoelectric losses of planar heterojunction perovskite solar cells (PSCs), the development of high-quality textured absorbers with excellent light-harvesting ability and carrier extraction/transfer efficiency is of great significance to achieve a high-efficiency stable photovoltaic output. In this paper, we propose an in situ growth passivation technique to construct high-performance textured absorbers by adding a 2-amino-4-chlorophenol (AC) modifier consisting of multiple groups during the growth of textured perovskite. Initially, according to the Ostwald ripening mechanism, the strongly polar dimethylformamide (DMF) was used as the etchant to systematically study its synergistic effect on the morphology evolution, crystallization kinetics, light-trapping capability, and photovoltaic loss of textured absorbers. An appropriate amount of DMF induces formamidinium cations (FA+) to replace methylammonium cations (MA+) in the perovskite lattice while etching the absorber to form a texture configuration, which effectively broadens the spectral absorption range, thus greatly improving the light-trapping capacity and short-circuit current density of planar PSCs. In contrast, excess DMF deteriorates the device performance due to the excessive corrosion of the perovskite. Moreover, the introduction of the AC modifier is of great significance for passivating deep-level defects and accelerating the charge extraction/transfer. Owing to the electron-donating nature of the Lewis base, the hydroxyl groups with a higher electron density in AC molecules can better coordinate with Pb2+ ion defects, which effectively improves the crystallinity of the textured perovskite, thus suppressing the nonradiative recombination and ultimately improving the photovoltaic outputs of modified devices, particularly the fill factor and the open-circuit voltage. Thus, the photovoltaic performance of the AC-modified planar PSC is significantly better than that of the conventional textured device, with a reverse efficiency of 21.18% and forward efficiency of 20.77%. Owing to the synergistic effect of (1) the superior optical properties of the textured perovskite induced by DMF and (2) excellent charge dynamics driven by AC, the functionalized devices without encapsulation also exhibited good photovoltaic output stability and reproducibility. This work provides novel insights into the growth mechanism of textured absorbers and paves the way for more efficient and stable planar PSCs.
ABSTRACT
Real-time and in-situ monitoring of chemical reactions has attracted great attention in many fields. In this work, we in-situ monitored the photodegradation reaction process of methylene blue (MB) by Surface enhanced Raman scattering (SERS) technique. An effective and versatile SERS platform assembled from MoS2 nanoflowers (NFs) and TiO2 nanoparticles (NPs) was prepared successfully. The optimized MoS2/TiO2 substrate (MTi20) exhibits not only an ultra-high SERS response but also the excellent catalytic degradation performance to the contaminant MB, which provided a new material for real-time and in-situ monitoring the photodegradation process. Experiments prove that the detection limit is as low as 10-13 M, and degradation rate is as high as 97.2% in 180 s, respectively. And the activity of the substrate kept in the air for 90 days is almost unchanged. Furthermore, as a practical SERS substrate, MTi20 can also detect trace amounts of other harmful substances including malachite green (MG), bisphenol A (BPA) and endosulfan. Thus, this study come up with a new orientation at the real-time and in-situ monitoring of photocatalytic reaction and may be applied in environmental monitoring and food security fields in the future.
ABSTRACT
Emerging technologies in the field of environmental remediation are becoming increasingly significant owing to the increasing demand for eliminating significant amounts of pollution in water, soil, and air. We designed and synthesized MoS2/Fe2O3 heterojunction nanocomposites (NCs) as multifunctional materials that are easily separated and reused. The trace detection performance of the prepared sample was examined using bisphenol A (BPA) as the probe molecule, with limits of detection as low as 10-9 M; this detection limit is the lowest among all reported semiconductor substrates. BPA was subjected to rapid photocatalytic degradation by MoS2/Fe2O3 NCs under ultraviolet irradiation. The highly recyclable MoS2/Fe2O3 NCs exhibited photo-Fenton catalytic activity for BPA and good detection ability when reused as a surface-enhanced Raman scattering (SERS) substrate after catalysis. The SERS and photocatalysis mechanisms were proposed while considering the effects of the Z-scheme charge-transfer paths, three-dimensional flower-like structures, and dipole-dipole coupling. Moreover, the prepared MoS2/Fe2O3 NCs were successfully applied in the detection of BPA in real lake water and milk samples. Herein, we present insights into the development of MoS2/Fe2O3 materials, which can be used as multifunctional materials in chemical sensors and in photocatalytic wastewater treatments for the removal of recalcitrant organic pollutants.
ABSTRACT
Chlorobenzene and diethyl ether were chosen as an antisolvent to control the crystallization of CH3NH3PbI3. Under the condition of similar crystallization for both perovskite films, the obvious larger short-circuit current density for CH3NH3PbI3 film treated by chlorobenzene prompted us to unveil the roles of chlorobenzene in the perovskite films via adjusting the dropping amount of chlorobenzene. A novel insight of chlorobenzene function was revealed, that is, gradient diluted chlorine doping in the CH3NH3PbI3 film, which forms a gradient band gap in the perovskite films, prompts photogenerated carriers accumulating at the interface, makes the electron transport faster, and effectively enhances the power conversion efficiency (PCE) of solar cells. The maximum PCE of 20.58% has been achieved under standard AM1.5 conditions. Moreover, this technique exhibits very high reproducibility, and 20 devices fabricated in one batch can yield an average PCE of 20.31%.
