Stability of maxillary expansion osteotomy using patient-specific fixation implants without necessitating removable appliances: a retrospective analysis.

OBJECTIVE: This study aimed to evaluate the long-term stability of surgical maxillary expansion using patient-specific fixation implants (PSFIs) without intraoral retention. MATERIALS AND METHODS: Fifteen patients who had undergone segmented Le Fort I osteotomy and PSFIs with available preoperative (t0) early (t1) and 1-year follow-up computed tomography (CT) scans (t2) were evaluated. The early and 1-year 3D models were superimposed to transfer the bony landmarks; the distances between each pair of landmarks at the different time points were then measured. The distances between the canines and second molars were also measured directly on the CT scans. RESULTS: The achieved maxillary expansions ranged from a median of 4.39 (2.00-6.27) mm at the greater palatine foramina to a median of 2.14 (1.56-2 > 83) mm at the canine level of the palatal bone. One year postoperatively, the changes in skeletal diameters ranged from a median of - 0.53 (- 1.65 to 0.41) mm at the greater palatine foramina (p = 0.12) to 0.17 (- 0.09 to 0.32) mm at the canine level of the palatal bone (p = 0.56). Changes in dental arch diameters ranged from a median of - 0.6 (- 2 to 0.00) mm between the second molars to - 1.3 (- 1.8 to - 0.25) mm between the canines (P < 0.05). CONCLUSION: This study showed the stability of maxillary expansion osteotomy using PSFIs, even without postoperative intraoral retention. CLINICAL RELEVANCE: PSFIs are a reliable method for the surgical treatment of transverse maxillary discrepancy. PFSIs are easy-to-use and improve surgical accuracy.

In-house 3D printing: Why, when, and how? Overview of the national French good practice guidelines for in-house 3D-printing in maxillo-facial surgery, stomatology, and oral surgery.

3D-printing is part of the daily practice of maxillo-facial surgeons, stomatologists and oral surgeons. To date, no French health center is producing in-house medical devices according to the new European standards. Based on all the evidence-based data available, a group of experts from the French Society of Stomatology, Maxillo-Facial Surgery and Oral Surgery (Société Française de Chirurgie Maxillofaciale, Stomatologie et Chirurgie Orale, SFSCMFCO), provide good practice guidelines for in-house 3D-printing in maxillo-facial surgery, stomatology, and oral surgery. Briefly, technical considerations related to printers and CAD software, which were the main challenges in the last ten years, are now nearly trivial questions. The central current issues when planning the implementation of an in-house 3D-printing platform are economic and regulatory. Successful in-house 3D platforms rely on close collaborations between health professionals and engineers, backed by regulatory and logistic specialists. Several large-scale academic projects across France will soon provide definitive answers to governance and economical questions related to the use of in-house 3D printing.

Do mandibular miniplates increase the risk of complex fracture in facial trauma recurrence? Case series.

Whether to conserve or remove miniplates, widely used in oral and maxillofacial surgery, has not been agreed on in the literature. Complications such as pain, infection, and screw exposure or loosening have already been largely described. We present the consequences of a trauma recurrence on a mandible with miniplates. The data of 13 patients who had a mandibular fracture previously surgically treated with miniplates (ten mandibular fractures and three mandibular osteotomies) were analysed. All the patients were male; the average age was 32 years (range, 20-64 years). The mechanism of the second trauma was assault in most of the cases. The average time between the first osteosynthesis and the new fracture was 35 months (range, 6-128 months). The fractures occurred at a distance from the miniplates in all the cases except two. No plate fracture was reported. We hypothesised that miniplates reinforced the underlying bone, protecting it from fractures, and transmitted the forces to areas anterior or posterior to the miniplates or to the condyle. Thus, the risk of mandible trauma recurrence should be taken into account in the indication of plate removal, and the biomechanical consequences of the conservation of the miniplates should be studied.

Impact of intraoperative cone beam computed tomography in the management of zygomatic fractures.

