Composition space of PtIrPdRhRu high entropy alloy nanoparticles synthesized by solvothermal reactions.

High entropy alloy (HEA) nanoparticles hold promise in heterogeneous catalysis, and recently, simple and benign solvothermal synthesis was achieved for the equimolar PtIrPdRhRu. Here we experimentally explore the available composition space in this system, and we find that single-phase products can be obtained at significant deviations from the equimolar case.

New opportunities for sustainable bioplastic development: Tailorable polymorphic and three-phase crystallization of stereocomplex polylactide by layered double hydroxide.

Stereocomplexation between enantiomeric poly(l-lactide) (PLLA) and poly(d-lactide) (PDLA) is a promising sustainable approach and gaining momentum to overcome the shortcomings of polylactide (PLA) for its use as a replacement for fossil-based plastics. Filler addition in tailoring the crystallization of stereocomplex PLA (SC-PLA) has attracted extensive attention; however, research has primarily focused on the heterogeneous nucleation effect of filler. The impact of filler on the chain behavior of SC-PLA during crystallization has not been exclusively discussed, and the rigid amorphous fraction (RAF) development remains unknown. In this study, the crystallization of PLLA/PDLA blends was modified by low loading of layered double hydroxide (LDH) (≤ 1 wt%) with the proposed local effect of such filler, and additional RAF development was incurred. In the early stage of crystallization, LDH facilitates the pairing of PLLA and PDLA and arrests the ordered SC pairs during the dynamic balance between the separation and pairing of racemic segments. This explains the severely suppressed homochiral (HC) crystallization, promoted SC crystallization, and additional RAF formation driven by the nucleation-induced chain ordering. This work, for the first time, highlights the role of LDH in creating SC-PLA with tailorable polymorphism and RAF, where the mechanism can be extended to other filler-type nucleator systems.

Scrutinizing particle size related bond strengthening in anatase TiO2.

A series of small, middle, and large anatase TiO2 particles were synthesized through the hydrolysis of titanium tetraisopropoxide (TTIP) to investigate the size-related chemical bond length and strength variation. Unit cell volume contraction with decreasing particle size is identified from Rietveld refinement of high-resolution synchrotron powder X-ray diffraction (PXRD) patterns. More titanium vacancies are also found for smaller anatase particles. Contrary to the variation in unit cell volume, a larger Debye temperature ΘD(TiO2) derived from the linear and nonlinear fitting of atomic displacement parameters (Uiso(TiO2)) as a function of temperature is revealed for smaller anatase particles. The length of the Ti-O bond is also shorter for smaller anatase particles. Furthermore, optical phonon frequencies blue-shifting with the decrease in anatase particle size are determined by Raman spectroscopy. X-ray photoelectron spectroscopy (XPS) analysis rules out the presence of a large amount of Ti3+, while optical diffuse reflectance measurement eliminates the existence of a large number of oxygen vacancies in all particles. Combining the analysis results of PXRD, thermogravimetric analysis (TGA), and Fourier-transform infrared spectroscopy (FTIR), more structural and surface hydroxyls (-OH) appear to exist in smaller anatase particles. It is the structural and surface -OH that are responsible for the size-related chemical bond length and strength variation in the as-synthesized anatase particles.

Synthesis of Phase-Pure Thermochromic VO2 (M1).

