ABSTRACT
The problem that the thermal safety of flexible electronic devices is difficult to evaluate in real time is addressed in this study by establishing a BP neural network (GA-BPNN) temperature prediction model based on genetic algorithm optimisation. The model uses a BP neural network to fit the functional relationship between the input condition and the steady-state temperature of the equipment and uses a genetic algorithm to optimise the parameter initialisation problem of the BP neural network. To overcome the challenge of the high cost of obtaining experimental data, finite element analysis software is used to simulate the temperature results of the equipment under different working conditions. The prediction variance of the GA-BPNN model does not exceed 0.57 °C and has good robustness, as the model is trained according to the simulation data. The study conducted thermal validation experiments on the temperature prediction model for this flexible electronic device. The device reached steady state after 1200 s of operation at rated power. The error between the predicted and experimental results was less than 0.9 °C, verifying the validity of the model's predictions. Compared with traditional thermal simulation and experimental methods, this model can quickly predict the temperature with a certain accuracy and has outstanding advantages in computational efficiency and integrated application of hardware and software.
ABSTRACT
Low-flow removal of refractory ascites is critical to treating cirrhosis and digestive system tumor, and thus, commercial ascites pump emerged lately. The rigid structure of clinically available pumps rises complication rate and lack of flow rate monitoring hinders early warning of abnormalities. Herein, a soft artificial system was proposed inspired by lymph for interactive ascites transfer with great biocompatibility. The implantable system is composed of pump cavity, valves and tubes, which are soft and flexible made by silica gel. Therefore, the system possesses similar modulus to tissues and can naturally fit surrounding tissues. The cavity with magnetic tablet embedded is driven by extracorporeal magnetic field. Subsequently, the system can drain ascites with a top speed of 23 mL min-1, much higher than that of natural lymphatic system and state-of-art devices. Moreover, integrated flexible sensors enable wireless, real-time flow rate monitoring, serving as proof of treatment adjustment, detection and locating of malfunction at early stage. The liver function of experimental objects was improved, and no severe complications occurred for 4 weeks, which proved its safety and benefit to treatment. This artificial lymphatic system can serve as a bridge to recovery and pave the way for further clinical research.
ABSTRACT
Brain-computer interfaces (BCIs) have attracted considerable attention in motor and language rehabilitation. Most devices use cap-based non-invasive, headband-based commercial products or microneedle-based invasive approaches, which are constrained for inconvenience, limited applications, inflammation risks and even irreversible damage to soft tissues. Here, we propose in-ear visual and auditory BCIs based on in-ear bioelectronics, named as SpiralE, which can adaptively expand and spiral along the auditory meatus under electrothermal actuation to ensure conformal contact. Participants achieve offline accuracies of 95% in 9-target steady state visual evoked potential (SSVEP) BCI classification and type target phrases successfully in a calibration-free 40-target online SSVEP speller experiment. Interestingly, in-ear SSVEPs exhibit significant 2nd harmonic tendencies, indicating that in-ear sensing may be complementary for studying harmonic spatial distributions in SSVEP studies. Moreover, natural speech auditory classification accuracy can reach 84% in cocktail party experiments. The SpiralE provides innovative concepts for designing 3D flexible bioelectronics and assists the development of biomedical engineering and neural monitoring.
Subject(s)
Brain-Computer Interfaces , Humans , Evoked Potentials, Visual , Electroencephalography , Calibration , Language , Photic Stimulation , AlgorithmsABSTRACT
Three-dimensional (3D) curvy electronics has wide-ranging application in biomedical health care, soft machine, and high-density curved imager. Limited by material properties, complex procedures, and coverage ability of existing fabrication techniques, the development of high-performance 3D curvy electronics remains challenging. Here, we propose an automated wrap-like transfer printing prototype for fabricating 3D curvy electronics. Assisted by a gentle and uniform pressure field, the prefabricated planar circuits on the petal-like stamp are integrated onto the target surface intactly with full coverage. The driving pressure for the wrapping is provided by the strain recovery of a prestrained elastic film triggered by the air pressure control. The wrapping configuration and strain distribution of the stamp are simulated by finite element analysis, and the pattern and thickness of the stamps are optimized. Demonstration of this strategy including spherical meander antenna, spherical light-emitting diode array, and spherical solar cell array illustrates its feasibility in the development of complex 3D curvy electronics.