ABSTRACT
Representing single-layer to tens of layers of graphene in a size less than 30 nm, carbon quantum dots (CQDs) is becoming an advanced multifunctional material for its unique optical, electronic, spin and photoelectric properties induced by the quantum confinement effect and edge effect. In present work, upon co-doping engineering, nitrogen and chlorine co-doped CQDs with uniquely strong blue-green double emissions are developed via a facile and one-pot hydrothermal method. The crystalline and optical properties of CQDs have been well manipulated by tuning the mole ratio of nitrogen/chlorine and the reaction time. The characteristic green emission centered at 512 nm has been verified, originating from the chlorine-related states, the other blue emissions centered at 460 nm are attributed to the conjugated π-domain. Increasing the proportion of 1,2,4-benzentriamine dihydrochloride can effectively adjust the bandgap of CQDs, mainly caused by the synergy and competition of chlorine-related states and the conjugated π-domain. Prolonging the reaction time promotes more nitrogen and chlorine dopants incorporate into CQDs, which inhibits the growth of CQDs to reduce the average size of CQDs down to 1.5 nm, so that the quantum confinement effect dominates into play. This work not only provides a candidate with excellent optical properties for heteroatoms-doped carbon materials but also benefits to stimulate the intensive studies for co-doped carbon with chlorine as one of new dopants paradigm.
ABSTRACT
Several activated fly ash cenosphere (AFAC) supporting TiO2 coated ZnFe2O4 (TiO2/ZnFe2O4/AFAC) photocatalysts were prepared by sol-gel and hydrothermal methods. These photocatalysts were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FT-IR), UV-vis diffuse reflectance spectroscopy (UV-DRS) and nitrogen adsorption analyses for Brunauer-Emmett-Teller (BET) specific surface area measurements. We found that the main components of spherical AFAC were mullite (Al6Si2O13) and SiO2; the crystallite size of the TiO2/ZnFe2O4 nanocomposite was less than 10 nm and its specific surface area was 162.18 m2 g-1. The TiO2/ZnFe2O4 nanocomposite had a band-gap of 2.56 eV, which would photodegrade 95% of rhodamine B (RhB) under visible light within 75 min. When hybridized with 0.02 g AFAC, the TiO2/ZnFe2O4/0.02 g AFAC photocatalyst with a band-gap of 2.50 eV could remove 97.1% of RhB and be reused three consecutive times with minor decrease in photocatalytic performance. However, the photocatalytic performance decreased to 91.0% on increasing the dosage of AFAC to 0.30 g. The mesoporous structure of all the photocatalysts and the strong adsorption ability of AFAC accounted for the notable performance.
ABSTRACT
Molybdenum disulfide (MoS2) nanopetals were successfully synthesized by hydrothermal method (sample without sintering) and then sintered at different temperature (sintered samples). The products were characterized by X-ray powder diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), nitrogen (N2) adsorption analyses for Brunauer-Emmett-Teller (BET) specific surface area measurements, X-ray photoelectron spectrum (XPS) and Raman spectrum. XRD pattern indicated that the samples can be indexed to hexagonal phase 2H-MoS2. SEM and TEM images showed that the sintered MoS2 nanopetals had sizes ranging from 150 to 300 nm with almost the same morphology. The pore structure and surface area were nearly the same for the three sintered MoS2 nanopetals. Interestingly, XPS and Raman spectra implied that there was a few 1T-phase in the MoS2 nanopetals which enhanced the photocatalytic performance greatly when sintered at low temperature.
ABSTRACT
AIM: To establish a system of screening and culture of rat spermatogonial stem cells (SSCs). METHODS: We prepared the rat testis cells using the improved two-step enzymatic digestion, and then isolated the rat SSCs by the differential adherence selection method. The highly enriched SSCs were cultured in the serum-free culture medium of DMEM/F12 supplemented with glial cell line-derived neurotrophic factor (GDNF), soluble GFRα1 and basic fibroblast growth factor (bFGF) and on rat embryonic fibroblast (REF)feeder layer. The activity of stem cells was examined morphologically and by RT-PCR and immunocytochemical analysis for the SSCs marker gene expressions. RESULTS: The modified two-step enzymatic digestion could effectively isolate the rat testis cells, and from the isolated testis cells, rat SSCs could be successfully purified by the improved method of differential adherence selection. After over-20-day culture of the rat SSCs in serum-free medium, big colonies of SSCs were observed, and the activity of SSCs got affirmed by the positive expressions of SSCs marker genes. CONCLUSION: The system of screening and culture of rat SSCs has been established, which provide a basis for the long-term culture of rat and other animal SSCs.