Three-dimensional assessment of periodontal support of lower incisors for skeletal Class II malocclusion undergoing presurgical orthodontic treatment with different vertical skeletal patterns.

BACKGROUND: The aim of the present study was to compare periodontal support changes during retraction of mandibular anterior teeth for skeletal Class II malocclusion with different facial divergence and to analyze relevant factors influencing bone remodeling by applying three-dimensional (3D) cone-beam computed tomography (CBCT) reconstruction technology. METHODS: Forty-eight patients with Class II malocclusion requiring surgical orthodontic treatment enrolled in the study were divided into the hyperdivergent group (n = 16), normodivergent group (n = 16) and hypodivergent group (n = 16) according to their vertical skeletal patterns. Cone-beam computed tomography (CBCT) scans were obtained before treatment (T1) and after presurgical orthodontic treatment (T2). The two-dimensional (2D) alveolar bone morphology, movement of mandibular central incisors and volume of the alveolar bone around incisors were measured on the labial and lingual sides by 3D CBCT reconstruction technology. Statistical analyses were performed with one-way ANOVA, paired t tests and multiple linear regression. RESULTS: During presurgical orthodontic treatment, the alveolar bone height on the labial side of the hyperdivergent group decreased significantly (P ≤ 0.05), but was maintained in the normodivergent and hypodivergent groups (P > 0.05). However, the alveolar bone volume, alveolar bone thickness at each level and alveolar bone height on the lingual side decreased significantly for all the groups. Apart from the initial morphometric measurements at T1, the morphology of lingual alveolar bone at T2 was significantly influenced by the direction and amount of tooth movement. Horizontal retraction and vertical protrusion of the root apex were negatively related to the alveolar bone on the lingual side after presurgical orthodontic treatment. CONCLUSION: For Class II malocclusion patients undergoing presurgical orthodontic treatment, the changes in the periodontal support of the lower central incisors varied in different vertical skeletal patterns. There exists a great periodontal risk of alveolar bone resorption on the lingual side for various vertical types. To avoid alveolar bone deterioration, it is essential to investigate the bone remodeling of patients with different alveolar bone conditions and cautiously plan tooth movement prior to orthodontic treatment. Moreover, 3D measurements based on CBCT construction can provide complementary information to traditional 2D measurements.

Effect of augmented corticotomy-assisted presurgical orthodontic treatment on alveolar bone fenestration and dehiscence in skeletal class III patients.

Background/purpose: Alveolar bone fenestration and dehiscence is common in untreated patients and potentially harmful. This study was to evaluate the effect of augmented corticotomy (AC) on the prevention and treatment of alveolar bone defects in skeletal class III high-angle patients during presurgical orthodontic treatment (POT). Materials and methods: Fifty patients with skeletal Class III high-angle malocclusion were enrolled, of whom 25 patients (G1) underwent traditional POT and 25 patients (G2) received AC during POT. The alveolar bone fenestration and dehiscence around the upper and lower anterior teeth were measured by CBCT. The incidence and transition of fenestration and dehiscence in the two groups were compared by the chisquare and Mann‒Whitney rank-sum tests. Results: Before treatment (T0), the incidence of fenestration and dehiscence around the anterior teeth of all patients was 39.24% and 24.10%, respectively. After POT (T1), the incidence of fenestration in G1 and G2 was 49.83% and 25.86%, respectively, and the incidence of dehiscence in G1 and G2 was 58.08% and 32.07%, respectively. For teeth without fenestration and dehiscence at T0, more anterior teeth in G1 exhibited fenestration and dehiscence at T1 than in G2. For teeth with fenestration and dehiscence at T0, most transitions in G1 were maintained or worsened, but "cure" cases were observed in G2. After POT, the cure rates of fenestration and dehiscence in G2 were 80.95% and 91.07%, respectively. Conclusion: During the POT of skeletal Class III high-angle patients, augmented corticotomy can significantly treat and prevent alveolar bone fenestration and dehiscence around anterior teeth.

Accuracy of three-dimensional periodontal ligament models generated using cone-beam computed tomography at different resolutions for the assessment of periodontal bone loss.

