Self-Assembly of Peptide-Conjugated Forklike Mesogens at Aqueous/Liquid Crystalline Interfaces: Molecular Design for Ordering Transition Induced by Specific Binding of Biomolecules.

Self-assembly of functional liquid crystals provides a powerful approach to the development of stimuli-responsive materials and interfaces. Here, we have designed and synthesized bioconjugated amphiphilic dendritic mesogens containing arginine-glycine-aspartic acid (RGD) peptide sequence to develop new biofunctional aqueous/liquid crystalline interfaces. We have found that the RGD peptide-conjugated forklike mesogens induce the homeotropic alignment of liquid crystals at the aqueous interfaces, leading to distinct optical changes caused by the specific binding of the target proteins. In contrast, no response to the target protein is observed for the interfaces prepared with the RGD peptide-conjugated single mesogen. Molecular insights into the orientation and stimuli-responsiveness of the bioconjugated mesogens at the interfaces are obtained based on measurements of the Langmuir films and self-assembled properties of these molecules. These results demonstrate that the number of rodlike cores of the bioconjugated mesogens affects the monolayer structures formed at the aqueous interface as well as the liquid crystalline properties. We propose a new molecular design of bioconjugated mesogens to couple biomolecular interactions at the aqueous interfaces with the ordering transition of the liquid crystals. These materials have the potential to tailor the responsiveness of liquid crystalline interfaces for biomolecular sensing.

Air/liquid interfacial formation process of conductive metal-organic framework nanosheets.

The air/liquid interface is a superior platform to create nanosheets of materials by promoting spontaneous two-dimensional growth of components. Metal-organic frameworks (MOFs)-intrinsically porous crystals-with π-conjugated triphenylene-based ligands show high electrical conductivities. Forming nanosheets of such conductive MOFs should enable their use in electronic devices. Although highly conductive MOF nanosheets have been created at the air/liquid interface, direct control of their continuity, morphology, thickness, crystallinity, and orientation directly influencing device performance remains as an issue to be addressed. Here, we present detailed insights into the formation process of electrically conductive MOF nanosheets composed of 2,3,6,7,10,11-hexaiminotriphenylene (HITP) and Ni2+ ions (HITP-Ni-NS) at the air/liquid interface. The morphological and structural features of HITP-Ni-NS strongly depend on the standing time-the time without any external actions involved, but leaving the interface undisturbed after setting the ligand solution onto the metal-ion solution. We find that the fundamental features of HITP-Ni-NS are determined by the standing time with conductivity sensitively influenced by such pre-determined HITP-Ni-NS characteristics. These findings will lead towards the establishment of a rational strategy for creating MOF nanosheets at the air/liquid interface with desired properties, thereby accelerating their use in diverse potential applications.

Assembling Triphenylene-Based Metal-Organic Framework Nanosheets at the Air/Liquid Interface: Modification by Tuning the Spread Solution Concentration.

Metal-organic frameworks (MOFs)─crystalline coordination polymers─with unique characteristics such as structural designability accompanied by tunable electronic properties and intrinsic uniform nanopores have become the platform for applications in diverse scientific areas ranging from nanotechnology to energy/environmental sciences. To utilize the superior features of MOF in potential applications, the fabrication and integration of thin films are of importance and have been actively sought. Especially, downsized MOFs into nanosheets can act as ultimately thin functional components in nanodevices and potentially display unique chemical/physical properties rarely seen in bulk MOFs. Assembling nanosheets by aligning amphiphilic molecules at the air/liquid interface has been known as the Langmuir technique. By utilizing the air/liquid interface as a reaction field between metal ions and organic ligands, MOFs are readily formed into the nanosheet state. The expected features in MOF nanosheets including electrical conduction largely depend on the nanosheet characteristics such as lateral size, thickness, morphology, crystallinity, and orientation. However, their control has not been achieved as yet. Here, we demonstrate how changing the concentration of a ligand spread solution can modify the assembly of MOF nanosheets, composed of 2,3,6,7,10,11-hexaiminotriphenylene (HITP) and Ni2+ ions (HITP-Ni-NS), at the air/liquid interface. A systematic increase in the concentration of the ligand spread solution leads to the enlargement of both the lateral size and the thickness of the nanosheets while retaining their perfect alignment and preferred orientation. On the other hand, at much higher concentrations, we find that unreacted ligand molecules are included in HITP-Ni-NS, introducing disorder in HITP-Ni-NS. These findings can develop further sophisticated control of MOF nanosheet features, accelerating fundamental and applied studies on MOFs.

