ABSTRACT
Achievement of a stable surface coating with long-term resistance to biofilm formation remains a challenge. Catechol-based polymerization chemistry and surface deposition are used as tools for surface modification of diverse materials. However, the control of surface deposition of the coating, surface coverage, coating properties, and long-term protection against biofilm formation remain to be solved. We report a new approach based on supramolecular assembly to generate long-acting antibiofilm coating. Here, we utilized catechol chemistry in combination with low molecular weight amphiphilic polymers for the generation of such coatings. Screening studies with diverse low molecular weight (LMW) polymers and different catechols are utilized to identify lead compositions, which resulted in a thick coating with high surface coverage, smoothness, and antibiofilm activity. We have identified that small supramolecular assemblies (â¼10 nm) formed from a combination of polydopamine and LMW poly(N-vinyl caprolactam) (PVCL) resulted in relatively thick coating (â¼300 nm) with excellent surface coverage in comparison to other polymers and catechol combinations. The coating properties, such as thickness (10-300 nm) and surface hydrophilicity (with water contact angle: 20-60°), are readily controlled. The optimal coating composition showed excellent antibiofilm properties with long-term (>28 days) antibiofilm activity against both Gram-negative (Escherichia coli) and Gram-positive (Staphylococcus aureus) strains. We further utilized the combination of optimal binary coating with silver to generate a coating with sustained release of silver ions, resulting in killing both adhered and planktonic bacteria and preventing long-term surface bacterial colonization. The new coating method utilizing LMW polymers opens a new avenue for the development of a novel class of thick, long-acting antibiofilm coatings.
Subject(s)
Biofilms , Catechols , Polymers , Staphylococcus aureus , Biofilms/drug effects , Catechols/chemistry , Catechols/pharmacology , Polymers/chemistry , Polymers/pharmacology , Staphylococcus aureus/drug effects , Staphylococcus aureus/physiology , Molecular Weight , Surface Properties , Anti-Bacterial Agents/pharmacology , Anti-Bacterial Agents/chemistry , Coated Materials, Biocompatible/chemistry , Coated Materials, Biocompatible/pharmacologyABSTRACT
Polymer-mediated cell surface engineering can be a powerful tool to modify the cell's biological behavior, but a simple ligation strategy must be identified. This manuscript assessed the use of transglutamination as a versatile and adaptable approach for cell surface engineering in various cellular models relevant to biomedical applications. This enzymatic approach was evaluated for its feasibility and potential for conjugating polymers to diverse cell surfaces and its biological effects. Transglutaminase-mediated ligation was successfully performed at temperatures ranging from 4 to 37 °C in as quickly as 30 min, while maintaining biocompatibility and preserving cell viability. This approach was successfully applied to nine different cell surfaces (including adherent cells and suspension cells) by optimizing the enzyme source (guinea pig liver vs microbial), buffer compositions, and incubation conditions. Finally, polymer-mediated cell surface engineering using transglutaminase exhibited immunocamouflage abilities for endothelial cells, T cells, and red blood cells by preventing the recognition of cell surface proteins by antibodies. Employing transglutaminase in polymer-mediated cell surface engineering is a promising approach to maximize its application in cell therapy and other biomedical applications.
Subject(s)
Polymers , Transglutaminases , Animals , Guinea Pigs , Polymers/metabolism , Transglutaminases/metabolism , Endothelial Cells/metabolism , Cell Membrane/metabolism , Cell EngineeringABSTRACT
Current treatments to prevent thrombosis, namely anticoagulants and platelets antagonists, remain complicated by the persistent risk of bleeding. Improved therapeutic strategies that diminish this risk would have a huge clinical impact. Antithrombotic agents that neutralize and inhibit polyphosphate (polyP) can be a powerful approach towards such a goal. Here, we report a design concept towards polyP inhibition, termed macromolecular polyanion inhibitors (MPI), with high binding affinity and specificity. Lead antithrombotic candidates are identified through a library screening of molecules which possess low charge density at physiological pH but which increase their charge upon binding to polyP, providing a smart way to enhance their activity and selectivity. The lead MPI candidates demonstrates antithrombotic activity in mouse models of thrombosis, does not give rise to bleeding, and is well tolerated in mice even at very high doses. The developed inhibitor is anticipated to open avenues in thrombosis prevention without bleeding risk, a challenge not addressed by current therapies.
