Simple and promising paper-based electrochemical platform for serological detection of American tegumentary leishmaniasis.

BACKGROUND: American tegumentary leishmaniasis (ATL) is an endemic neglected tropical disease (NTD), its conventional treatment is toxic, slow, and invasive. Rapid diagnosis is crucial for the clinical management of suspected patients, so the development and use of low-cost, miniaturised and portable devices could be the key. OBJECTIVES: This work aimed to develop a simple paper-based electrochemical platform for the serological detection of ATL. METHODS: Platform was fabricated in Whatman N°1 paper, contains a hydrophobic zone generated by wax printing, two pencil graphite electrodes, and uses specific crude extracts (CA) antigens for ATL immuno-determination. The platform performance was analysed by measuring the relative impedance change for different antigen-antibody combinations. Then, 10 serum human samples previously diagnosed by the gold standard (five positive ATL cases and five non-ATL cases) were evaluated. FINDINGS: The platform presented a linear response for the charge transfer resistance (ΔRct) and the interface reactance (ΔXc). Also, optimal working conditions were established (1/60 serum dilution and 180 µg/mL CA concentration). Then, the platform permits to distinguish between ATL and non-ATL (p < 0.05) human serum samples. MAIN CONCLUSIONS: Our platform could allow the diagnosis, management, and monitoring of leishmaniasis while being an extremely simple and environmentally friendly technology.

Simple and promising paper-based electrochemical platform for serological detection of American tegumentary leishmaniasis

BACKGROUND American tegumentary leishmaniasis (ATL) is an endemic neglected tropical disease (NTD), its conventional treatment is toxic, slow, and invasive. Rapid diagnosis is crucial for the clinical management of suspected patients, so the development and use of low-cost, miniaturised and portable devices could be the key. OBJECTIVES This work aimed to develop a simple paper-based electrochemical platform for the serological detection of ATL. METHODS Platform was fabricated in Whatman N°1 paper, contains a hydrophobic zone generated by wax printing, two pencil graphite electrodes, and uses specific crude extracts (CA) antigens for ATL immuno-determination. The platform performance was analysed by measuring the relative impedance change for different antigen-antibody combinations. Then, 10 serum human samples previously diagnosed by the gold standard (five positive ATL cases and five non-ATL cases) were evaluated. FINDINGS The platform presented a linear response for the charge transfer resistance (ΔRct) and the interface reactance (ΔXc). Also, optimal working conditions were established (1/60 serum dilution and 180 µg/mL CA concentration). Then, the platform permits to distinguish between ATL and non-ATL (p < 0.05) human serum samples. MAIN CONCLUSIONS Our platform could allow the diagnosis, management, and monitoring of leishmaniasis while being an extremely simple and environmentally friendly technology.

Women in Biosensors Science.

From the first glucose biosensor from Updike and Hicks (1968), there was an explosion of research in biosensors for detecting a wide range of analytes [...].

Smartphone-Based Biosensor Devices for Healthcare: Technologies, Trends, and Adoption by End-Users.

Smart biosensors are becoming an important support for modern healthcare, even more so in the current context. Numerous smartphone-based biosensor developments were published in recent years, some highly effective and sensitive. However, when patents and patent applications related to smart biosensors for healthcare applications are analyzed, it is surprising to note that, after significant growth in the first half of the decade, the number of applications filed has decreased considerably in recent years. There can be many causes of this effect. In this review, we present the state of the art of different types of smartphone-based biosensors, considering their stages of development. In the second part, a critical analysis of the possible reasons why many technologies do not reach the market is presented. Both technical and end-user adoption limitations were addressed. It was observed that smart biosensors on the commercial stage are still scarce despite the great evolution that these technologies have experienced, which shows the need to strengthen the stages of transfer, application, and adoption of technologies by end-users.

Continuous flow generation of magnetoliposomes in a low-cost portable microfluidic platform.

