Artificial intelligence for disease diagnostics still has a long way to go.

Artificial intelligence (AI) can sometimes resolve difficulties that other advanced technologies and humans cannot. In medical diagnostics, AI has the advantage of processing figure recognition, especially for images with similar characteristics that are difficult to distinguish with the naked eye. However, the mechanisms of this advanced technique should be well-addressed to elucidate clinical issues. In this letter, regarding an original study presented by Takayama et al, we suggest that the authors should effectively illustrate the mechanism and detailed procedure that artificial intelligence techniques processing the acquired images, including the recognition of non-obvious difference between the normal parts and pathological ones, which were impossible to be distinguished by naked eyes, such as the basic constitutional elements of pixels and grayscale, special molecules or even some metal ions which involved into the diseases occurrence.

Toughening Hydrogels with Fibrillar Connected Double Networks.

Biological tissues, such as tendons or cartilage, possess high strength and toughness with very low plastic deformations. In contrast, current strategies to prepare tough hydrogels commonly utilize energy dissipation mechanisms based on physical bonds that lead to irreversible large plastic deformations, thus limiting their load-bearing applications. This article reports a strategy to toughen hydrogels using fibrillar connected double networks (fc-DN), which consist of two distinct but chemically interconnected polymer networks, that is, a polyacrylamide network and an acrylated agarose fibril network. The fc-DN design allows efficient stress transfer between the two networks and high fibril alignment during deformation, both contributing to high strength and toughness, while the chemical crosslinking ensures low plastic deformations after undergoing high strains. The mechanical properties of the fc-DN network can be readily tuned to reach an ultimate tensile strength of 8 MPa and a toughness of above 55 MJ m-3, which is 3 and 3.5 times more than that of fibrillar double network hydrogels without chemical connections, respectively. The application potential of the fc-DN hydrogel is demonstrated as load-bearing damping material for a jointed robotic lander. The fc-DN design provides a new toughening mechanism for hydrogels that can be used for soft robotics or bioelectronic applications.

Visualizing Noncovalent Interactions and Property Prediction of Submicron-Sized Charge-Transfer Crystals from ab-initio Determined Structures.

The charge-transfer (CT) interactions between organic compounds are reflected in the (opto)electronic properties. Determining and visualizing crystal structures of CT complexes are essential for the design of functional materials with desirable properties. Complexes of pyranine (PYR), methyl viologen (MV), and their derivatives are the most studied water-based CT complexes. Nevertheless, very few crystal structures of CT complexes have been reported so far. In this study, the structures of two PYRs-MVs CT crystals and a map of the noncovalent interactions using 3D electron diffraction (3DED) are reported. Physical properties, e.g., band structure, conductivity, and electronic spectra of the CT complexes and their crystals are investigated and compared with a range of methods, including solid and liquid state spectroscopies and highly accurate quantum chemical calculations based on density functional theory (DFT). The combination of 3DED, spectroscopy, and DFT calculation can provide important insight into the structure-property relationship of crystalline CT materials, especially for submicrometer-sized crystals.

Synthesis of salcaprozate sodium and its significance in enhancing pancreatic kininogenase absorption performance.

We conducted pharmacokinetic research wherein salcaprozate sodium (SNAC) was utilized as a penetration enhancer by incorporating it into pancreatic kininogenase (PK) to improve the bioavailability of pancreatic kininogenase enteric-coated tablets. We conducted in vitro studies on PK using the Caco-2 cell model and quantified PK levels using the enzyme-linked immunosorbent assay (ELISA) method. We conducted methodological verification by blending SNAC and PK powders into enteric-coated capsules, and studied the pharmacokinetic characteristics. Based on the PK transport assay, the cumulative permeation rates of the test group that employed a SNAC to PK ratio of 32:1, 16:1, 8:1, 4:1, and 2:1 were 13.574%, 7.597%, 10.653%, 3.755%, and 2.523%, respectively. We conducted a uniformity test on the powder that contained a blend of SNAC and PK. The relative standard deviations (RSDs) for both the power containing SNAC and the power not containing SNAC were less than 10%. Based on the methodological verification, in vivo pharmacokinetic study of PK met the experimental requirements. As indicated by the results of in vivo pharmacokinetic research on rats, the test group (This group used SNAC) had a PK AUC0-12 h of 5679.747 ng/L*h and t1/2 of 4.569 h, while the control group (This group did not use SNAC) had a PK AUC0-12 h of 4639.665 ng/L*h and t1/2 of 3.13 h. This study has established a low-cost, environmentally friendly, and safe SNAC synthesis route with high process yield suitable for industrial production. SNAC demonstrates an absorption-enhancing effect on PK, and the optimal ratio of SNAC to PK is determined to be 32:1.

