The bitter side of teas: Pesticide residues and their impact on human health.

Tea (Camellia sinensis) is one of the most widely consumed non-alcoholic beverages globally, known for its rich composition of bioactive compounds that offer various health benefits to humans. However, the cultivation of tea plants often faces challenges due to their high vulnerability to pests and diseases, resulting in the heavy use of pesticides. Consequently, pesticide residues can be transferred to tea leaves, compromising their quality and safety and potentially posing risks to human health, including hormonal and reproductive disorders and cancer development. In light of these concerns, this review aims to: (I) present the maximum limits of pesticide residues established by different international regulatory agencies; (II) explore the characteristics of pesticides commonly employed in tea cultivation, encompassing aspects such as digestion, bioaccessibility, and the behavior of pesticide transfer; and (III) discuss the effectiveness of detection and removal methods for pesticides, the impacts of pesticides on both tea plants and human health and investigate emerging alternatives to replace these substances. By addressing these critical aspects, this review provides valuable insights into the management of pesticide residues in tea production, with the goal of ensuring the production of safe, high-quality tea while minimizing adverse effects on human health.

Biosorption of bioactive compounds in bacterial nanocellulose: Mechanisms and physical-chemical properties.

Bacterial cellulose (BC) is a biomaterial produced by Gluconacetobacter xylinus, with wide applicability in different areas, such as biomedical, pharmaceutical, and food. BC production is usually carried out in a medium containing phenolic compounds (PC), such as teas, however, the purification process leads to the loss of such bioactive. Thus, the innovation of this research consists of the reincorporation of PC after the purification of the BC matrices through the biosorption process. In this context, the effects of the biosorption process in BC were evaluated to maximize the incorporation of phenolic compounds from a ternary mixture of hibiscus (Hibiscus sabdariffa), white tea (Camellia sinensis), and grape pomace (Vitis labrusca). The biosorbed membrane (BC-Bio) showed a great concentration of total phenolic compounds (TPC = 64.89 mg L-1) and high antioxidant capacity through different assays (FRAP: 130.7 mg L-1, DPPH: 83.4 mg L-1, ABTS: 158.6 mg L-1, TBARS: 234.2 mg L-1). The physical tests also indicated that the biosorbed membrane presented high water absorption capacity, thermal stability, low permeability to water vapor and improved mechanical properties compared to BC-control. These results indicated that the biosorption of phenolic compounds in BC efficiently increases bioactive content and improves physical membrane characteristics. Also, PC release in a buffered solution suggests that BC-Bio can be used as a polyphenol delivery system. Therefore, BC-Bio is a polymer with wide application in different industrial segments.

Optimising the Production Process of Bacterial Nanocellulose: Impact on Growth and Bioactive Compounds.

Research background: Research into bacterial cellulose production has been growing rapidly in recent years, as it has a potential use in various applications, such as in the medical and food industries. Previous studies have focused on optimising the production process through various methods, such as using different carbon sources and manipulating environmental conditions. However, further research is still needed to optimise the production process and understand the underlying mechanisms of bacterial cellulose synthesis. Experimental approach: We used Plackett-Burman and Box-Behnken experimental designs to analyse the effect of different factors on bacterial cellulose production. The fermentation kinetics of the optimised medium was analysed, and the produced cellulose was characterised. This approach was used because it allows the identification of significant factors influencing bacterial cellulose growth, the optimisation of the culture medium and the characterisation of the produced cellulose. Results and conclusions: The results showed that higher sucrose concentrations, higher kombucha volume fractions and a smaller size of the symbiotic culture of bacteria and yeast were the most important factors for the improvement of bacterial cellulose production, while the other factors had no relevant influence. The optimised medium showed an increase in the concentrations of total phenolic compounds and total flavonoids as well as significant antioxidant activity. The produced pure bacterial cellulose had a high water absorption capacity as well as high crystallinity and thermal stability. Novelty and scientific contribution: The study makes an important scientific contribution by optimising the culture medium to produce bacterial cellulose more productively and efficiently. The optimised medium can be used for the production of a kombucha-like beverage with a high content of bioactive compounds and for the production of bacterial cellulose with high crystallinity and thermal stability. Additionally, the study highlights the potential of bacterial cellulose as a highly water-absorbent material with applications in areas such as packaging and biomedical engineering.

The Importance of Antioxidant Biomaterials in Human Health and Technological Innovation: A Review.

