Multivalent Duplexed-Aptamer Networks Regulated a CRISPR-Cas12a System for Circulating Tumor Cell Detection.

Although circulating tumor cells (CTCs) have great potential to act as the mini-invasive liquid biopsy cancer biomarker, a rapid and sensitive CTC detection method remains lacking. CRISPR-Cas12a has recently emerged as a promising tool in biosensing applications with the characteristic of fast detection, easy operation, and high sensitivity. Herein, we reported a CRISPR-Cas12a-based CTC detection sensor that is regulated by the multivalent duplexed-aptamer networks (MDANs). MDANs were synthesized on a magnetic bead surface by rolling circle amplification (RCA), which contain multiple duplexed-aptamer units that allow structure switching induced by cell-binding events. The presence of target cells can trigger the release of free "activator DNA" from the MDANs structure to activate the downstream CRISPR-Cas12a for signal amplification. Furthermore, the 3D DNA network formed by RCA products also provided significantly higher sensitivity than the monovalent aptamer. As a proof-of-concept study, we chose the most widely used sgc8 aptamer that specifically recognizes CCRF-CEM cells to validate the proposed approach. The MDANs-Cas12a system could afford a simple and fast CTC detection workflow with a detection limit of 26 cells mL-1. We also demonstrated that the MDANs-Cas12a could directly detect the CTCs in human blood samples, indicating a great potential of the MDANs-Cas12a in clinical CTC-based liquid biopsy.

DNAzyme-Au nanoprobe coupled with graphene-oxide-loaded hybridization chain reaction signal amplification for fluorometric determination of alkaline phosphatase.

A sensing platform is presented for the determination of alkaline phosphatase (ALP) activity based on the cooperation of DNAzyme-Au spherical nucleic acid nanoprobe with the graphene-oxide-loaded hybridization chain reaction (HCR/GO) system to achieve good detection sensitivity and specificity. This assay takes advantage of the strong affinity of pyrophosphate (PPi) to Cu2+ ions and the fact that ALP can hydrolyze pyrophosphate (PPi) to release free Cu2+ ions. In the presence of ALP, the released Cu2+ can promote the Cu2+-dependent DNAzyme to cleave the substrate that generates a shorter DNA fragment, which is responsible for further triggering the HCR/GO system to form a long fluorescence dsDNA and thereby giving an amplified fluorescence signal. Linear calibration range was obtained from 0.2 to 10 U L-1, and the limit of detection (LOD) is about 0.14 U L-1. The feasibility of the proposed method was validated by spiking ALP standards in bovine serum. The recovery ranged from 97.2 to 104.6%, and a coefficient of variation (CV) of less than 8% (n = 3) was obtained. This assay strategy was also applied to evaluate the ALP inhibitor efficiency, which indicates that the assay has potential for drug screening.

Facile and sensitive determination of N-nitrosamines in food samples by high-performance liquid chromatography via combining fluorescent labeling with dispersive liquid-liquid microextraction.

The intake of N-nitrosamines (NAs) from foodstuffs is considered to be an important influence factor for several cancers. But the rapid and sensitive screening of NAs remains a challenge in the field of food safety. Inspired by that, a sensitive and rapid method was demonstrated for determination of five NAs (Nitrosopyrrolidine, Nitrosodimethylamine, Nitrosodiethylamine, Nitrosodipropylamine and Nitrosodibutylamine) using dispersive liquid-liquid microextraction (DLLME) followed by high-performance liquid chromatography with fluorescence detection (HPLC-FLD). The NAs were firstly denitrosated and labeled by 2-(11H-benzo[a]carbazol-11-yl) ethyl carbonochloridate (BCEC-Cl) and finally enriched by DLLME. Furthermore, the main DLLME conditions were optimized systematically. Under the optimal conditions, satisfactory limits of detection (LODs) were obtained with a range of 0.01-0.07ngg-1, which were significantly lower than the reported methods. The developed method showed many merits including rapidity, simplicity, high sensitivity and excellent selectivity, which shows a broad prospect in food safety analysis.

Sensitive determination of thiols in wine samples by a stable isotope-coded derivatization reagent d0/d4-acridone-10-ethyl-N-maleimide coupled with high-performance liquid chromatography-electrospray ionization-tandem mass spectrometry analysis.