Concentrated growth factor therapy as cosmetic treatment in discoid lupus erythematosus.

Discoid lupus erythematosus (DLE) is a disfigurement disease. The atrophic scar and hair loss of this disease are followed by cosmetic defects and profoundly impact psychological health. Concentrated growth factor (CGF) has been widely adopted in medical cosmetology. Here we report a 36-year-old female systemic lupus erythematosus patient with a 5-year history of alopecia in DLE, who was recommended for CGF therapy and experienced hair regrowth. We suggest that CGF may be an effective cosmetic treatment for DLE.

High-Resolution Mass Spectrometry Screening of Quaternary Ammonium Compounds (QACs) in Dust from Homes and Various Microenvironments in South China.

Despite their ubiquitous use, information regarding the presence of quaternary ammonium compounds (QACs) in various microenvironments remains scarce and only a small subset of QACs has been monitored using targeted chemical analysis. In this study, a total of 111 dust samples were collected from homes and various public settings in South China during the COVID-19 pandemic and were analyzed for traditional and emerging QACs using high-resolution mass spectrometry. The total traditional QAC concentrations in residential dust (∑traditional QAC, sum of 18 traditional QACs) ranged from 13.8 to 150 µg/g with a median concentration of 42.2 µg/g. Twenty-eight emerging QACs were identified in these samples, and the composition of ∑emerging QAC (sum of emerging QACs) to ∑QAC (sum of traditional and emerging QACs) ranged from 19 to 42% across various microenvironments, indicating the widespread existence of emerging QACs in indoor environments. Additionally, dust samples from cinemas exhibited higher ∑QAC concentrations compared to homes (medians 65.9 µg/g vs 58.3 µg/g, respectively), indicating heavier emission sources of QACs in these places. Interestingly, significantly higher ∑QAC concentrations were observed in dust from the rooms with carpets than those without (medians 65.6 µg/g vs 32.6 µg/g, p < 0.05, respectively). Overall, this study sheds light on the ubiquitous occurrence of QACs in indoor environments in South China.

Advances in far-infrared research: therapeutic mechanisms of disease and application in cancer detection.

Far infrared (FIR) irradiation is commonly used as a convenient, non-contact, non-invasive treatment for diseases such as myocardial ischemia, diabetes, and chronic kidney disease. In this review, we focus on reviewing the potential therapeutic mechanisms of FIR and its cutting-edge applications in cancer detection. Firstly, we searched the relevant literature in the last decade for systematic screening and briefly summarized the biophysical properties of FIR. We then focused on the possible mechanisms of FIR in wound healing, cardiovascular diseases, and other chronic diseases. In addition, we review recent applications of FIR in cancer detection, where Fourier transform infrared spectroscopy and infrared thermography provide additional diagnostic methods for the medical diagnosis of cancer. Finally, we conclude and look into the future development of FIR for disease treatment and cancer detection. As a high-frequency non-ionizing wave, FIR has the advantages of safety, convenience, and low cost. We hope that this review can provide biological information reference and relevant data support for those who are interested in FIR and related high-frequency non-ionizing waves, to promote the further application of FIR in the biomedical field.