Biomaterials come from natural sources such as animals, plants, fungi, algae, and bacteria, composed mainly of protein, lipid, and carbohydrate molecules. The great diversity of biomaterials makes these compounds promising for developing new products for technological applications. In this sense, antioxidant biomaterials have been developed to exert biological and active functions in the human body and industrial formulations. Furthermore, antioxidant biomaterials come from natural sources, whose components can inhibit reactive oxygen species (ROS). Thus, these materials incorporated with antioxidants, mainly from plant sources, have important effects, such as anti-inflammatory, wound healing, antitumor, and anti-aging, in addition to increasing the shelf-life of products. Aiming at the importance of antioxidant biomaterials in different technological segments as biodegradable, economic, and promising sources, this review presents the main available biomaterials, antioxidant sources, and assigned biological activities. In addition, potential applications in the biomedical and industrial fields are described with a focus on innovative publications found in the literature in the last five years.

Functional properties of bioactive compounds from Spirulina spp.: Current status and future trends.

Functional foods show non-toxic bioactive compounds that offer health benefits beyond their nutritional value and beneficially modulate one or more target functions in the body. In recent decades, there has been an increase in the trend toward consuming foods rich in bioactive compounds, less industrialized, and with functional properties. Spirulina, a cyanobacterium considered blue microalgae, widely found in South America, stands out for its rich composition of bioactive compounds, as well as unsaturated fatty acids and essential amino acids, which contribute to basic human nutrition and can be used as a protein source for diets free from animal products. In addition, they have colored compounds, such as chlorophylls, carotenoids, phycocyanins, and phenolic compounds which can be used as corants and natural antioxidants. In this context, this review article presents the main biological activities of spirulina as an anticancer, neuroprotective, probiotic, anti-inflammatory, and immune system stimulating effect. Furthermore, an overview of the composition of spirulina, its potential for different applications in functional foods, and its emerging technologies are covered in this review.

Bioactive profile of edible nasturtium and rose flowers during simulated gastrointestinal digestion.

Rose and nasturtium are common ornamental edible flowers rich in phytochemicals whose application as food is not widely explored. The gastrointestinal environment can modify these compounds, resulting in new combinations with different bioactivity. This study aimed to evaluate the effects of simulated gastrointestinal digestion (SGD) on rose and nasturtium flower extracts. Using UPLC-HRMS, 38 phenolic compounds were identified, and the SGD caused significant changes, mainly in the glycosylated phenolic. Furthermore, antioxidant activity was correlated with the increase in the concentrations of some polyphenols. Tested Gram-negative bacteria showed sensitivity to the flower extracts; their growth was inhibited by up to 82.7%. SGD interrupted the bacterial growth inhibition power of the rose extracts. On the other hand, an increase in inhibition ranging from 52.25 to 54.72%was found for nasturtium extracts, correlated to the behavior of some bioactive. Hence, SGD resulted in significant changes in phenolic profiles of the edible flowers, increasing antioxidant activity and changing antimicrobial effects.

Biotechnological potential of fungi from a mangrove ecosystem: Enzymes, salt tolerance and decolorization of a real textile effluent.

The mangrove is an ecosystem bounded by the line of the largest tide in size that occurs in climatic and subtropical regions. In this environment, microorganisms and their enzymes are involved in a series of transformations and nutrient cycling. To evaluate the biotechnological potential of fungi from a mangrove ecosystem, samples from mangrove trees were collected at the Paranaguá Estuarine Complex in Brazil and 40 fungal isolates were obtained, cultivated, and screened for hydrolytic and ligninolytic enzymes production, adaptation to salinity and genetic diversity. The results showed a predominance of hydrolytic enzymes and fungal tolerance to ≤ 50 g L-1 sodium chloride (NaCl) concentration, a sign of adaptive halophilia. Through morphological and molecular analyses, the isolates were identified as: Trichoderma atroveride, Microsphaeropsis arundinis, Epicoccum sp., Trichoderma sp., Gliocladium sp., Geotrichum sp. and Cryphonectria sp. The ligninolytic enzymatic potential of the fungi was evaluated in liquid cultures in the presence and absence of seawater and the highest activity of laccase among isolates was observed in the presence of seawater with M. arundinis (LB07), which produced 1,037 U L-1. Enzymatic extracts of M. arundinis fixed at 100 U L-1 of laccase partially decolorized a real textile effluent in a reaction without pH adjustment and chemical mediators. Considering that mangrove fungi are still few explored, the results bring an important contribution to the knowledge about these microorganisms, as their ability to adapt to saline conditions, biodegradation of pollutants, and enzymatic potential, which make them promising candidates in biotechnological processes.

Laccases as green and versatile biocatalysts: from lab to enzyme market-an overview.