AIM: To evaluate the impact of intraoperative cone beam computed tomography (CBCT) assessment for the surgical management of zygomatic bone fracture (ZF). METHODS: A prospective study was conducted on patients operated on for unilateral ZF during a two-year period. Repositioning of the fractured zygoma was assessed intraoperatively by measuring the position of malar eminences in three dimensions on CBCT. A difference of more than 2 mm between both sides was considered significant and the reduction was judged inadequate. Surgical procedure was adapted to intraoperative imaging findings. RESULTS: The surgical procedures of 47 patients treated for ZF were analyzed. In 15% of the cases (7 patients), the intraoperative CBCT showed an inadequate reduction while the morphological results seemed correct. Those patients benefited from an immediate correction of the reduction. From these 7 patients, reduction was optimized further without the need of osteosynthesis in one case, additional osteosynthesis was performed in 4 cases and 2 patients required both reduction and osteosynthesis revision. CONCLUSION: Intraoperative CBCT control helps to achieve anatomic repositioning in case of ZF. It may reduce the risk of under-treatment and possible reoperation, and of over-treatment meaning systematic ORIF in all fractures.

Prediction of Post-Traumatic Enophthalmos Based on Orbital Volume Measurements: A Systematic Review.

PURPOSE: Enophthalmos greater than 2 mm should be considered clinically relevant and can be responsible for esthetic and functional morbidity. The difficulty has always been the best method to use to accurately determine when the orbital wall displacement will lead to clinically relevant enophthalmos. None of the currently used techniques is able to accurately predict for post-traumatic enophthalmos (PE). The aim of the present study was to systematically review the use of orbital volumetric tools in the prediction of PE after orbital fracture. MATERIALS AND METHODS: The terms searched in each database were "(orbital volumetry) and enophthalmos," "volumetry and enophthalmos," "volume and enophthalmos," and "volumetric and enophthalmos." The relationship between PE and the orbital volume (OV) was assessed. RESULTS: The initial search yielded 346 results. Of the 346 studies, 14 were included and analyzed. Every study reported a different numerical relationship between the OV and PE, with a mean enophthalmos of 0.80 mm after a 1-cm3 increase in the OV. CONCLUSIONS: The present review found that most studies concluded that a direct relationship exists between the OV and PE and defined the degree of PE in relation to the OV expansion. Enophthalmos assessment using radiologic evaluation provides increased accuracy and reproducibility compared with clinical measurement using an exophthalmometer. It has been notoriously difficult to determine when orbital wall displacement will lead to clinically relevant enophthalmos. Measurement of the OV could have a role in the decision for surgical or conservative treatment.

Standard and Customized Alloplastic Facial Implants Refining Orthognathic Surgery: Outcome Evaluation.

PURPOSE: Conventional orthognathic osteotomies provide appropriate functional outcomes but might be unable to correct midface deficiency, achieve a satisfactory outcome in asymmetrical cases, or allow sufficient chin advancement. We evaluated the outcome of both standard and customized facial high-density porous polyethylene implants used to refine the cosmetic outcome of orthognathic surgery. PATIENTS AND METHODS: We implemented a retrospective study. The sample was composed of all patients who underwent facial alloplastic augmentation between June 2011 and October 2018 in our department. The complication rate was recorded after a mean follow-up period of 41 months postoperatively, and patient satisfaction was assessed through a qualitative evaluation based on an 11-item questionnaire. RESULTS: The sample was composed of 24 implants placed in 14 patients: 13 mandibular angle implants, among which 4 were customized; 8 malar implants; and 3 chin implants. No physical complications such as hematoma, infection, migration, or hypoesthesia were observed. Two implants had to be removed because of early unsatisfactory esthetic outcomes. Of 14 patients, 11 answered our questionnaire. Eighty-two percent strongly agreed that the overall outcome was satisfactory. CONCLUSIONS: The results of this study confirm the low physical complication rate described in the literature, and the esthetic complication rate remains lower than the rates observed in previous reports. A high satisfaction rate was found among patients. The lowest mean satisfaction score was noted for appropriate implant symmetry (3.5), whereas the highest mean satisfaction score (3.8) was achieved when using customized implants. If standard high-density porous polyethylene implants appear to be relevant adjuncts to orthognathic surgery, customized implants seem to achieve higher satisfaction, although their prohibitive cost should be considered.

Dental and maxillofacial features of Noonan Syndrome: Case series of ten patients.