Ambipolar Nickel Dithiolene Complex Semiconductors: From One- to Two-Dimensional Electronic Structures Based upon Alkoxy Chain Lengths.

Air-stable single-component ambipolar organic semiconductors that conduct both holes and electrons are highly desired but have been rarely realized. Neutral nickel bis(dithiolene) complexes are promising candidates that fulfill the stringent electronic requirements of shallow HOMO levels and deep LUMO levels, which can reduce the carrier injection barrier to overcome the work function of gold electrodes and ensure air stability. However, most nickel bis(dithiolene) analogs that have been characterized as ambipolar semiconductors have twisted molecular structures that hinder the effective intermolecular interactions required for carrier conduction. To address this issue, we synthesized planar alkoxy-substituted nickel bis(dithiolene) analogs that facilitate dense packing with effective intermolecular interactions. Remarkably, changing the methoxy substituents to ethoxy or propoxy groups led to a dramatic change in the packing mode, from one-dimensional to herringbone-like, while maintaining effective intermolecular interactions. These materials overcome the usual trade-off between crystallinity and solubility; they are highly crystalline, even in their film forms, and are highly soluble in organic solvents. They are therefore readily solution-processable to form semiconducting layers with well-defined and well-ordered structures in field-effect transistors. Devices based on these compounds exhibited efficient ambipolar characteristics, even after several months of exposure to air, achieving high carrier mobilities of up to 10-2 cm2 V-1 s-1 and large on/off ratios of up to 105, which are the top-class performances achieved for a single-component ambipolar semiconductor material driven in air.

Uniaxially Oriented Electrically Conductive Metal-Organic Framework Nanosheets Assembled at Air/Liquid Interfaces.

Although most metal-organic frameworks (MOFs)─highly porous crystalline metal complex networks with structural and functional varieties─are electrically insulating, high electrical conduction has been recently demonstrated in MOFs while retaining permanent porosity. Usability of electronically active MOFs effectively emerges when they are created in a thin-film state as required in major potential applications such as chemiresistive sensors, supercapacitors, and electrode catalysts. Thin-film morphology including crystallinity, thickness, density, roughness, and orientation sensitively influences device performance. Fine control of such morphological parameters still remains as a main issue to be addressed. Here, we report a bottom-up procedure of assembling a conductive MOF nanosheet composed of 2,3,6,7,10,11-hexaiminotriphenylene molecules and nickel ions (HITP-Ni-NS). Creation of HITP-Ni-NS is achieved by applying air/liquid (A/L) interfacial bottom-up synthesis. HITP-Ni-NS has a multilayered structure with 14 nm thickness and is endowed with high crystallinity and uniaxial orientation, demonstrated by synchrotron X-ray crystallography. Facile transferability of HITP-Ni-NS assembled at air/liquid interfaces to any desired substrate enables us to measure its electrical conductivity, recorded as 0.6 S cm-1─highest among those of triphenylene-based MOF nanosheets with a thickness lower than 100 nm.

Air/Liquid Interfacial Nanoassembly of Molecular Building Blocks into Preferentially Oriented Porous Organic Nanosheet Crystals via Hydrogen Bonding.

Nanosheets with highly regulated nanopores are ultimately thin functional materials for diverse applications including molecular separation and detection, catalysis, and energy conversion and storage. However, their availability has hitherto been restricted to layered parent materials, covalently bonded sheets, which are layered via relatively weak electrostatic interactions. Here, we report a rational bottom-up methodology that enables nanosheet creation beyond the layered systems. We employ the air/liquid interface to assemble a triphenylbenzene derivative into perfectly oriented highly crystalline noncovalent-bonded organic nanosheets under ambient conditions. Each molecular building unit connects laterally by hydrogen bonding, endowing the nanosheets with size- and position-regulated permanent nanoporosity, as established by in situ synchrotron X-ray surface crystallography and gas sorption measurements. Notably, the nanosheets are constructed specifically by interfacial synthesis, which suppresses the intrinsic complex interpenetrated structure of the bulk crystal. Moreover, they possess exceptional long-term and thermal stability and are easily transferrable to numerous substrates without loss of structural integrity. Our work shows the power of interfacial synthesis using a suitably chosen molecular component to create two-dimensional (2D) nanoassemblies not accessible by conventional bulk crystal exfoliation techniques.

