Monolithically-grained perovskite solar cell with Mortise-Tenon structure for charge extraction balance.

Although the power conversion efficiency values of perovskite solar cells continue to be refreshed, it is still far from the theoretical Shockley-Queisser limit. Two major issues need to be addressed, including disorder crystallization of perovskite and unbalanced interface charge extraction, which limit further improvements in device efficiency. Herein, we develop a thermally polymerized additive as the polymer template in the perovskite film, which can form monolithic perovskite grain and a unique "Mortise-Tenon" structure after spin-coating hole-transport layer. Importantly, the suppressed non-radiative recombination and balanced interface charge extraction benefit from high-quality perovskite crystals and Mortise-Tenon structure, resulting in enhanced open-circuit voltage and fill-factor of the device. The PSCs achieve certified efficiency of 24.55% and maintain >95% initial efficiency over 1100 h in accordance with the ISOS-L-2 protocol, as well as excellent endurance according to the ISOS-D-3 accelerated aging test.

Tailored Polymeric Hole-Transporting Materials Inducing High-Quality Crystallization of Perovskite for Efficient Inverted Photovoltaic Devices.

For achieving high-performance p-i-n perovskite solar cells (PSCs), hole transporting materials (HTMs) are critical to device functionality and represent a major bottleneck to further enhancing device stability and efficiency in the inverted devices. Three dopant-free polymeric HTMs are developed based on different linkage sites of triphenylamine and phenylenevinylene repeating units in their main backbone structures. The backbone curvatures of the polymeric HTMs affect the morphology and hole mobility of the polymers and further change the crystallinity of perovskite films. By using PTA-mPV with moderate molecular curvature, p-i-n PSCs with high efficiency of 19.5% and long-term stability can be achieved. The better performance is attributed to the more effective hole extraction ability, higher charge-carrier mobility, and lower interfacial charge recombination. Furthermore, these three polymeric HTMs are synthesized without any noble metal catalyst, and show great advantages in future application owing to the low-cost.