Subject(s)
Drug-Related Side Effects and Adverse Reactions , Thrombosis , Mice , Animals , Fibrinolytic Agents/pharmacology , Fibrinolytic Agents/therapeutic use , Ligands , Thrombosis/drug therapy , Thrombosis/prevention & control , Anticoagulants/adverse effects , Hemorrhage/chemically induced , Hemorrhage/prevention & control , Hemorrhage/drug therapy , Platelet Aggregation Inhibitors/pharmacology , Platelet Aggregation Inhibitors/therapeutic useABSTRACT
A major medical device-associated complication is the biofilm-related infection post-implantation. One promising approach to prevent this is to coat already commercialized medical devices with effective antibiofilm materials. However, developing a robust high-performance antibiofilm coating on devices with a nonflat geometry remains unmet. Here, we report the development of a facile scalable nanoparticle-based antibiofilm silver composite coating with long-term activity applicable to virtually any objects including difficult-to-coat commercially available medical devices utilizing a catecholic organic-aqueous mixture. Using a screening approach, we have identified a combination of the organic-aqueous buffer mixture which alters polycatecholamine synthesis, nanoparticle formation, and stabilization, resulting in controlled deposition of in situ formed composite silver nanoparticles in the presence of an ultra-high-molecular-weight hydrophilic polymer on diverse objects irrespective of its geometry and chemistry. Methanol-mediated synthesis of polymer-silver composite nanoparticles resulted in a biocompatible lubricious coating with high mechanical durability, long-term silver release (â¼90 days), complete inhibition of bacterial adhesion, and excellent killing activity against a diverse range of bacteria over the long term. Coated catheters retained their excellent activity even after exposure to harsh mechanical challenges (rubbing, twisting, and stretching) and storage conditions (>3 months stirring in water). We confirmed its excellent bacteria-killing efficacy (>99.999%) against difficult-to-kill bacteria (Proteus mirabilis) and high biocompatibility using percutaneous catheter infection mice and subcutaneous implant rat models, respectively, in vivo. The developed coating approach opens a new avenue to transform clinically used medical devices (e.g., urinary catheters) to highly infection-resistant devices to prevent and treat implant/device-associated infections.
ABSTRACT
The long-term prevention of biofilm formation on the surface of indwelling medical devices remains a challenge. Silver has been reutilized in recent years for combating biofilm formation due to its indisputable bactericidal potency; however, the toxicity, low stability, and short-term activity of the current silver coatings have limited their use. Here, we report the development of silver-based film-forming antibacterial engineered (SAFE) assemblies for the generation of durable lubricous antibiofilm surface long-term activity without silver toxicity that was applicable to diverse materials via a highly scalable dip/spray/solution-skinning process. The SAFE coating was obtained through a large-scale screening, resulting in effective incorporation of silver nanoparticles (â¼10 nm) into a stable nonsticky coating with high surface hierarchy and coverage, which guaranteed sustained silver release. The lead coating showed zero bacterial adhesion over a 1 month experiment in the presence of a high load of diverse bacteria, including difficult-to-kill and stone-forming strains. The SAFE coating showed high biocompatibility and excellent antibiofilm activity in vivo.
