Cancer in 22q11.2 deletion syndrome: A case report and literature review.

Clinically, the 22q11.2 deletion syndrome (22q11.2DS) is considered the most commonly detected microdeletion syndrome. Hepatoblastoma is the most prevalent malignant liver cancer in childhood. However, cases of hepatoblastoma in children with 22q11.2DS have only been reported in four patients. In this report, we present a-13-year-old male treated at our center due to growth retardation, and later diagnosed with hepatoblastoma. Whole genome sequencing (WGS) identified 22q11.2DS. Chromosomal microarray analysis (CMA) of peripheral blood sample showed a 2.9 Mb deletion of chromosome 22q11.2. While underlying mechanisms remain unclear, our literature review suggests that patients with 22q11.2DS may show an elevated risk of malignancy. After reviewing 21 previously reported cases, we identified 33 individuals with both cancer and 22q11.2 DS or DiGeorge syndrome. Of these cases, 7 out of 33 (21%) were hematologic tumors, while 26 out of 33 (78%) were solid tumors.

Innovative Formulation Platform: Paving the Way for Superior Protein Therapeutics with Enhanced Efficacy and Broadened Applications.

Protein therapeutics offer high therapeutic potency and specificity; the broader adoptions and development of protein therapeutics, however, have been constricted by their intrinsic limitations such as inadequate stability, immunogenicity, suboptimal pharmacokinetics and biodistribution, and off-target effects. This review describes a platform technology that formulates individual protein molecules with a thin formulation layer of crosslinked polymers, which confers the protein therapeutics with high activity, enhanced stability, controlled release capability, reduced immunogenicity, improved pharmacokinetics and biodistribution, and ability to cross the blood brain barriers. Based on currently approved protein therapeutics, this formulating platform affords the development of a vast family of superior protein therapeutics with improved efficacy and broadened indications at significantly reduced cost.

General Fabrication of Robust Alloyed Metal Anodes for High-Performance Metal Batteries.

Revitalizing metal anodes for rechargeable batteries confronts challenges such as dendrite formation, limited cyclicity, and suboptimal energy density. Despite various efforts, a practical fabrication method for dendrite-free metal anodes remains unavailable. Herein, focusing on Li as exemplar, a general strategy is reported to enhance reversibility of the metal anodes by forming alloyed metals, which is achieved by induction heating of 3D substrate, lithiophilic metals, and Li within tens of seconds. It is demonstrated that preferred alloying interactions between substrates and lithiophilic metals created a lithiophilic metal-rich region adjacent to the substrate, serving as ultrastable lithiophilic host to guide dendrite-free deposition, particularly during prolonged high-capacity cycling. Simultaneously, an alloying between lithiophilic metals and Li creates a Li-rich region adjacent to electrolyte that reduces nucleation overpotential and constitutes favorable electrolyte-Li interface. The resultant composite Li anodes paired with high areal loading LiNi0.8Co0.1Mn0.1O2 cathodes achieve superior cycling stability and remarkable energy density above 1200 Wh L-1 (excluding packaging). Furthermore, this approach shows broader applicability to other metal anodes plagued by dendrite-related challenges, such as Na and Zn. Overall, this work paves the way for development of commercially viable metal-based batteries that offer a combination of safety, high energy density, and durability.

Pillarurilarenes: Glycoluril-Expanded Pillararenes.

Glycoluril-expanded pillararenes composed of glycoluril and dialkoxybenzene units, namely, pillarurilarenes (PURA), were synthesized through a fragment coupling macrocyclization strategy. Partial replacement of dialkoxybenzene with glycoluril endows PURA with polarized equatorial methine protons for derivatization or CH-anion binding. Crystal structures of pillar[2]uril[4]arene and pillar[1]uril[4]arene containing two glycoluril units and one glycoluril unit, respectively, indicated the inward orientation of the glycoluril unit, as also suggested by 1H nuclear magnetic resonance and density functional theory calculation. This work lays a good foundation for expanding pillararenes using non-aromatic rings.

Lignin Derived Ultrathin All-Solid Polymer Electrolytes with 3D Single-Ion Nanofiber Ionic Bridge Framework for High Performance Lithium Batteries.