High-permittivity Solvents Increase MXene Stability and Stacking Order Enabling Ultraefficient Terahertz Shielding.

2D transition metal carbides and nitrides (MXenes) suggest an uncommonly broad combination of important functionalities amongst 2D materials. Nevertheless, MXene suffers from facile oxidation and colloidal instability upon conventional water-based processing, thus limiting applicability. By experiments and theory, It is suggested that for stability and dispersibility, it is critical to select uncommonly high permittivity solvents such as N-methylformamide (NMF) and formamide (FA) (εr  = 171, 109), unlike the classical solvents characterized by high dipole moment and polarity index. They also allow high MXene stacking order within thin films on carbon nanotube (CNT) substrates, showing very high Terahertz (THz) shielding effectiveness (SE) of 40-60 dB at 0.3-1.6 THz in spite of the film thinness < 2 µm. The stacking order and mesoscopic porosity turn relevant for THz-shielding as characterized by small-angle X-ray scattering (SAXS). The mechanistic understanding of stability and structural order allows guidance for generic MXene applications, in particular in telecommunication, and more generally processing of 2D materials.

Novel Circular RNA CircUBAP2 Drives Tumor Progression by Regulating the miR-143/TFAP2B Axis in Prostate Cancer.

BACKGROUND: More and more investigations reveal that circular RNAs (circRNAs) are involved in cancer progression. CircRNA UBAP2 was closely related to prostate cancer. However, the biological function and specifical mechanism of circUBAP2 are still poorly discovered in prostate cancer (PCa). OBJECTIVES: This study aims to explore the biological function and mechanism of circUBAP2 in PCa. METHODS: The levels of mRNA and proteins were assessed by qRT-PCR assay and Western blot, respectively. Cell growth, migration, and invasion ability were measured using CCK-8 assay and Transwell assay. Apoptosis was assessed using flow cytometry. The interactions between circUBAP2, miR-143, and TFAP2B were determined by luciferase report assay. The tumor growth was determined by in vivo tumor formation assay. The tumor morphology was assessed using H&E staining assay, and immunohistochemistry assay was conducted to assess the level of KI67. RESULTS: We found circUBAP2 and TFAP2B were notably elevated, while miR-143 was largely attenuated in prostate cancer cells and tissues. CircUBAP2 was found to affect cell viability, metastasis and EMT, while attenuating the apoptosis rate of prostate cancer cells. CircUBAP2 directly targeted miR-143, and miR-143 inhibitor could reverse the effects that circUBAP2 interference-induced in prostate cancer cells. TFAP2B is directly bound to miR-143, and overexpression of TFAP2B could attenuate the influences that miR-143-induced in prostate cancer cells. CONCLUSION: CircUBAP2 promoted prostate cancer progression via miR-143/TFAP2B axis.

Heating-Induced Switching to Hierarchical Liquid Crystallinity Combining Colloidal and Molecular Order in Zwitterionic Molecules.

Hierarchical self-assemblies of soft matter involving triggerable or switchable structures at different length scales have been pursued toward multifunctional behaviors and complexity inspired by biological matter. They require several and balanced competing attractive and repulsive interactions, which provide a grand challenge in particular in the "bulk" state, i.e., in the absence of plasticizing solvents. Here, we disclose that zwitterionic bis-n-tetradecylphosphobetaine, as a model compound, shows a complex thermally switchable hierarchical self-assembly in the solvent-free state. It shows polymorphism and heating-induced reversible switching from low-temperature molecular-level assemblies to high-temperature hierarchical self-assemblies, unexpectedly combining colloidal and molecular self-assemblies, as inferred by synchrotron small-angle X-ray scattering (SAXS). The high-temperature phase sustains birefringent flow, indicating a new type of hierarchical thermotropic liquid crystallinity. The high-temperature colloidal-level SAXS reflections suggest indexation as a 2D oblique pattern and their well-defined layer separation in the perpendicular direction. We suggest that the colloidal self-assembled motifs are 2D nanoplatelets formed by the lateral packing of the molecules, where the molecular packing frustration between the tightly packed zwitterionic moieties and the coiled alkyl chains demanding more space limits the lateral platelet growth controlled by the alkyl stretching entropy. An indirect proof is provided by the addition of plasticizing ionic liquids, which relieve the ionic dense packings of zwitterions, thus allowing purely smectic liquid crystallinity without the colloidal level order. Thus, molecules with a simple chemical structure can lead to structural hierarchy and tunable complexity in the solvent-free state by balancing the competing long-range electrostatics and short-range nanosegregations.