A highly reproducible, simple, and inexpensive synthesis method for obtaining phase-pure thermochromic monoclinic VO2 (M1) is presented. Vanadium(III) oxide and ammonium metavanadate were used as starting materials and no additional reducing agents are required. Heating a mixture of these two components under an argon atmosphere at 750 °C for 2-4 h provides the direct formation of VO2 (M1) without detectable impurity phases. The formation reaction of VO2 (M1) was studied using in situ powder X-ray diffraction (PXRD), where a pressed pellet of the precursor material was heated during the continuous collection of PXRD data on a two-dimensional detector. The formation takes place via at least two crystalline intermediate phases where the first forms at 170-185 °C (likely an ammonium and oxygen deficient (NH4)1-δVO3-δ phase), and the second at 230 °C (likely a more disordered phase due to the increased background intensity). We assume that the solid-state reaction between the unknown but likely disordered vanadate phase and vanadium(III) oxide starts at 395 °C in concert with the appearance of several other unknown crystalline phases. At 610-750 °C, phase-pure rutile VO2 (P42/mnm) is obtained, which upon cooling converts to monoclinic VO2 (M1). The product composition, microstructure, and homogeneity are characterized by Raman spectroscopy, scanning electron microscopy, transmission electron microscopy, and energy-dispersive X-ray spectroscopy. The synthesized VO2 (M1) has a sharp reversible insulator-to-metal transition at 71.3 °C during heating and 59.5 °C during cooling, as characterized using differential scanning calorimetry, and resistivity and magnetic property measurements.

Synchrotron X-ray Electron Density Analysis of Chemical Bonding in the Graphitic Carbon Nitride Precursor Melamine.

Melamine is a precursor and building block for graphitic carbon nitride (g-CN) materials, a group of layered materials showing great promise for catalytic applications. The synthetic pathway to g-CN includes a polycondensation reaction of melamine by evaporation of ammonia. Melamine molecules in the crystal organize into wave-like planes with an interlayer distance of 3.3 Šsimilar to that of g-CN. Here we present an extensive investigation of the experimental electron density of melamine obtained from modelling of synchrotron radiation X-ray single-crystal diffraction data measured at 25 K with special focus on the molecular geometry and intermolecular interactions. Both intra- and interlayer structures are dominated by hydrogen bonding and π-interactions. Theoretical gas-phase optimizations of the experimental molecular geometry show that bond lengths and angles for atoms in the same chemical environment (C-N bonds in the ring, amine groups) differ significantly more for the experimental geometry than for the gas-phase-optimized geometries, indicating that intermolecular interactions in the crystal affects the molecular geometry. In the experimental crystal geometry, one amine group has significantly more sp3 -like character than the others, hinting at a possible formation mechanism of g-CN. Topological analysis and energy frameworks show that the nitrogen atom in this amine group participates in weak intralayer hydrogen bonding. We hypothesize that melamine condenses to g-CN within the layers and that the unique amine group plays a key role in the condensation process.

X-ray Electron Density Study of the Chemical Bonding Origin of Glass Formation in Metal-Organic Frameworks.

Glass-forming metal-organic frameworks (MOFs) have novel applications, but the origin of their peculiar melting behavior is unclear. Here, we report synchrotron X-ray diffraction electron densities of two zeolitic imidazolate frameworks (ZIFs), the glass-forming Zn-ZIF-zni and the isostructural thermally decomposing Co-ZIF-zni. Electron density analysis shows that the Zn-N bonds are more ionic than the Co-N bonds, which have distinct covalent features. Variable-temperature Raman spectra reveal the onset of significant imidazolate bond weakening in Co-ZIF-zni above 673 K. Melting can be controlled by tuning the metal-ligand and imidazole bonding strength as shown from thermal analysis of nine solid-solution Cox Zn1-x -ZIF-zni (x=0.3 to 0.003) MOFs, and a mere 4 % Co-doping into Zn-ZIF-zni results in thermal decomposition instead of melting. The present findings demonstrate the key role of the metal-ligand bonds and imidazolate bonds in controlling the delicate balance between melting and decomposition processes in this class of ZIF compounds.

Tuning of bandgaps and emission properties of light-emitting diode materials through homogeneous alloying in molecular crystals.