The lignin derived ultrathin all-solid composite polymer electrolyte (CPE) with a thickness of only 13.2 µm, which possess 3D nanofiber ionic bridge networks composed of single-ion lignin-based lithium salt (L-Li) and poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) as the framework, and poly(ethylene oxide)/lithium bis(trifluoromethanesulfonyl)imide (PEO/LiTFSI) as the filler, is obtained through electrospinning/spraying and hot-pressing. t. The Li-symmetric cell assembled with the CPE can stably cycle more than 6000 h under 0.5 mA cm-2 with little Li dendrites growth. Moreover, the assembled Li||CPE||LiFePO4 cells can stably cycle over 700 cycles at 0.2 C with a super high initial discharge capacity of 158.5 mAh g-1 at room temperature, and a favorable capacity of 123 mAh g-1 at -20 °C for 250 cycles. The excellent electrochemical performance is mainly attributed to the reason that the nanofiber ionic bridge network can afford uniformly dispersed single-ion L-Li through electrospinning, which synergizes with the LiTFSI well dispersed in PEO to form abundant and efficient 3D Li+ transfer channels. The ultrathin CPE induces uniform deposition of Li+ at the interface, and effectively inhibit the lithium dendrites. This work provides a promising strategy to achieve ultrathin biobased electrolytes for solid-state lithium ion batteries.

Differential Sampling of AC Waveforms Based on a Commercial Digital-to-Analog Converter for Reference.

This paper introduces an innovative differential sampling technique for calibrating AC waveforms, leveraging a commercially available 16-bit digital-to-analog converter (DAC) as the reference standard. The novelty of this approach lies in its enhanced stability over traditional direct sampling methods, especially as the frequency of the AC waveform increases. Notably, this technique provides a cost-effective sampler alternative to the differential sampling methods that rely on a programmable Josephson voltage standard (PJVS). A critical aspect of this methodology is the precise measurement of the DAC's output voltage, for which a static measurement strategy is adopted to utilize the exceptional linearity and transfer accuracy of the Keysight 3458A (Santa Rosa, CA, USA) in its standard DCV mode. The differential sampling method has demonstrated good accuracy, achieving a near 1 µV/V agreement with a pulse-driven AC Josephson voltage standard (ACJVS) across a 40 Hz to 200 Hz frequency range. The method attained an expanded uncertainty (k = 2) of 1 part in 106 while measuring a 0.707107 VRMS sine wave at 50 Hz, showcasing its efficacy in precise AC waveform calibration.

Engineering Escherichia coli for high-yielding 2,5-Dimethylpyrazine synthesis from L-Threonine by reconstructing metabolic pathways and enhancing cofactors regeneration.

2,5-Dimethylpyrazine (2,5-DMP) is important pharmaceutical raw material and food flavoring agent. Recently, engineering microbes to produce 2,5-DMP has become an attractive alternative to chemical synthesis approach. In this study, metabolic engineering strategies were used to optimize the modified Escherichia coli BL21 (DE3) strain for efficient synthesis of 2,5-DMP using L-threonine dehydrogenase (EcTDH) from Escherichia coli BL21, NADH oxidase (EhNOX) from Enterococcus hirae, aminoacetone oxidase (ScAAO) from Streptococcus cristatus and L-threonine transporter protein (EcSstT) from Escherichia coli BL21, respectively. We further optimized the reaction conditions for synthesizing 2,5-DMP. In optimized conditions, the modified strain can convert L-threonine to obtain 2,5-DMP with a yield of 2897.30 mg/L. Therefore, the strategies used in this study contribute to the development of high-level cell factories for 2,5-DMP.

Two new Erythrobasidium species inhabiting the phyllosphere discovered in the Baotianman Nature Reserve in China.

The genus Erythrobasidium is kind of species-scarce and undersampling basidiomycetes. Currently, only six species have been accepted into the genus and the diversity still remains incompletely understood. In this study, five Erythrobasidium strains were isolated in the surface of plant leaves collected from the Baotianman Nature Reserve, Henan Province, central China. Phylogenetic analyses of the small ribosomal subunit (SSU) rRNA gene, the internal transcribed spacer (ITS) region, the D1/D2 domain of the large subunit (LSU) rRNA gene, and the translation elongation factor 1-α (TEF1-α) gene coupled with morphological studies were employed to characterize and identify these isolates. As a result of these, two new species, namely E. turpiniae sp. nov. and E. nanyangense sp. nov., were delimited and proposed based on morphological and molecular evidence. A detailed description and illustration of both new species, as well as their differences with the close relatives in the genus are provided. An identification key for Erythrobasidium species is also provided. This study provides further insights into our understanding of Erythrobasidium species.

