A shape memory cationized chitosan sponge loaded with thrombin for high-effective hemostasis and antibacterial activity.

This study presents a thrombin-loaded cationized chitosan (TCCS) sponge with highly effective hemostatic and antibacterial activity. The TCCS sponge, prepared using a multistep method, features a porous structure, favorable mechanical properties, excellent water absorption ability, and shape recovery triggered by water or blood. The TCCS sponge exhibited strong antibacterial activity against Methicillin-resistant Staphylococcus aureus and Escherichia coli. Additionally, it demonstrated enhanced procoagulant and hemostatic efficacy in rat tail amputation and rat liver perforation wound models compared to commercial hemostats. Furthermore, the sponge exhibited favorable biocompatibility and biosafety. These findings suggest that the TCCS sponge has substantial potential for practical applications in managing severe hemorrhages and bacterial infections.

The anomalous effect of electric field on friction for microscale structural superlubric graphite/Au contact.

The current-carrying friction characteristics are crucial for the performance of a sliding electrical contact, which plays critical roles in numerous electrical machines and devices. However, these characteristics are influenced by multiple factors such as material surface quality, chemical reactions, and atmospheric environment, leading to a challenge for researchers to comprehensively consider these impacts. Structural superlubricity (SSL), a state of nearly zero friction and no wear between contact solid surfaces, provides an ideal experimental system for these studies. Here, with microscale graphite flakes on atomic-flattened Au surface under applied voltages, we observed two opposite friction phenomena, depending only on whether the edge of graphite flake was in contact with the Au substrate. When in contact the friction force would increase with an increasing voltage, otherwise, the friction force would decrease. Notably, when the voltage was turned off, the friction force quickly recovered to its original level, indicating the absence of wear. Through atmosphere control and molecular dynamics simulations, we revealed the mechanism to be the different roles played by the water molecules confined at the interface or adsorbed near the edges. Our experimental results demonstrate the remarkable tunable and robust frictional properties of SSL under an electrical field, providing an ideal system for the fundamental research of not only sliding electrical contacts, but also novel devices which demand tunable frictions.

Inhomogeneous Fluid Transport Modeling in Dual-Scale Porous Media Considering Fluid-Solid Interactions.

Dynamics of fluid transport in ultratight reservoirs such as organic-rich shales differ from those in high-permeable reservoirs due to the complex nature of fluid transport and fluid-solid interaction in nanopores. We present a multiphase multicomponent transport model for primary production and gas injection in shale, considering the dual-scale porosity and intricate fluid-solid interactions. The pore space in the shale matrix is divided into macropores and nanopores based on pore size distribution. We employ density functional theory (DFT) to account for fluid-solid interactions and to compute the inhomogeneous fluid density distribution and phase behavior within a dual-scale matrix. The calculated fluid thermodynamic properties and transmissibility values are then integrated into the multiphase multicomponent transport model grounded in Maxwell-Stefan theory to simulate primary oil production from and gas injection into organic-rich shales. Our findings highlight DFT's adeptness in detailing the complex fluid inhomogeneities within nanopores─a critical concept that a cubic equation of state does not capture. Fluids within pores are categorized into confined and bulk states, restricted by a threshold pore width of 30 nm. Different compositions of fluid mixtures are observed in macropores and nanopores: heavier hydrocarbon components preferentially accumulate in nanopores due to their strong fluid-solid interactions. We utilize the developed model to simulate hydrocarbon production from an organic-rich shale matrix as well as CO2 injection into the matrix. During primary hydrocarbon production, strong fluid-solid interactions in nanopores impede the mobility of heavy components in the near-wall region, leading to their confinement. Consequently, heavy components mostly remain within the nanopores in the shale matrix during primary hydrocarbon production. During the CO2 injection process, the injected CO2 alters fluid composition within macropores and nanopores, promoting fluid redistribution. Injected CO2 engages in competitive fluid-solid interactions against intermediate hydrocarbons, successfully displacing a considerable number of these hydrocarbons from the nanopores.

Cysteine triggered cascade reaction forming coumarin: Visualization of cysteine fluctuation in alcoholic liver disease by a NIR fluorescent probe.

