High-compatibility properties of Aronia melanocarpa extracts cross-linked chitosan/polyvinyl alcohol composite film for intelligent food packaging.

Although the active and intelligent properties of rich in anthocyanin extracts added to films have been extensively studied, there remains a sparsity of research pertaining to the miscibility of blended films. This work focused on the miscibility of the chitosan/polyvinyl alcohol (CP) film caused by the addition of Aronia melanocarpa extracts (AME), which are rich anthocyanins and phenolic acids, and its effect on physicochemical and functional properties. AME facilitated the amidation reaction and ionic interaction of chitosan in CP films, leading to loss of the crystallinity degree of chitosan. Furthermore, the crystal disruption promoted the formation of hydrogen bonds with polyvinyl alcohol (PVA) with the promoted miscibility. CP film incorporated with 8 % AME possessed the highest tensile strength (26.79 MPa), and elongation at break (66.38 %) as well as excellent ultraviolet-visible (UV-vis) light barrier property, water vapor barrier properties, due to its high miscibility degree. Moreover, this film also showed excellent antioxidant, antibacterial activity, and pH response function, which could be used to monitor the storage of highly perishable shrimp. Hence, the AME provided extra functionality and improved miscibility between chitosan and PVA, which showed great potential for the preparation of high-performance bioactive-fortified and intelligent food packaging films.

High-Efficiency Effect-Directed Analysis Leveraging Five High Level Advancements: A Critical Review.

Organic contaminants are ubiquitous in the environment, with mounting evidence unequivocally connecting them to aquatic toxicity, illness, and increased mortality, underscoring their substantial impacts on ecological security and environmental health. The intricate composition of sample mixtures and uncertain physicochemical features of potential toxic substances pose challenges to identify key toxicants in environmental samples. Effect-directed analysis (EDA), establishing a connection between key toxicants found in environmental samples and associated hazards, enables the identification of toxicants that can streamline research efforts and inform management action. Nevertheless, the advancement of EDA is constrained by the following factors: inadequate extraction and fractionation of environmental samples, limited bioassay endpoints and unknown linkage to higher order impacts, limited coverage of chemical analysis (i.e., high-resolution mass spectrometry, HRMS), and lacking effective linkage between bioassays and chemical analysis. This review proposes five key advancements to enhance the efficiency of EDA in addressing these challenges: (1) multiple adsorbents for comprehensive coverage of chemical extraction, (2) high-resolution microfractionation and multidimensional fractionation for refined fractionation, (3) robust in vivo/vitro bioassays and omics, (4) high-performance configurations for HRMS analysis, and (5) chemical-, data-, and knowledge-driven approaches for streamlined toxicant identification and validation. We envision that future EDA will integrate big data and artificial intelligence based on the development of quantitative omics, cutting-edge multidimensional microfractionation, and ultraperformance MS to identify environmental hazard factors, serving for broader environmental governance.

Application of Ion Mobility Spectrometry and the Derived Collision Cross Section in the Analysis of Environmental Organic Micropollutants.

Ion mobility spectrometry (IMS) is a rapid gas-phase separation technique, which can distinguish ions on the basis of their size, shape, and charge. The IMS-derived collision cross section (CCS) can serve as additional identification evidence for the screening of environmental organic micropollutants (OMPs). In this work, we summarize the published experimental CCS values of environmental OMPs, introduce the current CCS prediction tools, summarize the use of IMS and CCS in the analysis of environmental OMPs, and finally discussed the benefits of IMS and CCS in environmental analysis. An up-to-date CCS compendium for environmental contaminants was produced by combining CCS databases and data sets of particular types of environmental OMPs, including pesticides, drugs, mycotoxins, steroids, plastic additives, per- and polyfluoroalkyl substances (PFAS), polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs), and polybrominated diphenyl ethers (PBDEs), as well as their well-known transformation products. A total of 9407 experimental CCS values from 4170 OMPs were retrieved from 23 publications, which contain both drift tube CCS in nitrogen (DTCCSN2) and traveling wave CCS in nitrogen (TWCCSN2). A selection of publicly accessible and in-house CCS prediction tools were also investigated; the chemical space covered by the training set and the quality of CCS measurements seem to be vital factors affecting the CCS prediction accuracy. Then, the applications of IMS and the derived CCS in the screening of various OMPs were summarized, and the benefits of IMS and CCS, including increased peak capacity, the elimination of interfering ions, the separation of isomers, and the reduction of false positives and false negatives, were discussed in detail. With the improvement of the resolving power of IMS and enhancements of experimental CCS databases, the practicability of IMS in the analysis of environmental OMPs will continue to improve.