Two new phyllospheric species of Colacogloea (Colacogloeaceae, Pucciniomycotina) identified in China.

During our ongoing survey of basidiomycetous yeasts associated with plant leaves in virgin forest, five Colacogloea strains were isolated in the Baotianman Nature Reserve, Henan Province, central China. Phenotypes from cultures and a phylogeny based on the internal transcribed spacer (ITS) regions and the D1/D2 domains of the large subunit (LSU) rRNA gene were employed to characterize and identify these isolates. As a result, two new species, namely Colacogloeaceltidissp. nov. and C.pararetinophilasp. nov., are introduced herein. In the phylogeny of combined ITS and LSU dataset, the new species C.celtidissp. nov. formed a clade with the unpublished Colacogloea strain (KBP: Y-6832), and together these formed the sister group to C.armeniacae, while C.pararetinophilasp. nov. was retrieved as a sister to C.retinophila. A detailed description and illustration of both new species, as well as the differences between them and their closest relatives in the genus are provided. Results from the present study will add to our knowledge of the biodiversity of Colacogloea in China.

Lactate oxidase nanocapsules boost T cell immunity and efficacy of cancer immunotherapy.

Cancer immunotherapy has reshaped the landscape of cancer treatment. However, its efficacy is still limited by tumor immunosuppression associated with the excessive production of lactate by cancer cells. Although extensive efforts have been made to reduce lactate concentrations through inhibition of lactate dehydrogenase, such inhibitors disrupt the metabolism of healthy cells, causing severe nonspecific toxicity. We report herein a nanocapsule enzyme therapeutic based on lactate oxidase, which reduces lactate concentrations and releases immunostimulatory hydrogen peroxide, averting tumor immunosuppression and improving the efficacy of immune checkpoint blockade treatment. As demonstrated in a murine melanoma model and a humanized mouse model of triple-negative breast cancer, this enzyme therapeutic affords an effective tool toward more effective cancer immunotherapy.

Effect of body mass index (BMI) on image contrast in the hepatobiliary phase of Gd-EOB-DTPA-enhanced-MRI and the feasibility of the application of half-dose Gd-EOB-DTPA to hepatobiliary phase imaging in patients with a BMI less than 24: a comparative study.

Background: Gadolinium-ethoxybenzyl-diethylenetriamine-pentaacetic acid (Gd-EOB-DTPA)-enhanced magnetic resonance imaging (MRI) can detect more lesions through the image contrast of hepatobiliary phase. Body mass index (BMI) reflects the composition ratio of human tissue, which is an influencing factor of magnetic resonance image contrast. Meanwhile, Gd-EOB-DTPA is recommended to use the minimum dose when the diagnosis demands could be met. The aim of this paper was to investigate the effect of BMI on hepatobiliary phase image contrast and explore the feasibility of using low-dose Gd-EOB-DTPA to obtain good hepatobiliary phase image contrast in patients with normal and lean BMI. Methods: Eighty-two patients who had previously undergone Gd-EOB-DTPA-enhanced MRI (0.025 mmol/kg) were collected and divided into group A (BMI <24 kg/m2) and group B (BMI ≥24 kg/m2) according to Chinese BMI standards. Liver-to-portal vein contrast ratio (LPC20) and liver-to-spleen contrast ratio (LSC20) in hepatobiliary phase (20 min after injection) were calculated. Thirty patients with a BMI <24 kg/m2 who were about to receive Gd-EOB-DTPA-enhanced MRI were randomly divided into group C (0.0125 mmol/kg) and group D (0.025 mmol/kg). Image acquisition was performed at 10, 15, and 20 min after injection. LPC10, LPC15, LPC20 and LSC10, LSC15, LSC20 in corresponding phases were calculated. Results: In retrospective grouping study, compared with group B, group A's LPC20 was significantly higher [2.63 (2.42-3.00) vs. 2.22 (1.97-2.67); P<0.01]. In prospective grouping study, there were no differences in LPC15, LSC15, LPC20 and LSC20 between group C and group D. Intragroup comparison in each group showed that LPC15 (group C: 2.67±0.33; group D: 2.61±0.21) and LPC20 (group C: 2.74±0.37; group D: 2.72±0.27) were higher than LPC10 (group C: 2.19±0.18; group D: 1.94±0.17) (all P<0.01), while there were no changes between LPC15 and LPC20. Conclusions: Under conventional dose, hepatobiliary phase image contrast in patients with a BMI <24 was higher, which was mainly manifested in the high LPC. For patients with a BMI <24 kg/m2, using a half conventional dose (0.0125 mmol/kg), good hepatobiliary phase image contrast can still be obtained at 15-20 min after administration.