Alcoholic liver disease (ALD) is a chronic toxic liver injury caused by long-term heavy drinking. Due to the increasing incidence, ALD is becoming one of important medical tasks. Many studies have shown that the main mechanism of liver damage caused by large amounts of alcohol may be related to antioxidant stress. As an important antioxidant, cysteine (Cys) is involved in maintaining the normal redox balance and detoxifying metabolic function of the liver, which may be closely related to the pathogenesis of ALD. Therefore, it is necessary to develop a simple non-invasive method for rapid monitoring of Cys in liver. Thus, a near-infrared (NIR) fluorescent probe DCI-Ac-Cys which undergoes Cys triggered cascade reaction to form coumarin fluorophore is developed. Using the DCI-Ac-Cys, decreased Cys was observed in the liver of ALD mice. Importantly, different levels of Cys were monitored in the livers of ALD mice taking silybin and curcumin with the antioxidant effects, indicating the excellent therapeutic effect on ALD. This study provides the important references for the accurate diagnosis of ALD and the pharmacodynamic evaluation of silybin and curcumin in the treatment of ALD, and support new ideas for the pathogenesis of ALD.

An Innovative Aggregation-Induced Emission-Based NIR Fluorescent Probe for Visualizing Carboxylesterases in Living Cells, Zebrafish, and Tumor-Bearing Mice.

In the human body, carboxylesterases (CEs) play crucial roles in xenobiotic metabolism and lipid homeostasis. But abnormal expression of CEs is highly associated with some diseases, such as hyperlipidemia, diabetes, and liver cancer. Therefore, it is of great importance to develop an efficient tool for the accurate detection of CEs in living organisms. Herein, an innovative near-infrared (NIR) fluorescent probe, TTAP-AB, was designed for CE detection based on the aggregation-induced emission (AIE) mechanism. This probe exhibits rapid response (2 min), excellent sensitivity (limit of detection = 8.14 × 10-6 U/mL), and high selectivity to CEs. Additionally, owing to its good biocompatibility, the TTAP-AB probe enables the monitoring of dynamic changes in CE levels under drug-induced modulation in living cells and zebrafish. More importantly, the TTAP-AB probe was successfully employed to image liver tumors and assist in tumor resection through the real-time monitoring of CEs, indicating that TTAP-AB is promising to guide liver cancer surgery. Therefore, the TTAP-AB probe can not only enrich the strategies for CE detection in biological systems but also has great potential for some clinical imaging applications, including medical diagnosis, preclinical research, and imaging-guided surgery.

Complex Pulmonary Arteriovenous Fistula Presented With Ventricular Tachycardia and Type 2 Acute Myocardial Infarction.

Pulmonary arteriovenous fistula (PAVF) is a rare congenital vascular malformation primarily manifested as dyspnea, migraine, ischemic stroke, hemoptysis, and nervous system complications. However, in our case, an 18-year-old male patient with PAVF presented with sudden onset of ventricular tachycardia and type 2 acute myocardial infarction as initial symptoms. A diagnosis was achieved through pulmonary artery computer tomography angiography (CTA) and three-dimensional (3D) computed tomography (CT) reconstruction, revealing a complex and giant PAVF. Following multidisciplinary team (MDT) consultation, the patient underwent thoracoscopic surgery and experienced a successful recovery during follow-up.

GPR34 senses demyelination to promote neuroinflammation and pathologies.

Sterile neuroinflammation is a major driver of multiple neurological diseases. Myelin debris can act as an inflammatory stimulus to promote inflammation and pathologies, but the mechanism is poorly understood. Here, we showed that lysophosphatidylserine (LysoPS)-GPR34 axis played a critical role in microglia-mediated myelin debris sensing and the subsequent neuroinflammation. Myelin debris-induced microglia activation and proinflammatory cytokine expression relied on its lipid component LysoPS. Both myelin debris and LysoPS promoted microglia activation and the production of proinflammatory cytokines via GPR34 and its downstream PI3K-AKT and ERK signaling. In vivo, reducing the content of LysoPS in myelin or inhibition of GPR34 with genetic or pharmacological approaches reduced neuroinflammation and pathologies in the mouse models of multiple sclerosis and stroke. Thus, our results identify GPR34 as a key receptor to sense demyelination and CNS damage and promote neuroinflammation, and suggest it as a potential therapeutic target for demyelination-associated diseases.

LASSO-derived nomogram for early identification of pediatric monogenic lupus.