Noonan syndrome (NS) is a relatively common congenital multiple-anomaly syndrome, resembling Turner syndrome, but without chromosomal anomaly. Besides the unusual facies, the maxillofacial and dental features of patients with NS are not well-summarized in the literature. The aim of this study was to describe these features and propose specific treatment guidelines for practitioners involved in oral and maxillofacial care. A retrospective multicentric study was conducted of 14 patients who were referred for NS screening. In total, 10 patients were found to carry a mutation involved in NS or NS-related disorders. Fifty percent of the mutations affected PTPN11. All patients presented with the typical extraoral features, such as macrocephaly, hypertelorism, ptosis, triangular face shape and ear dystrophy. Intraoral manifestations, including malocclusion (maxillary transversal deficiency, crossbite, anterior open-bite and class II malocclusion), dental anomalies (delayed eruption, agenesis and dystrophy, odontoma) and radiologic jaw lesions were identified in five out of 10 patients. These findings were searched in a review of the literature to obtain a comprehensive description of oral and maxillofacial features in patients with NS. The proposed treatment guidelines emphasize frequent coagulation anomalies that need to be considered prior to surgery. Early dental assessment and yearly follow-up with oral prophylaxis are recommended. Orthodontics and orthognathic surgery are also of primary importance in the management of NS patients.

Retrieving a displaced third molar from the infratemporal fossa: case report of a minimally invasive procedure.

BACKGROUND: The appropriate management of postoperative complication of wisdom teeth removal is of utmost importance as it can result in legal procedures. The accidental displacement of a maxillary third molar in the infratemporal fossa (ITF), is a rare complication that can occur even with experienced surgeons. The numerous retrieval techniques reported are invasive and provide an unpredictable access. Our aim was to achieve the safe and swift retrieval of the tooth displaced to an area of such complex anatomy. CASE PRESENTATION: We describe the case of a 17-year-old female patient whose right upper third molar was accidentally pushed upward to the ITF and became unreachable. Retrieval based on interventional radiology using the CT-guided placement of a bone trocar above the displaced tooth was successfully performed. The postoperative course was uneventful. CONCLUSIONS: CT scan assisted interventional radiology provides both, real-time assessment of the tooth position through image refreshment, and steady stabilization of the displaced tooth. Therefore, it allows a safe and non-traumatic retrieval with a time-efficient procedure achieved through a minimally-invasive approach with inconspicuous scaring. We believe that such a procedure is an interesting treatment option for optimal outpatient care. To our knowledge, no such case has been previously described.

Polymer-Based Instructive Scaffolds for Endodontic Regeneration.

The challenge of endodontic regeneration is modulated by clinical conditions which determine five kinds of tissue requirements: pulp connective-tissue formation, dentin formation, revascularization, reinnervation and radicular edification. Polymer scaffolds constitute keystone of the different endodontic regenerative strategies. Indeed, scaffolds are crucial for carrying active molecules and competent cells which optimize the regeneration. Hydrogels are very beneficial for controlling viscosity and porosity of endodontic scaffolds. The nanofibrous and microporous scaffolds mimicking extracellular matrix are also of great interest for promoting dentin-pulp formation. Two main types of polymer scaffolds are highlighted: collagen and fibrin. Collagen scaffolds which are similar to native pulp tissue, are adequate for pulp connective tissue formation. Functionnalization by active biomolecules as BMP, SDF-1, G-CSF enhances their properties. Fibrin or PRF scaffolds present the advantage of promoting stem cell differentiation and concomitant revascularisation. The choice of the type of polymers (polypeptide, PCL, chitosan) can depend on its ability to deliver the active biomolecule or to build as suitable hydrogel as possible. Since 2010s, proposals to associate different types of polymers in a same scaffold have emerged for adding advantages or for offsetting a disadvantage of a polymer. Further works would study the synergetic effects of different innovative polymers composition.

Stensen duct dilation: Case series of minimally invasive treatment.

Stensen's duct dilation is a rare condition characterized by a global or partial idiopathic dilation of the Stensen duct. Affected individuals usually show either aesthetically compromised features, such as a tubular-shaped swelling in the cheek, or with mildly painful inflammatory episodes. Three women between ages 61 and 67 years were diagnosed with Stensen duct dilation after sialo-magnetic resonance imaging (MRI). They were treated with botulinum toxin A (BTX-A). Our preliminary results suggest that BTX-A was efficient as a suspensive treatment. BTX-A should remain a first-line treatment of the early silent symptoms of Stensen duct dilation, such as swelling and aesthetic issues. The use of BTX-A avoids more serious procedures and further complications.

A New Software Suite in Orthognathic Surgery : Patient Specific Modeling, Simulation and Navigation.

