Intravenous combined with aerosolised polymyxins versus intravenous polymyxins monotherapy for ventilator-associated pneumonia: a systematic review and meta-analysis.

Polymyxins was applied to treat ventilator associated pneumonia (VAP) caused by carbapenem-resistant Gram-negative bacteria (CR-GNB) via different administration routes. The potential benefits of aerosolised polymyxins as adjunctive treatment for patients still were contradictory. This review assessed the safety and efficacy of intravenous combined with aerosolised polymyxins versus intravenous polymyxins monotherapy in patients with VAP caused by CR-GNB. Two reviewers independently evaluated and extracted date from Pubmed, Embase, Cochrane library and Web of science. The primary outcome was all-cause mortality and secondary outcomes included clinical cure rate, clinical improvement rate, microbiological eradication and nephrotoxicity. Differences for dichotomous outcomes were expressed as odds ratios (OR) with 95% confidence intervals (CI). Eleven eligible studies were included. The results showed that compared with intravenous polymyxins monotherapy, intravenous plus aerosolised polymyxins therapy significantly reduced all-cause mortality rate (OR = 0.75, 95% CI 0.57 - 0.99, P = 0.045) and improved clinical improvement rate (OR = 1.62, 95% CI 1.02 - 2.60, P = 0.043) and microbial eradication rate (OR = 2.07, 95% CI 1.40 - 3.05, P = 0.000). However, there were no significant difference in terms of clinical cure rate (OR = 1.59, 95% CI 0.96 - 2.63, P = 0.072) and nephrotoxicity (OR = 1.14, 95% CI 0.80 - 1.63, P = 0.467) for intravenous plus aerosolised polymyxins therapy. Subgroup analysis revealed that the clinical improvement rate was improved significantly in case-control studies. Aerosolised polymyxins maybe a useful adjunct to intravenous polymyxins for CR-GNB VAP patients.

Leveraging machine learning for sustainable cultivation of Zn-enriched crops in Cd-contaminated karst regions.

Karst soils often exhibit elevated zinc (Zn) levels, providing an opportunity to cultivate Zn-enriched crops. (meanwhile) However, these soils also frequently contain high background levels of toxic metals, particularly cadmium (Cd), posing potential health risks. Understanding the bioaccumulation of Cd and Zn and the related drivers in a high geochemical background area can provide important insights for the safe development of Zn-enriched crops. Traditional models often struggle to accurately predict metal levels in crop systems grown on soils with high geochemical background. This study employed machine learning models, including Random Forest (RF), Support Vector Machine (SVM), and Extreme Gradient Boosting (XGBoost), to explore effective strategies for sustainable cultivation of Zn-enriched crops in karst regions, focusing on bioaccumulation factors (BAF). A total of 10,986 topsoil samples and 181 paired rhizosphere soil-crop samples, including early rice, late rice, and maize, were collected from a karst region in Guangxi. The SVM and XGBoost models demonstrated superior performance, achieving R2 values of 0.84 and 0.60 for estimating the BAFs of Zn and Cd, respectively. Key determinants of the BAFs were identified, including soil iron and manganese contents, pH level, and the interaction between Zn and Cd. By integrating these soil properties with machine learning, a framework for the safe cultivation of Zn-enriched crops was developed. This research contributes to the development of strategies for mitigating Zn deficiency in crops grown on Cd-contaminated soils.

Efficacy and safety of hyaluronic-polidocanol foam in sclerotherapy for head and neck venous malformations.