Optimization of dendrimer structure for sentinel lymph node imaging: Effects of generation and terminal group.

The detection of the sentinel lymph node (SLN), the first lymph node draining tumor cells, is important in cancer diagnosis and therapy. Dendrimers are synthetic macromolecules with highly controllable structures, and are potent multifunctional imaging agents. In this study, 12 types of dendrimer of different generations (G2, G4, G6, and G8) and different terminal groups (amino, carboxyl, and acetyl) were prepared to determine the optimal dendrimer structure for SLN imaging. Radiolabeled dendrimers were intradermally administrated to the right footpads of rats. All G2 dendrimers were predominantly accumulated in the kidney. Amino-terminal, acetyl-terminal, and carboxyl-terminal dendrimers of greater than G4 were mostly located at the injection site, in the blood, and in the SLN, respectively. The carboxyl-terminal dendrimers were largely unrecognized by macrophages and T-cells in the SLN. Finally, SLN detection was successfully performed by single photon emission computed tomography imaging using carboxyl-terminal dendrimers of greater than G4. FROM THE CLINICAL EDITOR: The early detection of tumor cells in the sentinel draining lymph nodes (SLN) is of utmost importance in terms of determining cancer prognosis and devising treatment. In this article, the authors investigated various formulations of dendrimers to determine the optimal one for tumor detection. The data generated from this study would help clinicians to fight the cancer battle in the near future.

Liquid-phase step-by-step growth of an iron cyanide coordination framework on LiCoO2 particle surfaces.

Surface modification of inorganic objects with metal-organic frameworks (MOFs) - organic-inorganic hybrid framework materials with infinite networks - opens wide windows for potential applications. In order to derive a target property, the key is the ability to fine tune the degree of modification. Solution-based step-by-step growth techniques provide excellent control of layer thickness which can be varied with the number of deposition cycles. Such techniques with MOFs have been mainly applied to flat substrates, but not to particle surfaces before. Here, we present the facile surface modification of inorganic particles with a framework compound under operationally simple ambient conditions. A solution-based sequential technique involving the alternate immersion of LiCoO2 (LCO) - a positive electrode material for a lithium ion battery - into FeCl2·4H2O and K3[Fe(CN)6] solutions results in the formation of Prussian blue (PB) nanolayers on the surface of the LCO particles (PBNL@LCO). The PB growth is finely controlled by the number of immersion cycles. An electrochemical cell with PBNL@LCO as a positive electrode material exhibits a discharge capacity close to the specific capacity of LCO. The results open a new direction for creating suitable interfacial conditions between electrode materials and electrolytes in secondary battery materials.

External stimulation-controllable heat-storage ceramics.

Commonly available heat-storage materials cannot usually store the energy for a prolonged period. If a solid material could conserve the accumulated thermal energy, then its heat-storage application potential is considerably widened. Here we report a phase transition material that can conserve the latent heat energy in a wide temperature range, T<530 K and release the heat energy on the application of pressure. This material is stripe-type lambda-trititanium pentoxide, λ-Ti3O5, which exhibits a solid-solid phase transition to beta-trititanium pentoxide, ß-Ti3O5. The pressure for conversion is extremely small, only 600 bar (60 MPa) at ambient temperature, and the accumulated heat energy is surprisingly large (230 kJ L(-1)). Conversely, the pressure-produced beta-trititanium pentoxide transforms to lambda-trititanium pentoxide by heat, light or electric current. That is, the present system exhibits pressure-and-heat, pressure-and-light and pressure-and-current reversible phase transitions. The material may be useful for heat storage, as well as in sensor and switching memory device applications.

Toward step-by-step nuclear growth of surface two-dimensional porphyrin nanonetworks.

We report the development of a solution-based step-by-step technique, which utilizes the coordination bond between metalloporphyrin molecular units and metal linkages and results in the nuclear growth of nano-networks on solid substrates. The growth of the surface structures is strongly influenced by the choice of substrate materials and solvents: the molecule-substrate interaction and the solubility of the molecular units are important parameters in tuning the size and growth of the domains.

Bottom-up assembly of ultrathin sub-micron size metal-organic framework sheets.

