ABSTRACT
Drip fertigation (DF) is a widely used technology to increase grain yield with water and fertilizer conservation. However, the mechanism of high grain yield (GY) under DF is still unclear. Here, a four-year field experiment assessed the impacts of four treatments (i.e., conventional irrigation and nitrogen application, CK; drip irrigation with conventional nitrogen fertilization, DI; split-nitrogen fertigation with conventional irrigation, SF; and drip fertigation, DF) on maize phenology, leaf photosynthetic rates, grain filling processes, plant biomass, and GY. The results showed that DF significantly increased maize GY by affecting phenology, grain filling traits, aboveground biomass (BIO) accumulation, and translocation. Specifically, DF significantly increased leaf chlorophyll content, which enhanced leaf photosynthetic rates, and together with an increase of leaf area index, promoted BIO accumulation. As a result, the BIO at the silking stage of DF increased by 29.5%, transported biomass increased by 109.2% (1.2 t ha-1), and the accumulation of BIO after silking increased by 23.1% (1.7 t ha-1) compared with CK. Meanwhile, DF prolonged grain filling days, significantly increased the grain weight of 100 kernels, and promoted GY increase. Compared with CK, the four-year averaged GY and BIO increased by 34.3% and 26.8% under DF; a 29.7%, 46.1%, and 24.2% GY increase and a 30.7%, 39.5%, and 29.9% BIO increase were contributed by irrigation, nitrogen, and coupling effects of irrigation and nitrogen, respectively. These results reveal the high yield mechanism of drip-fertigated maize, and are of important significance for promoting the application of drip fertigation.
ABSTRACT
BACKGROUND: Environmental microorganisms are major contributors to the development and spread of disease. Chemical disinfection can inhibit pathogens and play a preventive role against diseases. In agriculture, prolonging the floating time of chemical pesticides in the air has a positive effect on the control of airborne diseases. However, the interaction of chemical pesticides with airborne pathogens is not yet known. RESULTS: Here, triazole fungicide was transformed into stable smoke aerosols in order to assess the feasibility of employing phase transition release pesticides for air disinfection. The phase transition had a minimal impact on hexaconazole (Hexa) and myclobutanil (Mycl), with their smoke formation rates remaining consistently >90%. In microscopic morphology, triadimenol (Tria) and epoxiconazole (Epox) are solid, and tebuconazole (Tebu), Hexa, Mycl and difenoconazole (Dife) are liquid. Liquid smoke has advantages over solid smoke in the inhibition of environmental pathogens. The floatability and spatial distribution of fungicide aerosol were optimized by the combination of smoke particles with different properties, so that the fungicide aerosol could meet the conditions of practical application. In practical applications, smoke exhibits a gentler deposition process at the target interface compared to spray, along with a more homogeneous distribution of fungicides. Moreover, fungicide smoke demonstrates superior control efficacy and leaves behind lower residual amounts on fruit. CONCLUSION: In conclusion, the implementation of fungicide phase transition as a smoke aerosol offers a viable approach to effectively suppress pathogen aerosols and enhance the control of airborne diseases. © 2024 Society of Chemical Industry.
ABSTRACT
Efficient acquisition of crop leaf moisture information holds significant importance for agricultural production. This information provides farmers with accurate data foundations, enabling them to implement timely and effective irrigation management strategies, thereby maximizing crop growth efficiency and yield. In this study, unmanned aerial vehicle (UAV) multispectral technology was employed. Through two consecutive years of field experiments (2021-2022), soybean (Glycine max L.) leaf moisture data and corresponding UAV multispectral images were collected. Vegetation indices, canopy texture features, and randomly extracted texture indices in combination, which exhibited strong correlations with previous studies and crop parameters, were established. By analyzing the correlation between these parameters and soybean leaf moisture, parameters with significantly correlated coefficients (p < 0.05) were selected as input variables for the model (combination 1: vegetation indices; combination 2: texture features; combination 3: randomly extracted texture indices in combination; combination 4: combination of vegetation indices, texture features, and randomly extracted texture indices). Subsequently, extreme learning machine (ELM), extreme gradient boosting (XGBoost), and back propagation neural network (BPNN) were utilized to model the leaf moisture content. The results indicated that most vegetation indices exhibited higher correlation coefficients with soybean leaf moisture compared with texture features, while randomly extracted texture indices could enhance the correlation with soybean leaf moisture to some extent. RDTI, the random combination texture index, showed the highest correlation coefficient with leaf moisture at 0.683, with the texture combination being Variance1 and Correlation5. When combination 4 (combination of vegetation indices, texture features, and randomly extracted texture indices) was utilized as the input and the XGBoost model was employed for soybean leaf moisture monitoring, the highest level was achieved in this study. The coefficient of determination (R2) of the estimation model validation set reached 0.816, with a root-mean-square error (RMSE) of 1.404 and a mean relative error (MRE) of 1.934%. This study provides a foundation for UAV multispectral monitoring of soybean leaf moisture, offering valuable insights for rapid assessment of crop growth.