Orthognathic surgery belongs to the scope of maxillofacial surgery. It treats dentofacial deformities consisting in discrepancy between the facial bones (upper and lower jaws). Such impairment affects chewing, talking, and breathing and can ultimately result in the loss of teeth. Orthognathic surgery restores facial harmony and dental occlusion through bone cutting, repositioning, and fixation. However, in routine practice, we face the limitations of conventional tools and the lack of intraoperative assistance. These limitations occur at every step of the surgical workflow: preoperative planning, simulation, and intraoperative navigation. The aim of this research was to provide novel tools to improve simulation and navigation. We first developed a semiautomated segmentation pipeline allowing accurate and time-efficient patient-specific 3D modeling from computed tomography scans mandatory to achieve surgical planning. This step allowed an improvement of processing time by a factor of 6 compared with interactive segmentation, with a 1.5-mm distance error. Next, we developed a software to simulate the postoperative outcome on facial soft tissues. Volume meshes were processed from segmented DICOM images, and the Bullet open source mechanical engine was used together with a mass-spring model to reach a postoperative simulation accuracy <1 mm. Our toolset was completed by the development of a real-time navigation system using minimally invasive electromagnetic sensors. This navigation system featured a novel user-friendly interface based on augmented virtuality that improved surgical accuracy and operative time especially for trainee surgeons, therefore demonstrating its educational benefits. The resulting software suite could enhance operative accuracy and surgeon education for improved patient care.

Diagnosis and Innovative Multidisciplinary Management of Hallermann-Streiff Syndrome: 20-Year Follow-Up of a Patient.

Hallermann-Streiff syndrome (HSS) is a rare congenital disorder that mainly affects head and face development. We described the different patterns of the disease throughout the whole growth period and provided innovative treatment steps. Indeed, early genioplasty and dental implantation before growth completion were performed. These steps allowed to improve facial growth and to provide orthodontic anchorage, respectively. Complementary orthognathic surgery achieved satisfactory occlusion and refined aesthetics. We believe such an approach could be considered as a relevant treatment modality to complete multidisciplinary care in patients with HSS.

Temporomandibular Joint Regenerative Medicine.

The temporomandibular joint (TMJ) is an articulation formed between the temporal bone and the mandibular condyle which is commonly affected. These affections are often so painful during fundamental oral activities that patients have lower quality of life. Limitations of therapeutics for severe TMJ diseases have led to increased interest in regenerative strategies combining stem cells, implantable scaffolds and well-targeting bioactive molecules. To succeed in functional and structural regeneration of TMJ is very challenging. Innovative strategies and biomaterials are absolutely crucial because TMJ can be considered as one of the most difficult tissues to regenerate due to its limited healing capacity, its unique histological and structural properties and the necessity for long-term prevention of its ossified or fibrous adhesions. The ideal approach for TMJ regeneration is a unique scaffold functionalized with an osteochondral molecular gradient containing a single stem cell population able to undergo osteogenic and chondrogenic differentiation such as BMSCs, ADSCs or DPSCs. The key for this complex regeneration is the functionalization with active molecules such as IGF-1, TGF-ß1 or bFGF. This regeneration can be optimized by nano/micro-assisted functionalization and by spatiotemporal drug delivery systems orchestrating the 3D formation of TMJ tissues.

Follicular Lymphomas of Oral Region Treated by Rituximab Monotherapy: About Two Cases.

Lymphomas represent the second most common malignant lesions of the head and neck. Among them, follicular lymphomas (FLs) are the second most frequent B-cell non-Hodgkin's lymphomas. However, their incidence is rare in the oral cavity. We describe here two cases of FL with initial intra-oral presentation. The first patient was 81 years old and presented a palatal hyperplasia, covering the posterior edge of her dental removable prosthesis. After surgical excision of the lesion, the pathological diagnosis was an extra-nodal low-grade follicular lymphoma. Medical imaging assessment found a widespread but non-bulky involvement. The second patient was 38 years old and referred for asymptomatic swelling of the lower vestibule evolving for 4 months. Surgical exploration revealed a cheek lymphadenopathy infiltrated by a grade 3 FL; this patient did not have any other localization. Both patients were treated by a rituximab monotherapy with excellent response after 2 years of follow-up. Most of the time, FL affecting the oral cavity presenting as unspecific swelling, can mimic other frequent and benign oral lesions. In the absence of biopsy, both diagnosis and proper onco-hematological management may be delayed. The introduction of monoclonal antibody rituximab represents a major advance in the management of FL: it can be used as monotherapy or may be combined with chemo-immunotherapy according to histological grading, initial staging (extent, tumor mass or bulk), age and co-morbidities. These two observations show the importance of an early diagnosis regarding a chronic lesion in the oral cavity. Painless lymphadenopathy, asymptomatic swelling, aspecific mucosal lesions, or subprosthetic lesions should draw attention of any oral specialist.