BACKGROUND: Monogenic lupus is defined as systemic lupus erythematosus (SLE)/SLE-like patients with either dominantly or recessively inherited pathogenic variants in a single gene with high penetrance. However, because the clinical phenotype of monogenic SLE is extensive and overlaps with that of classical SLE, it causes a delay in diagnosis and treatment. Currently, there is a lack of early identification models for clinical practitioners to provide early clues for recognition. Our goal was to create a clinical model for the early identification of pediatric monogenic lupus, thereby facilitating early and precise diagnosis and treatment for patients. METHODS: This retrospective cohort study consisted of 41 cases of monogenic lupus treated at the Department of Pediatrics at Peking Union Medical College Hospital from June 2012 to December 2022. The control group consisted of classical SLE patients recruited at a 1:2 ratio. Patients were randomly divided into a training group and a validation group at a 7:3 ratio. A logistic regression model was established based on the least absolute shrinkage and selection operator to generate the coefficient plot. The predictive ability of the model was evaluated using receiver operator characteristic curves and the area under the curve (AUC) index. RESULTS: A total of 41 cases of monogenic lupus patients and 82 cases of classical SLE patients were included. Among the monogenic lupus cases (with a male-to-female ratio of 1:1.05 and ages of onset ranging from birth to 15 years), a total of 18 gene mutations were identified. The variables included in the coefficient plot were age of onset, recurrent infections, intracranial calcifications, growth and developmental delay, abnormal muscle tone, lymphadenopathy/hepatosplenomegaly, and chilblain-like skin rash. Our model demonstrated satisfactory diagnostic performance through internal validation, with an AUC value of 0.97 (95% confidence interval = 0.92-0.97). CONCLUSIONS: We summarized and analyzed the clinical characteristics of pediatric monogenic lupus and developed a predictive model for early identification by clinicians. Clinicians should exercise high vigilance for monogenic lupus when the score exceeds - 9.032299.

Elucidating the catalytic mechanism of Prussian blue nanozymes with self-increasing catalytic activity.

Although Prussian blue nanozymes (PBNZ) are widely applied in various fields, their catalytic mechanisms remain elusive. Here, we investigate the long-term catalytic performance of PBNZ as peroxidase (POD) and catalase (CAT) mimetics to elucidate their lifespan and underlying mechanisms. Unlike our previously reported Fe3O4 nanozymes, which exhibit depletable POD-like activity, the POD and CAT-like activities of PBNZ not only persist but slightly enhance over prolonged catalysis. We demonstrate that the irreversible oxidation of PBNZ significantly promotes catalysis, leading to self-increasing catalytic activities. The catalytic process of the pre-oxidized PBNZ can be initiated through either the conduction band pathway or the valence band pathway. In summary, we reveal that PBNZ follows a dual-path electron transfer mechanism during the POD and CAT-like catalysis, offering the advantage of a long service life.

Effect of supercritical carbon dioxide on protein structure modification and antimicrobial peptides production of Mongolian cheese and its in vitro digestion.

The aim of this research was to investigate the effects of supercritical carbon dioxide (SC-CO2) treatment on protein structure in Mongolian cheese. The peptides during the digestive process of the SC-CO2 treated cheese were also studied. SC-CO2 technology was utilized to treat Mongolian cheese at three temperatures (45, 55 and 65 °C) and three pressures (7.5, 12.5 and 17.5 MPa). The results of fluorescence, ultraviolet-visible, Fourier transform infrared spectroscopy and free sulfhydryl groups showed that SC-CO2, particularly at 65 °C and 17.5 MPa, modified the protein structure in Mongolian cheese effectively. The data of LC-MS/MS-based peptidomics showed that the content of antimicrobial peptides found in the SC-CO2 treated Mongolian cheese was 1.55 times that of the untreated Mongolian cheese; the content of unique antimicrobial peptides in the digested SC-CO2 treated Mongolian cheese was 1.46 times that of the digested untreated Mongolian cheese, which proved that SC-CO2 could help produce antimicrobial peptides in cheese not only during the process of SC-CO2 treatment but during subsequent simulated gastrointestinal digestion as well. In conclusion, SC-CO2 could be considered a promising method to develop cheese products with potential health benefits.