A Six-Surface System to Describe Anatomy of Anterior Clinoid Process and Its Application in Anterior Clinoidectomy and Resection of Paraclinoid Meningioma.

OBJECTIVE: The anterior clinoid process (ACP) is surrounded by nerves and vessels that, together, constitute an intricate anatomical structure with variations that challenges the performance of individualized anterior clinoidectomy in treating lesions with different extents of invasion. In the present study, we established a 6-surface system for the ACP based on anatomical landmarks and analyzed its value in guiding ACP drilling and resection of paraclinoid meningiomas. METHODS: Using the anatomical characteristics of 10 dry skull specimens, we set 9 anatomical landmarks to delineate the ACP into 6 surfaces. Guided by our 6-surface system and eggshell technique, 5 colored silicone-injected anatomical specimens were dissected via a frontotemporal craniotomy to perform anterior clinoidectomy. Next, 3 typical cases of paraclinoid meningioma were selected to determine the value of using our 6-surface system in tumor resection. RESULTS: Nine points (A-H and T) were proposed to delineate the ACP surface into frontal, temporal, optic nerve, internal carotid artery, cranial nerve III, and optic strut surfaces according to the adjacent tissues. Either intradurally or extradurally, the frontal and temporal surfaces could be identified and drilled into depth, followed by skeletonization of the optic nerve, cranial nerve III, internal carotid artery, and optic strut surfaces. After the residual bone was removed, the ACP was drilled off. In surgery of paraclinoid meningiomas, our 6-surface system provided great benefit in locating the dura, nerves, and vessels, thus, increasing the safety of opening the optic canal and relaxing the oculomotor or optic nerves and allowing for individualized ACP drilling for meningioma removal. CONCLUSIONS: Our 6-surface system adds much anatomical information to the classic Dolenc triangle and can help neurosurgeons, especially junior ones, to increase their understanding of the paraclinoid spatial structure and accomplish individualized surgical procedures with high safety and minimal invasiveness.

LncRNA TUG1 promotes pulmonary fibrosis progression via up-regulating CDC27 and activating PI3K/Akt/mTOR pathway.

Idiopathic pulmonary fibrosis (IPF) is a fatal interstitial lung disease with an unclear pathogenesis. This study aimed to elucidate the function and potential mechanisms of TUG1 in IPF progression. Cell viability and migration were detected by CCK-8 and transwell assays. Autophagy, fibrosis, or EMT-related proteins were measured by Western blotting. Pro-inflammatory cytokine levels were assessed by ELISA kits. The subcellular localization of TUG1 was observed by FISH assay. RIP assay detected the interaction between TUG1 and CDC27. TUG1 and CDC27 was up-regulated in TGF-ß1-induced RLE-6TN cells. TUG1 depletion suppressed pulmonary fibrosis via attenuating inflammation, EMT, inducing autophagy and inactivating PI3K/Akt/mTOR pathway in vitro and in vivo. TUG1 knockdown prevented CDC27 expression. TUG1 silencing ameliorated pulmonary fibrosis by reducing CDC27 expression and inhibiting PI3K/Akt/mTOR pathway.

An ultra-sensitive NH3 gas sensor enabled by an ion-in-conjugated polycroconaine/Ti3C2Tx core-shell composite.