ABSTRACT
Leaf chlorophyll content (LCC) is an important physiological index to evaluate the photosynthetic capacity and growth health of crops. In this investigation, the focus was placed on the chlorophyll content per unit of leaf area (LCCA) and the chlorophyll content per unit of fresh weight (LCCW) during the tuber formation phase of potatoes in Northern Shaanxi. Ground-based hyperspectral data were acquired for this purpose to formulate the vegetation index. The correlation coefficient method was used to obtain the "trilateral" parameters with the best correlation between potato LCCA and LCCW, empirical vegetation index, any two-band vegetation index constructed after 0-2 fractional differential transformation (step size 0.5), and the parameters with the highest correlation among the three spectral parameters, which were divided into four combinations as model inputs. The prediction models of potato LCCA and LCCW were constructed using the support vector machine (SVM), random forest (RF) and back propagation neural network (BPNN) algorithms. The results showed that, compared with the "trilateral" parameter and the empirical vegetation index, the spectral index constructed by the hyperspectral reflectance after differential transformation had a stronger correlation with potato LCCA and LCCW. Compared with no treatment, the correlation between spectral index and potato LCC and the prediction accuracy of the model showed a trend of decreasing after initial growth with the increase in differential order. The highest correlation index after 0-2 order differential treatment is DI, and the maximum correlation coefficients are 0.787, 0.798, 0.792, 0.788 and 0.756, respectively. The maximum value of the spectral index correlation coefficient after each order differential treatment corresponds to the red edge or near-infrared band. A comprehensive comparison shows that in the LCCA and LCCW estimation models, the RF model has the highest accuracy when combination 3 is used as the input variable. Therefore, it is more recommended to use the LCCA to estimate the chlorophyll content of crop leaves in the agricultural practices of the potato industry. The results of this study can enhance the scientific understanding and accurate simulation of potato canopy spectral information, provide a theoretical basis for the remote sensing inversion of crop growth, and promote the development of modern precision agriculture.
ABSTRACT
The grating-based magneto-optical trap (GMOT) is a promising approach for miniaturizing cold-atom systems. However, the power consumption of a GMOT system dominates its feasibility in practical applications. In this study, we demonstrated a GMOT system based on planar elements that can operate with low power consumption. A high-diffraction-efficiency grating chip was used to cool atoms with a single incident beam. A planar coil chip was designed and fabricated with a low power consumption nested architecture. The grating and coil chips were adapted to a passive pump vacuum chamber, and up to 106 87Rb atoms were trapped. These elements effectively reduce the power consumption of the GMOT and have great potential for applications in practical cold-atom-based devices.
ABSTRACT
Kiwifruit is widely cultivated for its high vitamin C content and nutritional value. In January 2022, root rot symptoms were found in about 30% of Actinidia chinensis cv. Jinyan plants grafted on A. deliciosa rootstocks in an orchard located in Sanming (26.32°N, 117.23°E), Fujian Province of China. The affected plants appeared stunted, with brown and decaying roots, some of which were covered with white hyphae. To isolate the pathogen, the surfaces of typical symptomatic roots were sterilized for 30 s using 75% ethanol, followed by four rinses in sterile water, placing on potato dextrose agar (PDA), and incubating away from light at 25°C for 7 days. 16 Globisporangium-like isolates were obtained through hyphal tip isolation, displaying a milky-white appearance with irregular protuberances on the surface, and yellow-white backs with radial fold lines. The isolates were then cultured on corn meal agar for 5 days at 25°C in dark for morphological characteristics. Under microscope, the hyphae appeared as long strips without septa and 4.1 to 8.2 µm wide (average 6.7 µm), containing irregularly sized spherical droplets. Both terminal and intercalary hyphae swellings were observed; these appeared either spherical or subspherical, with some having projections. Their dimensions were 12.3 to 27.6 µm (average 17.3 µm). The oospores were mostly spherical, either plerotic or aplerotic, 11.8 