ABSTRACT
Aristolochic acids (AAs), which are a group of nitrophenanthrene carboxylic acids formed by Aristolochia plant, have become an increasing serious threat to humans due to their nephrotoxicity and carcinogenicity. Fast and accurate approaches capable of simultaneous sensing of aristolochic acids (I-IV) are vital to avoid intake of such compounds. In this research, the novel ratiometric fluorescence zinc metal-organic framework and its nanowire have been prepared. The two different coordination modes (tetrahedral configuration and twisted triangular bipyramidal configuration) within zinc metal-organic framework lead to the significant double emissions. The ratiometric fluorescence approach based on nanowire provides a broader concentration range (3.00 × 10-7~1.00 × 10-4 M) and lower limit of detection (3.70 × 10-8 M) than that based on zinc metal-organic framework (1.00 × 10-6~1.00 × 10-4 M, 5.91 × 10-7 M). The RSDs of the results are in the range 1.4-3.5% (nanowire). The density functional theory calculations and UV-Vis absorption verify that the sensing mechanism is due to charge transfer and energy transfer. Excellent spiked recoveries for AAs(I-IV) in soil and water support that nanowire is competent to simultaneously detect these targets in real samples, and the proposed approach has potential as a fluorescence sensing platform for the simultaneous detection of AAs (I-IV) in complex systems.
Subject(s)
Aristolochic Acids , Limit of Detection , Metal-Organic Frameworks , Nanowires , Aristolochic Acids/analysis , Aristolochic Acids/chemistry , Metal-Organic Frameworks/chemistry , Nanowires/chemistry , Zinc/chemistry , Spectrometry, Fluorescence/methods , Water Pollutants, Chemical/analysis , Water Pollutants, Chemical/chemistry , Luminescent Measurements/methods , Fluorescent Dyes/chemistryABSTRACT
A sensor capable of sensing of water in various organic solvents ranging from water-soluble to water-miscible solvents is still a challenging task. In this research, a cyclic polymer fluorescence chemosensor (CPFC) has been developed for sensing of water by turn-on model in 9 organic solvents and turn-off model in DMA, where the broadest concentration range and the lowest detection limit was obtained for water in DMA (10 %-90 %) and dioxane (0.011 %), respectively. The sensing mechanism is explored by theory calculation and experimental investigation. The amphiphilic nature endows the polymer probe with great potential for measuring various contaminants from aqueous and nonaqueous mediums. Furthermore, the present search highlights the potential applications of cyclic polymer as fluorescence probes in the field of sensing.
ABSTRACT
Active antibacterial materials play an important role in solving food safety problems caused by pathogen contamination. In this study, a composite active antibacterial material with the synergistic antibacterial effectiveness of photothermal, photodynamic and the surface charge of polyphenols was developed, where the multi-porous polyphenol functionalized metal-organic frameworks (ZIF-8-TA) were used as the framework carrier, and black phosphorus quantum dots (BPQDs) were used as the photosensitive source. The resulted ZIF-8-TA/PBQDs possesses excellent photothermal conversion efficiency (27.92%), photodynamic performance and surface charge, and these factors ensure the outstanding broad-spectrum antibacterial performance (100%). Multifunctional characteristics and excellent biocompatibility endow the materials with vast potential for foodstuff packaging. The results showed that the composite antibacterial film produced by doping ZIF-8-TA/PBQDs into chitosan could effectively prolong the shelf life of foodstuff compared with commercial membrane. The successful implementation of this research provides a new idea for controlling microbial contamination and developing multifunctional antibacterial materials.
Subject(s)
Anti-Bacterial Agents , Food Preservation , Metal-Organic Frameworks , Polyphenols , Quantum Dots , Anti-Bacterial Agents/pharmacology , Anti-Bacterial Agents/chemistry , Polyphenols/chemistry , Polyphenols/pharmacology , Metal-Organic Frameworks/chemistry , Metal-Organic Frameworks/pharmacology , Quantum Dots/chemistry , Food Preservation/methods , Food Preservation/instrumentation , Phosphorus/chemistry , Phosphorus/pharmacology , Food Packaging/instrumentation , Microbial Sensitivity TestsABSTRACT
The chlorophyll skeleton contains a chlorin macrocycle and an annulated fifth (or isocyclic) ring bearing 131-oxo and 132-carbomethoxy substituents. The isocyclic ring has traditionally been constructed by annulation of an intact tetrapyrrole macrocycle. Here, a complementary route employs reaction of a gem-dimethyl-substituted dihydrodipyrrin-carboxaldehyde (AD half) and a dipyrromethane bearing a 3-methoxy-1,3-dioxopropyl group (BC half). A McMurry-like reaction of a 2-(2-nitro-5-oxohexyl)pyrrole was employed to construct the second pyrrole ring in one of three BC halves, whereas the other two were prepared by known routes. An AD half and a BC half were joined by Knoevenagel condensation at room temperature, affording the AD,BC-substituted 2-methoxycarbonyl-2-propenone. The subsequent reaction of three AD, BC-propenones (mixture of Z,E-isomers) in CH3CN containing InCl3 and In(OTf)3 at 80 °C afforded the chlorophyll skeleton as the chloroindium(III) chelate; the reaction proceeds via Nazarov cyclization (to form the isocyclic ring), SEAr (to construct the macrocycle), and 2e-,2H+ oxidation (to give the aromatic chromophore). The absorption spectra of the complexes closely resemble that of chlorophyll a. The present work exploits the nascent isocyclic ring as an anchor for directed assembly of the AD and BC halves, forming both the chlorin macrocycle and the isocyclic ring in a single-flask transformation.
ABSTRACT
Three donor-π conjugated unit-acceptor (D-π-A) type zinc porphyrin sensitizers LX1, LX2 and LX3 bearing meso acrylic acid, α-cyanoacrylic acid, and α-cyanopentadienoic acid, respectively, as the π-bridged acceptors were designed and synthesized for use in dye-sensitized solar cells (DSCs). The interesting role of the cyano group attached to the α position of the acrylic and pentadienoic acid acceptor was investigated. It was shown that even though the introduction of the cyano group and the elongation of the π-bridge can both increase the light-harvesting as indicated by the UV-vis absorption spectra, the relevant cell performance dropped significantly. The photo to power conversion efficiencies (PCEs) of the devices increase in the order of LX1 > LX2 > LX3, with the highest PCE of 6.04% achieved for the LX1-based cell, which bears acrylic acid as the π-bridged acceptor. To further explore the effect of -CN and -CH[double bond, length as m-dash]CH- on the interaction between the absorbed dye and TiO2 substrates, their density of states (DOS) and partial density of states (PDOS), as well as electronic properties were investigated in detail using theoretical calculations. The results suggest that introducing the -CN group into the acceptor and extending the conjugation of the π-bridge have decreased the LUMO levels of the dyes, leading to weak interfacial coupling, low electron injection driving force, low Jsc, and thus poor cell performance.
ABSTRACT
A new lactam acceptor unit, [7,7'-bidithieno[3,2-b:2',3'-d]pyridine]-5,5'(4H,4'H)-dione (BDTP), was developed. A D-A copolymer PThBDTP using BDTP as the acceptor unit and thiophene as the donor unit was synthesized. PThBDTP:PC71BM solar cells gave a decent PCE of 9.13% with a V(oc) of 0.96 V. PThBDTP is one of the few D-A copolymers with PCEs of over 9%.