Alloy formation is ubiquitous in inorganic materials science, and it strongly depends on the similarity between the alloyed atoms. Since molecules have widely different shapes, sizes and bonding properties, it is highly challenging to make alloyed molecular crystals. Here we report the generation of homogenous molecular alloys of organic light emitting diode materials that leads to tuning in their bandgaps and fluorescence emission. Tris(8-hydroxyquinolinato)aluminium (Alq3) and its Ga, In and Cr analogues (Gaq3, Inq3, and Crq3) form homogeneous mixed crystal phases thereby resulting in binary, ternary and even quaternary molecular alloys. The M x M'(1-x)q3 alloy crystals are investigated using X-ray diffraction, energy dispersive X-ray spectroscopy and Raman spectroscopy on single crystal samples, and photoluminescence properties are measured on the exact same single crystal specimens. The different series of alloys exhibit distinct trends in their optical bandgaps compared with their parent crystals. In the Al x Ga(1-x)q3 alloys the emission wavelengths lie in between those of the parent crystals, while the Al x In(1-x)q3 and Ga x In(1-x)q3 alloys have red shifts. Intriguingly, efficient fluorescence quenching is observed for the M x Cr(1-x)q3 alloys (M = Al, Ga) revealing the effect of paramagnetic molecular doping, and corroborating the molecular scale phase homogeneity.

Ceria Nanozyme and Phosphate Prodrugs: Drug Synthesis through Enzyme Mimicry.

Nanozymes can mimic the activities of diverse enzymes, and this ability finds applications in analytical sciences and industrial chemistry, as well as in biomedical applications. Among the latter, prodrug conversion mediated by nanozymes is investigated as a step toward site-specific drug synthesis, to achieve localized therapeutic effects. In this work, we investigated a ceria nanozyme as a mimic to phosphatase, to mediate conversion of phosphate prodrugs into corresponding therapeutics. To this end, the substrate scope of ceria as a phosphatase mimic was analyzed using a broad range of natural phosphor(di)esters and pyrophosphates. Knowledge of this scope guided the selection of existing phosphate prodrugs that can be converted by ceria into the corresponding therapeutics. "Extended scaffold phosphates" were engineered using self-immolative linkers to accommodate a prodrug design for amine-containing drugs, such as monomethyl auristatin E. Phosphate prodrugs masked activity of the toxin, whereas prodrug conversion mediated by the nanozyme restored drug toxicity, which was validated in mammalian cell culture. The main novelty of this work lies in the rational pairing of the ceria nanozyme with the existing and the de novo designed "extended scaffold" phosphate prodrugs toward their use in nanozyme-prodrug therapy based on the defined nanozyme substrate scope.

Bandgap Tuning in Molecular Alloy Crystals Formed by Weak Chalcogen Interactions.

We demonstrate systematic tuning in the optical bandgaps of molecular crystals achieved by the generation of molecular alloys/solid solutions of a series of diphenyl dichalcogenides-characterized by weak chalcogen bonding interactions involving S, Se, and Te atoms. Despite the variety in chalcogen bonding interactions found in this series of dichalcogenide crystals, they show isostructural interaction topologies, enabling the formation of solid solutions. The alloy crystals exhibit Vegard's law-like trends of variation in their unit cell dimensions and a nonlinear trend for the variation in optical bandgaps with respect to their compositions. Energy-dispersive X-ray and spatially resolved Raman spectroscopic studies indicate significant homogeneity in the domain structure of the solid solutions. Quantum periodic calculations of the projected density of states provide insights into the bandgap tuning in terms of the mixing of states in the alloy crystal phases.

Tailoring the stoichiometry of C3N4 nanosheets under electron beam irradiation.

