ABSTRACT
Herein, we present a high efficiency system based on biochar loaded with layered manganese dioxide to remove tetracycline and heavy metals from livestock wastewater. Under the optimal conditions, the degradation efficiencies of TC in the δ-MnO2/BC/PS system were 85.5% at 25 °C and 38.5% at 5 °C. Radical quenching experiments revealed that radical reactions in the δ-MnO2/BC/PS system were weak under 15 °C. Adsorption degradation experiments showed that the system maintained good adsorption performance at 5 °C. Galvanic cell experiments and cyclic voltammetry showed that the δ-MnO2/BC material had good electrochemical activity and high stability in response to temperature, indicating that TC was degraded by a nonradical pathway that was not limited by temperature, such as electron transfer. Copper ion was important coadsorbent and coactivator of the reaction system. Furthermore, FTIR, XPS, and X-ray diffraction (XRD) analyses showed that Cu(II) in the system was involved in changing the manganese valence state in the δ-MnO2/BC material and increasing the -OH content of BC. Comparison of the different products generated during metabolic testing revealed that the reaction pathway of the system at low temperature (5 °C) differed from that at normal temperature (25 °C). The δ-MnO2/BC material demonstrated good removal ability for antibiotics and heavy metals at normal and low temperatures in actual biogas slurry. The study provides insight for improving the efficiency of environmentally friendly treatments of aquaculture wastewater in cold regions, which is of great significance for resource utilization.
Subject(s)
Anti-Bacterial Agents , Charcoal , Copper , Manganese Compounds , Metals, Heavy , Oxides , Waste Disposal, Fluid , Wastewater , Water Pollutants, Chemical , Manganese Compounds/chemistry , Wastewater/chemistry , Water Pollutants, Chemical/chemistry , Oxides/chemistry , Charcoal/chemistry , Copper/chemistry , Metals, Heavy/chemistry , Adsorption , Anti-Bacterial Agents/chemistry , Waste Disposal, Fluid/methods , Sulfates/chemistry , Cold Temperature , TemperatureABSTRACT
Porous copper (Cu) current collectors show promise in stabilizing Li metal anodes (LMAs). However, insufficient lithiophilicity of pure Cu and limited porosity in three-dimensional (3D) porous Cu structures led to an inefficient Li-Cu composite preparation and poor electrochemical performance of Li-Cu composite anodes. Herein, we propose a porous Cu-CuZn (DG-CCZ) host for Li composite anodes to tackle these issues. This architecture features a pore size distribution and lithiophilic-lithiophobic characteristics designed in a gradient distribution from the inside to the outside of the anode structure. This dual-gradient porous Cu-CuZn exhibits exceptional capillary wettability to molten Li and provides a high porosity of up to 66.05%. This design promotes preferential Li deposition in the interior of the porous structure during battery operation, effectively inhibiting Li dendrite formation. Consequently, all cell systems achieve significantly improved cycling stability, including Li half-cells, Li-Li symmetric cells, and Li-LFP full cells. When paired synergistically with the double-coated LiFePO4 cathode, the pouch cell configured with multiple electrodes demonstrates an impressive discharge capacity of 159.3 mAh g-1 at 1C. We believe this study can inspire the design of future 3D Li anodes with enhanced Li utilization efficiency and facilitate the development of future high-energy Li metal batteries.
ABSTRACT
Tunnel-type vanadium oxides are promising cathodes for aqueous zinc ion batteries. However, unlike layer-type cathodes with adjustable layer distances, enhancing ion-transport kinetics in tunnels characterized by fixed sizes poses a considerable challenge. This study highlights that the macroscopic arrangement of the electrode crucially determines tunnel orientation, thereby influencing ion transport. By changing the material morphology, the tunnel orientation can be optimized to facilitate rapid ion diffusion. In a proof-of-concept demonstration, it is revealed that (00l) facets-dominated VO2 (B) nanobelts with dispersive morphology (VO2-D) tend to adopt a stacking pattern with directional ion transport along the c-axis on the electrode and guarantee fast ion diffusion. Compared with the aggregated sample (VO2-A) that tends to random arrangement on the electrode with isotropic and slow ion transfer behavior, the electrode featuring dispersive (00l) facets-dominated VO2 (B) nanobelts displays directional and fast ion diffusion behavior, thus exhibits an ultrahigh-rate performance (420.8 and 344.8 mAh g-1 at 0.1 and 10 A g-1, respectively) and long cycling stability (84.3% capacity retention under 5000 cycles at 10 A g-1). The results suggest that simultaneous manipulation of exposed crystal facet and morphology-related electrode arrangement should be promising for boosting the ion-transport kinetics in tunnel-type vanadium oxide cathodes.