The duality of sulfate-reducing bacteria: Reducing methylmercury production in rhizosphere but enhancing accumulation in rice plants.

Sulfate-reducing bacteria (SRB) are known to alter methylmercury (MeHg) production in paddy soil, but the effect of SRB on MeHg dynamics in rhizosphere and rice plants remains to be fully elucidated. The present study investigated the impact of SRB on MeHg levels in unsterilized and γ-sterilized mercury-polluted paddy soils, with the aim to close this knowledge gap. Results showed that the presence of SRB reduced MeHg production by ∼22 % and ∼17 % in the two soils, but elevated MeHg contents by approximately 55 % and 99 % in rice grains, respectively. Similar trend at smaller scales were seen in roots and shoots. SRB inoculation exerted the most profound impact on amino acid metabolism in roots, with the relative response of L-arginine positively linking to MeHg concentrations in rhizosphere. The SRB-induced enrichment of MeHg in rice plants may be interpreted by the stronger presence of endophytic nitrogen-related microbes (e.g. Methylocaldum, Hyphomicrobium and Methylocystis) and TGA transcription factors interacting with glutathione metabolism and calmodulin. Our study provides valuable insights into the complex effects of SRB inoculation on MeHg dynamics in rice ecosystems, and may help to develop strategies to effectively control MeHg accumulation in rice grains.

Tribological behavior of graphene/h-BN vdW heterostructures: the role of defects at the BN layer.

Molecular dynamics simulations and first principles calculations were performed to study the tribological behavior of graphene/h-BN (G/h-BN) heterostructures with vacancy and Stone-Wales (SW) defect under uniform normal load, revealing the mechanism of the effect of defect types on friction, and discussing the coupling effect of temperature and interfacial defects on the tribological behavior of G/h-BN heterostructures. Under the normal force of 0.2 nN/atom, the friction force of the four systems is 0.0057, 0.0096, 0.0077, and 0.26 nN, respectively. The friction force of SW defect heterostructure is 45 times that of perfect interface heterostructure. The influence of defect type on friction force is SW > SV > DV. By observing the dynamic change of theZ-direction coordinate position of the sliding layer atoms, the slip potential energy curves and the evolution law of the moiré pattern, the relationship between the structural morphology and the energy change of different defective heterostructures and the frictional behavior was investigated comprehensively and intuitively for the first time. From the perspective of atomic strain, the deformation of heterostructures at the atomic level was quantified. The results showed that at 300 K and 0 K, the maximum strain of atoms in the sliding layer was 11.25% and 9.85%, respectively. The thermal perturbation mainly occurs in the out-of-plane direction, which in turn affects the friction. Through density functional theory, it is found that under uniform load, it is difficult to form bonds between the graphene sliding layer and the substrate layer when the defects are in the h-BN substrate layer, which has less influence on the friction of the system, thus making the defective heterostructures also remainsuperlubricity state. These results provide a new understanding of the interfacial friction of G/h-BN defective heterostructure.

Robust structural superlubricity under gigapascal pressures.

Structural superlubricity (SSL) is a state of contact with no wear and ultralow friction. SSL has been characterized at contact with van der Waals (vdW) layered materials, while its stability under extreme loading conditions has not been assessed. By designing both self-mated and non-self-mated vdW contacts with materials chosen for their high strengths, we report outstanding robustness of SSL under very high pressures in experiments. The incommensurate self-mated vdW contact between graphite interfaces can maintain the state of SSL under a pressure no lower than 9.45 GPa, and the non-self-mated vdW contact between a tungsten tip and graphite substrate remains stable up to 3.74 GPa. Beyond this critical pressure, wear is activated, signaling the breakdown of vdW contacts and SSL. This unexpectedly strong pressure-resistance and wear-free feature of SSL breaks down the picture of progressive wear. Atomistic simulations show that lattice destruction at the vdW contact by pressure-assisted bonding triggers wear through shear-induced tearing of the single-atomic layers. The correlation between the breakdown pressure and material properties shows that the bulk modulus and the first ionization energy are the most relevant factors, indicating the combined structural and electronic effects. Impressively, the breakdown pressures defined by the SSL interface could even exceed the strength of materials in contact, demonstrating the robustness of SSL. These findings offer a fundamental understanding of wear at the vdW contacts and guide the design of SSL-enabled applications.