Environmental Stability and Transmissibility of Enveloped Viruses at Varied Animate and Inanimate Interfaces.

Enveloped viruses have been the leading causative agents of viral epidemics in the past decade, including the ongoing coronavirus disease 2019 outbreak. In epidemics caused by enveloped viruses, direct contact is a common route of infection, while indirect transmissions through the environment also contribute to the spread of the disease, although their significance remains controversial. Bridging the knowledge gap regarding the influence of interfacial interactions on the persistence of enveloped viruses in the environment reveals the transmission mechanisms when the virus undergoes mutations and prevents excessive disinfection during viral epidemics. Herein, from the perspective of the driving force, partition efficiency, and viral survivability at interfaces, we summarize the viral and environmental characteristics that affect the environmental transmission of viruses. We expect to provide insights for virus detection, environmental surveillance, and disinfection to limit the spread of severe acute respiratory syndrome coronavirus 2.

Virus-like particle-based nanocarriers as an emerging platform for drug delivery.

New nanocarrier technologies are emerging, and they have great potential for improving drug delivery, targeting efficiency and bioavailability. Virus-like particles (VLPs) are natural nanoparticles from animal and plant viruses and bacteriophages. Hence, VLPs present several great advantages, such as morphological uniformity, biocompatibility, reduced toxicity and easy functionalisation. VLPs can deliver many active ingredients to the target tissue and have great potential as a nanocarrier to overcome the limitations associated with other nanoparticles. This review will focus primarily on the construction and applications of VLPs, particularly as a novel nanocarrier to deliver active ingredients. Herein, the main methods for the construction, purification and characterisation of VLPs, as well as various VLP-based materials used in delivery systems are summarised. The biological distribution of VLPs in drug delivery, phagocyte-mediated clearance and toxicity are also discussed.

Disposable Polypropylene Face Masks: A Potential Source of Micro/Nanoparticles and Organic Contaminates in Humans.

We have been effectively protected by disposable propylene face masks during the COVID-19 pandemic; however, they may pose health risks due to the release of fine particles and chemicals. We measured micro/nanoparticles and organic chemicals in disposable medical masks, surgical masks, and (K)N95 respirators. In the breathing-simulation experiment, no notable differences were found in the total number of particles among mask types or between breathing intensities. However, when considering subranges, <2.5 µm particles accounted for ∼90% of the total number of micro/nanoparticles. GC-HRMS-based suspect screening tentatively revealed 79 (semi)volatile organic compounds in masks, with 18 being detected in ≥80% of samples and 44 in ≤20% of samples. Three synthetic phenolic antioxidants were quantified, and AO168 reached a median concentration of 2968 ng/g. By screening particles collected from bulk mask fabrics, we detected 18 chemicals, including four commonly detected in masks, suggesting chemical partition between the particles and the fabric fibers and chemical exposure via particle inhalation. These particles and chemicals are believed to originate from raw materials, intentionally and nonintentionally added substances in mask production, and their transformation products. This study highlights the need to study the long-term health risks associated with mask wearing and raises concerns over mask quality control.

Disturbed Gut-Liver axis indicating oral exposure to polystyrene microplastic potentially increases the risk of insulin resistance.