ABSTRACT
Antibiotic exist in various states after entering agricultural soil through the application of manure, including the aqueous state (I), which can be directly absorbed by plants, and the auxiliary organic extraction state (III), which is closely associated with the pseudo-permanence of antibiotics. However, effective analytical methods for extracting and affecting factors on fractions of different antibiotic states remain unclear. In this study, KCl, acetonitrile/Na2EDTA-McIlvaine buffer, and acetonitrile/water were successively used to extract states I, II, and III of 21 antibiotics in soil, and the recovery efficiency met the quantitative requirements. Random forest classification and variance partitioning analysis revealed that dissolved organic matter, pH, and organic matter were important factors affecting the recovery efficiency of antibiotic in states I, II, and III, respectively. Additionally, 65-day spiked soil experiments combined with Mantel test analysis suggested that pH, organic acids, heavy metals, and noncrystalline minerals differentially affected antibiotic type and state. Importantly, a structural equation model indicated that organic acids play a crucial role in the fraction of antibiotic states. Overall, this study reveals the factors influencing the fraction of different antibiotic states in soil, which is helpful for accurately assessing their ecological risk.
Subject(s)
Metals, Heavy , Soil Pollutants , Soil/chemistry , Anti-Bacterial Agents , Metals, Heavy/analysis , Agriculture , Organic Chemicals/analysis , Acetonitriles , Soil Pollutants/analysisABSTRACT
For the purpose of determining the placement of Calyptraeidae within the Littorinimorpha, we hereby furnish a thorough analysis of the mitochondrial genome (mitogenome) sequence of Desmaulus extinctorium. This mitogenome spans 16,605 base pairs and encompasses the entire set of 37 genes, including 13 PCGs, 22 tRNAs and two rRNAs, with an evident AT bias. Notably, tRNASer1 and tRNASer2 lack dihydrouracil (DHU) arms, resulting in an inability to form a secondary structure. Similarly, tRNAAla lacks a TΨC arm, rendering it incapable of forming a secondary structure. In contrast, the remaining tRNAs demonstrate a characteristic secondary structure reminiscent of a cloverleaf. A comparison with ancestral gastropods reveals distinct differences in three gene clusters (or genes), encompassing 15 tRNAs and eight PCGs. Notably, inversions and translocations represent the major types of rearrangements observed in D. extinctorium. Phylogenetic analysis demonstrates robust support for a monophyletic grouping of all Littorinimorpha species, with D. extinctorium representing a distinct Calyptraeoidea clade. In summary, this investigation provides the first complete mitochondrial dataset for a species of the Calyptraeidae, thus providing novel insights into the phylogenetic relationships within the Littorinimorpha.
Subject(s)
Gastropoda , Genome, Mitochondrial , Animals , Phylogeny , Gastropoda/genetics , RNA, Transfer/genetics , RNA, Ribosomal/geneticsABSTRACT
Rechargeable aqueous zinc batteries are promising but hindered by unfavorable dendrite growth and side reactions on zinc anodes. In this study, we demonstrate a fast melting-solidification approach for effectively converting commercial Zn foils into single (002)-textured Zn featuring millimeter-sized grains. The melting process eliminates initial texture, residual stress, and grain size variations in diverse commercial Zn foils, guaranteeing the uniformity of commercial Zn foils into single (002)-textured Zn. The single (002)-texture ensures large-scale epitaxial and dense Zn deposition, while the reduction in grain boundaries significantly minimizes intergranular reactions. These features enable large grain single (002)-textured Zn shows planar and dense Zn deposition under harsh conditions (100â mA cm-2, 100â mAh cm-2), impressive reversibility in Zn||Zn symmetric cell (3280â h under 1â mA cm-2, 830â h under 10â mAh cm-2), and long cycling stability over 180â h with a high depth of discharge value of 75 %. This study successfully addresses the issue of uncontrollable texture formation in Zn foils following routine annealing treatments with temperatures below the Zn melting point. The findings of this study establish a highly efficient strategy for fabricating highly reversible single (002)-textured Zn anodes.