We present a low-cost, portable microfluidic platform that uses laminated polymethylmethacrylate chips, peristaltic micropumps and LEGO® Mindstorms components for the generation of magnetoliposomes that does not require extrusion steps. Mixtures of lipids reconstituted in ethanol and an aqueous phase were injected independently in order to generate a combination of laminar flows in such a way that we could effectively achieve four hydrodynamic focused nanovesicle generation streams. Monodisperse magnetoliposomes with characteristics comparable to those obtained by traditional methods have been obtained. The magnetoliposomes are responsive to external magnetic field gradients, a result that suggests that the nanovesicles can be used in research and applications in nanomedicine.

Real-time measurement of glucose using chrono-impedance technique on a second generation biosensor.

Chrono-impedance technique (CIT) was implemented as a new transduction method for real time measurement of glucose in a biosensor system based in carbon paste (CP)/Ferrocene (FC)/glucose oxidase (GOx). The system presents high selectivity because the optimal stimulation signal composed by a 165mV DC potential and 50mV(RMS) AC signal at 0.4Hz was used. The low DC potential used decreased the interfering species effect and the biosensor showed a linear impedance response toward glucose detection at concentrations from 0mM to 20mM,with 0.9853 and 0.9945 correlation coefficient for impedance module (|Z|) and phase (Φ), respectively. The results of quadruplicate sets reveal the high repeatability and reproducibility of the measurements with a relative standard deviation (RSD) less than 10%. CIT presented good accuracy (within 10% of the actual value) and precision did not exceed 15% of RSD for high concentration values and 20% for the low concentration ones. In addition, a high correlation coefficient (R(2)=0.9954) between chrono-impedance and colorimetric methods was obtained. On the other hand, when two samples prepared at the same conditions were measured in parallel with both methods (the measurement was repeated four times), it should be noticed that student's t-test produced no difference between the two mentioned methods (p=1). The biosensor system hereby presented is highly specific to glucose detection and shows a better linear range than the one reported on the previous article.

Bio-recognition capability of Streptomyces sp. M7 evaluated in adverse conditions for use as a biological transducer in a Lindane biosensor.

Bio-recognition devices have captured special attention because they combine biological specificity and selectivity with electronics to perform environmental and biomedical analysis. Lindane is a recalcitrant pesticide considered potential carcinogen that has caused serious pollution problems. The purpose of the present study is to evaluate Streptomyces sp. M7 ability to dechlorinate lindane in liquid defined media in adverse culture conditions. Bacterial activity was monitored by electrochemical impedance spectroscopy. These results confirm that the microorganism adhered to a solid support is able to grow and to metabolize the organochlorine pesticide as a sole carbon source. Therefore, Streptomyces sp. M7 can be applied for a future development of a prototype for lindane detection and quantification.

Evaluation of chrono-impedance technique as transduction method for a carbon paste/glucose oxidase (CP/GOx) based glucose biosensor.

The chrono-impedance technique (CIT) for real time determination of glucose concentration in a first generation glucose oxidase/carbon paste electrode was implemented. The biosensor was polarized with a signal composed of 900 mV DC potential and 50 mV(RMS) AC signal at 0.4 Hz. A frequency response analyzer was used to measure the complex impedance (magnitude |Z| and phase (Φ)) of the biosensor-bulk interface. Real time measurements were performed while glucose was added to the bulk within a concentration range of 0-40 mM. The cumulative impedance dose-response curves were used to construct calibration curves, both for magnitude and phase. The best fitting was obtained with a hyperbolic equation. Four biosensors were built obtaining five calibration curves for each of them. A single test measurement (unknown glucose concentration) was also obtained after each calibration procedure. Glucose concentrations were estimated with the calibration curves and also measured by colorimetry, the latter being the reference method. Besides, one-way ANOVA test evaluated repeatability. Difference between means was not statistically significant (p>0.01) for both magnitudes (|Z| and Φ). The Student's t-test assessed the differences significance, which produced in all cases p levels lower or equal than 0.44. Thus, CIT was proved to be a reliable method to measure glucose concentration in real time. Moreover, it showed high repeatability and compared well against colorimetry (r(2)=0.98).