A solution-based two-dimensional interfacial reaction between 5,10,15,20-tetra(4-pyridyl)-porphinato zinc(II) (ZnTPyP, 1) and Cu(NO3)2·3H2O, 2, results in the assembly of uniform preferentially oriented highly crystalline metal-organic framework nanosheets, NAFS-21 that have sub-micron planar size and mono-molecular thickness.

Interfacial growth of large-area single-layer metal-organic framework nanosheets.

The air/liquid interface is an excellent platform to assemble two-dimensional (2D) sheets of materials by enhancing spontaneous organizational features of the building components and encouraging large length scale in-plane growth. We have grown 2D molecularly-thin crystalline metal-organic-framework (MOF) nanosheets composed of porphyrin building units and metal-ion joints (NAFS-13) under operationally simple ambient conditions at the air/liquid interface. In-situ synchrotron X-ray diffraction studies of the formation process performed directly at the interface were employed to optimize the NAFS-13 growth protocol leading to the development of a post-injection method -post-injection of the metal connectors into the water subphase on whose surface the molecular building blocks are pre-oriented- which allowed us to achieve the formation of large-surface area morphologically-uniform preferentially-oriented single-layer nanosheets. The growth of such large-size high-quality sheets is of interest for the understanding of the fundamental physical/chemical properties associated with ultra-thin sheet-shaped materials and the realization of their use in applications.

Designer coordination polymers: dimensional crossover architectures and proton conduction.

Coordination polymers (CPs) have large degrees of freedom in framework compositions and in the structures and environment of the inner pores. This review focuses on the recent significant progress achieved by controlling these degrees of freedom. Two breakthroughs are reviewed for constructing sophisticated structures of CP frameworks, especially in dimensional crossover regions. The first is the synthesis of quasi one-dimensional halogen-bridged coordinative tubes by applying state-of-the-art techniques of coordination chemistry. The electronic state of the coordinative tube was studied by structural, spectroscopic and theoretical methods and found to be distinct from conventional one-dimensional systems. The second breakthrough is the achievement of a quasi-two-dimensional architecture by combining Langmuir-Blodgett and layer-by-layer methods. Two-dimensional LB CP films were prepared on liquid; the films were stacked layer by layer, and a crystalline quasi-two-dimensional structure was constructed. This review also covers the design of the environment of the inner pore, where hydrogen bond networks with various acidic sites were modified. By appropriate design of the hydrogen bond network, proton-conductive CPs are invented, which are summarized in this review. Types of proton donor sites are discussed and classified, and superprotonic conductive CPs were achieved in these investigations. These results will provide new strategies for constructing functional materials for smart devices.

Single-molecule imaging of gold-binding peptide adsorbed on Au(111).

Inorganic-binding peptides, which exhibit specific binding affinity to an inorganic material, are versatile building blocks in the construction of novel bio-conjugated materials. However, very little knowledge regarding their adsorbed structures on the target material is currently available. In this article, we report on the single-molecule analysis of such polypeptides by scanning tunneling microscopy (STM). The adsorbed structure of a gold-binding peptide (GBP) on Au(111) was observed at the single-molecule level. FTIR spectroscopy revealed the helical structure of the GBP, and ab initio calculations confirmed the correlation between the observed STM image and a sample helical structure. It has been demonstrated that the conformational structure of the polypeptide is highly pre-organized, allowing favorable binding onto the gold surface. Gaining such an insight into the relation between the structure and the binding function of the peptide leads to a fundamental understanding of inorganic-binding peptide, and, consequently, to a rational design of these peptides.

Paclitaxel-loaded hydroxyapatite/collagen hybrid gels as drug delivery systems for metastatic cancer cells.

Hydroxyapatite (HA) is a biocompatible and porous inorganic material that can behave as an effective drug carrier. In this study, HA nanoparticles were prepared according to the hydrothermal method and used as a drug carrier for a water-insoluble anticancer drug, paclitaxel (Tax). The absorption of Tax onto the HA was dependent on the solvent composition. The Tax-loaded HA (Tax/HA) exhibited a lower level of activity than the free Tax because the HA material was not stably dispersed in aqueous media. The Tax/HA was therefore embedded in a collagen gel to give the Tax/HA-embedded collagen gel (Tax/HA/Col), which exhibited a higher level of activity than the Tax-containing collagen gel (Tax/Col). Interestingly, the highly metastatic MDA-MB-231 cells were more sensitive to the Tax/HA/Col than the poorly metastatic MCF-7 cells. Tax/HA/Col is therefore useful for the drug delivery into metastatic cancer cells.