Study on the interaction mechanism of whey protein isolate with phosphatidylcholine: By multispectral methods and molecular docking.

The elucidation of the interaction mechanism between phospholipids and milk proteins within emulsions is pivotal for comprehending the properties of infant formula fat globules. In this study, multispectral methods and molecular docking were employed to explore the relationship between phosphatidylcholine (PC) and whey protein isolate (WPI). Observations indicate that the binding constant, alongside thermodynamic parameters, diminishes as temperature ascends, hinting at a predominantly static quenching mechanism. Predominantly, van der Waals forces and hydrogen bonds constitute the core interactions between WPI and PC. This assertion is further substantiated by Fourier transform infrared spectroscopy, which verifies PC's influence on WPI's secondary structure. A detailed assessment of thermodynamic parameters coupled with molecular docking reveals that PC predominantly adheres to specific sites within α-lactalbumin, ß-lactoglobulin, and bovine serum albumin, propelled by a synergy of hydrophobic interactions, hydrogen bonding, and van der Waals forces, with binding energies noted at -5.59, -6.71, and -7.85 kcal/mol, respectively. An increment in PC concentration is observed to amplify the emulsification properties of WPI whilst concurrently diminishing the zeta potential. This study establishes a theoretical foundation for applying the PC-WPI interaction mechanism in food.

A Mitochondria-Targeting Fluorescent Probe for the Dual Sensing of Hypochlorite and Viscosity without Signal Crosstalk in Living Cells and Zebrafish.

Hypochlorite (ClO-) and viscosity both affect the physiological state of mitochondria, and their abnormal levels are closely related to many common diseases. Therefore, it is vitally important to develop mitochondria-targeting fluorescent probes for the dual sensing of ClO- and viscosity. Herein, we have explored a new fluorescent probe, XTAP-Bn, which responds sensitively to ClO- and viscosity with off-on fluorescence changes at 558 and 765 nm, respectively. Because the emission wavelength gap is more than 200 nm, XTAP-Bn can effectively eliminate the signal crosstalk during the simultaneous detection of ClO- and viscosity. In addition, XTAP-Bn has several advantages, including high selectivity, rapid response, good water solubility, low cytotoxicity, and excellent mitochondrial-targeting ability. More importantly, probe XTAP-Bn is successfully employed to monitor the dynamic change in ClO- and viscosity levels in the mitochondria of living cells and zebrafish. This study not only provides a reliable tool for identifying mitochondrial dysfunction but also offers a potential approach for the early diagnosis of mitochondrial-related diseases.

Structural biology of terpene synthases.

Structural biology research of terpene synthases (TSs) has provided a useful basis to understand their catalytic mechanisms in producing diverse terpene products with polycyclic ring systems and multiple chiral centers. However, compared to the large numbers of>95,000 terpenoids discovered to date, few structures of TSs have been solved and the understanding of their catalytic mechanisms is lagging. We here (i) introduce the basic catalytic logic, the structural architectures, and the metal-binding conserved motifs of TSs; (ii) provide detailed experimental procedures, in gene cloning and plasmid construction, protein purification, crystallization, X-ray diffraction data collection and structural elucidation, for structural biology research of TSs; and (iii) discuss the prospects of structure-based engineering and de novo design of TSs in generating valuable terpene molecules, which cannot be easily achieved by chemical synthesis.

IGBT Gate Boost Drive Technology for Promoting the Overload Capacity of Traction Converter.

Under certain circumstances, a high-speed railway may require constant acceleration or emergency braking, in which case the inverter may experience short-term overload conditions and the current passing through the IGBT will go beyond the rated design tolerance. Under overload conditions, the IGBT loss will increase instantly, raising the power semiconductor device's junction temperature in the process. This research examines the boosting-gate-voltage-driven IGBT control technology. It increases the gate drive voltage and the IGBT current capacity and decreases the conduction voltage drop of IGBT under short-term overload conditions, reducing the instantaneous loss and temperature rise undulation of IGBT. The working characteristics of IGBT devices are studied, and the influence of gate drive voltage on device loss and temperature rise fluctuations is analyzed. Based on the emergency acceleration and brake conditions of the actual train operation, the short-term overload characteristics of the inverter are analyzed. The optimization analysis of the boosting gate voltage under emergency conditions is carried out, and the IGBT drive circuit with gate voltage pumping function is designed. The effectiveness of the driving circuit is verified through PSpice simulation and actual switching characteristic test. According to the analysis of experimental data, it can be verified that increasing the gate voltage technology can reduce IGBT losses.