Background: Foam sclerotherapy is currently the first-line treatment for venous malformations (VMs). Hyaluronic acid-polidocanol (HA-POL) foam has been used in the treatment of head and neck VMs recently; however, its clinical efficacy and safety have yet to be further evaluated, and the impact of age and other related factors on its safety is still unclear. Objective: To assess the efficacy and safety of HA-POL foam in the treatment of head and neck VMs. Methods and materials: We performed a single-center retrospective review of all patients with VMs involving the head and neck region undergoing HA-POL foam sclerotherapy from February 2015 to February 2022 in the Oral and Maxillofacial Surgery Department of Qilu Hospital Shandong University. Patients' medical records were collected and all patients enrolled were followed up for 1-6 months (group 1), part of them were followed up for 3-9 years (group 2). Results: A total of 223 patients with head and neck VMs were enrolled in the study, with 36 patients who were followed for 3-9 years. Total response rate in group 1 was 96.41% (n = 215), of which 30.94% (n = 69) of the patients met the criteria of "resolution," and 65.47% (n = 146) of the patients had "significant improvement." In group 2, the total response rate was 72.22% (n = 26), of which the rates of the patients met the criteria of "resolution" and patients had "significant improvement" were all 36.11% (n = 13)0.144 (64.57%) patients experienced complications like localized swelling, pain and fever, and no serious complications occurred. The risk of developing complications after treatment was independent of age, and was weakly associated with the dose of HA-POL foam. Conclusion: The HA-POL foam sclerotherapy is safe and effective in the treatment of head and neck VMs.

Spatial distribution, risk assessment, and source apportionment of soil heavy metals in a karst county based on grid survey.

Soil in karst areas commonly exhibits characteristics of heavy metal enrichment. Accurate identification of soil heavy metal distribution, risks, and sources are crucial for preventing soil heavy metal pollution in karst areas. In this study, 2467 topsoil samples (0-20 cm) and 620 subsoil samples (150-200 cm) were collected using a grid-based sampling method in Tianyang County. Statistics, geo-statistics, correlation analysis, principal component analysis, and the absolute principal component-multiple linear regression model were utilized to analyze the content, spatial distribution and sources of heavy metals. The geo-accumulation index and the potential ecological risk index were employed to assess the ecological risks of heavy metals in the topsoil, with the subsoil content as baseline. The results showed that the study area's soil exhibited high heavy metal content, significantly exceeding Chinese background values. The content of heavy metals in the karst area's soil was notably higher than that in the non-karst area. The fitted semi-variogram models and the spatial distribution map revealed that the heavy metals' content was generally dominated by the geological background. As, Cr, Cu, Hg, Ni, Pb, and Zn displayed low levels of pollution in the topsoil and posed low ecological risk, with over 90 % of samples classified as unpolluted and low risk. Cd exhibited high levels of pollution and ecological risks, with 52.28 % of samples classified as polluted and 60.81 % classified as moderate to high risk. For Hg, despite only 6.94 % of samples showing polluted, the ecological risks were not negligible, with 40.65 % of samples in moderate to high risk. Natural source and anthropogenic source contribute to the heavy metals on average by 81.49 % and 18.51 %, respectively. This study provides a reference for the risk assessment of soil heavy metals, and its findings offer valuable scientific insights for the prevention of heavy metal pollution in the study area.

A New Technique of Sterile Polyethylene Instrument Cover as Temporary Corneal Patch to Reconstruct Anterior Chamber in Penetrating Keratoplasty Combined with Intraocular Surgery.

PURPOSE: Complications such as explosive choroidal hemorrhage, residual cortex, and capsule rupture often occur during intraocular surgery combined with penetrating keratoplasty (PKP) due to poor maintenance of the anterior chamber. To address these challenges, we have innovatively utilized a sterile polyethylene instrument cover to temporarily reconstruct the anterior chamber. METHODS: In this report, we describe a technique where a 'temporary corneal patch' was created from a sterile instrument cover, using a trephine to ensure a diameter approximately 1-2 mm wider than the corneal bed or perforation. This patch was then sutured into the host corneal bed or the perforation with 10-0 nylon sutures during intraocular surgery combined with PKP. Each case was evaluated for surgical efficacy and complications. RESULTS: We successfully applied this technique in three cases of combined corneal transplantation surgery. In two cases, PKP, phacoemulsification, and intraocular lens implantation were successfully performed. In the third case, PKP, vitrectomy, and other intraocular procedures were performed. No intraoperative or postoperative complications were observed. CONCLUSION: The use of a sterile polyethylene material as a temporary corneal patch for anterior chamber reconstruction represents a safe, effective, and cost-efficient approach for intraocular surgery combined with PKP or posterior segment surgery as a keratoprosthesis.