MXenes are emerging sensing materials due to their metallic conductivity and rich surface chemistry for analytes; they, however, suffer from poor stability. Incorporation with functional polymers can largely prevent the performance decay and enhance the sensing performance. Herein, we demonstrate a core-shell composite, Ti3C2Tx@croconaine (poly(1,5-diaminonaphthalene-croconaine), PDAC) prepared by a facile in situ polymerization reaction, suitable for NH3 detection. Compared to pristine Ti3C2Tx, the sensor made of a Ti3C2Tx-polycroconaine composite exhibits a significantly enhanced sensitivity of 2.8% ppm-1 and an estimated achievable limit of detection of 50 ppb. The improved sensing performance could be attributed to the presence of PDAC facilitating the adsorption of NH3 and changing the tunneling conductivity between Ti3C2Tx domains. Density functional theory (DFT) calculations reveal that the adsorption energy of NH3 on PDAC is the highest among the tested gases, which supports the selectivity of the sensor to this analyte. Benefiting from the protection conferred by the PDAC shell, the composite has a reliable operation period of at least 40 days. In addition, we demonstrated a flexible paper-based sensor of the Ti3C2Tx@PDAC composite, without attenuated performance upon mechanical deformation. This work proposed a novel mechanism and a feasible methodology to synthesize MXene-polymer composites with improved sensitivity and stability for chemical sensing.

Identification and validation of functional roles for three MYC-associated genes in hepatocellular carcinoma.

BACKGROUND: Aberrations in MYC underlie a large proportion of liver hepatocellular carcinoma (LIHC) cases; however, MYC is difficult to target because of its undruggable structure. We aimed to uncover MYC-associated molecular targets to provide new strategies for LIHC treatment. METHODS: LIHC transcriptome datasets and clinical information were obtained from The Cancer Genome Atlas. A series of bioinformatics analyses were performed for 370 patients who were stratified based on the median MYC expression level (high-MYC group and low-MYC group). Correlation analysis was performed to determine relationships between the expression of key MYC-associated genes and prognosis, DNA promotor methylation, and immune cell infiltration. Gene ontology and Kyoto Encyclopedia of Genes and Genomes Pathway enrichment analyses were performed to elucidate the functions of these genes in LIHC. Their expression and functions in LIHC were further verified using transgenic mice overexpressing c-Myc under control of the hepatocyte-specific promoter (Alb-Cre). RESULTS: AURKB, CCNB2, and CDKN3 were overexpressed in LIHC patients with high MYC expression and were associated with poor prognosis. Upregulation of these 3 genes was significantly correlated with hypomethylated promoter status, advanced T stage, metastasis, and immune cell infiltration in LIHC patients. Functional enrichment analyses indicated that these genes participate in the "p53 signaling pathway" and "cell cycle". Furthermore, RT-PCR and IHC analysis revealed that their mRNA and protein expression levels were upregulated in an Alb-Cre;cMYClsl/- mouse model. Drugs that target these 3 MYC-related genes were identified. CONCLUSION: Taken together, our results identify biomarkers of potential utility for managing liver cancer therapy owing to their significance in tumorigenesis, proliferation, and tumor immunity.

Highly Selective H2S Gas Sensor Based on Ti3C2Tx MXene-Organic Composites.

Cost-effective and high-performance H2S sensors are required for human health and environmental monitoring. 2D transition-metal carbides and nitrides (MXenes) are appealing candidates for gas sensing due to good conductivity and abundant surface functional groups but have been studied primarily for detecting NH3 and VOCs, with generally positive responses that are not highly selective to the target gases. Here, we report on a negative response of pristine Ti3C2Tx thin films for H2S gas sensing (in contrast to the other tested gases) and further optimization of the sensor performance using a composite of Ti3C2Tx flakes and conjugated polymers (poly[3,6-diamino-10-methylacridinium chloride-co-3,6-diaminoacridine-squaraine], PDS-Cl) with polar charged nitrogen. The composite, preserving the high selectivity of pristine Ti3C2Tx, exhibits an H2S sensing response of 2% at 5 ppm (a thirtyfold sensing enhancement) and a low limit of detection of 500 ppb. In addition, our density functional theory calculations indicate that the mixture of MXene surface functional groups needs to be taken into account to describe the sensing mechanism and the selectivity of the sensor in agreement with the experimental results. Thus, this report extends the application range of MXene-based composites to H2S sensors and deepens the understanding of their gas sensing mechanisms.