Laccases are multi-copper oxidase enzymes that catalyze the oxidation of different compounds (phenolics and non-phenolics). The scientific literature on laccases is quite extensive, including many basic and applied research about the structure, functions, mechanism of action and a variety of biotechnological applications of these versatile enzymes. Laccases can be used in various industries/sectors, from the environmental field to the cosmetics industry, including food processing and the textile industry (dyes biodegradation and synthesis). Known as eco-friendly or green enzymes, the application of laccases in biocatalytic processes represents a promising sustainable alternative to conventional methods. Due to the advantages granted by enzyme immobilization, publications on immobilized laccases increased substantially in recent years. Many patents related to the use of laccases are available, however, the real industrial or environmental use of laccases is still challenged by cost-benefit, especially concerning the feasibility of producing this enzyme on a large scale. Although this is a compelling point and the enzyme market is heated, articles on the production and application of laccases usually neglect the economic assessment of the processes. In this review, we present a description of laccases structure and mechanisms of action including the different sources (fungi, bacteria, and plants) for laccases production and tools for laccases evolution and prediction of potential substrates. In addition, we both compare approaches for scaling-up processes with an emphasis on cost reduction and productivity and critically review several immobilization methods for laccases. Following the critical view on production and immobilization, we provide a set of applications for free and immobilized laccases based on articles published within the last five years and patents which may guide future strategies for laccase use and commercialization.

Bacterial cellulose: From production optimization to new applications.

Bacterial cellulose (BC) is a biopolymer of great significance to the medical, pharmaceutical, and food industries. However, a high concentration of carbon sources (mainly glucose) and other culture media components is usually required to promote a significant yield of BC, which increases the bioprocess cost. Thus, optimization strategies (conventional or statistical) have become relevant for the cost-effective production of bacterial cellulose. Additionally, this biopolymer may present new properties through modifications with exogenous compounds. The present review, explores and discusses recent studies (last five years) that report the optimization of BC production and its yield as well as in situ and ex situ modifications, resulting in improved mechanical, antioxidant, and antimicrobial properties of BC for new applications.

Development, characterization and antimicrobial activity of sodium dodecyl sulfate-polysaccharides capsules containing eugenol.

This work describes the production of polysaccharide multilayer capsules to control the release of Eugenol (Eug) and enabling its use as an antimicrobial agent. For this propose, oil-in-water nanoemulsions of sodium dodecyl sulfate were coated with alternating depositions of chitosan and carboxymethylcellulose using the Layer-by-Layer (LbL) technique, resulting in capsules containing 1-5 layers. The average size ranged from 188 ±â€¯30 (LbL1) to 1415 ±â€¯517 nm (LbL5). The maximum incorporation efficiency was 70.8 ±â€¯2.7 % for Eug-SDS-LbL1. The initial burst releases decreased in proportion to the increase in the number of polysaccharide layers (22.3 ±â€¯3.1 %-12.8 ±â€¯1.6 %), and are influenced by the pH. These systems exhibited antifungal activity against Aspergillus niger, Trichoderma sp, Gliocladium sp, and Candida albicans, and Eug minimum inhibitory concentrations were lower as compared to those of the free agent. Therefore, these capsules represent promising antifungal materials for application in various fields.

Solid-state fermentation with orange waste: optimization of Laccase production from Pleurotus pulmonarius CCB-20 and decolorization of synthetic dyes

Laccases are oxidoreductase enzymes that have the ability to oxidize phenolic substrates. Its biotechnological potential has been greatly explored in many areas as biotechnology industry, bioremediation of dyes, food industry and environmental microbiology. The aim of this study was maximize the laccase production by Pleurotus pulmonarius (Fr.) Quélet in solid-state fermentation (SSF) using orange waste as substrate. After optimization the capability of the crude laccase to decolorize dyes was analyzed. The fermentation medium in the solid-state was optimized by applying a factorial design. After statistics optimization, laccase activity increased two times. The laccase activity appears to be correlated with the ability of crude extract to decolorize some industrial dyes. The optimized laccase was characterized with respect to optimum pH, influence of temperature and salts. Our results demonstrate that P. pulmonarius was an efficient producer of an important industrial enzyme, laccase, in a cheap solid-state system using orange waste as substrate.

Improvement of phenolic compound bioaccessibility from yerba mate (Ilex paraguariensis) extracts after biosorption on Saccharomyces cerevisiae.

Great efforts have been made to increase the bioaccessibility of bioactive compounds from plant sources. This can be achieved by the innovative and effective method of biosorption of these compounds in Saccharomyces cerevisiae obtained from the industrial fermentative process (waste yeast). In this context, this research evaluated if chemical modifications of depleted yeast can improve the capacity to biosorb the phenolic compounds and if through in vitro digestion tests, this approach can increase bioaccessibility of the secondary metabolites from yerba mate. The results showed that the chemical modification of the yeast promoted an increase in the biosorption efficiency of the bioactive compounds. Mass spectrometry peaks for the phenolic compounds reduced after biosorption as observed for the caffeic and dicaffeoylquinic acids and for kaempferol and rutin. In addition, a 10% reduction of caffeine was verified after biosorption, quantified by mass spectrometry chromatography. This showing that the compounds were retained in the cells, which was also observed by an increase of cell turgidity with scanning electron microscopy (SEM). Mid-infrared spectroscopy showed that the major bands related to the components of the compounds increased proportionally after biosorption. Furthermore, an increase of bioaccessibility of the yerba mate bioactive compounds adsorbed in S. cerevisiae was verified when compared with the crude extract.