Poly(ether ether ketone) Conferred Polyolefin Separators with High Dimensional Thermal Stability for Lithium-Ion Batteries.

The traditional polyolefin separators used in lithium-ion batteries (LIBs) are plagued by limitations such as poor wetting of electrolytes and insufficient thermal stability, hindering the progress of LIBs. To overcome these limitations, we have developed a modified phase inversion technique to efficiently and durably coat polyolefin separators with poly(ether ether ketone) (PEEK). The resulting PEEK-coated polyolefin separators exhibit mechanical properties similar to those of unmodified polyolefin separators, with comparable tensile strength and modulus. Furthermore, the PEEK coating provides outstanding thermal stability, as the modified separators maintain their stability even at temperatures up to 200 °C, which is among the best results reported for polyolefin-based separators. In addition, the PEEK coating enhances ionic conductivity by more than 100% compared to polyolefin counterparts, leading to significant improvement in the electrochemical performance of prototype half cells. The modified phase inversion technique presented here offers a practical solution for coating polyolefin separators with functional polymers, paving the way for next-generation separator materials.

PAF-6 Doped with Phosphoric Acid through Alkaline Nitrogen Atoms Boosting High-Temperature Proton-Exchange Membranes for High Performance of Fuel Cells.

High-temperature proton-exchange-membrane fuel cells (HT-PEMFCs) can offer improved energy efficiency and tolerance to fuel/air impurities. The high expense of the high-temperature proton-exchange membranes (HT-PEMs) and their low durability at high temperature still impede their further practical applications. In this work, a phosphoric acid (PA)-doped porous aromatic framework (PAF-6-PA) is incorporated into poly[2,2'-(p-oxydiphenylene)-5,5'-benzimidazole] (OPBI) to fabricate novel PAF-6-PA/OPBI composite HT-PEMs through solution-casting. The alkaline nitrogen structure in PAF-6 can be protonated with PA to provide proton hopping sites, and its porous structure can enhance the PA retention in the membranes, thus creating fast pathways for proton transfer. The hydrogen bond interaction between the rigid PAF-6 and OPBI can also enhance the mechanical properties and chemical stability of the composite membranes. Consequently, PAF-6-PA/OPBI exhibits an optimal proton conductivity of 0.089 S cm-1 at 200 °C, and peak power density of 437.7 mW cm-2 (Pt: 0.3 mg cm-2 ), which is significantly higher than that of the OPBI.   The PAF-6-PA/OPBI provides a novel strategy for the practical application of PBI-based HT-PEMs.

Macrocycle with Equatorial Coordination Sites Provides New Opportunity for Structure-Diverse Metallacages.

Reported here is the synthesis of a macrocycle with equatorial coordination sites for the construction of self-assembled metallacages. The macrocycle is prepared via a post-modification on the equator of biphen[n]arene. Utilizing this macrocycle as a ligand, three prismatic cages and one octahedral cage were synthesized by regulating the geometric structures and coordination number of metal acceptors. The multi-cavity configuration of prismatic cage was revealed by single-crystal structure. We prove that a macrocycle with equatorial coordination sites can be an excellent building block for synthesizing structure-diverse metallacages. Our results provide a typical example and a general method for the design and synthesis of metallacages.

Contactless Real-Time Heart Rate Predicts the Performance of Elite Athletes: Evidence From Tokyo 2020 Olympic Archery Competition.

It is widely recognized that psychological stress impairs performance for elite athletes, yet direct evidence is scarce when it comes to high-stakes competition because measuring real-time psychological stress without interference is often challenging. Contactless real-time heart rate-a technology-enabled biomarker of stress-was measured and broadcast on TV during the 2020 Tokyo Olympics archery competition for the first time in sports. Here we examined whether the real-time heart rate of 122 adult archers predicted their performance in this unique setting. We found that higher heart rate-which indicates an increase in psychological stress-is associated with lower scores, correlation coefficient r(2096) = -.076, p < .001, and the observation is robust after we controlled for fixed effects at the individual and match level. Our results provide the first direct evidence in support of the detrimental effect of psychological stress measured by a real-time biomarker in a high-stakes competitive setting.