ABSTRACT
ABSTRACT: Venetoclax, the first-generation inhibitor of the apoptosis regulator B-cell lymphoma 2 (BCL2), disrupts the interaction between BCL2 and proapoptotic proteins, promoting the apoptosis in malignant cells. Venetoclax is the mainstay of therapy for relapsed chronic lymphocytic leukemia and is under investigation in multiple clinical trials for the treatment of various cancers. Although venetoclax treatment can result in high rates of durable remission, relapse has been widely observed, indicating the emergence of drug resistance. The G101V mutation in BCL2 is frequently observed in patients who relapsed treated with venetoclax and sufficient to confer resistance to venetoclax by interfering with compound binding. Therefore, the development of next-generation BCL2 inhibitors to overcome drug resistance is urgently needed. In this study, we discovered that sonrotoclax, a potent and selective BCL2 inhibitor, demonstrates stronger cytotoxic activity in various hematologic cancer cells and more profound tumor growth inhibition in multiple hematologic tumor models than venetoclax. Notably, sonrotoclax effectively inhibits venetoclax-resistant BCL2 variants, such as G101V. The crystal structures of wild-type BCL2/BCL2 G101V in complex with sonrotoclax revealed that sonrotoclax adopts a novel binding mode within the P2 pocket of BCL2 and could explain why sonrotoclax maintains stronger potency than venetoclax against the G101V mutant. In summary, sonrotoclax emerges as a potential second-generation BCL2 inhibitor for the treatment of hematologic malignancies with the potential to overcome BCL2 mutation-induced venetoclax resistance. Sonrotoclax is currently under investigation in multiple clinical trials.
Subject(s)
Antineoplastic Agents , Bridged Bicyclo Compounds, Heterocyclic , Drug Resistance, Neoplasm , Hematologic Neoplasms , Proto-Oncogene Proteins c-bcl-2 , Sulfonamides , Proto-Oncogene Proteins c-bcl-2/genetics , Proto-Oncogene Proteins c-bcl-2/antagonists & inhibitors , Proto-Oncogene Proteins c-bcl-2/metabolism , Sulfonamides/pharmacology , Bridged Bicyclo Compounds, Heterocyclic/pharmacology , Bridged Bicyclo Compounds, Heterocyclic/therapeutic use , Humans , Drug Resistance, Neoplasm/drug effects , Drug Resistance, Neoplasm/genetics , Animals , Hematologic Neoplasms/drug therapy , Hematologic Neoplasms/genetics , Hematologic Neoplasms/pathology , Mice , Antineoplastic Agents/pharmacology , Antineoplastic Agents/therapeutic use , Xenograft Model Antitumor Assays , Cell Line, Tumor , Mutation , Apoptosis/drug effectsABSTRACT
An atomically dispersed Fe-N-C catalyst has been synthesized and enables high power-out performance in microbial fuel cells (MFCs). The influence of Fe doping on the electronic properties of N-doped carbon was investigated, proving that single-atomic Fe sites embedded into N-doped carbon play a significant role in enhancing oxygen reduction reaction (ORR) performance in challenging neutral electrolyte. Density functional theory (DFT) studies indicate that a lower energy barrier for the limiting-potential step (*OH desorption) on Fe-N4 sites is favorable for the ORR process. This work offers new insights into the nature of Fe-N4 sites for the construction of highly active electrocatalysts for use in diverse energy conversion applications.