to 22.3 µm wide (average 18.9 µm), with occasional projections. The antheridia were rod-shaped and curved, with one end attached to the oogonia. Amplification of the sequences of internal transcribed spacer (ITS) regions and cytochrome c oxidase subunit I (COI) were conducted using the primers ITS1/ITS4 (White et al. 1990) and OomCoxI-Levlo/OomCoxI-Levup (Robideau et al. 2011), respectively. The sequencing results revealed identical ITS and COI sequences in all 16 isolates. BLASTn analysis of the 969-bp ITS sequence ON202808 showed 99.38-99.59% similarity (965/971bp, 967/971bp) with the KJ162353 and AY598701 sequences from Globisporangium spinosum isolates, while the 700-bp COI sequence ON075783 showed 100% and 99.41% identity (680/680bp, 676/680bp) with the GenBank sequences HQ708835 and HQ708832, respectively, from G. spinosum. Phylogenetic analysis also showed that the obtained isolate (termed MA16) clustered with isolates from G. spinosum on the same evolutionary branch. For pathogenicity testing, four-month-old healthy Jinyan (A. chinensis) plants grown in sterilized media were transferred to sterile petri dishes covered with wet filter paper, and their roots were inoculated with a 5-mm-wide disk of MA16 when cultivated on PDA medium for 5 days. Miliang-1 (A. deliciosa) and Hongyang (A. chinensis) plants were treated similarly. The control groups each included three plants that were inoculated with non-colonized PDA. The plants were kept at 25 °C with a 12-/12-h light/dark cycle for 10 days when the inoculated plants exhibited root rot symptoms similar to those seen in the field, together with rotting and browning of the leaves. The control plants appeared healthy with no symptoms. After re-isolated from infected tissues, the pathogen was verified to be G. spinosum according to its ITS sequence, thus fulfilling the Koch's postulates. Recently, Pythium spinosum has been classified as G. spinosum according to whole-genome sequencing and phylogenomic analysis (Nguyen et al. 2022). Based on the morphological features and pathogenicity results, MA16 was identified as G. spinosum (van der Plaats-Niterink 1981; Huo et al. 2023). This report appears to be the first description of kiwifruit root rots caused by G. spinosum in China, and its identification will assist the development of strategies to counteract the disease.
ABSTRACT
Spin-orbit couplings (SOCs), originating from the relativistic corrections in the Dirac equation, offer nonlinearity in the classical limit and are capable of driving chaotic dynamics. In a nanoscale quantum dot confined by a two-dimensional parabolic potential with SOCs, various quantum scar states emerge quasi-periodically in the eigenstates of the system, when the ratio of confinement energies in the two directions is nearly commensurable. The scars, displaying both quantum interference and classical trajectory features on the electron density, due to relativistic effects, serve as a bridge between the classical and quantum behaviors of the system. When the strengths of Rashba and Dresselhaus SOCs are identical, the chaos in the classical limit is eliminated as the classical Hamilton's equations become linear, leading to the disappearance of all quantum scar states. Importantly, the quantum scars induced by SOCs are robust against small perturbations of system parameters. With precise control achievable through external gating, the quantum scar induced by Rashba SOC is fully controllable and detectable.
ABSTRACT
Integrating high-κ dielectrics with a small equivalent oxide thickness (EOT) with two-dimensional (2D) semiconductors for low-power consumption van der Waals (vdW) heterostructure electronics remains challenging in meeting both interface quality and dielectric property requirements. Here, we demonstrate the integration of ultrathin amorphous HfOx sandwiched within vdW heterostructures by the selective thermal oxidation of HfSe2 precursors. The self-cleaning process ensures a high-quality interface with a low interface state density of 1011-1012 cm-2 eV-1. The synthesized HfOx displays excellent dielectric properties with an EOT of â¼1.5 nm, i.e., a high κ of â¼16, an ultralow leakage current of 10-6 A/cm2, and an impressively high breakdown field of 9.5 MV/cm. This facilitates low-power consumption vdW heterostructure MoS2 transistors, demonstrating steep switching with a low subthreshold swing of 61 mV/decade. This one-step integration of high-κ dielectrics into vdW sandwich heterostructures holds immense potential for developing low-power consumption 2D electronics while meeting comprehensive dielectric requirements.