ABSTRACT
Bowel sounds (BSs) have important clinical value in the auxiliary diagnosis of digestive diseases, but due to the inconvenience of long-term monitoring and too much interference from environmental noise, they have not been well studied. Most of the current electronic stethoscopes are hard and bulky without the function of noise reduction, and their application for long-term wearable monitoring of BS in noisy clinical environments is very limited. In this paper, a flexible dual-channel digital auscultation patch with active noise reduction is designed and developed, which is wireless, wearable, and conformably attached to abdominal skin to record BS more accurately. The ambient noise can be greatly reduced through active noise reduction based on the adaptive filter. At the same time, some nonstationary noises appearing intermittently (e.g., frictional noise) can also be removed from BS by the cross validation of multichannel simultaneous acquisition. Then, two kinds of typical BS signals are taken as examples, and the feature parameters of the BS in the time domain and frequency domain are extracted through the time-frequency analysis algorithm. Furthermore, based on the short-term energy ratio between the four channels of dual patches, the two-dimensional localization of BS on the abdomen mapping plane is realized. Finally, the continuous wearable monitoring of BS for patients with postoperative ileus (POI) in the noisy ward from pre-operation (POD0) to postoperative Day 7 (POD7) was carried out. The obtained change curve of the occurrence frequency of BS provides guidance for doctors to choose a reasonable feeding time for patients after surgery and accelerate their recovery. Therefore, flexible dual-channel digital auscultation patches with active noise reduction will have promising applications in the clinical auxiliary diagnosis of digestive diseases.
Subject(s)
Auscultation , Noise , Algorithms , HumansABSTRACT
Packers based on shape memory polymers (SMPs) are an emerging technology that have the advantages of compact structure, easy manufacture, and adaptability to complex wells. This paper proposes a finite element model to simulate the setting process and mechanical response of an SMP packer. The investigated material is an epoxy-based thermal responsive SMP, whose relaxation modulus and thermal expansion coefficient were measured at different temperatures. Based on the experimental data, the model describes the viscoelastic behavior of the SMP using the generalized Maxwell model. The results show that the SMP packer could provide sufficient contact stress under downhole conditions, even after the stress was relaxed. A further parametric study revealed that the most significant factor in sealing effects is the wellbore pressure, followed by the interference between the packer and the annular, the seal length, the pre-compression, and the setting temperature. High downhole pressures require more significant contact stress and increase the risk of slip between the packer and casing wall by promoting shear stress. Increasing the seal length and interference enhances the contact stress and mitigates the shear stress to improve the seal performance. Pre-compression and setting temperatures are minor factors that have little influence on sealability.
ABSTRACT
Advances in materials and mechanics designs have led to the development of flexible electronics, which have important applications to human healthcare due to their good biocompatibility and conformal integration with biological tissue. Material innovation and mechanics design have played a key role in designing the substrates and encapsulations of flexible electronics for various bio-integrated systems. This review first introduces the inorganic materials and novel organic materials used for the substrates and encapsulation of flexible electronics, and summarizes their mechanics properties, permeability and optical transmission properties. The structural designs of the substrates are then introduced to ensure the reliability of flexible electronics, including the patterned and pre-strained designs to improve the stretchability, and the strain-isolation and -limiting substrates to reduce the deformation. Some emerging encapsulations are presented to protect the flexible electronics from degradation, environmental erosion or contamination, though they may slightly reduce the stretchability of flexible electronics.
Subject(s)
Wearable Electronic Devices , Electronics , Humans , Reproducibility of ResultsABSTRACT
Thrombosis and restenosis after vascular reconstruction procedures may cause complications such as stroke, but a clinical means to continuously monitor vascular conditions is lacking. Conventional ultrasound probes are rigid, particularly for postoperative patients with fragile skin. Techniques based on photoplethysmography or thermal analysis provide only relative changes in flow volume and have a shallow detection depth. Here, we introduce a flexible Doppler ultrasound device for the continuous monitoring of the absolute velocity of blood flow in deeply embedded arteries based on the Doppler effect. The device is thin (1 mm), lightweight (0.75 g), and skin conforming. When the dual-beam Doppler method is used, the influence of the Doppler angle on the velocity measurement is avoided. Experimental studies on ultrasound phantoms and human subjects demonstrate accurate measurement of the flow velocity. The wearable Doppler device has the potential to enhance the quality of care of patients after reconstruction surgery.