ABSTRACT
Plasmids have increasingly become a point of concern since they act as a vital medium for the dissemination of antibiotic resistance genes (ARGs). Although indigenous soil bacteria are critical hosts for these plasmids, the mechanisms driving the transfer of antibiotic resistance plasmids (ARPs) have not been well researched. In this study, we tracked and visualized the colonization of the wild fecal antibiotic resistance plasmid pKANJ7 in indigenous bacteria of different habitat soils (unfertilized soil (UFS), chemical fertilized soil (CFS), and manure fertilized soil (MFS)). The results showed that plasmid pKANJ7 mainly transferred to the dominant genera in the soil and genera that were highly related to the donor. More importantly, plasmid pKANJ7 also transferred to intermediate hosts which aid in the survival and persistence of these plasmids in soil. Nitrogen levels also raised the plasmid transfer rate (14th day: UFS: 0.09%, CFS: 1.21%, MFS: 4.57%). Lastly, our structural equation model (SEM) showed that dominant bacteria shifts caused by nitrogen and loam were the major driver shaping the difference in the transfer of plasmid pKANJ7. Overall, our findings enhance the mechanistic understanding of indigenous soil bacteria's role in plasmid transfer and inform potential methods to prevent the transmission of plasmid-borne resistance in the environment.
Subject(s)
Drug Resistance, Microbial , Soil Microbiology , Soil , Anti-Bacterial Agents/pharmacology , Bacteria/genetics , Drug Resistance, Microbial/genetics , Ecosystem , Genes, Bacterial , Manure/microbiology , Plasmids/genetics , Soil/chemistryABSTRACT
The implementation of high-safety Li metal batteries (LMBs) needs more stable and safer electrolytes. The solid-state electrolytes (SSEs) with their advantageous properties stand out for this purpose. However, low Li/electrolyte interfacial instability and uncontrolled Li dendrites growth trigger unceasing breakage of the solid electrolyte interphase (SEI), leading to fast capacity degradation. In response to these shortcomings, a new type of polymer electrolyte with self-healing capacity is introduced by grafting ionic liquid chain units into the backbones of polymers, which inherits the chemical inertness against the Li anode, allowing high Li+ transport, wide electrochemical window, and self-healing traits. Benefiting from the strong external H-bonding interactions, the obtained polymer electrolyte can spontaneously reconstruct dendrite-induced defects and fatigue crack growth at the Li/electrolyte interface, and, in turn, help tailor Li deposition. Owing to the resilient Li/electrolyte interface and dendrite-free Li plating, the equipped Li|LFP batteries display a high initial specific capacity of 134.7 mA h g-1, rendering a capacity retention of 91.2% after 206 cycles at room temperature. The new polymer electrolyte will undoubtedly bring inspiration for developing practical LMBs with highly improved safety and interfacial stability.
ABSTRACT
Improving volatile fatty acid (VFA) production, rather than producing methane from the anaerobic digestion (AD) of waste, has become a new strategy of resource utilization. In regard to animal wastewater, the effectiveness of persulfate/biochar (potassium peroxodisulfate, PDS/BC) on the hydrolysis and acidogenesis stages and the reaction mechanisms are still unclear. In this study, the AD process on cow wastewater was controlled at the hydrolysis and acidification stages by setting the hydraulic retention time (HRT) at 25 days. The results showed that the contents of total solids (TS) and volatile solids (VS) were further reduced by PDS/BC treatment with 0.15 gPDS/gTS of PDS added. The VFAs production increased by 12.4 % from day 0 to 25 compared to the blank set. Based on our molecular analysis, the rate of increase for the dissolved organic matter with low molecular weight (0-10 kDa) was 699.5 mg/(L·d) in the first 10 days. The change rate increased nearly 2.1 times, leading to higher VFAs yield. Moreover, the activities of fermentative bacteria were enhanced and Anaerocella was determined to be the specific and critical genus. However, excessive PDS (0.3 gPDS/gTS) prolonged the acidification period and caused the inactivation of fermentative bacteria. Structural equation modeling demonstrated that PDS can directly affect VFAs yield and also had an indirect effect by influencing the decomposition of particulate matter and microbial activities. Therefore, the enhancement of VFAs production using the PDS/BC method could be due to synergistic chemical and microbial effects. Findings from this study can provide a practical strategy to enhance the VFAs production of AD technology for livestock wastewater and help reveal the reaction mechanism of PDS/BC treatment.