Objective: To develop a method for generating three-dimensional (3D) digital models of the periodontal ligament (PDL) using 3D cone-beam computed tomography (CBCT) reconstruction and to evaluate the accuracy and agreement of the 3D PDL models in the measurement of periodontal bone loss. Methods: CBCT data collected from four patients with skeletal Class III malocclusion prior to periodontal surgery were reconstructed at three voxel sizes (0.2 mm, 0.25 mm, and 0.3 mm), and 3D tooth and alveolar bone models were generated to obtain digital PDL models for the maxillary and mandibular anterior teeth. Linear measurements of the alveolar bone crest obtained during periodontal surgery were compared with the digital measurements for assessment of the accuracy of the digital models. The agreement and reliability of the digital PDL models were analyzed using intra- and interexaminer correlation coefficients and Bland-Altman plots. Results: Digital models of the maxillary and mandibular anterior teeth, PDL, and alveolar bone of the four patients were successfully established. Relative to the intraoperative measurements, linear measurements obtained from the 3D digital models were accurate, and there were no significant differences among different voxel sizes at different sites. High diagnostic coincidence rates were found for the maxillary anterior teeth. The digital models showed high intra- and interexaminer agreement. Conclusions: Digital PDL models generated by 3D CBCT reconstruction can provide accurate and useful information regarding the alveolar crest morphology and facilitate reproducible measurements. This could assist clinicians in the evaluation of periodontal prognosis and establishment of an appropriate orthodontic treatment plan.

Augmented corticotomy-assisted presurgical orthodontic treatment to prevent alveolar bone loss in patients with skeletal Class III malocclusion.

INTRODUCTION: The objective of this study was to explore the effect of augmented corticotomy (AC) on anterior alveolar bone morphology in presurgical orthodontic treatment for skeletal Class III malocclusion. METHODS: Thirty-six surgical patients with skeletal Class III malocclusion with high-angle were included: 18 (AC group) accepted AC surgery during presurgical orthodontic treatment, and 18 (control group) accepted traditional presurgical orthodontic treatment. Cone-beam computed tomography scans were obtained before treatment (T0) and after presurgical orthodontic treatment (T1). The alveolar bone morphology, root length, dehiscence, and movement of mandibular central incisors were measured by cone-beam computed tomography using Dolphin software. Statistical analyses were performed with independent-sample t tests, paired t tests, and multiple linear regression. RESULTS: After presurgical orthodontic treatment, the whole alveolar bone thickness at each level, alveolar bone area, and alveolar bone height decreased significantly in the control group but increased or remained unchanged in the AC group. In the AC group, the lower the labial alveolar bone height at T0 was, the greater the increase after T1; the change in alveolar bone thickness was related to ΔL1-MP and sex. At T0, the incidences of dehiscence were similar in the 2 groups, ranging from 11.11% to 16.67%. At T1, the labial and lingual incidences of dehiscence in the AC group were 0% and 27.78%, compared with 55.56% and 66.67% in the control group. CONCLUSIONS: During presurgical orthodontic treatment, AC is effective in preventing alveolar bone resorption and dehiscence without additional root resorption. AC can be recommended for high-angle skeletal Class III patients with thin alveolar bone around anterior teeth during presurgical orthodontic treatment.

Three-dimensional measurement of periodontal support during surgical orthodontic treatment of high-angle skeletal Class III malocclusion: A retrospective study.

INTRODUCTION: This study aimed to quantify the periodontal health of incisors during surgical orthodontic treatment in patients with high-angle Class III malocclusion using a cone-beam computed tomography (CBCT) 3-dimensional (3D) reconstruction technique. METHODS: The sample consisted of 30 patients with high-angle Class III malocclusion (mean age, 20.53 ± 2.86 years). CBCT images were taken before treatment (T0), after presurgical orthodontic treatment, and after treatment (T2). In addition, 3D tooth and alveolar bone models were generated. The root surface area, periodontal ligament (PDL)_Area, and vertical bone level (VBL) around the maxillary and mandibular central incisors were measured. RESULTS: The root surface area and PDL_Area of maxillary and mandibular central incisors decreased continuously between T0 and T2 (P <0.01). At T2, mandibular central incisors showed 38.64 ± 13.39% PDL_Area loss, and maxillary central incisors exhibited 21.13 ± 16.48% PDL_Area loss. For mandibular central incisors, the PDL_Area loss caused by VBL loss was significantly greater than that for maxillary central incisors (P <0.01) and significantly greater than the PDL_Area loss caused by root resorption (P <0.01). From T0 to T2, the lingual surface of maxillary central incisors exhibited greater VBL loss than the other 3 surfaces (P <0.01), and the labial and lingual surfaces of mandibular central incisors demonstrated greater VBL loss than proximal surfaces (P <0.01). CONCLUSIONS: The 3D CBCT reconstruction method provides useful information regarding the periodontal defects of incisors in patients with high-angle skeletal Class III malocclusion. The PDL_Area of maxillary and mandibular central incisors decreased continuously during the treatment. Vertical alveolar bone levels at proximal surfaces appeared to be relatively stable.