ABSTRACT
The use of implantable medical devices, including cardiac pacemakers and brain pacemakers, is becoming increasingly prevalent. However, surgically replacing batteries owing to their limited lifetime is a drawback of those devices. Such an operation poses a risk to patientsa problem that, to date, has not yet been solved. Furthermore, current devices are large and rigid, potentially causing patient discomfort after implantation. To address this problem, we developed a thin, battery-free, flexible, implantable system based on flexible electronic technology that can not only achieve wireless recharging and communication simultaneously via ultrasound but also perform many current device functions, including in vivo physiological monitoring and cardiac pacing. To prove this, an animal experiment was conducted involving creating a cardiac arrest model and powering the system by ultrasound. The results showed that it automatically detected abnormal heartbeats and responded by electrically stimulating the heart, demonstrating the device's potential clinical utility for emergent treatment.
ABSTRACT
Ultrasound treatment is an effective method for accelerating chronic wound healing. However, it is not widely used because traditional ultrasonic probes cannot be conformal to the wound surface, which leads to limitations of use and unstable treatment effects. In addition, the use of liquid coupling agent increases the chance of wound infection. A strategy is proposed to design and fabricate a flexible ultrasonic patch for treating chronic wounds effectively. The piezoelectric ceramic in the patch is discretized into several linearly arranged units, which are integrated on a flexible circuit substrate. A thin hydrogel patch is used as both encapsulation and coupling layer to avoid wound infection and ensure the penetration of ultrasound. The ultrasonic patch is soft, light, and can completely conform to the treatment area. Bending of the patch focuses the sound beams on the center of the bending circle, which achieves control of the target treatment area. Ultrasound treatment experiments are carried out on some type-II diabetic rats. Immunohistochemical (IHC) results indicate that ultrasound accelerates wound healing by activating Rac1 in both dermal and epidermal layers. Treatment results show that wound treated with the ultrasound heals faster than wounds without. The healing time is shortened by ≈40%.
Subject(s)
Diabetes Mellitus, Experimental , Animals , Hydrogels , Rats , Ultrasonics , Wound HealingABSTRACT
Hypoxia refers to insufficient oxygen amounts at the tissue level unable to maintain adequate homeostasis. Severe hypoxia may occur in the absence of subjective breathlessness due to respiratory failure. Precise monitoring of low blood oxygen saturation is crucially desired, catering to the clinical requirements. However, current pulse oximeters cannot function well in monitoring peripheral oxygen saturation limited by the weak peripheral blood circulation at a low oxygen level. In this work, we propose a flexible hybrid electronic (FHE) with a compact structure and high sensitivity for conveniently monitoring hypoxia. This FHE is composed of 10-µm thickness semiconductors with different materials, functionalities, and sizes. Its performance is demonstrated by monitoring arterial blood oxygen saturation (SaO2) at the body's different arteries. The absolute error is less than 2% within a SaO2 ranging from 99% to 63%. The efficient techniques presented in this work may bring light to the next-generation flexible hybrid electronics and provide potential widespread use in research and clinical applications, especially for emergency treatment.
Subject(s)
Hypoxia , Oximetry , Electronics , Humans , OxygenABSTRACT
Nowadays, controllable drug release is a vitally important strategy for cancer treatment and usually realized using implanting biocompatible devices. However, these devices need to be removed by another surgery after the function fails, which brings the risks of inflammation or potential death. In this article, a biodegradable flexible electronic device with controllable drug (paclitaxel) release was proposed for cancer treatment. The device is powered by an external alternating magnetic field to generate internal resistance heat and promote drug release loaded on the substrate. Moreover, the device temperature can even reach to 65 °C, which was sufficient for controllable drug release. This device also has similar mechanical properties to human tissues and can autonomously degrade due to the structure design of the circuit and degradable compositions. Finally, it is confirmed that the device has a good inhibitory effect on the proliferation of breast cancer cells (MCF-7) and could be completely degraded in vitro. Thus, its great biodegradability and conformity can relieve patients of second operation, and the device proposed in this paper provides a promising solution to complete conquest of cancer in situ.