Piezoelectric Bilayer Nickel-Iron Layered Double Hydroxide Nanosheets with Tumor Microenvironment Responsiveness for Intensive Piezocatalytic Therapy.

Piezocatalytic therapy (PCT) based on 2D layered materials has emerged as a promising non-invasive tumor treatment modality, offering superior advantages. However, a systematic investigation of PCT, particularly the mechanisms underlying the reactive oxygen species (ROS) generation by 2D nanomaterials, is still in its infancy. Here, for the first time, biodegradable piezoelectric 2D bilayer nickel-iron layered double hydroxide (NiFe-LDH) nanosheets (thickness of ≈1.86 nm) are reported for enhanced PCT and ferroptosis. Under ultrasound irradiation, the piezoelectric semiconducting NiFe-LDH exhibits a remarkable ability to generate superoxide anion radicals, due to the formation of a built-in electric field that facilitates the separation of electrons and holes. Notably, the significant excitonic effect in the ultrathin NiFe-LDH system enables long-lived excited triplet excitons (lifetime of ≈5.04 µs) to effectively convert triplet O2 molecules into singlet oxygen. Moreover, NiFe-LDH exhibited tumor microenvironment (TME)-responsive peroxidase (POD)-like and glutathione (GSH)-depleting capabilities, further enhancing oxidative stress in tumor cells and inducing ferroptosis. To the best of knowledge, this is the first report on piezoelectric semiconducting sonosensitizers based on LDHs for PCT and ferroptosis, providing a comprehensive understanding of the piezocatalysis mechanism and valuable references for the application of LDHs and other 2D materials in cancer therapy.

In Vivo Confocal Microscopy Findings of a Rare Cryptococcus neoformans Keratitis.

PURPOSE: To report a rare case of fungal keratitis caused by Cryptococcus neoformans, highlighting its unique morphological features using in vivo confocal microscopy (IVCM). METHODS: This was a retrospective case report. A 66-year-old man presented with foreign body sensation and blurred vision in his left eye for over 10 months. RESULTS: His best-corrected visual acuity was 20/20. Slit-lamp examination revealed a gray-white lesion approximately 4-5 mm in the superficial layer of the central cornea without epithelial defects. The IVCM images revealed numerous round or round-like pathogens, each with a central highly reflective body surrounded by a dark ring, ranging in size from 5 to 30 µm, and to a maximum of 85 µm, observed in the corneal epithelium and superficial stroma. No obvious inflammatory cell infiltration was observed in the lesions or endothelium. C. neoformans infection was confirmed. The round pathogens completely disappeared after 8 weeks of treatment with topical amphotericin B and voriconazole eye drops. CONCLUSION: Fungal keratitis caused by C. neoformans is rare and easily overlooked due to atypical clinical signs and symptoms. This case reports the unique morphological features of C. neoformans in the cornea using IVCM for the first time, facilitating rapid, noninvasive auxiliary diagnosis of C. neoformans keratitis and treatment follow-up.

Innovative approaches in imaging photoplethysmography for remote blood oxygen monitoring.