Human uptake abundance of microplastics via various pathways, and they accumulate in human liver, kidney, gut and even placenta (especially with a diameter of 1 µm or less). Recent scientific studies have found that exposure to microplastics causes intestinal inflammation and liver metabolic disorder, but it remains largely unknown that whether the damage and inflammation may cause further development of severe diseases. In this study, we discovered one of such potential diseases that may be induced by the exposure to small-sized microplastics (with a diameter of 1 µm) performing a multi-organ and multi-omics study comprising metabolomics and microbiome approaches. Unlike other animal experiments, the dosing strategy was applied in mice according to the daily exposure of the highly exposed population, which was more environmentally relevant and reflective of real-world human exposure. Our studies on the gut-liver axis metabolism have shown that the crosstalk between the gut and liver ultimately leaded to insulin resistance and even diabetes. We proactively verified this hypothesis by measuring the levels of fasting blood glucose and fasting insulin, which were found significantly elevated in the mice with microplastics exposure. These results indicate the urgent need of large-scale cohort evaluation on epidemiology and prognosis of insulin resistance after microplastics exposure in future.

Delivery of RGD-modified liposome as a targeted colorectal carcinoma therapy and its autophagy mechanism.

Liposomes are among the most extensively applied drug carriers due to their excellent biocompatibility, controllable size and ease of modification. In the present study, we prepared untargeted liposomes (LP) and targeting liposomes modified with Arg-Gly-Asp (RGD-LP), and Doxorubicin Hydrochloride (DOX) or fluorescent probe was loaded. RGD-LP/DOX was identified to be uniformly spherical in size 131.2 ± 2.7 nm. Based on flow cytometry analysis and the confocal laser scanning microscopy, RGD-LP had a higher uptake into HRT-18 colorectal cancer cells than LP. Further, in vivo imaging study further suggested that RGD-LP could significantly increase the liposome accumulation in the tumour tissues of the mice bearing subcutaneous tumours. By investigating the targeting mechanism of RGD-LP, we found that they entered the cell via macropinocytosis. When loaded with DOX, RGD-LP exerted stronger tumour growth inhibitory activity against tumours of colorectal carcinoma compared to LP. Moreover, RGD-LP induced autophagy. Therefore, RGD-LP have the potential to be applied as a targeted colorectal carcinoma therapy.

Alternaria yunnanensis sp. nov., a New Alternaria Species Causing Foliage Spot of Rubber Tree in China.

A new species of Alternaria causing leaf spots on the rubber tree (Hevea brasiliensis) in Yunnan, China, was isolated, examined, and illustrated. Morphologically, it belongs to the section Porri of Alternaria, which produces relatively large conidia and a simple or branched, filamentous long beak. It is, however, characterized by conidiophores gradually enlarging near the apex into a clavate conidiogenous cell and long ellipsoid to obclavate, smooth-walled conidia with a long filamentous beak. Molecular phylogenetic analyses based on ITS rDNA, GAPDH, and TEF1-alpha sequences demonstrate that the phytopathogen falls in the clade of the section Porri, being most closely related to A. sidae, A. sennae, A. deseriticola, A. cyamopsidis, A. rostellata, A. nitrimali, A. crassa, and A. thunbergiae.

Ultrathin Lanthanum Tantalate Perovskite Nanosheets Modified by Nitrogen Doping for Efficient Photocatalytic Water Splitting.

Ultrathin nitrogen-doped perovskite nanosheets LaTa2O6.77N0.15- have been fabricated by exfoliating Dion-Jacobson-type layered perovskite RbLaTa2O6.77N0.15. These nanosheets demonstrate superior photocatalytic activities for water splitting into hydrogen and oxygen and remain active with photon wavelengths as far as 600 nm. Their apparent quantum efficiency under visible-light illumination (λ ≥ 420 nm) approaches 1.29% and 3.27% for photocatalytic hydrogen and oxygen production, being almost 4-fold and 8-fold higher than bulk RbLaTa2O6.77N0.15. Their outstanding performance likely stems from their tiny thickness (single perovskite slab) that essentially removes bulk charge diffusion steps and extends the lifetime of photogenerated charges. Theoretical calculations reveal a peculiar 2D charge transportation phenomenon in RbLaTa2O6.77N0.15; thus, exfoliating RbLaTa2O6.77N0.15 into LaTa2O6.77N0.15- nanosheets has limited impact on charge transportation properties but significantly enhances the surface areas which contributes to more reaction sites.