Subject(s)
Bioreactors , Wastewater , Cattle , Animals , Female , Anaerobiosis , Bioreactors/microbiology , Fatty Acids, Volatile , Methane , Sewage/chemistry , BacteriaABSTRACT
Using porous copper (Cu) as the host is one of the most effective approaches to stabilize Li metal anodes. However, the most widely used porous Cu hosts usually account for the excessive mass proportion of composite anodes, which seriously decreases the energy density of Li metal batteries. Herein, an ultralight porous Cu nanowire aerogel (UP-Cu) is reported as the Li metal anode host to accommodate a high mass loading of Li content of 77 wt %. Specifically, the Li/UP-Cu electrode displays a satisfactory gravimetric capacity of 2715 mAh g-1, which is higher than that of the most reported Li metal composite anodes. The UP-Cu host achieves a high Coulombic efficiency of â¼98.9% after 250 cycles in the half cell and exceptional electrochemical stability under high-current-density and deep-plating-stripping conditions in the symmetrical cell. The Li/UP-Cu|LiFePO4 battery displays a specific capacity of 102 mAh g-1 at 5 C for 5000 cycles. The Li/UP-Cu|LiFePO4 pouch cell achieves a significantly high capacity of 146.3 mAh g-1 with a high capacity retention of 95.83% for 360 cycles. This work provides a lightweight porous host to stabilize Li-metal anodes and maintain their high mass-specific capacity.
ABSTRACT
Alkali metals (i.e., Li, Na, and K) are promising anode materials for next-generation high-energy-density batteries due to their superior theoretical specific capacities and low electrochemical potentials. However, the uneven current and ion distribution on the anode surface probably induces undesirable dendrite growth, which leads to significant safety hazards and severely hinders the commercialization of alkali metal anodes. A smart and versatile strategy that can accommodate alkali metals into porous metal current collectors (PMCCs) has been well established to resolve the issues as well as to promote the practical applications of alkali metal anodes. Moreover, the proposal of PMCCs can meet the requirement of the dendrite-free battery fabrication industry, while the electrode material loading exactly needs the metal current collector component as well. Here, a systematic survey on advanced PMCCs for Li, Na, and K alkali metal anodes is presented, including their development timeline, categories, fabrication methods, and working mechanism. On this basis, some significant methodology advances to control pore structure, surface area, surface wettability, and mechanical properties are systematically summarized. Further, the existing issues and the development prospects of PMCCs to improve anode performance in alkali metal batteries are discussed.
ABSTRACT
In order to protect the prairie ecological environment, intensive farming has become a prevalent method of sheep stocking. However, the link between captivity stocking mode and ecological risk of sheep feces is still poorly understood. In this study, metagenomics was used to identify the environmental risk of sheep feces among three stocking modes. Our results showed that captivity mode (C) elevated antibiotic resistance in feces, with the abundance of antibiotic resistance genes (ARGs) (5.381 copies/cell) higher than that of half-pen stocking (Fh) (1.093 copies/cell) and grazing mode (Fr) (0.315 copies/cell) (Duncan's test, P < 0.05). Virulence factor genes (VFGs) analysis showed offensive virulence factors had the highest abundance in captivity feces (C: 3.826 copies/cell, Fh: 0.342 copies/cell, Fr: 0.163 copies/cell) (Duncan's test, P < 0.05). 15 metagenome-assembled genomes (MAGs) were identified as potential pathogenic antibiotic resistant bacteria (PARB) and revealed that Escherichia, Klebsiella may be the main host of ARGs and VFGs in sheep feces. Furthermore, the minimal inhibition concentrations (MIC) of tetracycline of E. coli in the captivity feces was 8.6 times and 4.7 times than that of grazing and half-pen stocking samples, respectively. The Non-metric multidimensional scaling (NMDS) revealed that high stocking density leads to feces causing increased harm to the environment. Although feces from sheep raised in captivity and half-pen stocking modes are easier to collect, they are more harmful to the environment and aerobic composting should be done before their application to farmland. This work provides a guideline for better control of the environmental risk of sheep feces from different stocking modes.