Peripheral Capillary Oxygen Saturation (SpO2) has received increasing attention during the COVID-19 pandemic. Clinical investigations have demonstrated that individuals afflicted with COVID-19 exhibit notably reduced levels of SpO2 before the deterioration of their health status. To cost-effectively enable individuals to monitor their SpO2, this paper proposes a novel neural network model named "ITSCAN" based on Temporal Shift Module. Benefiting from the widespread use of smartphones, this model can assess an individual's SpO2 in real time, utilizing standard facial video footage, with a temporal granularity of seconds. The model is interweaved by two distinct branches: the motion branch, responsible for extracting spatiotemporal data features and the appearance branch, focusing on the correlation between feature channels and the location information of feature map using coordinate attention mechanisms. Accordingly, the SpO2 estimator generates the corresponding SpO2 value. This paper summarizes for the first time 5 loss functions commonly used in the SpO2 estimation model. Subsequently, a novel loss function has been contributed through the examination of various combinations and careful selection of hyperparameters. Comprehensive ablation experiments analyze the independent impact of each module on the overall model performance. Finally, the experimental results based on the public dataset (VIPL-HR) show that our model has obvious advantages in MAE (1.10%) and RMSE (1.19%) compared with related work, which implies more accuracy of the proposed method to contribute to public health.

Ethanol foam: a novel type of foam sclerosant for treating venous malformations.

Introduction: Sclerotherapy is a commonly utilized treatment approach for venous malformations. Absolute ethanol is renowned for its remarkable efficacy as a potent sclerosants, but it is potentially associated with severe complications. Foam sclerotherapy is considered superior to liquid sclerotherapy owing to its heightened efficacy and diminished incidence of complications. Thus, our objective was to devise an ethanol foam sclerosant that delivers exceptional efficacy while mitigating complications. Methods: In the first set of experiments, we identified the suitable range of ethanol concentrations for sclerotherapy through human umbilical vein endothelial cell proliferation assays and blood clotting experiments. Next, the surfactants polysorbate 80, egg yolk lecithin, and hyaluronic acid were added to create stable ethanol foam, with their ratios meticulously optimized. Results: The optimal concentration range of ethanol was determined to be 30-60%. Eventually, a 48% ethanol foam was successfully produced with excellent stability. Other than ethanol, the formulation included 5 × 10-3 g/mL polysorbate 80, 10-2 g/mL egg yolk lecithin, and 0.04 mL/mL hyaluronic acid. Discussion: The novel ethanol foam produced here could be a promising candidate for the treatment of venous malformations.

From prenatal diagnosis to surgical treatment: two case reports of congenital granular cell epulis.

Herein, we detail a multidisciplinary approach and sequential treatment for two infants with congenital granular cell epulis (CGCE). Ultrasonic examinations at 34 weeks of gestation revealed prominent oral masses in both fetuses. To devise a carefully considered treatment strategy, a comprehensive multidisciplinary consultation including oral and maxillofacial surgeons, pediatricians, obstetricians, and anesthesiologists was convened. Following cesarean sections, the lesions were successfully removed, measuring approximately 30 × 15 mm and 30 × 20 mm in size, respectively. Immunohistochemical analysis showed that vimentin was positive, S-100 protein was negative, and NSE protein and CD68 protein were negative. These findings underscore the importance of prenatal diagnosis of congenital granular cell epulis for the effective management of these rare benign conditions.

Therapeutic drug monitoring of polymyxin B cerebrospinal fluid concentrations in patients with carbapenem-resistant Gram-negative bacteria-induced central nervous system infection.