Homologous Compounds ZnnIn2O3+n (n = 4, 5, and 7) Containing Laminated Functional Groups as Efficient Photocatalysts for Hydrogen Production.

Strong visible light absorption and high charge mobility are desirable properties for an efficient photocatalyst, yet they are hard to be realized simultaneously in a single semiconductor compound. In this work, we demonstrate that these properties coexist in homologous compounds ZnnIn2O3+n (n = 4, 5, and 7) with a peculiar layered structure that combines optical active segment and electrical conductive segment together. Their enhanced visible light absorption originates from tetrahedrally or trigonal-bipyramidally coordinated In atoms in Zn(In)O4(5) layers which enable p-d hybridization between In 4d and O 2p orbitals so that valence band minimum (VBM) is uplifted with a reduced band gap. Theoretical calculations reveal their anisotropic features in charge transport and functionality of different constituent segments, i.e., Zn(In)O4(5) layers and InO6 layers as being for charge generation and charge collection, respectively. Efficient photocatalytic hydrogen evolution was observed in these compounds under full range (λ ≥ 250 nm) and visible light irradiation (λ ≥ 420 nm). High apparent quantum efficiency ∼2.79% was achieved for Zn4In2O7 under full range irradiation, which is almost 5-fold higher than their parent oxides ZnO and In2O3. Such superior photocatalytic activities of these homologous compounds can be understood as layer-by-layer packing of charge generation/collection functional groups that ensures efficient photocatalytic reactions.

Structural dependence of the photocatalytic properties of double perovskite compounds A2InTaO6 (A = Sr or Ba) doped with nickel.

The crystal structure of photocatalysts generally plays a pivotal role in controlling their electronic structure as well as catalytic performance. In this work, a series of double perovskite compounds A2InTaO6 (A = Sr or Ba) and their Ni doped counterparts were investigated with the aim of understanding how doping and structural modification will affect their photocatalytic activity. Our results show that Ni doping is effective in improving the optical absorption of these wide band gap semiconductors and accommodating the Sr cation in the A sites leads to severe structural distortion, i.e. the In(Ni)-O-Ta bond angle deviates largely from 180°. A better photocatalytic performance was observed for samples with Ni doping and Ba in the A sites. The best photocatalytic hydrogen production rate recorded was ∼293.6 µmol h(-1) for Ba2In0.9Ni0.1TaO6 under full range irradiation, corresponding to an apparent quantum efficiency of 2.75%. DFT calculations reveal the role of Ni doping by forming additional spin-polarized bands inside the intrinsic band gap of the native perovskite. The better photocatalytic activity of Ba2In0.9Ni0.1TaO6 can then be understood as a result of a reduced band gap as well as a linear In(Ni)-O-Ta bond arrangement that is favorable for the strong metal-oxygen-metal interactions.

Quinary wurtzite Zn-Ga-Ge-N-O solid solutions and their photocatalytic properties under visible light irradiation.

Wurtzite solid solutions between GaN and ZnO highlight an intriguing paradigm for water splitting into hydrogen and oxygen using solar energy. However, large composition discrepancy often occurs inside the compound owing to the volatile nature of Zn, thereby prescribing rigorous terms on synthetic conditions. Here we demonstrate the merits of constituting quinary Zn-Ga-Ge-N-O solid solutions by introducing Ge into the wurtzite framework. The presence of Ge not only mitigates the vaporization of Zn but also strongly promotes particle crystallization. Synthetic details for these quinary compounds were systematically explored and their photocatalytic properties were thoroughly investigated. Proper starting molar ratios of Zn/Ga/Ge are of primary importance for single phase formation, high particle crystallinity and good photocatalytic performance. Efficient photocatalytic hydrogen and oxygen production from water were achieved for these quinary solid solutions which is strongly correlated with Ge content in the structure. Apparent quantum efficiency for optimized sample approaches 1.01% for hydrogen production and 1.14% for oxygen production. Theoretical calculation reveals the critical role of Zn for the band gap reduction in these solid solutions and their superior photocatalytic acitivity can be understood by the preservation of Zn in the structure as well as a good crystallinity after introducing Ge.