Subject(s)
Anti-Bacterial Agents , Virulence Factors , Sheep/genetics , Animals , Anti-Bacterial Agents/pharmacology , Genes, Bacterial , Escherichia coli , Drug Resistance, Microbial/genetics , Genome, Bacterial , Feces/microbiology , Risk Assessment , TetracyclinesABSTRACT
Metal nanoclusters (MeNCs), composed of a few to hundreds of metal atoms and appropriate surface ligands, have attracted extensive interest in the electrochemiluminescence (ECL) realm owing to their molecule-like optical, electronic, and physicochemical attributes and are strongly anticipated for discrete energy levels, fascinating electrocatalytic activity, and good biocompatibility. Over the past decade, huge efforts have been devoted to the synthesis, properties, and application research of ECL-related MeNCs, and this field is still a subject of heightened concern. Therefore, this perspective aims to provide a comprehensive overview of the recent advances of MeNCs in the ECL domain, mainly covering the emerged ECL available MeNCs, unique chemical and optical properties, and the general ECL mechanisms. Synthesis strategies for desirable ECL performance are further highlighted, and the resulting ECL sensing applications utilizing MeNCs as luminophores, quenchers, and substrates are discussed systematically. Finally, we anticipate the future prospects and challenges in the development of this area.
Subject(s)
Biosensing Techniques , Metal Nanoparticles , Biosensing Techniques/methods , Luminescent Measurements/methods , Metal Nanoparticles/chemistryABSTRACT
Lithium-metal anodes suffer from inadequate rate and cycling performances for practical application mainly due to the harmful dendrite growth, especially at high currents. Herein a facile construction of the porous and robust network with thermally conductive AlN nanowires onto the commercial polypropylene separator by convenient vacuum filtration is reported. The so-constructed AlN-network shield provides a uniform thermal distribution to realize homogeneous Li deposition, super electrolyte-philic channels to enhance Li-ion transport, and also a physical barrier to resist dendrite piercing as the last fence. Consequently, the symmetric Li|Li cell presents an ultralong lifetime over 8000 h (20 mA cm-2 , 3 mAh cm-2 ) and over 1000 h even at an unprecedented high rate (80 mA cm-2 , 80 mAh cm-2 ), which is far surpassing the corresponding performances reported to date. The corresponding Li|LiFePO4 cell delivers a high specific capacity of 84.3 mAh g-1 at 10 C. This study demonstrates an efficient approach with great application potential toward durable and high-power Li-metal batteries and even beyond.
ABSTRACT
Three dimensional (3D) metal structures such as nickel (Ni) and copper (Cu) frames have long been regarded as a good host for lithium (Li) metal. However, Li deposition on different metals often causes obvious over-potential, affecting the electrode performance in lithium metal batteries. Here, a Ni-N-O interface was created by surface nitridation to the Ni micro-particles, which were made into 3D current collectors. The directly grown Ni3N created a thin and lithiophilic layer containing dense Li nucleation sites. The homogeneous distribution of amorphous Ni3N and NiO at the interface allowed for a fast transfer of both electrons and ions, and thus facilitated smooth and even plating/stripping of lithium. High cycling stability and rate capability were simultaneously achieved. The 3D Li@N-Ni anode exhibited an extremely low voltage hysteresis of â¼10 mV over 850 h in a symmetric cell. The full battery paired with LiFePO4 achieved steady cycling at 5C for 1500 cycles, with coulombic efficiency constantly higher than 99.2% and an average capacity loss of 0.027 mA h g-1 per cycle, demonstrating a rational strategy for the design and fabrication of efficient lithium anodes for practical applications.