Subject(s)
Antineoplastic Agents, Phytogenic/administration & dosage , Biocompatible Materials , Delayed-Action Preparations , Electronics , Neoplasms/drug therapy , Paclitaxel/administration & dosage , Antineoplastic Agents, Phytogenic/therapeutic use , Humans , MCF-7 Cells , Paclitaxel/therapeutic useABSTRACT
According to the statistics of the World Health Organization, an estimated 17.9 million people die from cardiovascular diseases each year, representing 31% of all global deaths. Continuous non-invasive arterial pressure (CNAP) is essential for the management of cardiovascular diseases. However, it is difficult to achieve long-term CNAP monitoring with the daily use of current devices due to irritation of the skin as well as the lack of motion artifacts suppression. Here, we report a high-performance skin-like optoelectronic system integrated with ultra-thin flexible circuits to monitor CNAP. We introduce a theoretical model via the virtual work principle for predicting the precise blood pressure and suppressing motion artifacts, and propose optical difference in the frequency domain for stable optical measurements in terms of skin-like devices. We compare the results with the blood pressure acquired by invasive (intra-arterial) blood pressure monitoring for >1500 min in total on 44 subjects in an intensive care unit. The maximum absolute errors of diastolic and systolic blood pressure were ±7/±10 mm Hg, respectively, in immobilized, and ±10/±14 mm Hg, respectively, in walking scenarios. These strategies provide advanced blood pressure monitoring techniques, which would directly address an unmet clinical need or daily use for a highly vulnerable population.
ABSTRACT
Measurements based on optics offer a wide range of unprecedented opportunities in the biological application due to the noninvasive or non-destructive detection. Wearable skin-like optoelectronic devices, capable of deforming with the human skin, play significant roles in future biomedical engineering such as clinical diagnostics or daily healthcare. However, the detected signals based on light intensity are very sensitive to the light path. The performance degradation of the wearable devices occurs due to device deformation or motion artifact. In this work, we propose the optical difference in the frequency domain of signals for suppressing the disturbance generated by wearable device deformation or motion artifact during the photoplethysmogram (PPG) monitoring. The signal processing is simulated with different input waveforms for analyzing the performance of this method. Then we design and fabricate a wearable optoelectronic device to monitor the PPG signal in the condition of motion artifact and use the optical difference in the frequency domain of signals to suppress irregular disturbance. The proposed method reduced the average error in heart rate estimation from 13.04 beats per minute (bpm) to 3.41 bpm in motion and deformation situations. These consequences open up a new prospect for improving the performance of the wearable optoelectronic devices and precise medical monitoring in the future.
ABSTRACT
Recent advances in material innovation and structural design provide routes to flexible hybrid electronics that can combine the high-performance electrical properties of conventional wafer-based electronics with the ability to be stretched, bent, and twisted to arbitrary shapes, revolutionizing the transformation of traditional healthcare to digital healthcare. Here, material innovation and structural design for the preparation of flexible hybrid electronics are reviewed, a brief chronology of these advances is given, and biomedical applications in bioelectrical monitoring and stimulation, optical monitoring and treatment, acoustic imitation and monitoring, bionic touch, and body-fluid testing are described. In conclusion, some remarks on the challenges for future research of flexible hybrid electronics are presented.