Bismuth and chromium co-doped strontium titanates and their photocatalytic properties under visible light irradiation.

Modification of prototype perovskite compound SrTiO3 by introducing foreign elements has been an appealing means to endow this wide band gap semiconductor with visible light responses. Here we systematically investigated a series of Sr1-xBixTi1-xCrxO3 solid solution compounds prepared by two different synthetic routes, namely, solid state reactions and the hydrothermal method. Their crystal structures as well as other physicochemical properties were explored. Our results showed that a number of important factors such as microstructures, crystallinity, light absorbance and surface compositions etc. are all strongly correlated with the synthetic methods used. The hydrothermal method is generally helpful for morphology controls as well as avoiding Cr(6+) defects and Sr segregation at the surface, thereby contributing to a high photocatalytic activity. Better performance normally occurs in samples with a high crystallinity and free of defects like Bi(5+). Theoretical calculations suggest that Cr plays an important role in band gap reduction and photocatalytic reactions, while Bi only acts as a constituent cation for the perovskite structure and does not significantly alter the electronic structures near the Fermi level. Our findings have revealed how synthetic routes are relevant to the final photocatalytic properties of a compound, and therefore comparisons among various photocatalysts have to include concerns about their preparation history.

Photocatalytic Hydrogen Production over Chromium Doped Layered Perovskite Sr2TiO4.

Layered semiconductor photocatalysts have been found to exhibit promising performance levels, probably linked to their interlayer framework that facilitates separation of charge carriers and the reduction/oxidation reactions. Layered titanates, however, generally demonstrate activities under UV irradiation, and therein lies the strong desire to extend their activity into the visible light region. Here, we investigated a series of layered perovskite by doping Sr2TiO4 with Cr and/or La in the hope to improve their visible light responses. Their crystal structures and other physicochemical properties were systematically explored. Our results show that La and Cr can be successfully accommodated in the layered structure and Cr is an efficient dopant for the extension of visible light absorbance. Much enhanced photocatalytic hydrogen evolution was observed after doping and was found to be composition-dependent. The highest hydrogen production rate approaches 97.7 µmol/h for Sr2Ti0.95Cr0.05O4-δ under full range irradiation (λ ≥ 250 nm) and 17 µmol/h for Sr2Ti0.9Cr0.1O4-δ under visible light irradiation (λ ≥ 400 nm), corresponding to an apparent quantum efficiency of 0.16% and 0.05%, respectively. Theoretical calculation reveals that the improved optical and photocatalytic properties are owing to a newly formed spin-polarized valence band from Cr 3d orbitals. The decreased unit cell parameters, reduced band gaps as well as anisotropic properties of layered architectures are likely the reasons for a better activity. Nevertheless, instability of these compounds in the presence of moisture and CO2 was also noticed, suggesting that protective atmospheres are needed for the storage of these photocatalysts.

Efficient charge separation based on type-II g-C3N4/TiO2-B nanowire/tube heterostructure photocatalysts.

Separation of photo-generated charges has played a crucial role in controlling the actual performance of a photocatalytic system. Here we have successfully fabricated g-C3N4/TiO2-B nanowire/tube heterostructures through facile urea degradation reactions. Owing to the effective separation of photo-generated charges associated with the type-II band alignment and intimate interfacial contacts between g-C3N4 and TiO2-B nanowires/tubes, such heterostructures demonstrate an improved photocatalytic activity over individual moieties. Synthetic conditions such as hydrothermal temperatures for the preparation of TiO2-B and the weight ratio of TiO2-B to urea were systematically investigated. A high crystallinity of TiO2-B as well as the proper growth of g-C3N4 on its surface are critical factors for a better performance. Our simple synthetic method and the prolonged lifetime of photo-generated charges signify the importance of type-II heterostructures in the photocatalytic applications.