Two-dimensional polymeric graphitic carbon nitride (g-C3N4) is a low-cost material with versatile properties that can be enhanced by the introduction of dopant atoms and by changing the degree of polymerization/stoichiometry, which offers significant benefits for numerous applications. Herein, we investigate the stability of g-C3N4 under electron beam irradiation inside a transmission electron microscope operating at different electron acceleration voltages. Our findings indicate that the degradation of g-C3N4 occurs with N species preferentially removed over C species. However, the precise nitrogen group from which N is removed from g-C3N4 (C-N-C, [double bond, length as m-dash]NH or -NH2) is unclear. Moreover, the rate of degradation increases with decreasing electron acceleration voltage, suggesting that inelastic scattering events (radiolysis) dominate over elastic events (knock-on damage). The rate of degradation by removing N atoms is also sensitive to the current density. Hence, we demonstrate that both the electron acceleration voltage and the current density are parameters with which one can use to control the stoichiometry. Moreover, as N species were preferentially removed, the d-spacing of the carbon nitride structure increased. These findings provide a deeper understanding of g-C3N4.

Strategies for synthesis of Prussian blue analogues.

We report a comparison of different common synthetic strategies for preparation of Prussian blue analogues (PBA). PBA are promising as cathode material for a number of different battery types, including K-ion and Na-ion batteries with both aqueous and non-aqueous electrolytes. PBA exhibit a significant degree of structural variation. The structure of the PBA determines the electrochemical performance, and it is, therefore, important to understand how synthesis parameters affect the structure of the obtained product. PBA are often synthesized by co-precipitation of a metal salt and a hexacyanoferrate complex, and parameters such as concentration and oxidation state of the precursors, flow rate, temperature and additional salts can all potentially affect the structure of the product. Here, we report 12 different syntheses and compare the structure of the obtained PBA materials.

Facile synthesis of brookite TiO2 nanoparticles.

Brookite is the most difficult TiO2 polymorph to obtain in phase pure form. Here we report on a facile synthesis method for phase-pure brookite nanoparticles using a broad range of titanium precursors. General availability of phase pure brookite opens up multiple research activities to explore both fundamental properties as well as applications. The synthesis method is scalable and thus it potentially allows for large-scale industrial production.

Why Does Bi2WO6 Visible-Light Photocatalyst Always Form as Nanoplatelets?

Bi2WO6 nanocrystals exhibit excellent photocatalytic properties in the visible range of the solar spectrum, and intense efforts are directed at designing effective synthesis processes with control of size, morphology, and hierarchical structure. All known hydrothermal syntheses produce either nanoplatelet morphology or hierarchical structures based on such primary entities. Here we investigate the nucleation and growth of Bi2WO6 nanocrystals under hydrothermal conditions using in situ X-ray total scattering (TS) and powder X-ray diffraction (PXRD) measurements. It is shown that the preferential growth of Bi2WO6 nanoplates is due to the presence of disordered layers of Bi2O22+ molecular complexes in the precursor solution with an approximate length of 13 Å. These layers interact with tetrahedral WO42- molecular units and eventually form the disordered cubic (Bi0.933W0.067)O1.6) crystalline phase. When enough tungsten units are intertwined between Bi2O22+ layers formation of Bi2WO6 pristine nanoplates takes place by necessary sideways addition of units in the ac plane. The experimentally observed formation mechanism suggests that the Bi/W atomic ratio must play a central role in the nucleation (assembly of initial crystal layers). Indeed, it is observed in separate continuous flow supercritical synthesis that for a stoichiometric (Bi/W = 2:1) precursor, a (Bi0.933W0.067)O1.6) impurity phase is always observed together with the main Bi2WO6 product. Excess tungsten is required in the precursor to form phase-pure Bi2WO6 material. Thus, the present study also reports a fast, scalable, and green method for production of this highly attractive photocatalyst.

Continuous flow hydrothermal synthesis of phase pure rutile TiO2 nanoparticles with a rod-like morphology.