Super diffraction limit spectral imaging detection and material type identification of distant space objects.

The image information of distant objects shows a diffuse speckle pattern due to diffraction limit, non-uniform scattering, etc., which is difficult to achieve object discrimination. In this study, we have developed a staring spectral video imaging system mounted on a ground-based telescope observation platform to detect the high orbit space objects and gain their spectral images for six groups of GEO targets. The speckle remains basically the same characteristic as the projection structure of the object due to "the balloon inflation phenomenon of near parallel light during long-distance atmospheric transmission" under the premise of considering the bi-directional reflection distribution function (BRDF), Rayleigh scattering theory, and the memory effect. Based on this phenomenon, a mathematical model of remote target scattering spectrum imaging is established where the speckle can be treated as both a global speckle and speckle combination of texture blocks caused by various components of the target. The radial basis function (RBF) neural network is separately used to invert the global speckle and the speckle combination of the texture blocks on account of the typical target material database. The results show that the target materials are of relatively fewer kinds in the global inversion with only including gallium arsenide panel (GaAs) and carbon fiber (CF), for which the highest goodness of curve fitting is only 77.97. An improved algorithm makes their goodness of fit reach 90.29 and 93.33, respectively, in view of one conjecture that the target surface contains unknown materials. The spectral inversion result of the texture blocks shows that the types of materials in each target texture block increase significantly, and that the area ratio of different materials inverted in the block is different from each other. It is further confirmed that the speckle image contains the overall projection structure of distant target and the spectral image projection of each component is relatively fixed, which is the result of the comprehensive action of various mechanisms of ultra-long-haul atmospheric transmission and optical system focusing imaging after BRDF spectral scattering. The spectral image fine inversion is expected to restore the clear structure of the target. This discovery provides important support for the remote imaging and identification of distant and ultra-diffractive targets.

Validating the accuracy of a multifunctional smartwatch sphygmomanometer to monitor blood pressure.

BACKGROUND: Hypertension is the most modifiable factor associated with cardiovascular events and complications. The conventional blood pressure (BP) meter method is simple but is limited in terms of real-time monitoring abnormal BP. Therefore, the development of a multifunction smartwatch (HUAWEI WATCH D) sphygmomanometer could significantly improve integrated BP monitoring. METHODS: We enrolled 361 subjects from Chinese PLA General Hospital, Beijing, China to validate the accuracy of the smartwatch versatile sphygmomanometer using ISO 81060-2:2018. Resting and ambulatory BP accuracy of the smartwatch were compared with gold standard clinical sphygmomanometers using ISO 81060-2:2018 guidelines, the accuracy of 24 h systolic blood pressure (SBP) circadian rhythm monitoring, and diurnal high SBP alert for this smartwatch were assessed using a confusion matrix approach. Additionally, we analyzed online users of different ages for compliance. RESULTS: Eighty-five subjects underwent resting BP measurements; the mean resting BP differences between two devices were -0.683 ± 6.203 mmHg (SBP) (P = 0.723) and 1.628 ± 5.028 mmHg (diastolic blood pressure, DBP) (P = 0.183). In 35 subjects' ambulatory BP measurements, the mean differences of ambulatory BP were -1.943 ± 5.475 mmHg (SBP) (P = 0.923) and 3.195 ± 5.862 mmHg (DBP) (P = 0.065). All data complied with ISO 81060-2:2018 guidelines (mean ≤ ±5 mmHg and standard deviation ≤ ±8 mmHg) with no significant differences. Positive predictive values (PPV) of resting SBP and DBP were 0.635 and 0.671, respectively. The PPV of ambulatory SBP and DBP were 0.686. Also, 24 h SBP circadian rhythm monitoring was performed in 107 subjects: accuracy = 0.850, specificity = 0.864, precision/PPV = 0.833, sensitivity = 0.833, and F1-measure (F1) = 0.833. The accuracy, specificity, precision, sensitivity, and F1 values in 85 subjects undergoing diurnal high SBP alerting were 0.858, 0.876, 0.706, 0.809, and 0.754, respectively. CONCLUSIONS: When compared with the gold standard clinical sphygmomanometer, smartwatch results were consistent and accurate. Online user feedback showed that elderly individuals cared more about BP monitoring accuracy, with better compliance.