ABSTRACT
Comprehensive regional remote analysis tends to neglect lakes in exorheic basins on the Qinghai-Tibetan Plateau (QTP), and a concurrent lack of discussions on whether there exist imbalanced explanations for the driving forces of both internal and external lakes is also present. We integrate multisourced lake datasets, high-resolution information, and available altimetry datasets to establish multiple mathematical models to meta-simulate lake volume changes, extend current lake variation datasets, and quantify the imbalance of variations and factors driving the water mass budget. The results showed that the primary cause of lake variations in QTP is net precipitation (57.75 ± 31.46%), followed by glacier runoff (33.53 ± 31.42%), and permafrost (8.34 ± 7.87%). Even though glacier runoff is currently considered as a weak factor of lake variation, heterogeneous results call for remaining attention in glacier-induced lake basins. Imbalance embodying in lake variability but not in contributions of driving factors, which calls for special lake management ways in different watersheds.
Subject(s)
Lakes , Models, Theoretical , Tibet , Ice CoverABSTRACT
Ferroelectric memristors hold immense promise for advanced memory and neuromorphic computing. However, they face limitations due to low readout current density in conventional designs with low-conductive ferroelectric channels, especially at the nanoscale. Here, we report a ferroelectric-mediated memristor utilizing a 2D MoS2 nanoribbon channel with an ultrascaled cross-sectional area of <1000 nm2, defined by a ferroelectric BaTiO3 nanoribbon stacked on top. Strikingly, the Schottky barrier at the MoS2 contact can be effectively tuned by the charge transfers coupled with quasi-zero-dimensional polarization charges formed at the two ends of the nanoribbon, which results in distinctive resistance switching accompanied by multiple negative differential resistance showing the high-current density of >104 A/cm2. The associated space charges in BaTiO3 are minimized to â¼3.7% of the polarization charges, preserving nonvolatile polarization. This achievement establishes ferroelectric-mediated nanoscale semiconductor memristors with high readout current density as promising candidates for memory and highly energy-efficient in-memory computing applications.
ABSTRACT
Van der Waals (vdW) heterostructures are composed of atomically thin layers assembled through weak (vdW) force, which have opened a new era for integrating materials with distinct properties and specific applications. However, few studies have focused on whether and how anisotropic materials affect heterostructure system. The study introduces anisotropic and isotropic materials in a heterojunction system to change the in-plane symmetry, offering a new degree of freedom for modulating its properties. The sample is fabricated by manually stacking ReS2 and WS2 flakes prepared by mechanical exfoliation. Raman spectra and photoluminescence measurements confirm the formation of an effective heterojunction, indicating interlayer coupling of the system. The anisotropy and asymmetry of the WS2 -ReS2 heterostructure system can be adjusted by the introduction of isotropic WS2 and anisotropic ReS2 , which can be proved by the change of the polarized Raman pattern. In the transient absorption measurement, the transient absorption spectra of WS2 -ReS2 heterostructure are red-shifted compared to those of WS2 monolayer, and the charge transfer is observed in the heterostructure. These results show the potential of anisotropic 2D materials in anisotropy modulation of heterostructures, which may promote future electronic or photonic application.
ABSTRACT
Mainstream non-volatile memory (NVM) devices based on floating gate structures or phase-change/ferroelectric materials face inherent limitations that compromise their suitability for long-term data storage. To address this challenge, a novel memory device based on light-programmed lattice engineering of thin rhenium disulfide (ReS2 ) flakes is proposed. By inducing sulfur vacancies in the ReS2 channel through light illumination, the device's electrical conductivity is modified accordingly and multiple conductance states for data storage therefore are generated. The device exhibits more than 128 distinct states with linearly increasing conductance, corresponding to a sevenfold increase in storage density. Through further optimization to achieve atomic-level precision in defect creation, it is possible to achieve even higher storage densities. These states are extremely stable in vacuum or inert ambient showing long retention of >10 years, while they can be erased upon exposure to the air. The ReS2 memory device can maintain its stability over multiple program-erase operation cycles and shows superior wavelength discrimination capability for incident light in the range of 405-785 nm. This device represents a significant contribution to NVM technology by offering the ability to store information in multistate memory and enabling filter-free color image recorder applications.