A novel navigation system for maxillary positioning in orthognathic surgery: Preclinical evaluation.

Appropriate positioning of the maxilla is critical in orthognathic surgery. As opposed to splint-based positioning, navigation systems are versatile and appropriate in assessing the vertical dimension. Bulk and disruption to the line of sight are drawbacks of optical navigation systems. Our aim was to develop and assess a novel navigation system based on electromagnetic tracking of the maxilla, including real-time registration of head movements. Since the software interface has proved to greatly influence the accuracy of the procedure, we purposely designed and evaluated an original, user-friendly interface. A sample of 12 surgeons had to navigate the phantom osteotomized maxilla to eight given target positions using the software we have developed. Time and accuracy (translational error and angular error) were compared between a conventional and a navigated session. A questionnaire provided qualitative evaluation. Our system definitely allows a reduction in variability of time and accuracy among different operators. Accuracy was improved in all surgeons (mean terror difference = 1.11 mm, mean aerror difference = 1.32°). Operative time was decreased in trainees. Therefore, they would benefit from such a system that could also serve for educational purposes. The majority of surgeons who strongly agreed that such a navigation system would prove very helpful in complex deformities, also stated that it would be helpful in everyday orthognathic procedures.

Active implant combining human stem cell microtissues and growth factors for bone-regenerative nanomedicine.

AIMS: Mesenchymal stem cells (MSCs) from adult bone marrow provide an exciting and promising stem cell population for the repair of bone in skeletal diseases. Here, we describe a new generation of collagen nanofiber implant functionalized with growth factor BMP-7 nanoreservoirs and equipped with human MSC microtissues (MTs) for regenerative nanomedicine. MATERIALS & METHODS: By using a 3D nanofibrous collagen membrane and by adding MTs rather than single cells, we optimize the microenvironment for cell colonization, differentiation and growth. RESULTS & CONCLUSION: Furthermore, in this study, we have shown that by combining BMP-7 with these MSC MTs in this double 3D environment, we further accelerate bone growth in vivo. The strategy described here should enhance the efficiency of therapeutic implants compared with current simplistic approaches used in the clinic today based on collagen implants soaked in bone morphogenic proteins.

Nanostructured thick 3D nanofibrous scaffold can induce bone.

Designing unique nanostructured biomimetic materials is a new challenge in modern regenerative medicine. In order to develop functional substitutes for damaged organs or tissues, several methods have been used to create implants able to regenerate robust and durable bone. Electrospinning produces nonwoven scaffolds based on polymer nanofibers mimicking the fibrillar organization of bone extracellular matrix. Here, we describe a biomimetic 3D thick nanofibrous scaffold obtained by electrospinning of the biodegradable, bioresorbable and FDA-approved polymer, poly(ε-caprolactone). Such scaffold presents a thickness reaching one centimeter. We report here the demonstration that the designed nanostructured implant is able to induce in vivo bone regeneration.

Epidemiology and treatment outcome of surgically treated mandibular condyle fractures. A five years retrospective study.

Surgical management of mandibular condyle fractures is still controversial. Although it provides better outcome than closed treatment questions still remain about the surgical approach and the osteosynthesis devices to be used. Between 2005 and 2010, we managed 168 mandibular condyle fractures with open treatment. Two surgical approaches were used in this study, a pre-auricular and a high submandibular approach (one or the other or as a combined approach). Internal fixation was performed using TCP(®) plates (Medartis, Basel, Switzerland) or with two lag screws (15 and 17 mm). Delta plates were used in 15 cases (8.9%). We report the epidemiology of these fractures and the outcomes of the surgical treatment. We assessed the complications related to the surgical procedure and those related to the osteosynthesis material. The facial nerve related complication rate was very low and the osteosynthesis materials used proved to be strong enough to realize a stable fixation. The two approaches used in this study appeared to be safe with good aesthetic results. Most of the surgical procedure failures occurred in high subcondylar fractures especially when bilateral.