[Acupoit is the "transducer" in the physiochemical information coupling response of acupuncture].

Acupoint is the initial response site of acupuncture stimulus and also the source link of the effect onset of acupuncture. Acupuncture is a mechanical physical stimulus. How is the mechanical force of acupuncture transduced into neuroelectrical and biochemical signals at acupoint? How does the physiochemical information of acupoint launch acupuncture effect? All of these remain the common and crucial questions in the study of acupuncture effect mechanism. Physical changes are induced in the local tissue of acupoint by needling techniques, such as the deformation and displacement of muscle fibers, which may act on the nerve ending receptors and produce electroneurographic signals. Besides, these changes may activate the mechanosensitive ion channels of the cytomembrane in acupoint site. Through cellular signal transduction, the physical signals may be transformed into chemical ones to trigger the physiochemical coupling response of acupoint microenvironment. Eventually, acupuncture effect is generated via nerves and body fluids. "The mechanical force of acupuncture", through "the physiochemical transduction", promotes the body's perception and transmits acupuncture signals. It suggests that acupoint is the "transducer" in the physiochemical information coupling response of acupuncture.

Transgenic Schwann cells overexpressing POU6F1 promote sciatic nerve regeneration within acellular nerve allografts.

Objective.Acellular nerve allograft (ANA) is an effective surgical approach used to bridge the sciatic nerve gap. The molecular regulators of post-surgical recovery are not well-known. Here, we explored the effect of transgenic Schwann cells (SCs) overexpressing POU domain class 6, transcription factor 1 (POU6F1) on sciatic nerve regeneration within ANAs. We explored the functions of POU6F1 in nerve regeneration by using a cell model of H2O2-induced SCs injury and transplanting SCs overexpressing POU6F1 into ANA to repair sciatic nerve gaps.Approach.Using RNA-seq, Protein-Protein Interaction network analysis, gene ontology enrichment, and Kyoto Encyclopedia of Genes and Genomes pathway analysis, we identified a highly and differentially expressed transcription factor, POU6F1, following ANA treatment of sciatic nerve gap. Expressing a high degree of connectivity, POU6F1 was predicted to play a role in peripheral nervous system myelination.Main results.To test the role of POU6F1 in nerve regeneration after ANA, we infected SCs with adeno-associated virus-POU6F1, demonstrating that POU6F1 overexpression promotes proliferation, anti-apoptosis, and migration of SCsin vitro. We also found that POU6F1 significantly upregulated JNK1/2 and c-Jun phosphorylation and that selective JNK1/2 inhibition attenuated the effects of POU6F1 on proliferation, survival, migration, and JNK1/2 and c-Jun phosphorylation. The direct interaction of POU6F1 and activated JNK1/2 was subsequently confirmed by co-immunoprecipitation. In rat sciatic nerve injury model with a 10 mm gap, we confirmed the pattern of POU6F1 upregulation and co-localization with transplanted SCs. ANAs loaded with POU6F1-overexpressing SCs demonstrated the enhanced survival of transplanted SCs, axonal regeneration, myelination, and functional motor recovery compared to the ANA group loaded by SCs-only in line within vitrofindings.Significance.This study identifies POU6F1 as a novel regulator of post-injury sciatic nerve repair, acting through JNK/c-Jun signaling in SCs to optimize therapeutic outcomes in the ANA surgical approach.