ABSTRACT
Host defense peptides (HDPs) have been the subject of great interest for the treatment of multidrug-resistant bacterial infections due to their multimodal activity and low induction of resistance. However, aggregation, toxicity, and short biological half-life have limited their applicability for clinical treatment. Many methods have been explored to alleviate these issues, such as polymer (e.g., polyethylene glycol (PEG)) conjugation, but these are often accompanied by reductions in the activity of the HDP. Here, we detail the design of a novel PEG-HDP conjugate incorporating an enzymatic cleavage sequence targeting matrix metalloproteinases (MMPs) that accumulate at sites of inflammation and infection. Addition of the cleavage sequence onto either the N- or the C-terminal region of the parent peptide (peptide 73, a derivative of the HDP aurein 2.2) was explored to determine the location for optimal antimicrobial activity following MMP cleavage; furthermore, the susceptibility of the peptide to MMP cleavage after conjugation to 2 kDa or 5 kDa PEG was examined. The top candidate, L73, utilized an N-terminal cleavage site that was subsequently conjugated to a 2 kDa PEG polymer. Both L73 and the conjugate exhibited no antimicrobial activity in vitro until cleaved by purified MMP, which liberated a peptide fragment with 16- or 63-fold improved activity, respectively, corresponding to a minimum inhibitory concentration (MIC) of 8 µg/mL, comparable to that of peptide 73 (4 µg/mL). Furthermore, PEG conjugation improved the blood compatibility and reduced the aggregation tendency of the HDP in vitro, indicating enhanced biocompatibility. When administered as a single subcutaneous dose (~3.6 mg, or a peptide concentration of 142 mg/kg) in a mouse abscess model of high-density methicillin-resistant Staphylococcus aureus (MRSA) infection, the conjugate displayed strong activity, reducing abscess size and bacterial load by 73.3% and 58-fold, respectively. This activity was completely lost when the cleavage site was rendered resistant to MMPs by the substitution of two d-amino acids, supporting the hypothesis that antimicrobial activity was dependent on cleavage by MMPs, which were shown here to increasingly accumulate at the abscess site up to 18 h post infection. Finally, the conjugate displayed biocompatibility in vivo, with no identifiable toxicity or aggregation.
Subject(s)
Antimicrobial Cationic Peptides , Methicillin-Resistant Staphylococcus aureus , Animals , Drug Resistance, Multiple, Bacterial , Mice , Microbial Sensitivity Tests , Polyethylene GlycolsABSTRACT
The current study reports the use of small amplitude oscillatory rheometry to investigate the dynamics of blood clot formation upon heparin neutralization under three different oscillatory frequencies, two of which were mimicking physiological heart rates. We utilized two different heparin antidotes, namely protamine and newly developed universal heparin reversal agent (UHRA-7), at different concentrations to determine the quality of blood clot formed upon heparin neutralization by analyzing several key rheological parameters. Scanning electron microscopy (SEM) was used to determine the morphology and microstructure of the blood clot after heparin neutralization to support the rheological observations. The current study revealed that the structure of blood clots formed had significant differences when an oscillatory frequency that mimicked the physiological heart rate was used in comparison to a lower frequency commonly used in current clinical measurements. The limited working dose range for protamine and its intrinsic anticoagulation behaviour was observed. The neutralization profile of UHRA-7 showed a large window of activity. The global assessment of rheological parameters and microstructure of the clot together revealed additional details describing anticoagulant reversal and blood coagulation dynamics by relating the blood clot's fiber thickness and the oscillatory measurements, including storage modulus and blood clot's contractile force. Additionally, a mechanical characterization was conducted to provide a further assessment of blood coagulation using the rheological data.
Subject(s)
Protamines , Thrombosis , Anticoagulants/pharmacology , Blood Coagulation , Heparin/pharmacology , Humans , Protamines/pharmacologyABSTRACT
Systemic immunosuppression for the mitigation of immune rejection after organ transplantation causes adverse side effects and constrains the long-term benefits of the transplanted graft. Here we show that protecting the endothelial glycocalyx in vascular allografts via the enzymatic ligation of immunosuppressive glycopolymers under cold-storage conditions attenuates the acute and chronic rejection of the grafts after transplantation in the absence of systemic immunosuppression. In syngeneic and allogeneic mice that received kidney transplants, the steric and immunosuppressive properties of the ligated polymers largely protected the transplanted grafts from ischaemic reperfusion injury, and from immune-cell adhesion and thereby immunocytotoxicity. Polymer-mediated shielding of the endothelial glycocalyx following organ procurement should be compatible with clinical procedures for transplant preservation and perfusion, and may reduce the damage and rejection of transplanted organs after surgery.