Nanoscale effects on the stability of the λ-Ti3O5 polymorph.

The nanocrystalline valency-delocalized λ-phase of the binary oxide Ti(3)O(5) has recently emerged as a promising phase-change material that exhibits rapid photo-reversible optical and resistance changes at ambient temperature. Nanoscaling caused the monoclinic-λ to monoclinic charge-ordered ß-phase structural instability to shift to considerably lower temperatures compared to the bulk material, and led to a broad thermal hysteresis. The structural transformation was accompanied by a large change in volume and large lattice relaxations, which imply the presence of strong electron-phonon coupling. We attribute the suppression of the phase transition to the enhanced surface energy on the nanoscale.

Highly crystalline nanofilm by layering of porphyrin metal-organic framework sheets.

Layer-structured metal-organic framework (MOF) nanofilms (NAFS-2) consisting of 5,10,15,20-tetrakis(4-carboxyphenyl)porphyrin (H(2)TCPP) molecules and copper ion metal linkers were assembled on a gold or a silicon surface by applying a solution-based layer-by-layer growth technique coupled with the Langmuir-Blodgett method. Synchrotron X-ray diffraction measurements showed that NAFS-2 exhibits highly crystalline order in both the in-plane and out-of-plane orientations. Each MOF sheet (monolayer) adheres without pillaring units, and the nanofilm maintains its highly crystalline order above 200 °C. The results provide an excellent demonstration of how to exercise in a facile way fine control of the assembly of molecule-based hybrid objects and their thermal stability, which is a key issue for the future use of MOFs in potential applications in nanodevices.

Surface nano-architecture of a metal-organic framework.

The rational assembly of ultrathin films of metal-organic frameworks (MOFs)--highly ordered microporous materials--with well-controlled growth direction and film thickness is a critical and as yet unrealized issue for enabling the use of MOFs in nanotechnological devices, such as sensors, catalysts and electrodes for fuel cells. Here we report the facile bottom-up fabrication at ambient temperature of such a perfect preferentially oriented MOF nanofilm on a solid surface (NAFS-1), consisting of metalloporphyrin building units. The construction of NAFS-1 was achieved by the unconventional integration in a modular fashion of a layer-by-layer growth technique coupled with the Langmuir-Blodgett method. NAFS-1 is endowed with highly crystalline order both in the out-of-plane and in-plane orientations to the substrate, as demonstrated by synchrotron X-ray surface crystallography. The proposed structural model incorporates metal-coordinated pyridine molecules projected from the two-dimensional sheets that allow each further layer to dock in a highly ordered interdigitated manner in the growth of NAFS-1. We expect that the versatility of the solution-based growth strategy presented here will allow the fabrication of various well-ordered MOF nanofilms, opening the way for their use in a range of important applications.

Size-controlled stabilization of the superionic phase to room temperature in polymer-coated AgI nanoparticles.

Solid-state ionic conductors are actively studied for their large application potential in batteries and sensors. From the view of future nanodevices, nanoscaled ionic conductors are attracting much interest. Silver iodide (AgI) is a well-known ionic conductor for which the high-temperature alpha-phase shows a superionic conductivity greater than 1 Omega(-1) cm(-1). Below 147 degrees C, alpha-AgI undergoes a phase transition into the poorly conducting beta- and gamma-polymorphs, thereby limiting its applications. Here, we report the facile synthesis of variable-size AgI nanoparticles coated with poly-N-vinyl-2-pyrrolidone (PVP) and the controllable tuning of the alpha- to beta-/gamma-phase transition temperature (Tc). Tc shifts considerably to lower temperatures with decreasing nanoparticle size, leading to a progressively enlarged thermal hysteresis. Specifically, when the size approaches 10-11 nm, the alpha-phase survives down to 30 degrees C--the lowest temperature for any AgI family material. We attribute the suppression of the phase transition not only to the increase of the surface energy, but also to the presence of defects and the accompanying charge imbalance induced by PVP. Moreover, the conductivity of as-prepared 11 nm beta-/gamma-AgI nanoparticles at 24 degrees C is approximately 1.5 x 10(-2) Omega(-1) cm(-1)--the highest ionic conductivity for a binary solid at room temperature. The stabilized superionic phase and the remarkable transport properties at a practical temperature reported here suggest promising applications in silver-ion-based electrochemical devices.