Comparative optimization of polysaccharide-based nanoformulations for cardiac RNAi therapy.

Ionotropic gelation is widely used to fabricate targeting nanoparticles (NPs) with polysaccharides, leveraging their recognition by specific lectins. Despite the fabrication scheme simply involves self-assembly of differently charged components in a straightforward manner, the identification of a potent combinatory formulation is usually limited by structural diversity in compound collections and trivial screen process, imposing crucial challenges for efficient formulation design and optimization. Herein, we report a diversity-oriented combinatory formulation screen scheme to identify potent gene delivery cargo in the context of precision cardiac therapy. Distinct categories of cationic compounds are tested to construct RNA delivery system with an ionic polysaccharide framework, utilizing a high-throughput microfluidics workstation coupled with streamlined NPs characterization system in an automatic, step-wise manner. Sequential computational aided interpretation provides insights in formulation optimization in a broader scenario, highlighting the usefulness of compound library diversity. As a result, the out-of-bag NPs, termed as GluCARDIA NPs, are utilized for loading therapeutic RNA to ameliorate cardiac reperfusion damages and promote the long-term prognosis. Overall, this work presents a generalizable formulation design strategy for polysaccharides, offering design principles for combinatory formulation screen and insights for efficient formulation identification and optimization.

Miniscope Recording Calcium Signals at Hippocampus of Mice Navigating an Odor Plume.

Mice navigate an odor plume with a complex spatiotemporal structure in the dark to find the source of odorants. This article describes a protocol to monitor behavior and record Ca 2+ transients in dorsal CA1 stratum pyramidale neurons in hippocampus (dCA1) in mice navigating an odor plume in a 50 cm x 50 cm x 25 cm odor arena. An epifluorescence miniscope focused through a GRIN lens imaged Ca 2+ transients in dCA1 neurons expressing the calcium sensor GCaMP6f in Thy1-GCaMP6f mice. The paper describes the behavioral protocol to train the mice to perform this odor plume navigation task in an automated odor arena. The methods include a step-by-step procedure for the surgery for GRIN lens implantation and baseplate placement for imaging GCaMP6f in CA1. The article provides information on real-time tracking of the mouse position to automate the start of the trials and delivery of a sugar water reward. In addition, the protocol includes information on using of an interface board to synchronize metadata describing the automation of the odor navigation task and frame times for the miniscope and a digital camera tracking mouse position. Moreover, the methods delineate the pipeline used to process GCaMP6f fluorescence movies by motion correction using NorMCorre followed by identification of regions of interest with EXTRACT. Finally, the paper describes an artificial neural network approach to decode spatial paths from CA1 neural ensemble activity to predict mouse navigation of the odor plume. SUMMARY: This protocol describes how to investigate the brain-behavior relationship in hippocampal CA1 in mice navigating an odor plume. This article provides a step-by-step protocol, including the surgery to access imaging of the hippocampus, behavioral training, miniscope GCaMP6f recording and processing of the brain and behavioral data to decode the mouse position from ROI neural activity.

Edge-enhanced super microgenerator based on a two-dimensional Schottky junction.

Super microgenerator (SMG) refers to a generator that can efficiently convert extremely weak external stimuli into electrical energy and has a small size, high power density and long lifespan, offer ground-breaking solutions for powering wearable devices, wireless distributed sensors and implanted medical equipment. However, the friction and wear between the interfaces of ordinary microgenerator results in an extremely low lifespan. Here, we present a prototype of SMGs based on a 2D-2D (graphite-MoS2) Schottky contact in the state of structural superlubricity (no wear and nearly zero friction between two contacted solid surfaces). What is even more interesting is when the graphite flake is slid from the bulk to the edge of MoS2, the output current will enhance from 31 to 56 A m-2. Through the I-V curve measurement, we found that the conductive channel across the junction can be activated and further enhanced at the edge of MoS2compare to bulk, which provide the explanation for the above-mentioned edge enhancement of power generation. Above results provide the design principles of high-performance SMGs based on 2D-2D Schottky junctions.