OBJECTIVES: Central nervous system (CNS) infections caused by carbapenem-resistant Gram-negative bacteria (CR-GNB) present a major health and economic burden worldwide. This multicentre prospective study aimed to assess the feasibility and usefulness of CSF therapeutic drug monitoring (TDM) after intrathecal/intraventricular administration of polymyxin B in patients with CNS infections. METHODS: Forty-two patients treated with intrathecal/intraventricular administration of polymyxin B against CR-GNB-induced CNS infections were enrolled. CSF trough level (Cmin) was collected beginning on Day 2 post-polymyxin B initiation and thereafter. The primary outcomes were clinical cure and 28-day all-cause mortality. RESULTS: All patients started with intrathecal/intraventricular administration of polymyxin B at a dose of 5 g/day, corresponding to a median CSF Cmin of 2.93 mg/L (range, 0.21-25.74 mg/L). Clinical cure was 71.4%, and the median CSF Cmin of this group was higher than that of clinical failure group [3.31 (IQR, 1.73-5.62) mg/L versus 2.25 (IQR, 1.09-4.12) mg/L; P = 0.011]. In addition, with MICs ≤ 0.5 mg/L, maintaining polymyxin B CSF Cmin above 2.0 mg/L showed a higher clinical cure rate (P = 0.041). The 28-day all-cause mortality rate was 31.0% and had no association with CSF Cmin. CONCLUSIONS: After intrathecal/intraventricular administration of polymyxin B, CSF concentrations fluctuated considerably inter- and intra-individual. Polymyxin B CSF Cmin above 2.0 mg/L was associated with clinical cure when MICs were ≤ 0.5 mg/L, and the feasibility of TDM warrants additional clinical studies.

Effect of catheter needle caliber on polidocanol foam stability in foam sclerotherapy.

Background: Although sclerotherapy is widely used to treat vascular malformations (VMs), it is associated with several challenges. One significant issue is the insufficient understanding of the influence of various factors on the stability of polidocanol (POL) foam used in sclerotherapy. Objective: This study aimed to explore the effect of the catheter needle caliber on foam stability when using POL with or without hyaluronic acid (HA) for the treatment of VMs. Methods and materials: The Tessari method generated sclerosant foam using POL both with and without HA. We used catheters and syringe needles of various calibers, and the resulting foam was transferred into new syringes to facilitate a comparison of foam stability. Foam half-life (FHT) was utilized as a metric to assess foam stability. Results: The study found that narrower needle calibers produced a more stable foam when POL was used alone; however, no significant effect was observed when HA was added. Furthermore, when the foam was expelled using catheters and syringe needles of the same size, no noticeable changes in the stability were observed. Conclusion: When choosing needles of varying calibers, their effect on foam stability should be carefully considered, particularly when the foam contains HA.

DTDNet: Dynamic Target Driven Network for pedestrian trajectory prediction.

Predicting the trajectories of pedestrians is an important and difficult task for many applications, such as robot navigation and autonomous driving. Most of the existing methods believe that an accurate prediction of the pedestrian intention can improve the prediction quality. These works tend to predict a fixed destination coordinate as the agent intention and predict the future trajectory accordingly. However, in the process of moving, the intention of a pedestrian could be a definite location or a general direction and area, and may change dynamically with the changes of surrounding. Thus, regarding the agent intention as a fixed 2-d coordinate is insufficient to improve the future trajectory prediction. To address this problem, we propose Dynamic Target Driven Network for pedestrian trajectory prediction (DTDNet), which employs a multi-precision pedestrian intention analysis module to capture this dynamic. To ensure that this extracted feature contains comprehensive intention information, we design three sub-tasks: predicting coarse-precision endpoint coordinate, predicting fine-precision endpoint coordinate and scoring scene sub-regions. In addition, we propose a original multi-precision trajectory data extraction method to achieve multi-resolution representation of future intention and make it easier to extract local scene information. We compare our model with previous methods on two publicly available datasets (ETH-UCY and Stanford Drone Dataset). The experimental results show that our DTDNet achieves better trajectory prediction performance, and conducts better pedestrian intention feature representation.

Cervical Sagittal Alignment and Related Factor Analysis and Prediction Model in Patients Undergoing Revision Surgery After Anterior Cervical Fusion.