ABSTRACT
We present an atom-based approach for determining microwave electric and magnetic fields by using a single rubidium vapor cell in a microwave waveguide. For a 87Rb cascade three-level system employed in our experiment, a weak probe laser driving the lower transition, 5S1/2â5P3/2, is first used to measure the microwave magnetic field based on the atomic Rabi resonance. When a counter-propagating strong coupling laser is subsequently turned on to drive the Rydberg transition, 5P3/2â67D5/2, the same probe laser is then used as a Rydberg electromagnetically induced transparency (EIT) probe to measure the microwave electric field by investigating the resonant microwave dressed Autler-Townes splitting (ATS). By tuning the hyperfine transition frequency of the ground state using an experimentally feasible static magnetic field, we first achieved a measurement of the microwave electric and magnetic field strength at the same microwave frequency of 6.916â GHz. Based on the ideal relationship between the electric and magnetic field components, we obtained the equivalent microwave magnetic fields by fitting the inversion to the measured microwave electric fields, which demonstrated that the results were in agreement with the experimental measurement of the microwave magnetic fields in the same microwave power range. This study provides new experimental evidence for quantum-based microwave measurements of electric and magnetic fields by a single sensor in the same system.
ABSTRACT
Fractional crystallization plays a critical role in generating the differentiated continental crust on Earth. However, whether efficient crystal-melt separation can occur in viscous felsic magmas remains a long-standing debate because of the difficulty in discriminating between differentiated melts and complementary cumulates. Here, we found large (~1 per mil) potassium isotopic variation in 54 strongly peraluminous high-silica (silicon dioxide >70 weight %) leucogranites from the Himalayan orogen, with potassium isotopes correlated with trace elemental proxies (e.g., strontium, rubidium/strontium, and europium anomaly) for plagioclase crystallization. Quantitative modeling requires up to ~60 to 90% fractional crystallization to account for the progressively light potassium isotopic composition of the fractionated leucogranites, while plagioclase accumulation results in enrichment of heavy potassium isotopes in cumulate leucogranites. Our findings strongly support fractional crystallization of high-silica magmas and highlight the great potential of potassium isotopes in studying felsic magma differentiation.
ABSTRACT
Secondary ion batteries rely on two-dimensional (2D) electrode materials with high energy density and outstanding rate capability. Rb- and Cs-ion batteries (RIBs and CIBs) are late-model batteries. Herein, using first-principles calculations, the potential performance of H-MoS2 as a 2D electrode candidate in RIBs and CIBs has been investigated. The M-top site on 2D H-MoS2 possesses the most stable metal atom binding sites, and after adsorbing Rb and Cs atoms, its Fermi level goes up to the conduction band, indicating a semiconductor-to-metal transition. The maximal theoretical capacities of RIBs and CIBs are 372.05 (comparable to those of commercial graphite-based LIBs) and 223.23 mA h g-1, respectively, due to the strong adsorption capability of H-MoS2 for Rb and Cs ions. Noticeably, the diffusion barriers of Rb and Cs on H-MoS2 are 0.037 and 0.036 eV, respectively. Such a low diffusion barrier gives MoS2-based RIBs and CIBs high rate capability. In addition, H-MoS2 also has the characteristics of suitable open-circuit voltage, low expansion, good cycle stability, low cost, and easy experimental realization. These results indicate that MoS2-based RIBs and CIBs are innovative batteries with great potential, and may provide opportunities for cross-application of energy storage and multiple disciplines.
ABSTRACT
The functional reconfiguration of transistors and memory in homogenous ferroelectric devices offers significant opportunities for implementing the concepts of in-memory computing and logic-memory monolithic integration. Thus far, reconfiguration is realized through programmable doping profiles in the semiconductor channel using multiple-gate operation. This complex device architecture limits further scaling to match the overall chip requirements. Here, reconfigurable memory/transistor functionalities in a ferroelectric-gated van der Waals transistor by controlling the behavior of ferroelectric oxygen vacancies at the interface are demonstrated. Short- and long-term memory functions are demonstrated by modulating the border oxygen vacancy distribution and the associated charge dynamics. The quasi-nonvolatile long-term memory exhibits data retention of over 105 s and endurance of up to 5 × 105 cycles, verifying its applicability as a potential device platform for neuromorphic networks. More importantly, by modulating the ferroelectricity of the interfacial domains with the interactions of oxygen vacancies, a hysteresis-free logic transistor is realized with a subthermionic subthreshold swing down to 46 mV dec-1 , which resembles a negative-capacitance field-effect transistor. The new concept of achieving functional reconfiguration with prior device performance in a single-gate ferroelectric field-effect transistor is of great advantage in future integrated circuit applications.
