Co-upcycling of Plastic Waste and Biowaste via Tandem Transesterification Reactions.

Polyethylene terephthalate (PET) and glycerol are prevalent forms of plastic and biowaste, necessitating facile and effective strategies for their upcycling treatment. Herein, we present an innovative one-pot reaction system for the concurrent depolymerization of PET plastics and the transesterification of glycerol into dimethyl terephthalate (DMT), a valuable feedstock in polymer manufacturing. This process occurs in the presence of methyl acetate (MA), a byproduct of the industrial production of acetic acid. The upcycling of biowaste glycerol into glycerol acetates renders them valuable additives for application in both the biofuel and chemical industries. This integrated reaction system enhances the conversion of glycerol to acetins compared with the singular transesterification of glycerol. In this approach, cost-effective catalysts, based on perovskite-structured CaMnO3, were employed. The catalyst undergoes in situ reconstruction in the tandem PET/glycerol/MA system due to glycerolation between the metal oxides and glycerol/acetins. This process results in the formation of small metal oxide nanoparticles confined in amorphous metal glycerolates, thereby enhancing the PET depolymerization efficiency. The optimized coupled reaction system can achieve a product yield exceeding 70% for glycerol acetates and 68% for PET monomers. This research introduces a tandem pathway for the simultaneous upcycling of PET plastic waste and biowaste glycerol with minimal feedstock input and maximal reactant utilization efficiency, promising both economic advantages and positive environmental impacts.

Sharp bend and large FSR ring resonator based on the free-form curves on a thin-film lithium niobate platform.

Sharp bends are crucial for large-scale and high-density photonics integration on thin-film lithium niobate platform. In this study, we demonstrate low-loss (<0.05 dB) and sharp bends (Reff = 30 µm) using free-form curves with a 200-nm-thick slab and a rib height of 200 nm on x-cut lithium niobate. Employing the same design method, we successfully realize a compact fully-etched ring resonator with a remarkably large free spectral range of 10.36 nm experimentally. Notably, the equivalent radius of the ring resonator is a mere 15 µm, with a loaded Q factor reaching 2.2 × 104.

Atomic Layer Deposition of the Geometry Separated Lewis and Brønsted Acid Sites for Cascade Glucose Conversion.

Solid acid catalysts with bi-acidity are promising as workhouse catalysts in biorefining to produce high-quality chemicals and fuels. Herein, we report a new strategy to develop bi-acidic cascade catalysts by separating both acid sites in geometry via the atomic layer deposition (ALD) of Lewis acidic alumina on Brønsted acidic supports. Visualized by transmission electron microscopy and electron energy loss spectroscopy mapping, the ALD-deposited alumina forms a conformal alumina domain with a thickness of around 3 nm on the outermost surface of mesoporous silica-alumina. Solid state nuclear magnetic resonance investigation shows that the dominant Lewis acid sites distribute on the outermost surface, whereas intrinsic Brønsted acid sites locate inside the nanopores within the silica-rich substrate. In comparison to other bi-acidic solid catalyst counterparts, the special geometric distance of Lewis and Brønsted acid sites minimized the synergetic effect, leading to a cascade reaction environment. For cascade glucose conversion, the designed ALD catalyst showed a highly enhanced catalytic performance.