INTRODUCTION: Patients with myelopathy or radiculopathy commonly undergo anterior cervical fusion surgery (ACFS), which has a notable failure rate on occasion. The goal of this study was to compare revision and nonrevision surgery patients in cervical sagittal alignment (CSA) subsequent to ACFS; additionally, to identify the best CSA parameters for predicting clinical outcome after ACFS; and furthermore, to create an equation model to assist surgeons in making decisions on patients undergoing ACFS. METHODS: The data of 99 patients with symptomatic cervical myelopathy/radiculopathy who underwent ACFS were analyzed. Patients were divided into group A (underwent revision surgery after the first surgery failed) and group B (underwent only the first surgery). We measured and analyzed both preoperative and postoperative CSA parameters, including C2 slope, T1 slope, cervical lordosis C2-C7 (CL), C2-C7 sagittal vertical axis (C2C7 SVA), occiput-C2 lordosis angle (C0-C2), and chin brow vertical angle, and we further computed the correlation between the CSA parameters and created a prediction model. RESULTS: The (T1S-CL)-C2S mismatch differed significantly between groups A and B ([9.95 ± 9.95] 0 , [3.79 ± 6.58] 0 , P < 0.05, respectively). A significant correlation was observed between C2 slope and T1CL in group B relative to group A postoperatively (R 2 = 0.42 versus R 2 = 0.09, respectively). Compared with group B, patients in group A had significantly higher C2C7SVA values, more levels of fusion, and more smokers. The sensitivity, specificity, accuracy, and discrimination of the model were, respectively, 73.5%, 84%, 78.8%, and 85.65%. CONCLUSION: The causes of revision surgery in cervical myelopathic patients after anterior cervical corpectomy and fusion/anterior cervical diskectomy and fusion are multifactorial. (T1S-CL)-C2S mismatch and high C2C7SVA are the best cervical sagittal parameters that increase the odds of revision surgery, and the effect is more enhanced when comorbidities such as smoking, low bone-mineral density, and increased levels of fusion are taken into account.

Identification of pathogen composition in a Chinese population with iatrogenic and native vertebral osteomyelitis by using mNGS.

BACKGROUND: Early antimicrobial therapy is crucial regarding the prognosis of vertebral osteomyelitis, but early pathogen diagnosis remains challenging. OBJECTIVE: In this study, we aimed to differentiate the types of pathogens in iatrogenic vertebral osteomyelitis (IVO) and native vertebral osteomyelitis (NVO) to guide early antibiotic treatment. METHODS: A total of 145 patients, who had confirmed spinal infection and underwent metagenomic next-generation sequencing (mNGS) testing, were included, with 114 in the NVO group and 31 in the IVO group. Using mNGS, we detected and classified 53 pathogens in the 31 patients in the IVO group and 169 pathogens in the 114 patients in the NVO group. To further distinguish IVO from NVO, we employed machine learning algorithms to select serum biomarkers and developed a nomogram model. RESULTS: The results revealed that the proportion of the Actinobacteria phylum in the NVO group was approximately 28.40%, which was significantly higher than the 15.09% in the IVO group. Conversely, the proportion of the Firmicutes phylum (39.62%) in the IVO group was markedly increased compared to the 21.30% in the NVO group. Further genus-level classification demonstrated that Staphylococcus was the most common pathogen in the IVO group, whereas Mycobacterium was predominant in the NVO group. Through LASSO regression and random forest algorithms, we identified 5 serum biomarkers including percentage of basophils (BASO%), percentage of monocytes (Mono%), platelet volume (PCT), globulin (G), activated partial thromboplastin time (APTT) for distinguishing IVO from NVO. Based on these biomarkers, we established a nomogram model capable of accurately discriminating between the two conditions. CONCLUSION: The results of this study hold promise in providing valuable guidance to clinical practitioners for the differential diagnosis and early antimicrobial treatment of vertebral osteomyelitis.

Leukocoria Due to Persistent Hyperplastic Primary Vitreous.

This case report discusses a diagnosis of persistent hyperplastic primary vitreous presenting as leukocoria in a boy aged 50 days.

Evaluation of transformation invariant loss function with distance equilibrium in prediction of imaging photoplethysmography characteristics.