Subject(s)
Delivery of Health Care , Electronics , Monitoring, Physiologic/methods , Blood Glucose/analysis , Body Fluids/chemistry , Body Fluids/metabolism , Central Nervous System/physiology , Electric Stimulation , Humans , Nanostructures/chemistry , Wearable Electronic DevicesABSTRACT
Flexible pressure sensors have attracted considerable attention because of their potential applications in healthcare monitoring and human-machine interactions. However, the complicated fabrication process and the cos of sensing materials limit their widespread applications in practice. Herein, a flexible pressure sensor with outstanding performances is presented through an extremely simple and cost-efficient fabrication process. The sensing materials of the sensor are based on low-cost carbon black (CB)@airlaid paper (AP) composites, which are just prepared by drop-casting CB solutions onto APs. Through simply stacking multiple CB@APs with an irregular surface and a fiber-network structure, the obtained pressure sensor demonstrates an ultrahigh sensitivity of 51.23 kPa-1 and an ultralow detection limit of 1 Pa. Additionally, the sensor exhibits fast response time, wide working range, good stability, as well as excellent flexibility and biocompatibility. All the comprehensive and superior performances endow the sensor with abilities to precisely detect weak air flow, wrist pulse, phonation, and wrist bending in real time. In addition, an array electronic skin integrated with multiple CB@AP sensors has been designed to identify spatial pressure distribution and pressure magnitude. Through a biomimetic structure inspired by blooming flowers, a sensor with the open-petal structure has been designed to recognize the wind direction. Therefore, our study, which demonstrates a flexible pressure sensor with low cost, simple preparation, and superior performances, will open up for the exploration of cost-efficient pressure sensors in wearable devices.
Subject(s)
Costs and Cost Analysis , Paper , Pressure , Soot/analysis , Wearable Electronic Devices/economics , PliabilityABSTRACT
Peripheral neuromodulation has been widely used throughout clinical practices and basic neuroscience research. However, the mechanical and geometrical mismatches at current electrode-nerve interfaces and complicated surgical implantation often induce irreversible neural damage, such as axonal degradation. Here, compatible with traditional 2D planar processing, we propose a 3D twining electrode by integrating stretchable mesh serpentine wires onto a flexible shape memory substrate, which has permanent shape reconfigurability (from 2D to 3D), distinct elastic modulus controllability (from ~100 MPa to ~300 kPa), and shape memory recoverability at body temperature. Similar to the climbing process of twining plants, the temporarily flattened 2D stiff twining electrode can naturally self-climb onto nerves driven by 37°C normal saline and form 3D flexible neural interfaces with minimal constraint on the deforming nerves. In vivo animal experiments, including right vagus nerve stimulation for reducing the heart rate and action potential recording of the sciatic nerve, demonstrate the potential clinical utility.
Subject(s)
Action Potentials , Elastic Modulus , Electrodes , Peripheral Nerves/physiology , Polymers/chemistry , Animals , Electric Stimulation , RabbitsABSTRACT
In Fig. 4c of this Article, the scale bar units were incorrectly stated as 'µV'; the correct units are 'mV'. The figure has now been amended accordingly.
ABSTRACT
Skin-interfaced medical devices are critically important for diagnosing disease, monitoring physiological health and establishing control interfaces with prosthetics, computer systems and wearable robotic devices. Skin-like epidermal electronic technologies can support these use cases in soft and ultrathin materials that conformally interface with the skin in a manner that is mechanically and thermally imperceptible. Nevertheless, schemes so far have limited the overall sizes of these devices to less than a few square centimetres. Here, we present materials, device structures, handling and mounting methods, and manufacturing approaches that enable epidermal electronic interfaces that are orders of magnitude larger than previously realized. As a proof-of-concept, we demonstrate devices for electrophysiological recordings that enable coverage of the full scalp and the full circumference of the forearm. Filamentary conductive architectures in open-network designs minimize radio frequency-induced eddy currents, forming the basis for structural and functional compatibility with magnetic resonance imaging. We demonstrate the use of the large-area interfaces for the multifunctional control of a transhumeral prosthesis by patients who have undergone targeted muscle-reinnervation surgery, in long-term electroencephalography, and in simultaneous electroencephalography and structural and functional magnetic resonance imaging.
Subject(s)
Cognition , Epidermis/physiology , Magnetic Resonance Imaging , Prostheses and Implants , Wearable Electronic Devices , Adult , Electrocardiography , Electrodes , Electroencephalography , Electromyography , Humans , Male , RoboticsABSTRACT
In Fig. 4c of this Article originally published, the bottom y axis was incorrectly labelled as 'MRI-ECG (µV)'; the correct label is 'MRI/ECG'. In addition, in Fig. 4d, the bottom y axis was incorrectly labelled as 'ECG (µV)'; the correct label is 'ECG (mV)'. The scale bar units were also incorrectly stated as 'mV', the correct units are 'µV'. The figure has now been amended accordingly.