Titania nanocrystals are used in numerous applications but specific polymorphs (anatase, rutile, brookite) are typically required in specific applications making synthesis control over the crystal phase essential. Supercritical continuous flow reactors constitute fast, scalable alternatives to conventional autoclave hydrothermal synthesis. They provide outstanding control over nanoparticle characteristics such as size, crystallinity, and morphology but previous studies have always resulted in anatase products. Here we report, for the first time, a continuous hydrothermal flow method for obtaining phase pure rutile nanoparticles thereby significantly broadening the crystal design space for large scale titania applications. Through variation of the reactor temperature, the dimensions of the rod-like rutile crystallites are tunable in a range of 35 to 60 nm in length and 10 to 35 nm in width (maximum aspect ratio of ∼3.5) leading to a tunable band gap (3.2-3.5 eV) and high specific surface areas exceeding 200 m2 g-1.

Boosting Photocatalytic Hydrogen Production by Modulating Recombination Modes and Proton Adsorption Energy.

Solar-driven production of renewable energy (e.g., H2) has been investigated for decades. To date, the applications are limited by low efficiency due to rapid charge recombination (both radiative and nonradiative modes) and slow reaction rates. Tremendous efforts have been focused on reducing the radiative recombination and enhancing the interfacial charge transfer by engineering the geometric and electronic structure of the photocatalysts. However, fine-tuning of nonradiative recombination processes and optimization of target reaction paths still lack effective control. Here we show that minimizing the nonradiative relaxation and the adsorption energy of photogenerated surface-adsorbed hydrogen atoms are essential to achieve a longer lifetime of the charge carriers and a faster reaction rate, respectively. Such control results in a 16-fold enhancement in photocatalytic H2 evolution and a 15-fold increase in photocurrent of the crystalline g-C3N4 compared to that of the amorphous g-C3N4.

Low-Barrier Hydrogen Bonds in Negative Thermal Expansion Material H3 [Co(CN)6 ].

The covalent nature of the low-barrier N-H-N hydrogen bonds in the negative thermal expansion material H3 [Co(CN)6 ] has been established by using a combination of X-ray and neutron diffraction electron density analysis and theoretical calculations. This finding explains why negative thermal expansion can occur in a material not commonly considered to be built from rigid linkers. The pertinent hydrogen atom is located symmetrically between two nitrogen atoms in a double-well potential with hydrogen above the barrier for proton transfer, thus forming a low-barrier hydrogen bond. Hydrogen is covalently bonded to the two nitrogen atoms, which is the first experimentally confirmed covalent hydrogen bond in a network structure. Source function calculations established that the present N-H-N hydrogen bond follows the trends observed for negatively charge-assisted hydrogen bonds and low-barrier hydrogen bonds previously established for O-H-O hydrogen bonds. The bonding between the cobalt and cyanide ligands was found to be a typical donor-acceptor bond involving a high-field ligand and a transition metal in a low-spin configuration.

Three-dimensional morphology of anatase nanocrystals obtained from supercritical flow synthesis with industrial grade TiOSO4 precursor.

Anatase TiO2 (a-TiO2) nanocrystals are vital in catalytic applications both as catalysts (e.g. photodegradation) and as a carrier material (e.g. NOx removal from exhaust). The synthesis of a-TiO2 nanocrystals and their properties have been heavily scrutinized, but there exists a clear gap between the scientific literature, and the scale and price expectation of industrial application. Here it is demonstrated that the industrially most attractive Ti precursor, titanyl sulfate (TiOSO4), can be combined with the green, scalable and fast supercritical flow method to produce phase pure and highly crystalline a-TiO2 nanoparticles with high specific surface area. Control of the nanocrystal morphology is important since it is known that certain facets substantially promote catalytic activity. It is, however, in itself challenging to determine nanocrystal morphology to provide a rational basis for the synthesis control. Here we advocate the use of advanced Rietveld refinement of powder X-ray diffraction data including anisotropic size broadening models in aiding to establish the sample three-dimensional morphology. This relatively quick and robust method assists in overcoming the often encountered ambiguity inherent in two-dimensional to three-dimensional reconstruction of selected particle morphologies with transmission electron microscopy and tomography techniques.