ABSTRACT
Complete mitochondrial genomes (mitogenomes) can provide useful information for phylogenetic relationships, gene rearrangement, and evolutionary traits. In this study, we determined the complete mitochondrial DNA sequence of the herbivorous crab Grapsus albolineatus. It is a typical metazoan mitochondrial genome. The total size is 15,583 bp, contains the entire set of 37 genes, and has an AT-rich region. Then, 23 of the 37 genes were encoded by the heavy (+) strand while 14 are encoded by the light (-) strand. Compared with the pan-crustacean ground pattern, two tRNA genes (tRNA-His and tRNA-Gln) were rearranged and the tandem duplication/random loss model was used to explain the observed gene rearrangements. The phylogenetic results showed that all Grapsidae crabs clustered together as a group. Furthermore, the monophyly of each family was well supported, with the exception of Menippidae. In general, the results obtained in this study will contribute to the better understanding of gene rearrangements in Grapsidae crab mitogenomes and provide new insights into the phylogeny of Brachyura.
Subject(s)
Brachyura/genetics , Genome, Mitochondrial , Phylogeny , Animals , Codon Usage , Gene Rearrangement , RNA, Ribosomal/genetics , RNA, Transfer/geneticsABSTRACT
The double-sided electrodes with active materials are widely used for commercial lithium (Li) ion batteries with a higher energy density. Accordingly, developing an anode current collector that can accommodate the stable and homogeneous Li plating/stripping on both sides will be highly desired for practical Li metal batteries (LMBs). Herein, an integrated bidirectional porous Cu (IBP-Cu) film with a through-pore structure is fabricated as Li metal hosts using the powder sintering method. The resultant IBP-Cu current collector with tunable pore volume and size exhibits high mechanical flexibility and stability. The bidirectional and through-pore structure enables the IBP-Cu host to achieve homogeneous Li deposition and effectively suppresses the dendritic Li growth. Impressively, the as-fabricated Li/IBP-Cu anode exhibits a remarkable capacity of up to 7.0 mAh cm-2 for deep plating/stripping, outstanding rate performance, and ultralong cycling ability with high Coulombic efficiency of ≈100% for 1000 cycles. More practicably, a designed pouch cell coupled with one Li/IBP-Cu anode and two LiFePO4 cathodes exhibits a highly elevated energy density (≈187.5%) compared with a pouch cell with one anode and one cathode. Such design of a bidirectional porous Cu current collector with stable Li plating/stripping behaviors suggests its promising practical applications for next-generation Li metal batteries.
ABSTRACT
Coronavirus disease 2019 (COVID-19) as a severe acute respiratory syndrome infection has spread rapidly across the world since its emergence in 2019 and drastically altered our way of life. Patients who have recovered from COVID-19 may still face persisting respiratory damage from the virus, necessitating long-term supervision after discharge to closely assess pulmonary function during rehabilitation. Therefore, developing portable spirometers for pulmonary function tests is of great significance for convenient home-based monitoring during recovery. Here, we propose a wireless, portable pulmonary function monitor for rehabilitation care after COVID-19. It is composed of a breath-to-electrical (BTE) sensor, a signal processing circuit, and a Bluetooth communication unit. The BTE sensor, with a compact size and light weight of 2.5 cm3 and 1.8 g respectively, is capable of converting respiratory biomechanical motions into considerable electrical signals. The output signal stability is greater than 93% under 35%-81% humidity, which allows for ideal expiration airflow sensing. Through a wireless communication circuit system, the signals can be received by a mobile terminal and processed into important physiological parameters, such as forced expiratory volume in 1 s (FEV1) and forced vital capacity (FVC). The FEV1/FVC ratio is then calculated to further evaluate pulmonary function of testers. Through these measurement methods, the acquired pulmonary function parameters are shown to exhibit high accuracy (>97%) in comparison to a commercial spirometer. The practical design of the self-powered flow spirometer presents a low-cost and convenient method for pulmonary function monitoring during rehabilitation from COVID-19.