Objective. Monitoring changes in human heart rate variability (HRV) holds significant importance for protecting life and health. Studies have shown that Imaging Photoplethysmography (IPPG) based on ordinary color cameras can detect the color change of the skin pixel caused by cardiopulmonary system. Most researchers employed deep learning IPPG algorithms to extract the blood volume pulse (BVP) signal, analyzing it predominantly through the heart rate (HR). However, this approach often overlooks the inherent intricate time-frequency domain characteristics in the BVP signal, which cannot be comprehensively deduced solely from HR. The analysis of HRV metrics through the BVP signal is imperative. APPROACH: In this paper, the transformation invariant loss function with distance equilibrium (TIDLE) loss function is applied to IPPG for the first time, and the details of BVP signal can be recovered better. In detail, TIDLE is tested in four commonly used IPPG deep learning models, which are DeepPhys, EfficientPhys, Physnet and TS_CAN, and compared with other three loss functions, which are mean absolute error (MAE), mean square error (MSE), Neg Pearson Coefficient correlation (NPCC). MAIN RESULTS: The experiments demonstrate that MAE and MSE exhibit suboptimal performance in predicting LF/HF across the four models, achieving the Statistic of Mean Absolute Error (MAES) of 25.94% and 34.05%, respectively. In contrast, NPCC and TIDLE yielded more favorable results at 13.51% and 11.35%, respectively. Taking into consideration the morphological characteristics of the BVP signal, on the two optimal models for predicting HRV metrics, namely DeepPhys and TS_CAN, the Pearson coefficients for the BVP signals predicted by TIDLE in comparison to the gold-standard BVP signals achieved values of 0.627 and 0.605, respectively. In contrast, the results based on NPCC were notably lower, at only 0.545 and 0.533, respectively. SIGNIFICANCE: This paper contributes significantly to the effective restoration of the morphology and frequency domain characteristics of the BVP signal.

The Effect of Pushing Rate on Foam Stability in the Tessari Method.

BACKGROUND: The Tessari method is commonly used in sclerotherapy for producing foam, involving 2 syringes pushed back and forth 20 times with the use of a 3-way connector. Many factors affect the foam stability which is crucial for clinical efficacy. OBJECTIVE: This study aimed to identify the optimal pushing rate which may impact the foam stability. MATERIALS AND METHODS: Polidocanol (POL) solution (1% and 3%) was used to make sclerosant foam via the Tessari method, with a total of 20 pushes performed at different time durations: 10, 15, 20, 25, 30, 35, and 40 seconds. The foam stability was recorded using foam half-life time (FHT), and the pushing pressure to the syringe was recorded using a self-made electric device. Both FHT and the pressure among different groups were compared respectively. RESULTS: The FHT was decreased as pushing duration exceeding 20 seconds in POL 1% and 15 seconds in POL 3%. Both the highest FHT and pressure point were located in the 10-second group. CONCLUSION: It is recommended to complete 20 back-and-forth passages within 10 seconds to create stable foam.

Superconductivity and Charge-Density-Wave-Like Transition in Th2Cu4As5.

We report the synthesis, crystal structure, and physical properties of a novel ternary compound, Th2Cu4As5. The material crystallizes in a tetragonal structure with lattice parameters a = 4.0639(3) Å and c = 24.8221(17) Å. Its structure can be described as an alternating stacking of fluorite-type Th2As2 layers with antifluorite-type double-layered Cu4As3 slabs. The measurement of electrical resistivity, magnetic susceptibility, and specific heat reveals that Th2Cu4As5 undergoes bulk superconducting transition at 4.2 K. Additionally, all these physical quantities exhibit anomalies at 48 K, accompanied by a sign change in the Hall coefficient, suggesting a charge-density-wave-like (CDW) phase transition. Drawing from both experimental data and band calculations, we propose that the superconducting and CDW-like phase transitions are, respectively, associated with the Cu4As3 slabs and the As plane in the Th2As2 layers.