Accessing the rich carbon nitride materials chemistry by heat treatments of ammonium thiocyanate, NH4SCN.

Carbon nitride materials include functional materials, and their chemical diversity and complexity are becoming increasingly appreciated. Heating of NH4SCN leads to a range of new carbon nitride compounds, which have been structurally characterized by single-crystal X-ray diffraction. Heating at ambient pressure to 175°C leads to guanidinium thiocyanate, H6CN3SCN (1), and when maintaining that temperature for about 12 h a water-insoluble carbon nitride product is formed, which is a co-crystal between melamine and melamium thiocyanate, [H6C3N6]·[H10C6N11]+·[SCN]- (2). In situ powder X-ray diffraction measurements of this material reveal a gradual transformation from (2), via two intermediate products, to a final melon-like end product. The first of these forms between 350 and 400°C, and is an adduct of melam and melamium thiocyanate, [H9C6N11]·2[H10C6N11]+·2[SCN]- (3). The second forms between 400 and 480°C, and is identified as melem, 2,5,8-triamino-tri-s-triazine, H6C6N10 (4). On heating of (2) in a sealed ampoule to 600°C, various crystals were obtained and six crystal structures were determined from the batch: 1,3,5-triazine-2,4,6-triamino, H6C3N6 (5), 1,3,5-triazine-2,4-diamino, H5C3N5 (6), 1,1',3,3',5,5'-triazine-2,2',4,4'-tetraamino, H8C6N10 (7), 2[H6C3N6]·[H10C6N11]+·[SCN]- (8) and 2[H6C3N6]·[H7C3N6]+·[SCN]- (9). Finally, a recrystallized decomposition product was found to be [H6C3N6]·[H7C3N6]+·[SCN]-·[H2O] (10).

Enhancement of magnetic properties through morphology control of SrFe12O19 nanocrystallites.

Nanocrystallites of the permanent magnetic material SrFe12O19 were synthesised using a conventional sol-gel (CSG) and a modified sol-gel (MSG) synthesis route. In the MSG synthesis, crystallite growth takes place in a solid NaCl matrix, resulting in freestanding nanocrystallites, as opposed to the CSG synthesis, where the produced nanocrystals are strongly intergrown. The resulting nanocrystallites from both methods exhibit similar intrinsic magnetic properties, but significantly different morphology and degree of aggregation. The nanocrystallites were compacted into dense pellets using a Spark Plasma Sintering (SPS) press, this allows investigating the influence of crystallite morphology and the alignment of the nanocrystallites on the magnetic performance. A remarkable correlation was observed between the crystallites morphology and their ability to align in the compaction process. Consequently, a significant enhancement of the maximum energy product was obtained after SPS for the MSG prepared sample (22.0 kJ/m3), compared to CSG sample, which achieved an energy product of 11.6 kJ/m3.

Hydrothermal Synthesis of TiO2@SnO2 Hybrid Nanoparticles in a Continuous-Flow Dual-Stage Reactor.

TiO2@SnO2 hybrid nanocomposites were successfully prepared in gram scale using a dual-stage hydrothermal continuous-flow reactor. Temperature and pH in the secondary reactor were found to selectively direct nucleation and growth of the secondary material into either heterogeneous nanocomposites or separate intermixed nanoparticles. At low pH, 2 nm rutile SnO2 nanoparticles were deposited on 9 nm anatase TiO2 particles; the presence of TiO2 was found to suppress formation of larger SnO2 particles. At high pH SnO2 formed separate particles and no deposition on TiO2 was observed. Ball-milling of TiO2 and SnO2 produced no TiO2@SnO2 composites. This verifies that the composite particles must be formed by nucleation and growth of the secondary precursor on the TiO2 . High concentration of secondary precursor led to formation of TiO2 particles embedded in aggregates of SnO2 nanoparticles. The results demonstrate how nanocomposites may be produced in high yield by green chemistry.