The development of an inline Raman spectroscopic analysis method as a quality control tool for hot melt extruded ramipril fixed-dose combination products.

Currently in the pharmaceutical industry, continuous manufacturing is an area of significant interest. In particular, hot-melt extrusion (HME) offers many advantages and has been shown to significantly reduce the number of processing steps relative to a conventional product manufacturing line. To control product quality during HME without process interruption, integration of inline analytical technology is critical. Vibrational spectroscopy (Raman, NIR and FT-IR) is often employed and used for real-time measurements because of the non-destructive and rapid nature of these analytical techniques. However, the establishment of reliable Process Analytical Technology (PAT) tools for HME of thermolabile drugs is challenging. Indeed, the Raman effect is inherently weak and might be subject to interference. Moreover, during HME, heating and photodecomposition can occur and disrupt spectra acquisition. The aim of this research article was to explore the use of inline Raman spectroscopy to characterise a thermolabile drug, ramipril (RMP), during continuous HME processing. Offline measurements by HPLC, LC-MS and Raman spectroscopy were used to characterise RMP and its main degradation product, ramipril-diketopiperazine (RMP-DKP, impurity K). A set of HME experiments together with inline Raman spectroscopic analyses were performed. The feasibility of implementing inline Raman spectroscopic analysis to quantify the level of RMP and RMP-DKP in the extrudate was addressed. Two regions in the Raman spectrum were selected to differentiate RMP and RMP-DKP. When regions were combined, a principle component analysis (PCA) model defined by these two main components (PC 1 = 50.1% and PC 2 = 45%) was established. Using HPLC analyses, we were able to confirm that the PC 1 score was attributed to the level of RMP-DKP, and the PC 2 score was related to the RMP drug content. Investigation of the PCA scatterplot indicated that HME processing temperature was not the only factor causing RMP degradation. Additionally, the plasticiser content, feeding speed and screw rotating speed contributed to RMP degradation during HME processing.

A comparative study between hot-melt extrusion and spray-drying for the manufacture of anti-hypertension compatible monolithic fixed-dose combination products.

The purpose of this work was to investigate the application of different advanced continuous processing techniques (hot melt extrusion and spray drying) to the production of fixed-dose combination (FDC) monolithic systems comprising of hydrochlorothiazide and ramipril for the treatment of hypertension. Identical FDC formulations were manufactured by the two different methods and were characterised using powder X-ray diffraction (PXRD) and modulated differential scanning calorimetry (mDSC). Drug dissolution rates were investigated using a Wood's apparatus, while physical stability was assessed on storage under controlled temperature and humidity conditions. Interestingly both drugs were transformed into their amorphous forms when spray dried, however, hydrochlorothiazide was determined, by PXRD, to be partially crystalline when hot melt extruded with either polymer carrier (Kollidon® VA 64 or Soluplus®). Hot melt extrusion was found to result in significant degradation of ramipril, however, this could be mitigated by the inclusion of the plasticizer, polyethylene glycol 3350, in the formulation and appropriate adjustment of processing temperature. The results of intrinsic dissolution rate studies showed that hot-melt extruded samples were found to release both drugs faster than identical formulations produced via spray drying. However, the differences were attributable to the surface roughness of the compressed discs in the Wood's apparatus, rather than solid state differences between samples. After a 60-day stability study spray dried samples exhibited a greater physical stability than the equivalent hot melt extruded samples.

Gastroretentive extended-release floating granules prepared using a novel fluidized hot melt granulation (FHMG) technique.

The objective of this work was to investigate the feasibility of using a novel granulation technique, namely, fluidized hot melt granulation (FHMG), to prepare gastroretentive extended-release floating granules. In this study we have utilized FHMG, a solvent free process in which granulation is achieved with the aid of low melting point materials, using Compritol 888 ATO and Gelucire 50/13 as meltable binders, in place of conventional liquid binders. The physicochemical properties, morphology, floating properties, and drug release of the manufactured granules were investigated. Granules prepared by this method were spherical in shape and showed good flowability. The floating granules exhibited sustained release exceeding 10 h. Granule buoyancy (floating time and strength) and drug release properties were significantly influenced by formulation variables such as excipient type and concentration, and the physical characteristics (particle size, hydrophilicity) of the excipients. Drug release rate was increased by increasing the concentration of hydroxypropyl cellulose (HPC) and Gelucire 50/13, or by decreasing the particle size of HPC. Floating strength was improved through the incorporation of sodium bicarbonate and citric acid. Furthermore, floating strength was influenced by the concentration of HPC within the formulation. Granules prepared in this way show good physical characteristics, floating ability, and drug release properties when placed in simulated gastric fluid. Moreover, the drug release and floating properties can be controlled by modification of the ratio or physical characteristics of the excipients used in the formulation.

The activated partial thromboplastin time in early diagnosis of myocardial infarction.

Intracoronary thrombosis is fundamental to the pathogenesis of acute myocardial infarction (MI), yet few studies have examined the diagnostic value of routine coagulability markers, such as the activated partial thromboplastin time (aPTT), in patients with chest pain. We hypothesized that the initiation of thrombosis early in MI would shorten the aPTT, and conducted a retrospective cohort study of patients admitted with a diagnosis of chest pain through the emergency department of one community hospital between 1 January and 30 August 1998. Patients were diagnosed as MI positive or negative based on World Health Organization (WHO) criteria. The aPTT obtained on arrival (prior to anticoagulation therapy) was retrieved from the electronic medical record. Of 120 eligible patients (49% female, mean age 63.7 years), 27 (23%) were diagnosed with MI. Patients with an aPTT control (RR = 2.83, 95% confidence interval 1.15 to 6.96, P = 0.013). A shortened aPTT (

Comparison of high-efficiency and standard haemodialysis providing equal urea clearances by partial and total dialysate quantification.

BACKGROUND: Short-duration high-efficiency haemodialysis has been utilized increasingly in recent years to deliver adequate blood urea clearances per dialysis session. However, high-efficiency and standard-duration haemodialysis schedules, which achieve equal patient urea clearances, may not represent equivalent dialytic therapy due to solute differences in intercompartmental dysequilibrium during dialysis and differences in dialysis mechanics. METHODS: To circumvent the effects of intercompartmental dysequilibrium and postdialysis rebound solute clearances were measured by direct dialysis quantification (total and partial dialysate collections) rather than blood clearances. High-efficiency haemodialysis (dialyser blood flow rate = 400 ml/min; dialysis time = 170.67 min) was compared with standard haemodialysis (dialyser blood flow rate = 200 ml/min; dialysis time = 240 min) performed in random order in six anuric patients using Fresenius F8 dialysers and the same haemodialysis machine. Such haemodialysis schedules were prescribed to provide equivalent urea clearances. RESULTS: Patient plasma water urea clearances measured by direct dialysis quantification were equivalent, whereas high efficiency haemodialysis achieved significantly lower phosphate clearances (P = 0.01), less net bicarbonate absorption (P = 0.01), and lower beta 2 microglobulin removal (P < 0.001) than standard haemodialysis. Estimated total dialysate effluent volumes with partial dialysate collection and total dialysate collection correlated closely (r = 0.95) and there were no differences between patient urea, creatinine and phosphate clearances measured by partial and total dialysate quantification. CONCLUSIONS: The data indicate that even if high-efficiency and standard haemodialysis provide equal whole-body urea clearances, delivered dialysis therapy is not equivalent. The partial dialysate collection method is as accurate as the cumbersome total dialysate collection approach and may be applied to assess delivered dialysis dose by minor modification of current haemodialysis machines.