Glutathione-Responsive Nanoparticles of Camptothecin Prodrug for Cancer Therapy.

Camptothecin (CPT) is a potent chemotherapeutic agent for various cancers, but the broader application of CPT is still hindered by its poor bioavailability and systemic toxicity. Here, a prodrug that releases CPT in response to glutathione (GSH), which is commonly overexpressed by cancer cells is reported. Through assembling with PEGylated lipids, the prodrug is incorporated within as-assembled nanoparticles, affording CPT with a prolonged half-life in blood circulation, enhanced tumor targetingability, and improved therapeutic efficacy. Furthermore, such prodrug nanoparticles can also promote dendritic cell maturation and tumor infiltration of CD8+ T cells, providing a novel strategy to improve the therapeutic efficacy of CPT.

Inflammation-related Gene Polymorphisms Associated With Childhood Acute Lymphoblastic Leukemia.

BACKGROUND: Acute lymphoblastic leukemia (ALL) is a malignant hematological disease and is often accompanied by a variety of genetic abnormalities. The pathogenesis of inflammation-related single-nucleotide polymorphism (SNP) in children with ALL remains unclear. OBJECTIVE: This study was to discover the association of the SNP sites of some inflammation-related genes and the susceptibility and treatment response of ALL in children, so as to provide personalized treatment for ALL in children. PROCEDURE: One hundred sixty-five childhood ALL patients and 175 age-matched healthy participants were recruited in this study. We investigated the involvement of 31 SNPs of the inflammation-related genes in the pathogenesis and treatment response of childhood ALL. RESULTS: Statistical analysis revealed that rs2280714 in IRF5, rs2297630 in SDF-1, rs4353135 in NLRP3, rs1946518 in interleukin-18 were related to the susceptibility to pediatric ALL. Interleukin-1ß rs16944 SNP was correlated with ALL risk stage in children. Rs7633631 in CD226 and rs10818488 in TRAF1 were related to the minimal residual disease (MRD) on day 15 and day 33. CONCLUSIONS: Certain SNPs of inflammation genes were associated with the susceptibility and treatment response of ALL children. These findings may help in the early detection, diagnostic evaluation, and making individual chemotherapy regimen for ALL children according to the genotype of these sites at the time of initial diagnosis.

Rapid prototyping of functional acoustic devices using laser manufacturing.

Acoustic patterning of micro-particles has many important biomedical applications. However, fabrication of such microdevices is costly and labor-intensive. Among conventional fabrication methods, photo-lithography provides high resolution but is expensive and time consuming, and not ideal for rapid prototyping and testing for academic applications. In this work, we demonstrate a highly efficient method for rapid prototyping of acoustic patterning devices using laser manufacturing. With this method we can fabricate a newly designed functional acoustic device in 4 hours. The acoustic devices fabricated using this method can achieve sub-wavelength, complex and non-periodic patterning of microparticles and biological objects with a spatial resolution of 60 µm across a large active manipulation area of 10 × 10 mm2.

Frequency-modulated continuous waves controlled by space-time-coding metasurface with nonlinearly periodic phases.

The rapid development of space-time-coding metasurfaces (STCMs) offers a new avenue to manipulate spatial electromagnetic beams, waveforms, and frequency spectra simultaneously with high efficiency. To date, most studies are primarily focused on harmonic generations and independent controls of finite-order harmonics and their spatial waves, but the manipulations of continuously temporal waveforms that include much rich frequency spectral components are still limited in both theory and experiment based on STCM. Here, we propose a theoretical framework and method to generate frequency-modulated continuous waves (FMCWs) and control their spatial propagation behaviors simultaneously via a novel STCM with nonlinearly periodic phases. Since the carrier frequency of FMCW changes with time rapidly, we can produce customized time-varying reflection phases at will by the required FMCW under the illumination of a monochromatic wave. More importantly, the propagation directions of the time-varying beams can be controlled by encoding the metasurface with different initial phase gradients. A programmable STCM prototype with a full-phase range is designed and fabricated to realize reprogrammable FMCW functions, and experimental results show good agreement with the theoretical analyses.