As the key aroma compounds, varietal thiols are the crucial odorants responsible for the flavor of wines. Quantitative analysis of thiols can provide crucial information for the aroma profiles of different wine styles. In this study, a rapid and sensitive method for the simultaneous determination of six thiols in wine using d0/d4-acridone-10-ethyl-N-maleimide (d0/d4-AENM) as stable isotope-coded derivatization reagent (SICD) by high performance liquid chromatography-electrospray ionization-tandem mass spectrometry (HPLC-ESI-MS/MS) has been developed. Quantification of thiols was performed by using d4-AENM labeled thiols as the internal standards (IS), followed by stable isotope dilution HPLC-ESI-MS/MS analysis. The AENM derivatization combined with multiple reactions monitoring (MRM) not only allowed trace analysis of thiols due to the extremely high sensitivity, but also efficiently corrected the matrix effects during HPLC-MS/MS and the fluctuation in MS/MS signal intensity due to instrument. The obtained internal standard calibration curves for six thiols were linear over the range of 25-10,000pmol/L (R2≥0.9961). Detection limits (LODs) for most of analytes were below 6.3pmol/L. The proposed method was successfully applied for the simultaneous determination of six kinds of thiols in wine samples with precisions ≤3.5% and recoveries ≥78.1%. In conclusion, the developed method is expected to be a promising tool for detection of trace thiols in wine and also in other complex matrix.

Sensitive and background-free determination of thiols from wastewater samples by MOF-5 extraction coupled with high-performance liquid chromatography with fluorescence detection using a novel fluorescence probe of carbazole-9-ethyl-2-maleimide.

A sensitive and background-free pre-column derivatization method for the determination of thiol compounds using metal-organic framework material (MOF-5) as dispersive solid-phase extraction (DSPE) adsorbent followed by high-performance liquid chromatography fluorescence detection (HPLC-FLD) has been developed. In this paper, a novel labeling reagent, carbazole-9-ethyl-2-maleimide(CAEM), was synthesized and reacted with thiols at 40°C for 10min in the presence of PBS buffer (0.02mol/L, pH 7.5). Interestingly, CAEM itself had no fluorescence, while its derivatives exhibited intense fluorescence with an excitation maximum at λex 274nm and an emission maximum at λem 363nm, which greatly reduced the background interference and improved the sensitivity of the method. Furthermore, the MOF-5 was prepared and used as DSPE adsorbent for the selective adsorption of thiols from wastewater sample. Under the optimized experimental conditions, an excellent linearity for all analytes over their concentration ranges of 0.01-1.0µmol/L (R2>0.9986)were obtained with the limit of detection (LOD) ranging from 8 to 17.1pmol/L for nine tested thiols. The feasibility of this method for the determination of thiols in wastewater samples had been evaluated and satisfactory average recoveries (n=3) were achieved with the range of 86.6-98.5%.

Facile and ultrasensitive fluorescence sensor platform for tumor invasive biomaker ß-glucuronidase detection and inhibitor evaluation with carbon quantum dots based on inner-filter effect.

Early detection and diagnosis have great practical significances for the effective prevention and treatment of cancer. In this study, we developed a novel, facile and ultra-sensitive fluorescence assay for the determination of tumor invasive biomarker ß-glucuronidase (GLU) based on the inner-filter effect (IFE). The nitrogen-doped carbon quantum dots (N-CQDs) with green photoluminescence were employed as the fluorophore in IFE, and 4-nitrophenyl-ß-D-glucuronide (PNPG) was used to act as GLU substrate, and GLU catalytic product (p-nitrophenol (PNP)) was capable of acting as the robust absorber in IFE to turn off the fluorescence of N-CQDs due to the complementary overlap between the absorption of PNP and the excitation of N-CQDs. Thus, signal of GLU activity could be recorded by the fluorescence intensity of N-CQDs. Unlike other fluorescence sensing mechanism such as fluorescence resonance energy transfer (FRET) or photoinduced electron transfer (PET), IFE has no requirement for electron or energy transfer process or any chemical modification of fluorophore, which makes our assay more flexible and simple. The proposed method exhibited a good linear relationship from 1UL(-1) to 60UL(-1) (R(2)=0.9967) with a low detection limit of 0.3UL(-1). This method was also successfully applied to the analysis of serum samples and the inhibitor screening from natural product. The developed sensor platform was proven to be reliable, facile, sensitive, and selective, making it promising as a candidate for GLU activity detection in clinic tumor diagnose and anti-tumor drug screening.

Determination of thiophenols with a novel fluorescence labelling reagent: analysis of industrial wastewater samples with SPE extraction coupled with HPLC.

A simple, sensitive, and selective high-performance liquid chromatography (HPLC) method using 9-(2-iodoethyl)acridone (IEA) as a novel fluorescence derivatizing agent for the simultaneous determination of six thiophenols has been developed. An efficient Pb(2+)-modified OASIS-MCX cartridge was used and could get good recoveries. IEA was successfully used to label thiophenols with high sensitivity and excellent selectivity. The effects of different solvents, pH, and surfactants on fluorescence properties of derivatives were investigated. To obtain the best labeling efficiency, derivatizing parameters including pH value, temperature, and concentration of IEA, as well as types of catalysts were also evaluated in detail. Under the optimal conditions, the separation could be achieved within 12 min with limits of detection (LODs) in the range of 0.6-5.8 µg L(-1) and relative standard deviations (RSDs) < 3.9%. This is the first time that IEA was applied to the analysis of thiophenols, and the established method has been successfully applied to the trace level detection of thiophenols in industrial wastewater samples.