ABSTRACT
Motivated by the high expectation for efficient electrostatic modulation of charge transport at very low voltages, atomically thin 2D materials with a range of bandgaps are investigated extensively for use in future semiconductor devices. However, researchers face formidable challenges in 2D device processing mainly originated from the out-of-plane van der Waals (vdW) structure of ultrathin 2D materials. As major challenges, untunable Schottky barrier height and the corresponding strong Fermi level pinning (FLP) at metal interfaces are observed unexpectedly with 2D vdW materials, giving rise to unmodulated semiconductor polarity, high contact resistance, and lowered device mobility. Here, FLP observed from recently developed 2D semiconductor devices is addressed differently from those observed from conventional semiconductor devices. It is understood that the observed FLP is attributed to inefficient doping into 2D materials, vdW gap present at the metal interface, and hybridized compounds formed under contacting metals. To provide readers with practical guidelines for the design of 2D devices, the impact of FLP occurring in 2D semiconductor devices is further reviewed by exploring various origins responsible for the FLP, effects of FLP on 2D device performances, and methods for improving metallic contact to 2D materials.
ABSTRACT
People spend increasing amounts of time at home, yet the indoor home environment remains understudied in terms of potential exposure to toxic trace metals. We evaluated trace metal (and metalloid) concentrations (As, Cu, Cr, Mn, Ni, Pb, and Zn) and health risks in indoor dust from homes from 35 countries, along with a suite of potentially contributory residential characteristics. The objective was to determine trace metal source inputs and home environment conditions associated with increasing exposure risk across a range of international communities. For all countries, enrichments compared to global crustal values were Zn > Pb > Cu > As > Cr > Ni; with the greatest health risk from Cr, followed by As > Pb > Mn > Cu > Ni > Zn. Three main indoor dust sources were identified, with a Pb-Zn-As factor related to legacy Pb sources, a Zn-Cu factor reflecting building materials, and a Mn factor indicative of natural soil sources. Increasing home age was associated with greater Pb and As concentrations (5.0 and 0.48 mg/kg per year of home age, respectively), as were peeling paint and garden access. Therefore, these factors form important considerations for the development of evidence-based management strategies to reduce potential risks posed by indoor house dust. Recent findings indicate neurocognitive effects from low concentrations of metal exposures; hence, an understanding of the home exposome is vital.
Subject(s)
Metalloids , Metals, Heavy , Trace Elements , China , Dust/analysis , Environmental Monitoring , Humans , Metalloids/analysis , Risk Assessment , Trace Elements/analysisABSTRACT
Two-dimensional (2D) transition-metal dichalcogenide (TMDC)-based semiconducting van der Waals (vdW) heterostructures are considered as potential candidates for next-generation nanoelectronics due to their unique and tunable properties. Controlling the carrier type and band alignment in 2D TMDCs and their vdW heterostructures is critical for realizing heterojunctions with the desired performances and functionalities. In this report, controlling the carrier type and band alignment in a vertical MoTe2/MoS2 heterojunction is presented via thickness engineering and surface charge transfer doping. A highly rectifying p-n diode and a nonrectifying n-n junction are obtained with different MoTe2 thicknesses due to their different doping conditions. A vertical tunnel diode is subsequently achieved with a controlled oxygen plasma treatment, which selectively induces degenerate p-type doping to MoTe2, whereas the intrinsic n-type characteristic of MoS2 is maintained during the treatment. These techniques to realize multifunctional diodes are universal and applicable to emerging nanoelectronics based on 2D materials.
ABSTRACT
Blood lead (Pb) poisoning remains a global concern, particularly for children in their early developmental years. Broken Hill is Australia's oldest operating silver-zinc-lead mine. In this study, we utilized recent advances in machine learning to assess multiple algorithms and identify the most optimal model for predicting childhood blood Pb levels (BLL) using Broken Hill children's (<5 years of age) data (n = 23,749) from 1991 to 2015, combined with demographic, socio-economic, and environmental influencing factors. We applied model-agnostic methods to interpret the most optimal model, investigating different environmental and human factors influencing childhood BLL. Algorithm assessment showed that stacked ensemble, a method for automatically and optimally combining multiple prediction algorithms, enhanced predictive performance by 1.1% with respect to mean absolute error (p < 0.01) and 2.6% for root-mean-squared error (p < 0.01) compared to the best performing constituent algorithm (random forest). By interpreting the model, the following information was acquired: children had higher BLL if they resided within 1.0 km to the central mine area or 1.37 km to the railroad; year of testing had the greatest interactive strength with all other factors; BLL increased faster in Aboriginal than in non-Aboriginal children at 9-10 and 12-18 months of age. This "stacked ensemble + model-agnostic interpretation" framework achieved both prediction accuracy and model interpretability, identifying previously unconnected variables associated with elevated childhood BLL, offering a marked advantage over previous works. Thus, this approach has a clear value and potential for application to other environmental health issues.