Multi-block analysis for the correlation of physico-chemical and rheological data of 42 fruit pulps.

The common dimension (ComDim) chemometric method for multi-block analysis and hierarchical cluster analysis (HCA) were used to evaluate the data obtained from the physico-chemical and rheological characterization of 42 commercial fruit pulps. The physico-chemical characteristics and the rheological behavior of the pulps were found to be considerably different. The Herschel-Bulkley equation was fit to the steady-state flow curves of the fruit pulps, and it was found to appropriately describe the materials, which showed a wide range of yield stresses. The soluble solids content and the yield stress were the main factors responsible for the sample discrimination in the multivariate statistical analysis. The ComDim model indicates that these parameters may have a direct correlation. Namely, the soluble solids amount can influence the viscosity, as demonstrated by the similar scores of the samples in both common components, and this corroborated with the HCA analysis. PRACTICAL APPLICATIONS: Fruit pulps can be used as raw materials in the food industry to obtain several products, such as nectars, jellies, ice creams, and juices, which can also be sold directly to consumers. To evaluate the technical and economic feasibility of those industrial processes, it is important to know the physico-chemical properties of the products. Therefore, in this study we attempt to correlate the physical-chemical and rheological data using a new statistical approach.

Multi-block analysis coupled with GC-FID and ATR-MIR for the evaluation of thermal degradation in vegetable oils.

The effect of heating in twenty-four different oil samples was evaluated via iodine value (IV), gas chromatography (GC) and mid-infrared (MIR) analyses. Common components and specific weights analysis (CCSWA) was applied to distribute the samples according to their most relevant characteristics, thereby revealing the influence of heating on composition. Instrumental analysis indicated a high amount of beneficial fatty acids, such as alpha-linolenic acid, in less exploited oils such as chia oil. This oil can present nutritional damage when subjected to high temperatures and is thus less recommended for frying. Conversely, oils containing high amounts of linoleic acid, such as almond and nut oils, as well as those containing equivalent amounts of alpha-linolenic and linoleic acids, such as golden flaxseed and flaxseed oils, displayed greater resistance to temperature. The 3008/cm band exhibited greater intensity in oils with a higher degree of unsaturation, such as chia and linseed oils, a phenomenon mainly influenced by the presence of linoleic and alpha-linolenic fatty acids. After heating, there was a decrease in the intensity of this band. The main parameter discriminating the tested oil samples based on CCSWA was the degree of unsaturation. Overall, the employed statistical method was effective in analyzing the data obtained via the applied techniques, revealing the influence of each assessed parameter.

New phytochemicals as potential human anti-aging compounds: Reality, promise, and challenges.

Aging is an inevitable process influenced by genetic, lifestyle, and environmental factors. Indirect evidence shows that several phytochemicals can have anti-aging capabilities, although direct evidence in this field is still limited. This report aims to provide a critical review on aspects related to the use of novel phytochemicals as anti-aging agents, to discuss the obstacles found when performing most anti-aging study protocols in humans, and to analyze future perspectives. In addition to the extensively studied resveratrol, epicatechin, quercetin, and curcumin, new phytochemicals have been reported to act as anti-aging agents, such as the amino acid L-theanine isolated from green tea, and the lignans arctigenin and matairesinol isolated from Arctium lappa seeds. Furthermore, this review discusses the application of several new extracts rich in phytochemicals with potential use in anti-aging therapies. Finally, this review also discusses the most important biomarkers to test anti-aging interventions, the necessity of conducting epidemiological studies and the need of clinical trials with adequate study protocols for humans.

Physicochemical properties of modified citrus pectins extracted from orange pomace.

Modified pectin is a polysaccharide rich in galacturonic acid altered by pH adjustment and thermal treatment used especially as an anti-cancer agent. The aim of this work was to study the physical and chemical properties of modified pectins extracted from orange pomace with citric and nitric acids. The galacturonic acid content, degree of esterification, Fourier Transform Infrared Spectroscopy profile, molecular weight, intrinsic viscosity, rheological properties and antioxidant activity of the pectins were evaluated. The modification process caused the de-esterification of pectins and a decrease of molecular weight due to removal of neutral sugars, maintaining the linear chain of galacturonic acid. Such changes also caused a significant increase in the in vitro antioxidant activity (p ≤ 0.05) and influenced the rheological properties of pectin, reducing its viscosity. This work showed that the modification of pectin from orange pomace with citric and nitric acids altered its structural and physical characteristics as well as its biological activity toward a free-radical.