Subject(s)
Glycocalyx , Graft Rejection , Allografts , Animals , Graft Rejection/prevention & control , Immunosuppressive Agents , Mice , PolymersABSTRACT
Bacterial adhesion and the succeeding biofilm formation onto surfaces are responsible for implant- and device-associated infections. Bifunctional coatings integrating both nonfouling components and antimicrobial peptides (AMPs) are a promising approach to develop potent antibiofilm coatings. However, the current approaches and chemistry for such coatings are time-consuming and dependent on substrates and involve a multistep process. Also, the information is limited on the influence of the coating structure or its components on the antibiofilm activity of such AMP-based coatings. Here, we report a new strategy to rapidly assemble a stable, potent, and substrate-independent AMP-based antibiofilm coating in a nonfouling background. The coating structure allowed for the screening of AMPs in a relevant nonfouling background to identify optimal peptide combinations that work in cooperation to generate potent antibiofilm activity. The structure of the coating was changed by altering the organization of the hydrophilic polymer chains within the coatings. The coatings were thoroughly characterized using various surface analytical techniques and correlated with the efficiency to prevent biofilm formation against diverse bacteria. The coating method that allowed the conjugation of AMPs without altering the steric protection ability of hydrophilic polymer structure results in a bifunctional surface coating with excellent antibiofilm activity. In contrast, the conjugation of AMPs directly to the hydrophilic polymer chains resulted in a surface with poor antibiofilm activity and increased adhesion of bacteria. Using this coating approach, we further established a new screening method and identified a set of potent surface-tethered AMPs with high activity. The success of this new peptide screening and coating method is demonstrated using a clinically relevant mouse infection model to prevent catheter-associated urinary tract infection (CAUTI).
Subject(s)
Anti-Bacterial Agents/pharmacology , Antimicrobial Cationic Peptides/pharmacology , Biofouling/prevention & control , Coated Materials, Biocompatible/pharmacology , Immobilized Proteins/pharmacology , Acrylamides/chemistry , Animals , Anti-Bacterial Agents/chemical synthesis , Antimicrobial Cationic Peptides/chemical synthesis , Catheters/microbiology , Coated Materials, Biocompatible/chemical synthesis , Humans , Immobilized Proteins/chemical synthesis , Indoles/chemistry , Male , Mice, Inbred BALB C , Polymers/chemistry , Pseudomonas aeruginosa/drug effects , Pseudomonas aeruginosa/physiology , Staphylococcus saprophyticus/drug effects , Staphylococcus saprophyticus/physiology , Urinary Tract Infections/prevention & controlABSTRACT
The endothelial glycocalyx is a dynamic structure integral to blood vessel hemodynamics and capable of tightly regulating a range of biological processes (ie, innate immunity, inflammation, and coagulation) through dynamic changes in its composition of the brush structure. Evaluating the specific roles of the endothelial glycocalyx under a range of pathophysiologic conditions has been a challenge in vitro as it is difficult to generate functional glycocalyces using commonly employed 2D cell culture models. We present a new multi-height microfluidic platform that promotes the growth of functional glycocalyces by eliciting unique shear stress forces over a continuous human umbilical vein endothelial cell monolayer at magnitudes that recapitulate the physical environment in arterial, capillary and venous regions of the vasculature. Following 72 hours of shear stress, unique glycocalyx structures formed within each region that were distinct from that observed in short (3 days) and long-term (21 days) static cell culture. The model demonstrated glycocalyx-specific properties that match the characteristics of the endothelium in arteries, capillaries and veins, with respect to surface protein expression, platelet adhesion, lymphocyte binding and nanoparticle uptake. With artery-to-capillary-to-vein transition on a continuous endothelial monolayer, this in vitro platform is an improved system over static cell culture for more effectively studying the role of the glycocalyx in endothelial biology and disease.